Commit 680cbbbb authored by Dave Peterson's avatar Dave Peterson Committed by Linus Torvalds

[PATCH] EDAC: name cleanup

Perform the following name substitutions on all source files:

    sed 's/BS_MOD_STR/EDAC_MOD_STR/g'
    sed 's/bs_thread_info/edac_thread_info/g'
    sed 's/bs_thread/edac_thread/g'
    sed 's/bs_xstr/edac_xstr/g'
    sed 's/bs_str/edac_str/g'

The names that start with BS_ or bs_ are artifacts of when the code
was called "bluesmoke".
Signed-off-by: default avatarDavid S. Peterson <dsp@llnl.gov>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 537fba28
......@@ -233,7 +233,7 @@ static int amd76x_probe1(struct pci_dev *pdev, int dev_idx)
mci->edac_cap = ems_mode ?
(EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_NONE;
mci->mod_name = BS_MOD_STR;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.4.2.5 $";
mci->ctl_name = amd76x_devs[dev_idx].ctl_name;
mci->edac_check = amd76x_check;
......@@ -339,7 +339,7 @@ MODULE_DEVICE_TABLE(pci, amd76x_pci_tbl);
static struct pci_driver amd76x_driver = {
.name = BS_MOD_STR,
.name = EDAC_MOD_STR,
.probe = amd76x_init_one,
.remove = __devexit_p(amd76x_remove_one),
.id_table = amd76x_pci_tbl,
......
......@@ -788,7 +788,7 @@ static int e752x_probe1(struct pci_dev *pdev, int dev_idx)
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED |
EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
mci->mod_name = BS_MOD_STR;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->pdev = pdev;
......@@ -1043,7 +1043,7 @@ MODULE_DEVICE_TABLE(pci, e752x_pci_tbl);
static struct pci_driver e752x_driver = {
.name = BS_MOD_STR,
.name = EDAC_MOD_STR,
.probe = e752x_init_one,
.remove = __devexit_p(e752x_remove_one),
.id_table = e752x_pci_tbl,
......
......@@ -383,7 +383,7 @@ static int e7xxx_probe1(struct pci_dev *pdev, int dev_idx)
mci->edac_ctl_cap =
EDAC_FLAG_NONE | EDAC_FLAG_SECDED | EDAC_FLAG_S4ECD4ED;
/* FIXME - what if different memory types are in different csrows? */
mci->mod_name = BS_MOD_STR;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.9 $";
mci->pdev = pdev;
......@@ -536,7 +536,7 @@ MODULE_DEVICE_TABLE(pci, e7xxx_pci_tbl);
static struct pci_driver e7xxx_driver = {
.name = BS_MOD_STR,
.name = EDAC_MOD_STR,
.probe = e7xxx_init_one,
.remove = __devexit_p(e7xxx_remove_one),
.id_table = e7xxx_pci_tbl,
......
......@@ -80,9 +80,9 @@ extern int edac_debug_level;
#endif /* !CONFIG_EDAC_DEBUG */
#define bs_xstr(s) bs_str(s)
#define bs_str(s) #s
#define BS_MOD_STR bs_xstr(KBUILD_BASENAME)
#define edac_xstr(s) edac_str(s)
#define edac_str(s) #s
#define EDAC_MOD_STR edac_xstr(KBUILD_BASENAME)
#define BIT(x) (1 << (x))
......
......@@ -162,7 +162,7 @@ static int i82860_probe1(struct pci_dev *pdev, int dev_idx)
mci->edac_cap = EDAC_FLAG_SECDED;
/* adjust FLAGS */
mci->mod_name = BS_MOD_STR;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.1.2.6 $";
mci->ctl_name = i82860_devs[dev_idx].ctl_name;
mci->edac_check = i82860_check;
......@@ -253,7 +253,7 @@ static const struct pci_device_id i82860_pci_tbl[] __devinitdata = {
MODULE_DEVICE_TABLE(pci, i82860_pci_tbl);
static struct pci_driver i82860_driver = {
.name = BS_MOD_STR,
.name = EDAC_MOD_STR,
.probe = i82860_init_one,
.remove = __devexit_p(i82860_remove_one),
.id_table = i82860_pci_tbl,
......
......@@ -357,7 +357,7 @@ static int i82875p_probe1(struct pci_dev *pdev, int dev_idx)
mci->edac_cap = EDAC_FLAG_UNKNOWN;
/* adjust FLAGS */
mci->mod_name = BS_MOD_STR;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.5.2.11 $";
mci->ctl_name = i82875p_devs[dev_idx].ctl_name;
mci->edac_check = i82875p_check;
......@@ -483,7 +483,7 @@ MODULE_DEVICE_TABLE(pci, i82875p_pci_tbl);
static struct pci_driver i82875p_driver = {
.name = BS_MOD_STR,
.name = EDAC_MOD_STR,
.probe = i82875p_init_one,
.remove = __devexit_p(i82875p_remove_one),
.id_table = i82875p_pci_tbl,
......
......@@ -265,7 +265,7 @@ static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
} else
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = BS_MOD_STR;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = "$Revision: 1.1.2.6 $";
mci->ctl_name = "R82600";
mci->edac_check = r82600_check;
......@@ -376,7 +376,7 @@ MODULE_DEVICE_TABLE(pci, r82600_pci_tbl);
static struct pci_driver r82600_driver = {
.name = BS_MOD_STR,
.name = EDAC_MOD_STR,
.probe = r82600_init_one,
.remove = __devexit_p(r82600_remove_one),
.id_table = r82600_pci_tbl,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment