[SCSI] lpfc 8.3.5: fix sysfs parameters, vport creation and other bugs and update logging

This patch include the following fixes and changes:
- Fix crash when "error" is echoed to board_mode sysfs parameter
- Fix FCoE Parameter parsing in regions 23
- Fix driver crash when creating vport with large number of targets on SLI4
- Fix bug with npiv message being logged when it is not supported by the adapter
- Fix a potential dereferencing mailbox structure after free bug
- Fix firmware crash after vport create with high target count
- Error out requests to set board_mode to warm restart via sysfs on SLI4 HBAs
- Fix Block guard logging
- Fix a memory corruption issue during GID_FT IO prep
- Fix crash while processing unsolicited FC frames
- Fix failed to allocate XRI message is not a critical failure
- Update and fix formatting in some log messages
- Fix missing new line characters in log messages
- Removed the use of the locally defined FC transport layer related macros
- Check the rsplen in lpfc_handle_fcp_err function before using rsplen
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

drivers/scsi/lpfc/lpfc_attr.c

@@ -29,6 +29,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
 
 #include "lpfc_hw4.h"
 #include "lpfc_hw.h"
@@ -762,8 +763,14 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
 	} else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
 	else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			return -EINVAL;
+		else
 			status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);
 	else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			return -EINVAL;
+		else
 			status = lpfc_do_offline(phba, LPFC_EVT_KILL);
 	else
 		return -EINVAL;
@@ -2846,7 +2853,7 @@ LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary "
 # identifies what rctl value to configure the additional ring for.
 # Value range is [1,0xff]. Default value is 4 (Unsolicated Data).
 */
-LPFC_ATTR_R(multi_ring_rctl, FC_UNSOL_DATA, 1,
+LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1,
 	     255, "Identifies RCTL for additional ring configuration");
 
 /*
@@ -2854,7 +2861,7 @@ LPFC_ATTR_R(multi_ring_rctl, FC_UNSOL_DATA, 1,
 # identifies what type value to configure the additional ring for.
 # Value range is [1,0xff]. Default value is 5 (LLC/SNAP).
 */
-LPFC_ATTR_R(multi_ring_type, FC_LLC_SNAP, 1,
+LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
 	     255, "Identifies TYPE for additional ring configuration");
 
 /*

drivers/scsi/lpfc/lpfc_bsg.c

@@ -26,6 +26,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
 #include <scsi/scsi_bsg_fc.h>
+#include <scsi/fc/fc_fs.h>
 
 #include "lpfc_hw4.h"
 #include "lpfc_hw.h"
@@ -148,8 +149,8 @@ lpfc_bsg_rport_ct(struct fc_bsg_job *job)
 	cmd->ulpCommand = CMD_GEN_REQUEST64_CR;
 	cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
 	cmd->un.genreq64.w5.hcsw.Dfctl = 0;
-	cmd->un.genreq64.w5.hcsw.Rctl = FC_UNSOL_CTL;
-	cmd->un.genreq64.w5.hcsw.Type = FC_COMMON_TRANSPORT_ULP;
+	cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+	cmd->un.genreq64.w5.hcsw.Type = FC_TYPE_CT;
 	cmd->ulpBdeCount = 1;
 	cmd->ulpLe = 1;
 	cmd->ulpClass = CLASS3;

drivers/scsi/lpfc/lpfc_ct.c

@@ -31,6 +31,7 @@
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_transport_fc.h>
+#include <scsi/fc/fc_fs.h>
 
 #include "lpfc_hw4.h"
 #include "lpfc_hw.h"
@@ -336,8 +337,8 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp,
 	/* Fill in rest of iocb */
 	icmd->un.genreq64.w5.hcsw.Fctl = (SI | LA);
 	icmd->un.genreq64.w5.hcsw.Dfctl = 0;
-	icmd->un.genreq64.w5.hcsw.Rctl = FC_UNSOL_CTL;
-	icmd->un.genreq64.w5.hcsw.Type = FC_COMMON_TRANSPORT_ULP;
+	icmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL;
+	icmd->un.genreq64.w5.hcsw.Type = FC_TYPE_CT;
 
 	if (!tmo) {
 		 /* FC spec states we need 3 * ratov for CT requests */
@@ -395,9 +396,14 @@ lpfc_ct_cmd(struct lpfc_vport *vport, struct lpfc_dmabuf *inmp,
 	outmp = lpfc_alloc_ct_rsp(phba, cmdcode, bpl, rsp_size, &cnt);
 	if (!outmp)
 		return -ENOMEM;
-
+	/*
+	 * Form the CT IOCB.  The total number of BDEs in this IOCB
+	 * is the single command plus response count from
+	 * lpfc_alloc_ct_rsp.
+	 */
+	cnt += 1;
 	status = lpfc_gen_req(vport, bmp, inmp, outmp, cmpl, ndlp, 0,
-			      cnt+1, 0, retry);
+			      cnt, 0, retry);
 	if (status) {
 		lpfc_free_ct_rsp(phba, outmp);
 		return -ENOMEM;
@@ -533,6 +539,9 @@ lpfc_ns_rsp(struct lpfc_vport *vport, struct lpfc_dmabuf *mp, uint32_t Size)
 							SLI_CTNS_GFF_ID,
 							0, Did) == 0)
 							vport->num_disc_nodes++;
+						else
+							lpfc_setup_disc_node
+								(vport, Did);
 					}
 					else {
 						lpfc_debugfs_disc_trc(vport,
@@ -1241,7 +1250,7 @@ lpfc_ns_cmd(struct lpfc_vport *vport, int cmdcode,
 		    be16_to_cpu(SLI_CTNS_RFF_ID);
 		CtReq->un.rff.PortId = cpu_to_be32(vport->fc_myDID);
 		CtReq->un.rff.fbits = FC4_FEATURE_INIT;
-		CtReq->un.rff.type_code = FC_FCP_DATA;
+		CtReq->un.rff.type_code = FC_TYPE_FCP;
 		cmpl = lpfc_cmpl_ct_cmd_rff_id;
 		break;
 	}

drivers/scsi/lpfc/lpfc_debugfs.c

@@ -926,7 +926,7 @@ lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file)
 		goto out;
 
 	/* Round to page boundry */
-	printk(KERN_ERR "BLKGRD %s: _dump_buf_data=0x%p\n",
+	printk(KERN_ERR "9059 BLKGRD:  %s: _dump_buf_data=0x%p\n",
 			__func__, _dump_buf_data);
 	debug->buffer = _dump_buf_data;
 	if (!debug->buffer) {
@@ -956,8 +956,8 @@ lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file)
 		goto out;
 
 	/* Round to page boundry */
-	printk(KERN_ERR "BLKGRD %s: _dump_buf_dif=0x%p file=%s\n", __func__,
-	       _dump_buf_dif, file->f_dentry->d_name.name);
+	printk(KERN_ERR	"9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n",
+		__func__, _dump_buf_dif, file->f_dentry->d_name.name);
 	debug->buffer = _dump_buf_dif;
 	if (!debug->buffer) {
 		kfree(debug);
@@ -1377,7 +1377,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			debugfs_create_dir(name, phba->hba_debugfs_root);
 		if (!vport->vport_debugfs_root) {
 			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-					 "0417 Cant create debugfs");
+					 "0417 Cant create debugfs\n");
 			goto debug_failed;
 		}
 		atomic_inc(&phba->debugfs_vport_count);
@@ -1430,7 +1430,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				 vport, &lpfc_debugfs_op_nodelist);
 	if (!vport->debug_nodelist) {
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-				 "0409 Cant create debugfs nodelist");
+				 "0409 Cant create debugfs nodelist\n");
 		goto debug_failed;
 	}
 debug_failed:

drivers/scsi/lpfc/lpfc_disc.h

@@ -19,7 +19,7 @@
  *******************************************************************/
 
 #define FC_MAX_HOLD_RSCN     32	      /* max number of deferred RSCNs */
-#define FC_MAX_NS_RSP        65536    /* max size NameServer rsp */
+#define FC_MAX_NS_RSP        64512    /* max size NameServer rsp */
 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */
 #define LPFC_DISC_FLOGI_TMO  10	      /* Discovery FLOGI ratov */
 

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -1699,8 +1699,7 @@ lpfc_init_vpi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 		lpfc_initial_fdisc(vport);
 	else {
 		lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
-		lpfc_printf_vlog(vport, KERN_ERR,
-			LOG_ELS,
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
 				 "2606 No NPIV Fabric support\n");
 	}
 	return;
@@ -1901,7 +1900,10 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 	if (phba->fc_topology == TOPOLOGY_LOOP) {
 		phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
 
-		if (phba->cfg_enable_npiv)
+		/* if npiv is enabled and this adapter supports npiv log
+		 * a message that npiv is not supported in this topology
+		 */
+		if (phba->cfg_enable_npiv && phba->max_vpi)
 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
 				"1309 Link Up Event npiv not supported in loop "
 				"topology\n");
@@ -3118,7 +3120,7 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	struct lpfc_sli *psli;
 	struct lpfc_sli_ring *pring;
 	struct lpfc_iocbq *iocb, *next_iocb;
-	uint32_t rpi, i;
+	uint32_t i;
 
 	lpfc_fabric_abort_nport(ndlp);
 
@@ -3127,7 +3129,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	 * by firmware with a no rpi error.
 	 */
 	psli = &phba->sli;
-	rpi = ndlp->nlp_rpi;
 	if (ndlp->nlp_flag & NLP_RPI_VALID) {
 		/* Now process each ring */
 		for (i = 0; i < psli->num_rings; i++) {

drivers/scsi/lpfc/lpfc_hw.h

@@ -1124,21 +1124,6 @@ typedef struct {
 /* Number of 4-byte words in an IOCB. */
 #define IOCB_WORD_SZ    8
 
-/* defines for type field in fc header */
-#define FC_ELS_DATA     0x1
-#define FC_LLC_SNAP     0x5
-#define FC_FCP_DATA     0x8
-#define FC_COMMON_TRANSPORT_ULP 0x20
-
-/* defines for rctl field in fc header */
-#define FC_DEV_DATA     0x0
-#define FC_UNSOL_CTL    0x2
-#define FC_SOL_CTL      0x3
-#define FC_UNSOL_DATA   0x4
-#define FC_FCP_CMND     0x6
-#define FC_ELS_REQ      0x22
-#define FC_ELS_RSP      0x23
-
 /* network headers for Dfctl field */
 #define FC_NET_HDR      0x20
 

drivers/scsi/lpfc/lpfc_init.c

@@ -3004,8 +3004,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 		spin_unlock_irq(&phba->hbalock);
 
 		/* Read the FCF table and re-discover SAN. */
-		rc = lpfc_sli4_read_fcf_record(phba,
-			LPFC_FCOE_FCF_GET_FIRST);
+		rc = lpfc_sli4_read_fcf_record(phba, LPFC_FCOE_FCF_GET_FIRST);
 		if (rc)
 			lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
 					"2547 Read FCF record failed 0x%x\n",
@@ -3021,7 +3020,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 
 	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
 		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
-			"2549 FCF disconnected fron network index 0x%x"
+			"2549 FCF disconnected from network index 0x%x"
 			" tag 0x%x\n", acqe_fcoe->index,
 			acqe_fcoe->event_tag);
 		/* If the event is not for currently used fcf do nothing */
@@ -3917,7 +3916,7 @@ lpfc_free_sgl_list(struct lpfc_hba *phba)
 	rc = lpfc_sli4_remove_all_sgl_pages(phba);
 	if (rc) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-			"2005 Unable to deregister pages from HBA: %x", rc);
+			"2005 Unable to deregister pages from HBA: %x\n", rc);
 	}
 	kfree(phba->sli4_hba.lpfc_els_sgl_array);
 }
@@ -4366,7 +4365,8 @@ lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
 			_dump_buf_data =
 				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
 			if (_dump_buf_data) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9043 BLKGRD: allocated %d pages for "
 				       "_dump_buf_data at 0x%p\n",
 				       (1 << pagecnt), _dump_buf_data);
 				_dump_buf_data_order = pagecnt;
@@ -4377,17 +4377,20 @@ lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
 				--pagecnt;
 		}
 		if (!_dump_buf_data_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+				"9044 BLKGRD: ERROR unable to allocate "
 			       "memory for hexdump\n");
 	} else
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_data=0x%p"
+		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+			"9045 BLKGRD: already allocated _dump_buf_data=0x%p"
 		       "\n", _dump_buf_data);
 	if (!_dump_buf_dif) {
 		while (pagecnt) {
 			_dump_buf_dif =
 				(char *) __get_free_pages(GFP_KERNEL, pagecnt);
 			if (_dump_buf_dif) {
-				printk(KERN_ERR "BLKGRD allocated %d pages for "
+				lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+					"9046 BLKGRD: allocated %d pages for "
 				       "_dump_buf_dif at 0x%p\n",
 				       (1 << pagecnt), _dump_buf_dif);
 				_dump_buf_dif_order = pagecnt;
@@ -4398,10 +4401,12 @@ lpfc_setup_bg(struct lpfc_hba *phba, struct Scsi_Host *shost)
 				--pagecnt;
 		}
 		if (!_dump_buf_dif_order)
-			printk(KERN_ERR "BLKGRD ERROR unable to allocate "
+			lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+			"9047 BLKGRD: ERROR unable to allocate "
 			       "memory for hexdump\n");
 	} else
-		printk(KERN_ERR "BLKGRD already allocated _dump_buf_dif=0x%p\n",
+		lpfc_printf_log(phba, KERN_ERR, LOG_BG,
+			"9048 BLKGRD: already allocated _dump_buf_dif=0x%p\n",
 		       _dump_buf_dif);
 }
 
@@ -5072,10 +5077,9 @@ lpfc_sli4_queue_create(struct lpfc_hba *phba)
 	/* It does not make sense to have more EQs than WQs */
 	if (cfg_fcp_eq_count > phba->cfg_fcp_wq_count) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
-				"2593 The number of FCP EQs (%d) is more "
-				"than the number of FCP WQs (%d), take "
-				"the number of FCP EQs same as than of "
-				"WQs (%d)\n", cfg_fcp_eq_count,
+				"2593 The FCP EQ count(%d) cannot be greater "
+				"than the FCP WQ count(%d), limiting the "
+				"FCP EQ count to %d\n", cfg_fcp_eq_count,
 				phba->cfg_fcp_wq_count,
 				phba->cfg_fcp_wq_count);
 		cfg_fcp_eq_count = phba->cfg_fcp_wq_count;
@@ -7271,15 +7275,15 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
 
 	if (phba->sli_rev == LPFC_SLI_REV4) {
 		if (max_xri <= 100)
-			return 4;
+			return 10;
 		else if (max_xri <= 256)
-			return 8;
+			return 25;
 		else if (max_xri <= 512)
-			return 16;
+			return 50;
 		else if (max_xri <= 1024)
-			return 32;
+			return 100;
 		else
-			return 48;
+			return 150;
 	} else
 		return 0;
 }
@@ -8117,15 +8121,15 @@ lpfc_exit(void)
 	if (lpfc_enable_npiv)
 		fc_release_transport(lpfc_vport_transport_template);
 	if (_dump_buf_data) {
-		printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_data "
-				"at 0x%p\n",
+		printk(KERN_ERR	"9062 BLKGRD: freeing %lu pages for "
+				"_dump_buf_data at 0x%p\n",
 				(1L << _dump_buf_data_order), _dump_buf_data);
 		free_pages((unsigned long)_dump_buf_data, _dump_buf_data_order);
 	}
 
 	if (_dump_buf_dif) {
-		printk(KERN_ERR "BLKGRD freeing %lu pages for _dump_buf_dif "
-				"at 0x%p\n",
+		printk(KERN_ERR	"9049 BLKGRD: freeing %lu pages for "
+				"_dump_buf_dif at 0x%p\n",
 				(1L << _dump_buf_dif_order), _dump_buf_dif);
 		free_pages((unsigned long)_dump_buf_dif, _dump_buf_dif_order);
 	}

drivers/scsi/lpfc/lpfc_mbox.c

@@ -25,8 +25,8 @@
 
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_transport_fc.h>
-
 #include <scsi/scsi.h>
+#include <scsi/fc/fc_fs.h>
 
 #include "lpfc_hw4.h"
 #include "lpfc_hw.h"
@@ -1135,7 +1135,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
 	/* Otherwise we setup specific rctl / type masks for this ring */
 	for (i = 0; i < pring->num_mask; i++) {
 		mb->un.varCfgRing.rrRegs[i].rval = pring->prt[i].rctl;
-		if (mb->un.varCfgRing.rrRegs[i].rval != FC_ELS_REQ)
+		if (mb->un.varCfgRing.rrRegs[i].rval != FC_RCTL_ELS_REQ)
 			mb->un.varCfgRing.rrRegs[i].rmask = 0xff;
 		else
 			mb->un.varCfgRing.rrRegs[i].rmask = 0xfe;
@@ -1657,9 +1657,12 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
 	/* Allocate record for keeping SGE virtual addresses */
 	mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt),
 				  GFP_KERNEL);
-	if (!mbox->sge_array)
+	if (!mbox->sge_array) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"2527 Failed to allocate non-embedded SGE "
+				"array.\n");
 		return 0;
-
+	}
 	for (pagen = 0, alloc_len = 0; pagen < pcount; pagen++) {
 		/* The DMA memory is always allocated in the length of a
 		 * page even though the last SGE might not fill up to a

drivers/scsi/lpfc/lpfc_sli.c

@@ -516,6 +516,8 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba)
 	struct lpfc_sglq *sglq = NULL;
 	uint16_t adj_xri;
 	list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
+	if (!sglq)
+		return NULL;
 	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
 	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
 	return sglq;
@@ -2070,8 +2072,8 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	if ((irsp->ulpCommand == CMD_RCV_ELS_REQ64_CX) ||
 	    (irsp->ulpCommand == CMD_RCV_ELS_REQ_CX) ||
 	    (irsp->ulpCommand == CMD_IOCB_RCV_ELS64_CX)) {
-		Rctl = FC_ELS_REQ;
-		Type = FC_ELS_DATA;
+		Rctl = FC_RCTL_ELS_REQ;
+		Type = FC_TYPE_ELS;
 	} else {
 		w5p = (WORD5 *)&(saveq->iocb.un.ulpWord[5]);
 		Rctl = w5p->hcsw.Rctl;
@@ -2081,8 +2083,8 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		if ((Rctl == 0) && (pring->ringno == LPFC_ELS_RING) &&
 			(irsp->ulpCommand == CMD_RCV_SEQUENCE64_CX ||
 			 irsp->ulpCommand == CMD_IOCB_RCV_SEQ64_CX)) {
-			Rctl = FC_ELS_REQ;
-			Type = FC_ELS_DATA;
+			Rctl = FC_RCTL_ELS_REQ;
+			Type = FC_TYPE_ELS;
 			w5p->hcsw.Rctl = Rctl;
 			w5p->hcsw.Type = Type;
 		}
@@ -4485,7 +4487,8 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	rc = lpfc_sli4_post_sgl_list(phba);
 	if (unlikely(rc)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
-				"0582 Error %d during sgl post operation", rc);
+				"0582 Error %d during sgl post operation\n",
+					rc);
 		rc = -ENODEV;
 		goto out_free_vpd;
 	}
@@ -4494,8 +4497,8 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	rc = lpfc_sli4_repost_scsi_sgl_list(phba);
 	if (unlikely(rc)) {
 		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI,
-				"0383 Error %d during scsi sgl post opeation",
-				rc);
+				"0383 Error %d during scsi sgl post "
+				"operation\n", rc);
 		/* Some Scsi buffers were moved to the abort scsi list */
 		/* A pci function reset will repost them */
 		rc = -ENODEV;
@@ -5686,7 +5689,7 @@ __lpfc_sli_issue_iocb_s3(struct lpfc_hba *phba, uint32_t ring_number,
 		case CMD_GEN_REQUEST64_CX:
 			if (!(phba->sli.sli_flag & LPFC_MENLO_MAINT) ||
 				(piocb->iocb.un.genreq64.w5.hcsw.Rctl !=
-					FC_FCP_CMND) ||
+					FC_RCTL_DD_UNSOL_CMD) ||
 				(piocb->iocb.un.genreq64.w5.hcsw.Type !=
 					MENLO_TRANSPORT_TYPE))
 
@@ -6485,27 +6488,27 @@ lpfc_sli_setup(struct lpfc_hba *phba)
 				lpfc_sli_async_event_handler;
 			pring->num_mask = LPFC_MAX_RING_MASK;
 			pring->prt[0].profile = 0;	/* Mask 0 */
-			pring->prt[0].rctl = FC_ELS_REQ;
-			pring->prt[0].type = FC_ELS_DATA;
+			pring->prt[0].rctl = FC_RCTL_ELS_REQ;
+			pring->prt[0].type = FC_TYPE_ELS;
 			pring->prt[0].lpfc_sli_rcv_unsol_event =
 			    lpfc_els_unsol_event;
 			pring->prt[1].profile = 0;	/* Mask 1 */
-			pring->prt[1].rctl = FC_ELS_RSP;
-			pring->prt[1].type = FC_ELS_DATA;
+			pring->prt[1].rctl = FC_RCTL_ELS_REP;
+			pring->prt[1].type = FC_TYPE_ELS;
 			pring->prt[1].lpfc_sli_rcv_unsol_event =
 			    lpfc_els_unsol_event;
 			pring->prt[2].profile = 0;	/* Mask 2 */
 			/* NameServer Inquiry */
-			pring->prt[2].rctl = FC_UNSOL_CTL;
+			pring->prt[2].rctl = FC_RCTL_DD_UNSOL_CTL;
 			/* NameServer */
-			pring->prt[2].type = FC_COMMON_TRANSPORT_ULP;
+			pring->prt[2].type = FC_TYPE_CT;
 			pring->prt[2].lpfc_sli_rcv_unsol_event =
 			    lpfc_ct_unsol_event;
 			pring->prt[3].profile = 0;	/* Mask 3 */
 			/* NameServer response */
-			pring->prt[3].rctl = FC_SOL_CTL;
+			pring->prt[3].rctl = FC_RCTL_DD_SOL_CTL;
 			/* NameServer */
-			pring->prt[3].type = FC_COMMON_TRANSPORT_ULP;
+			pring->prt[3].type = FC_TYPE_CT;
 			pring->prt[3].lpfc_sli_rcv_unsol_event =
 			    lpfc_ct_unsol_event;
 			/* abort unsolicited sequence */
@@ -8089,7 +8092,7 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 							KERN_ERR,
 							LOG_MBOX | LOG_SLI,
 							"0350 rc should have"
-							"been MBX_BUSY");
+							"been MBX_BUSY\n");
 						if (rc != MBX_NOT_FINISHED)
 							goto send_current_mbox;
 					}
@@ -8118,7 +8121,7 @@ lpfc_sli_sp_intr_handler(int irq, void *dev_id)
 			if (rc != MBX_SUCCESS)
 				lpfc_printf_log(phba, KERN_ERR, LOG_MBOX |
 						LOG_SLI, "0349 rc should be "
-						"MBX_SUCCESS");
+						"MBX_SUCCESS\n");
 		}
 
 		spin_lock_irqsave(&phba->hbalock, iflag);
@@ -10454,8 +10457,7 @@ lpfc_sli4_next_xritag(struct lpfc_hba *phba)
 		return xritag;
 	}
 	spin_unlock_irq(&phba->hbalock);
-
-	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+	lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
 			"2004 Failed to allocate XRI.last XRITAG is %d"
 			" Max XRI is %d, Used XRI is %d\n",
 			phba->sli4_hba.next_xri,
@@ -10519,15 +10521,7 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
 		lpfc_sli4_mbox_cmd_free(phba, mbox);
 		return -ENOMEM;
 	}
-
 	/* Get the first SGE entry from the non-embedded DMA memory */
-	if (unlikely(!mbox->sge_array)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
-				"2525 Failed to get the non-embedded SGE "
-				"virtual address\n");
-		lpfc_sli4_mbox_cmd_free(phba, mbox);
-		return -ENOMEM;
-	}
 	viraddr = mbox->sge_array->addr[0];
 
 	/* Set up the SGL pages in the non-embedded DMA pages */
@@ -10551,8 +10545,7 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba)
 		sgl_pg_pairs++;
 	}
 	bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start);
-	pg_pairs = (pg_pairs > 0) ? (pg_pairs - 1) : pg_pairs;
-	bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs);
+	bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt);
 	/* Perform endian conversion if necessary */
 	sgl->word0 = cpu_to_le32(sgl->word0);
 
@@ -10634,15 +10627,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
 		lpfc_sli4_mbox_cmd_free(phba, mbox);
 		return -ENOMEM;
 	}
-
 	/* Get the first SGE entry from the non-embedded DMA memory */
-	if (unlikely(!mbox->sge_array)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
-				"2565 Failed to get the non-embedded SGE "
-				"virtual address\n");
-		lpfc_sli4_mbox_cmd_free(phba, mbox);
-		return -ENOMEM;
-	}
 	viraddr = mbox->sge_array->addr[0];
 
 	/* Set up the SGL pages in the non-embedded DMA pages */
@@ -11565,6 +11550,7 @@ lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
 {
 	LPFC_MBOXQ_t *mboxq;
 	int rc = 0;
+	int retval = MBX_SUCCESS;
 	uint32_t mbox_tmo;
 
 	if (vpi == 0)
@@ -11575,16 +11561,17 @@ lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
 	lpfc_init_vpi(phba, mboxq, vpi);
 	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
 	rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
-	if (rc != MBX_TIMEOUT)
-		mempool_free(mboxq, phba->mbox_mem_pool);
 	if (rc != MBX_SUCCESS) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 				"2022 INIT VPI Mailbox failed "
 				"status %d, mbxStatus x%x\n", rc,
 				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
-		rc = -EIO;
+		retval = -EIO;
 	}
-	return rc;
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mboxq, phba->mbox_mem_pool);
+
+	return retval;
 }
 
 /**
@@ -11669,13 +11656,6 @@ lpfc_sli4_add_fcf_record(struct lpfc_hba *phba, struct fcf_record *fcf_record)
 	 */
 	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
 	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
-	if (unlikely(!mboxq->sge_array)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
-				"2526 Failed to get the non-embedded SGE "
-				"virtual address\n");
-		lpfc_sli4_mbox_cmd_free(phba, mboxq);
-		return -ENOMEM;
-	}
 	virt_addr = mboxq->sge_array->addr[0];
 	/*
 	 * Configure the FCF record for FCFI 0.  This is the driver's
@@ -11799,13 +11779,6 @@ lpfc_sli4_read_fcf_record(struct lpfc_hba *phba, uint16_t fcf_index)
 	 */
 	lpfc_sli4_mbx_sge_get(mboxq, 0, &sge);
 	phys_addr = getPaddr(sge.pa_hi, sge.pa_lo);
-	if (unlikely(!mboxq->sge_array)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
-				"2527 Failed to get the non-embedded SGE "
-				"virtual address\n");
-		error = -ENOMEM;
-		goto fail_fcfscan;
-	}
 	virt_addr = mboxq->sge_array->addr[0];
 	read_fcf = (struct lpfc_mbx_read_fcf_tbl *)virt_addr;
 

drivers/scsi/lpfc/lpfc_sli4.h

@@ -159,7 +159,7 @@ struct lpfc_fip_param_hdr {
 #define	lpfc_fip_param_hdr_fipp_mode_SHIFT	6
 #define	lpfc_fip_param_hdr_fipp_mode_MASK	0x3
 #define lpfc_fip_param_hdr_fipp_mode_WORD	parm_flags
-#define	FIPP_MODE_ON				0x2
+#define	FIPP_MODE_ON				0x1
 #define	FIPP_MODE_OFF				0x0
 #define FIPP_VLAN_VALID				0x1
 };