AT91: at91sam9m10g45ek: use the right machine id

Today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK
now will use only AT91SAM9M10G45EK.

The other boards revision will be specified via system_rev.

for 9g45ekes, m10g45ekes and m10g45ek boards and revisions
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

arch/arm/mach-at91/Kconfig

@@ -383,8 +383,8 @@ if ARCH_AT91SAM9G45
 
 comment "AT91SAM9G45 Board Type"
 
-config MACH_AT91SAM9G45EKES
-	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+config MACH_AT91SAM9M10G45EK
+	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
 	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.

arch/arm/mach-at91/Makefile

@@ -70,7 +70,7 @@ obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
 
 # AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -399,7 +399,7 @@ static void __init ek_board_init(void)
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
-MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,