ASoC: twl6040: Support for vibra output paths

twl6040 have two vibra output drivers.
They can be operated with audio stream coming through
the PDM interface (fifth channel).
The vibra outputs can be controlled via the input/FF
driver as well.
Selection between the two mode is implemented within
the codec driver, the input/FF driver can only operate if
the routing is set to "Input FF".
Changing from "Input FF" to "Audio PDM" mode is protected
as well: The switchin can only be done, if there is no
running effect from the input/FF.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/codecs/twl6040.c

@@ -803,6 +803,23 @@ static int twl6040_get_volsw(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int twl6040_soc_dapm_put_vibra_enum(struct snd_kcontrol *kcontrol,
+	struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_dapm_widget_list *wlist = snd_kcontrol_chip(kcontrol);
+	struct snd_soc_dapm_widget *widget = wlist->widgets[0];
+	struct snd_soc_codec *codec = widget->codec;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
+	unsigned int val;
+
+	/* Do not allow changes while Input/FF efect is running */
+	val = twl6040_read_reg_volatile(codec, e->reg);
+	if (val & TWL6040_VIBENA && !(val & TWL6040_VIBSEL))
+		return -EBUSY;
+
+	return snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
+}
+
 /*
  * MICATT volume control:
  * from -6 to 0 dB in 6 dB steps
@@ -874,6 +891,19 @@ static const struct soc_enum twl6040_hf_enum[] = {
 			twl6040_hf_texts),
 };
 
+static const char *twl6040_vibrapath_texts[] = {
+	"Input FF", "Audio PDM"
+};
+
+static const struct soc_enum twl6040_vibra_enum[] = {
+	SOC_ENUM_SINGLE(TWL6040_REG_VIBCTLL, 1,
+			ARRAY_SIZE(twl6040_vibrapath_texts),
+			twl6040_vibrapath_texts),
+	SOC_ENUM_SINGLE(TWL6040_REG_VIBCTLR, 1,
+			ARRAY_SIZE(twl6040_vibrapath_texts),
+			twl6040_vibrapath_texts),
+};
+
 static const struct snd_kcontrol_new amicl_control =
 	SOC_DAPM_ENUM("Route", twl6040_enum[0]);
 
@@ -903,6 +933,17 @@ static const struct snd_kcontrol_new auxl_switch_control =
 static const struct snd_kcontrol_new auxr_switch_control =
 	SOC_DAPM_SINGLE("Switch", TWL6040_REG_HFRCTL, 6, 1, 0);
 
+/* Vibra playback switches */
+static const struct snd_kcontrol_new vibral_mux_controls =
+	SOC_DAPM_ENUM_EXT("Route", twl6040_vibra_enum[0],
+		snd_soc_dapm_get_enum_double,
+		twl6040_soc_dapm_put_vibra_enum);
+
+static const struct snd_kcontrol_new vibrar_mux_controls =
+	SOC_DAPM_ENUM_EXT("Route", twl6040_vibra_enum[1],
+		snd_soc_dapm_get_enum_double,
+		twl6040_soc_dapm_put_vibra_enum);
+
 /* Headset power mode */
 static const char *twl6040_power_mode_texts[] = {
 	"Low-Power", "High-Perfomance",
@@ -1024,6 +1065,8 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 	SND_SOC_DAPM_OUTPUT("EP"),
 	SND_SOC_DAPM_OUTPUT("AUXL"),
 	SND_SOC_DAPM_OUTPUT("AUXR"),
+	SND_SOC_DAPM_OUTPUT("VIBRAL"),
+	SND_SOC_DAPM_OUTPUT("VIBRAR"),
 
 	/* Analog input muxes for the capture amplifiers */
 	SND_SOC_DAPM_MUX("Analog Left Capture Route",
@@ -1076,6 +1119,9 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 			TWL6040_REG_HFRCTL, 0, 0,
 			twl6040_power_mode_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	/* Virtual DAC for vibra path (DL4 channel) */
+	SND_SOC_DAPM_DAC("VIBRA DAC", "Vibra Playback",
+			SND_SOC_NOPM, 0, 0),
 
 	SND_SOC_DAPM_MUX("Handsfree Left Playback",
 			SND_SOC_NOPM, 0, 0, &hfl_mux_controls),
@@ -1087,6 +1133,11 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 	SND_SOC_DAPM_MUX("Headset Right Playback",
 			SND_SOC_NOPM, 0, 0, &hsr_mux_controls),
 
+	SND_SOC_DAPM_MUX("Vibra Left Playback", SND_SOC_NOPM, 0, 0,
+			&vibral_mux_controls),
+	SND_SOC_DAPM_MUX("Vibra Right Playback", SND_SOC_NOPM, 0, 0,
+			&vibrar_mux_controls),
+
 	SND_SOC_DAPM_SWITCH("Earphone Playback", SND_SOC_NOPM, 0, 0,
 			&ep_path_enable_control),
 	SND_SOC_DAPM_SWITCH("AUXL Playback", SND_SOC_NOPM, 0, 0,
@@ -1115,6 +1166,15 @@ static const struct snd_soc_dapm_widget twl6040_dapm_widgets[] = {
 			TWL6040_REG_EARCTL, 0, 0, NULL, 0,
 			twl6040_power_mode_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
+	SND_SOC_DAPM_OUT_DRV("Vibra Left Driver",
+			TWL6040_REG_VIBCTLL, 0, 0, NULL, 0),
+	SND_SOC_DAPM_OUT_DRV("Vibra Right Driver",
+			TWL6040_REG_VIBCTLR, 0, 0, NULL, 0),
+
+	SND_SOC_DAPM_SUPPLY("Vibra Left Control", TWL6040_REG_VIBCTLL, 2, 0,
+			    NULL, 0),
+	SND_SOC_DAPM_SUPPLY("Vibra Right Control", TWL6040_REG_VIBCTLR, 2, 0,
+			    NULL, 0),
 
 	/* Analog playback PGAs */
 	SND_SOC_DAPM_PGA("HF Left PGA",
@@ -1181,6 +1241,18 @@ static const struct snd_soc_dapm_route intercon[] = {
 
 	{"AUXL", NULL, "AUXL Playback"},
 	{"AUXR", NULL, "AUXR Playback"},
+
+	/* Vibrator paths */
+	{"Vibra Left Playback", "Audio PDM", "VIBRA DAC"},
+	{"Vibra Right Playback", "Audio PDM", "VIBRA DAC"},
+
+	{"Vibra Left Driver", NULL, "Vibra Left Playback"},
+	{"Vibra Right Driver", NULL, "Vibra Right Playback"},
+	{"Vibra Left Driver", NULL, "Vibra Left Control"},
+	{"Vibra Right Driver", NULL, "Vibra Right Control"},
+
+	{"VIBRAL", NULL, "Vibra Left Driver"},
+	{"VIBRAR", NULL, "Vibra Right Driver"},
 };
 
 static int twl6040_set_bias_level(struct snd_soc_codec *codec,