habanalabs: remove variable 'val' set but not used

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/misc/habanalabs/goya/goya.c: In function goya_pldm_init_cpu:
drivers/misc/habanalabs/goya/goya.c:2195:6: warning: variable val set but not used [-Wunused-but-set-variable]
drivers/misc/habanalabs/goya/goya.c: In function goya_hw_init:
drivers/misc/habanalabs/goya/goya.c:2505:6: warning: variable val set but not used [-Wunused-but-set-variable]

Fixes: 9494a8dd ("habanalabs: add h/w queues module")
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>

drivers/misc/habanalabs/goya/goya.c

@@ -2192,7 +2192,7 @@ static int goya_push_linux_to_device(struct hl_device *hdev)
 
 static int goya_pldm_init_cpu(struct hl_device *hdev)
 {
-	u32 val, unit_rst_val;
+	u32 unit_rst_val;
 	int rc;
 
 	/* Must initialize SRAM scrambler before pushing u-boot to SRAM */
@@ -2200,14 +2200,14 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
 
 	/* Put ARM cores into reset */
 	WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL, CPU_RESET_ASSERT);
-	val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
+	RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
 
 	/* Reset the CA53 MACRO */
 	unit_rst_val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 	WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, CA53_RESET);
-	val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
+	RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 	WREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N, unit_rst_val);
-	val = RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
+	RREG32(mmPSOC_GLOBAL_CONF_UNIT_RST_N);
 
 	rc = goya_push_uboot_to_device(hdev);
 	if (rc)
@@ -2228,7 +2228,7 @@ static int goya_pldm_init_cpu(struct hl_device *hdev)
 	/* Release ARM core 0 from reset */
 	WREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL,
 					CPU_RESET_CORE0_DEASSERT);
-	val = RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
+	RREG32(mmCPU_CA53_CFG_ARM_RST_CONTROL);
 
 	return 0;
 }
@@ -2502,13 +2502,12 @@ int goya_mmu_init(struct hl_device *hdev)
 static int goya_hw_init(struct hl_device *hdev)
 {
 	struct asic_fixed_properties *prop = &hdev->asic_prop;
-	u32 val;
 	int rc;
 
 	dev_info(hdev->dev, "Starting initialization of H/W\n");
 
 	/* Perform read from the device to make sure device is up */
-	val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+	RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
 
 	/*
 	 * Let's mark in the H/W that we have reached this point. We check
@@ -2560,7 +2559,7 @@ static int goya_hw_init(struct hl_device *hdev)
 		goto disable_queues;
 
 	/* Perform read from the device to flush all MSI-X configuration */
-	val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+	RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
 
 	return 0;