Merge kroah.com:/home/linux/linux/BK/bleeding-2.5

into kroah.com:/home/linux/linux/BK/gregkh-2.5

drivers/usb/core/hcd.c

@@ -389,8 +389,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
 		break;
 	case DeviceOutRequest | USB_REQ_SET_ADDRESS:
 		// wValue == urb->dev->devaddr
-		dbg ("%s root hub device address %d",
-			hcd->self.bus_name, wValue);
+		dev_dbg (*hcd->controller, "root hub device address %d\n",
+			wValue);
 		break;
 
 	/* INTERFACE REQUESTS (no defined feature/status flags) */
@@ -1188,7 +1188,6 @@ static int hcd_unlink_urb (struct urb *urb)
 	if (urb->transfer_flags & URB_ASYNC_UNLINK)
 		return -EINPROGRESS;
 
-	dev_dbg (*sys, "wait for giveback urb %p\n", urb);
 	wait_for_completion (&splice.done);
 	return 0;
 

drivers/usb/core/hub.c

@@ -57,6 +57,12 @@ static inline char *portspeed (int portstatus)
 }
 #endif
 
+/* for dev_info, dev_dbg, etc */
+static inline struct device *hubdev (struct usb_device *dev)
+{
+	return &dev->actconfig->interface [0].dev;
+}
+
 /* USB 2.0 spec Section 11.24.4.5 */
 static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
 {
@@ -298,7 +304,7 @@ static int usb_hub_configure(struct usb_hub *hub,
 	}
 
 	dev->maxchild = hub->descriptor->bNbrPorts;
-	info("%d port%s detected", dev->maxchild,
+	dev_info (*hubdev (dev), "%d port%s detected\n", dev->maxchild,
 		(dev->maxchild == 1) ? "" : "s");
 
 	le16_to_cpus(&hub->descriptor->wHubCharacteristics);
@@ -521,7 +527,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	}
 
 	/* We found a hub */
-	info("USB hub found at %s", dev->devpath);
+	dev_info (*hubdev (dev), "USB hub found\n");
 
 	hub = kmalloc(sizeof(*hub), GFP_KERNEL);
 	if (!hub) {
@@ -651,8 +657,6 @@ static int usb_hub_port_status(struct usb_device *hub, int port,
 		else {
 			*status = le16_to_cpu(portsts->wPortStatus);
 			*change = le16_to_cpu(portsts->wPortChange); 
-			dbg("port %d, portstatus %x, change %x, %s", port + 1,
-				*status, *change, portspeed(*status));
 			ret = 0;
 		}
 		kfree(portsts);
@@ -710,8 +714,9 @@ static int usb_hub_port_wait_reset(struct usb_device *hub, int port,
 		if (delay_time >= 2 * HUB_SHORT_RESET_TIME)
 			delay = HUB_LONG_RESET_TIME;
 
-		dbg("port %d of hub %s not reset yet, waiting %dms", port + 1,
-			hub->devpath, delay);
+		dev_dbg (*hubdev (hub),
+			"port %d not reset yet, waiting %dms\n",
+			port + 1, delay);
 	}
 
 	return -1;
@@ -735,14 +740,15 @@ static int usb_hub_port_reset(struct usb_device *hub, int port,
 			return status;
 		}
 
-		dbg("port %d of hub %s not enabled, trying reset again...",
-			port + 1, hub->devpath);
+		dev_dbg (*hubdev (hub),
+			"port %d not enabled, trying reset again...\n",
+			port + 1);
 		delay = HUB_LONG_RESET_TIME;
 	}
 
-	err("Cannot enable port %i of hub %s, disabling port.",
-		port + 1, hub->devpath);
-	err("Maybe the USB cable is bad?");
+	dev_err (*hubdev (hub),
+		"Cannot enable port %i.  Maybe the USB cable is bad?\n",
+		port + 1);
 
 	return -1;
 }
@@ -808,8 +814,9 @@ static int usb_hub_port_debounce(struct usb_device *hub, int port)
 	}
 
 	/* XXX Replace this with dbg() when 2.6 is about to ship. */
-	info("debounce: hub %d port %d: delay %dms stable %d status 0x%x\n",
-	    hub->devnum, port, delay_time, stable_count, portstatus);
+	dev_info (*hubdev (hub),
+		"debounce: port %d: delay %dms stable %d status 0x%x\n",
+		port + 1, delay_time, stable_count, portstatus);
 
 	return ((portstatus&USB_PORT_STAT_CONNECTION)) ? 0 : 1;
 }
@@ -822,9 +829,9 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 	unsigned int delay = HUB_SHORT_RESET_TIME;
 	int i;
 
-	dbg("hub %s port %d, portstatus %x, change %x, %s",
-		hub->devpath, port + 1,
-		portstatus, portchange, portspeed (portstatus));
+	dev_dbg (hubstate->intf->dev,
+		"port %d, status %x, change %x, %s\n",
+		port + 1, portstatus, portchange, portspeed (portstatus));
 
 	/* Clear the connection change status */
 	usb_clear_port_feature(hub, port + 1, USB_PORT_FEAT_C_CONNECTION);
@@ -842,7 +849,9 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 	}
 
 	if (usb_hub_port_debounce(hub, port)) {
-		err("connect-debounce failed, port %d disabled", port+1);
+		dev_err (hubstate->intf->dev,
+			"connect-debounce failed, port %d disabled\n",
+			port+1);
 		usb_hub_port_disable(hub, port);
 		return;
 	}
@@ -861,7 +870,8 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 		/* Allocate a new device struct */
 		dev = usb_alloc_dev(hub, hub->bus);
 		if (!dev) {
-			err("couldn't allocate usb_device");
+			dev_err (hubstate->intf->dev,
+				"couldn't allocate usb_device\n");
 			break;
 		}
 
@@ -904,10 +914,12 @@ static void usb_hub_port_connect_change(struct usb_hub *hubstate, int port,
 			len = snprintf (dev->devpath, sizeof dev->devpath,
 				"%d", port + 1);
 		if (len == sizeof dev->devpath)
-			warn ("devpath size! usb/%03d/%03d path %s",
+			dev_err (hubstate->intf->dev,
+				"devpath size! usb/%03d/%03d path %s\n",
 				dev->bus->busnum, dev->devnum, dev->devpath);
-		info("new USB device %s-%s, assigned address %d",
-			dev->bus->bus_name, dev->devpath, dev->devnum);
+		dev_info (hubstate->intf->dev,
+			"new USB device on port %d, assigned address %d\n",
+			port + 1, dev->devnum);
 
 		/* put the device in the global device tree. the hub port
 		 * is the "bus_id"; hubs show in hierarchy like bridges
@@ -992,12 +1004,11 @@ static void usb_hub_events(void)
 			}
 
 			if (portchange & USB_PORT_STAT_C_CONNECTION) {
-				dbg("hub %s port %d connection change",
-					dev->devpath, i + 1);
 				usb_hub_port_connect_change(hub, i, portstatus, portchange);
 			} else if (portchange & USB_PORT_STAT_C_ENABLE) {
-				dbg("hub %s port %d enable change, status %x",
-					dev->devpath, i + 1, portstatus);
+				dev_dbg (*hubdev (dev),
+					"port %d enable change, status %x\n",
+					i + 1, portstatus);
 				usb_clear_port_feature(dev,
 					i + 1, USB_PORT_FEAT_C_ENABLE);
 

drivers/usb/host/ehci-dbg.c

@@ -18,21 +18,45 @@
 
 /* this file is part of ehci-hcd.c */
 
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,50)
+
 #define ehci_dbg(ehci, fmt, args...) \
 	dev_dbg (*(ehci)->hcd.controller, fmt, ## args )
+#define ehci_err(ehci, fmt, args...) \
+	dev_err (*(ehci)->hcd.controller, fmt, ## args )
+#define ehci_info(ehci, fmt, args...) \
+	dev_info (*(ehci)->hcd.controller, fmt, ## args )
+#define ehci_warn(ehci, fmt, args...) \
+	dev_warn (*(ehci)->hcd.controller, fmt, ## args )
 
-#ifdef EHCI_VERBOSE_DEBUG
-#define ehci_vdbg(ehci, fmt, args...) \
-	dev_dbg (*(ehci)->hcd.controller, fmt, ## args )
 #else
-#define ehci_vdbg(ehci, fmt, args...) do { } while (0)
+
+#ifdef DEBUG
+#define ehci_dbg(ehci, fmt, args...) \
+	printk(KERN_DEBUG "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
+#else
+#define ehci_dbg(ehci, fmt, args...) do { } while (0)
+#endif
+
+#define ehci_err(ehci, fmt, args...) \
+	printk(KERN_ERR "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
+#define ehci_info(ehci, fmt, args...) \
+	printk(KERN_INFO "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
+#define ehci_warn(ehci, fmt, args...) \
+	printk(KERN_WARNING "%s %s: " fmt, hcd_name, \
+		(ehci)->hcd.pdev->slot_name, ## args )
 #endif
 
 
 #ifdef EHCI_VERBOSE_DEBUG
 #	define vdbg dbg
+#	define ehci_vdbg ehci_dbg
 #else
-	static inline void vdbg (char *fmt, ...) { }
+#	define vdbg(fmt,args...) do { } while (0)
+#	define ehci_vdbg(ehci, fmt, args...) do { } while (0)
 #endif
 
 #ifdef	DEBUG
@@ -289,7 +313,8 @@ static void qh_lines (struct ehci_qh *qh, char **nextp, unsigned *sizep)
 
 	scratch = cpu_to_le32p (&qh->hw_info1);
 	hw_curr = cpu_to_le32p (&qh->hw_current);
-	temp = snprintf (next, size, "qh/%p dev%d %cs ep%d %08x %08x (%08x %08x)",
+	temp = snprintf (next, size,
+			"qh/%p dev%d %cs ep%d %08x %08x (%08x %08x)",
 			qh, scratch & 0x007f,
 			speed_char (scratch),
 			(scratch >> 8) & 0x000f,

drivers/usb/host/ehci-hcd.c

@@ -123,12 +123,6 @@ static int log2_irq_thresh = 0;		// 0 to 6
 MODULE_PARM (log2_irq_thresh, "i");
 MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
 
-/* allow irqs at least every N URB completions */
-static int max_completions = 16;
-MODULE_PARM (max_completions, "i");
-MODULE_PARM_DESC (max_completions,
-		"limit for urb completions called with irqs disenabled");
-
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
@@ -202,7 +196,7 @@ static int ehci_reset (struct ehci_hcd *ehci)
 	dbg_cmd (ehci, "reset", command);
 	writel (command, &ehci->regs->command);
 	ehci->hcd.state = USB_STATE_HALT;
-	return handshake (&ehci->regs->command, CMD_RESET, 0, 250);
+	return handshake (&ehci->regs->command, CMD_RESET, 0, 250 * 1000);
 }
 
 /* idle the controller (from running) */
@@ -250,9 +244,7 @@ static void ehci_ready (struct ehci_hcd *ehci)
 
 /*-------------------------------------------------------------------------*/
 
-static void ehci_tasklet (unsigned long param);
-
-static void ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs);
+static void ehci_work(struct ehci_hcd *ehci, struct pt_regs *regs);
 
 static void ehci_watchdog (unsigned long param)
 {
@@ -260,10 +252,25 @@ static void ehci_watchdog (unsigned long param)
 	unsigned long		flags;
 
 	spin_lock_irqsave (&ehci->lock, flags);
-	/* guard against lost IAA, which wedges everything */
-	ehci_irq (&ehci->hcd, NULL);
+
+	/* lost IAA irqs wedge things badly; seen with a vt8235 */
+	if (ehci->reclaim) {
+		u32		status = readl (&ehci->regs->status);
+
+		if (status & STS_IAA) {
+			ehci_vdbg (ehci, "lost IAA\n");
+			writel (STS_IAA, &ehci->regs->status);
+			ehci->reclaim_ready = 1;
+		}
+	}
+
+	ehci_work (ehci, NULL);
+	if (ehci->reclaim && !timer_pending (&ehci->watchdog))
+		mod_timer (&ehci->watchdog,
+				jiffies + EHCI_WATCHDOG_JIFFIES);
+
  	/* stop async processing after it's idled a while */
- 	if (ehci->async_idle) {
+	else if (ehci->async_idle) {
  		start_unlink_async (ehci, ehci->async);
  		ehci->async_idle = 0;
 	}
@@ -289,8 +296,7 @@ static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
 			pci_read_config_dword (ehci->hcd.pdev, where, &cap);
 		} while ((cap & (1 << 16)) && msec);
 		if (cap & (1 << 16)) {
-			dev_info (*ehci->hcd.controller,
-				"BIOS handoff failed (%d, %04x)\n",
+			ehci_err (ehci, "BIOS handoff failed (%d, %04x)\n",
 				where, cap);
 			return 1;
 		} 
@@ -333,8 +339,7 @@ static int ehci_start (struct usb_hcd *hcd)
 				return -EOPNOTSUPP;
 			break;
 		case 0:			/* illegal reserved capability */
-			dev_warn (*ehci->hcd.controller,
-					"illegal capability!\n");
+			ehci_warn (ehci, "illegal capability!\n");
 			cap = 0;
 			/* FALLTHROUGH */
 		default:		/* unknown */
@@ -381,6 +386,8 @@ static int ehci_start (struct usb_hcd *hcd)
 	 * dedicate a qh for the async ring head, since we couldn't unlink
 	 * a 'real' qh without stopping the async schedule [4.8].  use it
 	 * as the 'reclamation list head' too.
+	 * its dummy is used in hw_alt_next of many tds, to prevent the qh
+	 * from automatically advancing to the next td after short reads.
 	 */
 	ehci->async->qh_next.qh = 0;
 	ehci->async->hw_next = QH_NEXT (ehci->async->qh_dma);
@@ -388,8 +395,7 @@ static int ehci_start (struct usb_hcd *hcd)
 	ehci->async->hw_token = cpu_to_le32 (QTD_STS_HALT);
 	ehci->async->hw_qtd_next = EHCI_LIST_END;
 	ehci->async->qh_state = QH_STATE_LINKED;
-	ehci_qtd_free (ehci, ehci->async->dummy);
-	ehci->async->dummy = 0;
+	ehci->async->hw_alt_next = QTD_NEXT (ehci->async->dummy->qtd_dma);
 	writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
 
 	/*
@@ -406,8 +412,7 @@ static int ehci_start (struct usb_hcd *hcd)
 	if (HCC_64BIT_ADDR (hcc_params)) {
 		writel (0, &ehci->regs->segment);
 		if (!pci_set_dma_mask (ehci->hcd.pdev, 0xffffffffffffffffULL))
-			dev_info (*ehci->hcd.controller,
-				"enabled 64bit PCI DMA (DAC)\n");
+			ehci_info (ehci, "enabled 64bit PCI DMA\n");
 	}
 
 	/* clear interrupt enables, set irq latency */
@@ -426,9 +431,6 @@ static int ehci_start (struct usb_hcd *hcd)
 
 	/* set async sleep time = 10 us ... ? */
 
-	ehci->tasklet.func = ehci_tasklet;
-	ehci->tasklet.data = (unsigned long) ehci;
-
 	init_timer (&ehci->watchdog);
 	ehci->watchdog.function = ehci_watchdog;
 	ehci->watchdog.data = (unsigned long) ehci;
@@ -454,7 +456,7 @@ static int ehci_start (struct usb_hcd *hcd)
         /* PCI Serial Bus Release Number is at 0x60 offset */
 	pci_read_config_byte (hcd->pdev, 0x60, &tempbyte);
 	temp = readw (&ehci->caps->hci_version);
-	dev_info (*hcd->controller,
+	ehci_info (ehci,
 		"USB %x.%x enabled, EHCI %x.%02x, driver %s\n",
 		((tempbyte & 0xf0)>>4), (tempbyte & 0x0f),
 		temp >> 8, temp & 0xff, DRIVER_VERSION);
@@ -494,10 +496,11 @@ static void ehci_stop (struct usb_hcd *hcd)
 	/* no more interrupts ... */
 	if (hcd->state == USB_STATE_RUNNING)
 		ehci_ready (ehci);
-	if (in_interrupt ())		/* should not happen!! */
-		dev_err (*hcd->controller, "stopped %s!\n", RUN_CONTEXT);
-	else
-		del_timer_sync (&ehci->watchdog);
+	if (in_interrupt ()) {		/* must not happen!! */
+		ehci_err (ehci, "stopped in_interrupt!\n");
+		return;
+	}
+	del_timer_sync (&ehci->watchdog);
 	ehci_reset (ehci);
 
 	/* let companion controllers work when we aren't */
@@ -506,8 +509,9 @@ static void ehci_stop (struct usb_hcd *hcd)
 	remove_debug_files (ehci);
 
 	/* root hub is shut down separately (first, when possible) */
-	tasklet_disable (&ehci->tasklet);
-	ehci_tasklet ((unsigned long) ehci);
+	spin_lock_irq (&ehci->lock);
+	ehci_work (ehci, NULL);
+	spin_unlock_irq (&ehci->lock);
 	ehci_mem_cleanup (ehci);
 
 #ifdef	EHCI_STATS
@@ -615,22 +619,16 @@ dbg ("%s: resume port %d", hcd_to_bus (hcd)->bus_name, i);
 /*-------------------------------------------------------------------------*/
 
 /*
- * tasklet scheduled by some interrupts and other events
- * calls driver completion functions ... but not in_irq()
+ * ehci_work is called from some interrupts, timers, and so on.
+ * it calls driver completion functions, after dropping ehci->lock.
  */
-static void ehci_tasklet (unsigned long param)
+static void ehci_work (struct ehci_hcd *ehci, struct pt_regs *regs)
 {
-	struct ehci_hcd		*ehci = (struct ehci_hcd *) param;
-
-	spin_lock_irq (&ehci->lock);
-
 	if (ehci->reclaim_ready)
-		end_unlink_async (ehci);
-	scan_async (ehci);
+		end_unlink_async (ehci, regs);
+	scan_async (ehci, regs);
 	if (ehci->next_uframe != -1)
-		scan_periodic (ehci);
-
-	spin_unlock_irq (&ehci->lock);
+		scan_periodic (ehci, regs);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -643,7 +641,7 @@ static void ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
 
 	/* e.g. cardbus physical eject */
 	if (status == ~(u32) 0) {
-		dbg ("%s: device removed!", hcd_to_bus (hcd)->bus_name);
+		ehci_dbg (ehci, "device removed\n");
 		goto dead;
 	}
 
@@ -651,6 +649,8 @@ static void ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
 	if (!status)			/* irq sharing? */
 		return;
 
+	spin_lock (&ehci->lock);
+
 	/* clear (just) interrupts */
 	writel (status, &ehci->regs->status);
 	readl (&ehci->regs->command);	/* unblock posted write */
@@ -681,8 +681,7 @@ static void ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
 
 	/* PCI errors [4.15.2.4] */
 	if (unlikely ((status & STS_FATAL) != 0)) {
-		err ("%s: fatal error, state %x",
-			hcd_to_bus (hcd)->bus_name, hcd->state);
+		ehci_err (ehci, "fatal error\n");
 dead:
 		ehci_reset (ehci);
 		/* generic layer kills/unlinks all urbs, then
@@ -691,9 +690,9 @@ static void ehci_irq (struct usb_hcd *hcd, struct pt_regs *regs)
 		bh = 1;
 	}
 
-	/* most work doesn't need to be in_irq() */
-	if (likely (bh == 1))
-		tasklet_schedule (&ehci->tasklet);
+	if (bh)
+		ehci_work (ehci, regs);
+	spin_unlock (&ehci->lock);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -754,52 +753,52 @@ static int ehci_urb_enqueue (
 static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci (hcd);
-	struct ehci_qh		*qh = (struct ehci_qh *) urb->hcpriv;
+	struct ehci_qh		*qh;
 	unsigned long		flags;
+	int			maybe_irq = 1;
 
-	ehci_vdbg (ehci, "urb_dequeue %p qh %p state %d\n",
-		urb, qh, qh->qh_state);
-
+	spin_lock_irqsave (&ehci->lock, flags);
 	switch (usb_pipetype (urb->pipe)) {
 	// case PIPE_CONTROL:
 	// case PIPE_BULK:
 	default:
-		spin_lock_irqsave (&ehci->lock, flags);
-		if (ehci->reclaim) {
-			vdbg ("dq %p: reclaim = %p, %s",
-				qh, ehci->reclaim, RUN_CONTEXT);
-			if (qh == ehci->reclaim) {
-				/* unlinking qh for another queued urb? */
-				spin_unlock_irqrestore (&ehci->lock, flags);
-				return 0;
-			}
-			if (in_interrupt ()) {
-				spin_unlock_irqrestore (&ehci->lock, flags);
-				return -EAGAIN;
-			}
-			while (qh->qh_state == QH_STATE_LINKED
-					&& ehci->reclaim
-					&& ehci->hcd.state != USB_STATE_HALT
-					) {
-				spin_unlock_irqrestore (&ehci->lock, flags);
-				/* let pending unlinks complete */
-				wait_ms (1);
-				spin_lock_irqsave (&ehci->lock, flags);
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
+		while (qh->qh_state == QH_STATE_LINKED
+				&& ehci->reclaim
+				&& HCD_IS_RUNNING (ehci->hcd.state)
+				) {
+			spin_unlock_irqrestore (&ehci->lock, flags);
+
+			if (maybe_irq) {
+				if (in_interrupt ())
+					return -EAGAIN;
+				maybe_irq = 0;
 			}
+			/* let pending unlinks complete, so this can start */
+			wait_ms (1);
+
+			spin_lock_irqsave (&ehci->lock, flags);
 		}
+		if (!HCD_IS_RUNNING (ehci->hcd.state) && ehci->reclaim)
+			end_unlink_async (ehci, NULL);
+
+		/* something else might have unlinked the qh by now */
 		if (qh->qh_state == QH_STATE_LINKED)
 			start_unlink_async (ehci, qh);
-		spin_unlock_irqrestore (&ehci->lock, flags);
 		break;
 
 	case PIPE_INTERRUPT:
-		spin_lock_irqsave (&ehci->lock, flags);
+		qh = (struct ehci_qh *) urb->hcpriv;
+		if (!qh)
+			break;
 		if (qh->qh_state == QH_STATE_LINKED) {
 			/* messy, can spin or block a microframe ... */
 			intr_deschedule (ehci, qh, 1);
 			/* qh_state == IDLE */
 		}
-		qh_completions (ehci, qh);
+		qh_completions (ehci, qh, NULL);
 
 		/* reschedule QH iff another request is queued */
 		if (!list_empty (&qh->qtd_list)
@@ -817,7 +816,6 @@ static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 			}
 			return status;
 		}
-		spin_unlock_irqrestore (&ehci->lock, flags);
 		break;
 
 	case PIPE_ISOCHRONOUS:
@@ -828,6 +826,7 @@ static int ehci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 		urb->transfer_flags |= EHCI_STATE_UNLINK;
 		break;
 	}
+	spin_unlock_irqrestore (&ehci->lock, flags);
 	return 0;
 }
 
@@ -885,11 +884,11 @@ static void ehci_free_config (struct usb_hcd *hcd, struct usb_device *udev)
 			 */
 			while (qh->qh_state == QH_STATE_LINKED
 					&& ehci->reclaim
-					&& ehci->hcd.state != USB_STATE_HALT
+					&& HCD_IS_RUNNING (ehci->hcd.state)
 					) {
 				spin_unlock_irqrestore (&ehci->lock, flags);
 				/* wait_ms() won't spin, we're a thread;
-				 * and we know IRQ+tasklet can progress
+				 * and we know IRQ/timer/... can progress
 				 */
 				wait_ms (1);
 				spin_lock_irqsave (&ehci->lock, flags);

drivers/usb/host/ehci-hub.c

@@ -315,7 +315,7 @@ static int ehci_hub_control (
 					wIndex + 1);
 				temp |= PORT_OWNER;
 			} else {
-				ehci_vdbg (ehci, "port %d reset", wIndex + 1);
+				ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
 				temp |= PORT_RESET;
 				temp &= ~PORT_PE;
 

drivers/usb/host/ehci-mem.c

@@ -73,8 +73,11 @@ static struct ehci_qtd *ehci_qtd_alloc (struct ehci_hcd *ehci, int flags)
 	dma_addr_t		dma;
 
 	qtd = pci_pool_alloc (ehci->qtd_pool, flags, &dma);
-	if (qtd != 0)
+	if (qtd != 0) {
 		ehci_qtd_init (qtd, dma);
+		if (ehci->async)
+			qtd->hw_alt_next = ehci->async->hw_alt_next;
+	}
 	return qtd;
 }
 

drivers/usb/host/ehci-q.c

@@ -73,11 +73,6 @@ qtd_fill (struct ehci_qtd *qtd, dma_addr_t buf, size_t len, int token)
 	qtd->hw_token = cpu_to_le32 ((count << 16) | token);
 	qtd->length = count;
 
-#if 0
-	vdbg ("  qtd_fill %p, token %8x bytes %d dma %x",
-		qtd, le32_to_cpu (qtd->hw_token), count, qtd->hw_buf [0]);
-#endif
-
 	return count;
 }
 
@@ -85,11 +80,12 @@ qtd_fill (struct ehci_qtd *qtd, dma_addr_t buf, size_t len, int token)
 
 /* update halted (but potentially linked) qh */
 
-static void qh_update (struct ehci_qh *qh, struct ehci_qtd *qtd)
+static void
+qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
 {
 	qh->hw_current = 0;
 	qh->hw_qtd_next = QTD_NEXT (qtd->qtd_dma);
-	qh->hw_alt_next = EHCI_LIST_END;
+	qh->hw_alt_next = ehci->async->hw_alt_next;
 
 	/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
 	wmb ();
@@ -98,7 +94,12 @@ static void qh_update (struct ehci_qh *qh, struct ehci_qtd *qtd)
 
 /*-------------------------------------------------------------------------*/
 
-static inline void qtd_copy_status (struct urb *urb, size_t length, u32 token)
+static inline void qtd_copy_status (
+	struct ehci_hcd *ehci,
+	struct urb *urb,
+	size_t length,
+	u32 token
+)
 {
 	/* count IN/OUT bytes, not SETUP (even short packets) */
 	if (likely (QTD_PID (token) != 2))
@@ -132,7 +133,7 @@ static inline void qtd_copy_status (struct urb *urb, size_t length, u32 token)
 
 		ehci_vdbg (ehci,
 			"dev%d ep%d%s qtd token %08x --> status %d\n",
-			usb_pipedev (urb->pipe),
+			usb_pipedevice (urb->pipe),
 			usb_pipeendpoint (urb->pipe),
 			usb_pipein (urb->pipe) ? "in" : "out",
 			token, urb->status);
@@ -157,9 +158,17 @@ static inline void qtd_copy_status (struct urb *urb, size_t length, u32 token)
 			}
 		}
 	}
+
+	/* force cleanup after short read; not necessarily an error */
+	if (unlikely (urb->status == -EINPROGRESS
+			&& QTD_LENGTH (token) != 0
+			&& QTD_PID (token) == 1)) {
+		urb->status = -EREMOTEIO;
+	}
 }
 
-static void ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb)
+static void
+ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb, struct pt_regs *regs)
 {
 	if (likely (urb->hcpriv != 0)) {
 		struct ehci_qh	*qh = (struct ehci_qh *) urb->hcpriv;
@@ -174,24 +183,26 @@ static void ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb)
 		urb->hcpriv = 0;
 	}
 
-	if (likely (urb->status == -EINPROGRESS)) {
-		if (urb->actual_length != urb->transfer_buffer_length
-				&& (urb->transfer_flags & URB_SHORT_NOT_OK))
-			urb->status = -EREMOTEIO;
-		else
+	switch (urb->status) {
+	case -EINPROGRESS:		/* success */
+		urb->status = 0;
+	default:			/* fault */
+		COUNT (ehci->stats.complete);
+		break;
+	case -EREMOTEIO:		/* fault or normal */
+		if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
 			urb->status = 0;
-	}
-
-	if (likely (urb->status == 0))
 		COUNT (ehci->stats.complete);
-	else if (urb->status == -ECONNRESET || urb->status == -ENOENT)
+		break;
+	case -ECONNRESET:		/* canceled */
+	case -ENOENT:
 		COUNT (ehci->stats.unlink);
-	else
-		COUNT (ehci->stats.error);
+		break;
+	}
 
 	/* complete() can reenter this HCD */
 	spin_unlock (&ehci->lock);
-	usb_hcd_giveback_urb (&ehci->hcd, urb, NULL);
+	usb_hcd_giveback_urb (&ehci->hcd, urb, regs);
 
 	spin_lock (&ehci->lock);
 }
@@ -203,14 +214,14 @@ static void ehci_urb_done (struct ehci_hcd *ehci, struct urb *urb)
  * indicating how much "real" work we did.
  */
 static unsigned
-qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
+qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh, struct pt_regs *regs)
 {
 	struct ehci_qtd		*qtd, *last;
 	struct list_head	*next, *qtd_list = &qh->qtd_list;
-	int			unlink = 0, halted = 0;
+	int			unlink = 0, stopped = 0;
 	unsigned		count = 0;
 
-	if (unlikely (list_empty (qtd_list)))
+	if (unlikely (list_empty (&qh->qtd_list)))
 		return count;
 
 	/* scan QTDs till end of list, or we reach an active one */
@@ -225,7 +236,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		/* clean up any state from previous QTD ...*/
 		if (last) {
 			if (likely (last->urb != urb)) {
-				ehci_urb_done (ehci, last->urb);
+				ehci_urb_done (ehci, last->urb, regs);
 				count++;
 			}
 			ehci_qtd_free (ehci, last);
@@ -236,12 +247,14 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		/* QTDs at tail may be active if QH+HC are running,
 		 * or when unlinking some urbs queued to this QH
 		 */
+		rmb ();
 		token = le32_to_cpu (qtd->hw_token);
-		halted = halted
+		stopped = stopped
+			|| (qh->qh_state == QH_STATE_IDLE)
 			|| (__constant_cpu_to_le32 (QTD_STS_HALT)
 				& qh->hw_token) != 0
 			|| (ehci->hcd.state == USB_STATE_HALT)
-			|| (qh->qh_state == QH_STATE_IDLE);
+			|| (qh->hw_current == ehci->async->hw_alt_next);
 
 		// FIXME Remove the automagic unlink mode.
 		// Drivers can now clean up safely; it's their job.
@@ -257,7 +270,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 			/* status copied below */
 
 		/* QH halts only because of fault (above) or unlink (here). */
-		} else if (unlikely (halted != 0)) {
+		} else if (unlikely (stopped != 0)) {
 
 			/* unlinking everything because of HC shutdown? */
 			if (ehci->hcd.state == USB_STATE_HALT) {
@@ -293,32 +306,22 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 
 		spin_lock (&urb->lock);
-		qtd_copy_status (urb, qtd->length, token);
+		qtd_copy_status (ehci, urb, qtd->length, token);
 		spin_unlock (&urb->lock);
 
 		list_del (&qtd->qtd_list);
-
-#if 0
-		if (urb->status == -EINPROGRESS)
-			vdbg ("  qtd %p ok, urb %p, token %8x, len %d",
-				qtd, urb, token, urb->actual_length);
-		else
-			vdbg ("urb %p status %d, qtd %p, token %8x, len %d",
-				urb, urb->status, qtd, token,
-				urb->actual_length);
-#endif
 	}
 
 	/* last urb's completion might still need calling */
 	if (likely (last != 0)) {
-		ehci_urb_done (ehci, last->urb);
+		ehci_urb_done (ehci, last->urb, regs);
 		count++;
 		ehci_qtd_free (ehci, last);
 	}
 
 	/* reactivate queue after error and driver's cleanup */
-	if (unlikely (halted && !list_empty (qtd_list))) {
-		qh_update (qh, list_entry (qtd_list->next,
+	if (unlikely (stopped && !list_empty (&qh->qtd_list))) {
+		qh_update (ehci, qh, list_entry (qh->qtd_list.next,
 				struct ehci_qtd, qtd_list));
 	}
 
@@ -369,7 +372,6 @@ qh_urb_transaction (
 	qtd = ehci_qtd_alloc (ehci, flags);
 	if (unlikely (!qtd))
 		return 0;
-	qtd_prev = 0;
 	list_add_tail (&qtd->qtd_list, head);
 	qtd->urb = urb;
 
@@ -377,6 +379,8 @@ qh_urb_transaction (
 	token |= (EHCI_TUNE_CERR << 10);
 	/* for split transactions, SplitXState initialized to zero */
 
+	len = urb->transfer_buffer_length;
+	is_input = usb_pipein (urb->pipe);
 	if (usb_pipecontrol (urb->pipe)) {
 		/* SETUP pid */
 		qtd_fill (qtd, urb->setup_dma, sizeof (struct usb_ctrlrequest),
@@ -392,15 +396,14 @@ qh_urb_transaction (
 		qtd_prev->hw_next = QTD_NEXT (qtd->qtd_dma);
 		list_add_tail (&qtd->qtd_list, head);
 
-		if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
+		if (len > 0 && is_input
+				&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
 			status_patch = 1;
 	} 
 
 	/*
 	 * data transfer stage:  buffer setup
 	 */
-	len = urb->transfer_buffer_length;
-	is_input = usb_pipein (urb->pipe);
 	if (likely (len > 0))
 		buf = urb->transfer_dma;
 	else
@@ -420,7 +423,6 @@ qh_urb_transaction (
 	for (;;) {
 		int this_qtd_len;
 
-		qtd->urb = urb;
 		this_qtd_len = qtd_fill (qtd, buf, len, token);
 		len -= this_qtd_len;
 		buf += this_qtd_len;
@@ -578,7 +580,6 @@ ehci_qh_make (
 			if (qh->period < 1) {
 				dbg ("intr period %d uframes, NYET!",
 						urb->interval);
-				qh = 0;
 				goto done;
 			}
 		} else {
@@ -639,7 +640,9 @@ ehci_qh_make (
 		break;
 	default:
  		dbg ("bogus dev %p speed %d", urb->dev, urb->dev->speed);
- 		return 0;
+done:
+		qh_put (ehci, qh);
+		return 0;
 	}
 
 	/* NOTE:  if (PIPE_INTERRUPT) { scheduler sets s-mask } */
@@ -658,15 +661,13 @@ ehci_qh_make (
 
 		list_splice (qtd_list, &qh->qtd_list);
 		qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list);
-		qh_update (qh, qtd);
+		qh_update (ehci, qh, qtd);
 	} else {
 		qh->hw_qtd_next = qh->hw_alt_next = EHCI_LIST_END;
 	}
 
 	/* initialize data toggle state */
 	clear_toggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, qh);
-
-done:
 	return qh;
 }
 #undef hb_mult
@@ -698,6 +699,8 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 		}
 	}
 
+	qh->hw_token &= ~__constant_cpu_to_le32 (QTD_STS_HALT);
+
 	/* splice right after start */
 	qh->qh_next = head->qh_next;
 	qh->hw_next = head->hw_next;
@@ -774,8 +777,8 @@ static struct ehci_qh *qh_append_tds (
 			 */
 			token = qtd->hw_token;
 			qtd->hw_token = 0;
+			wmb ();
 			dummy = qh->dummy;
-			// dbg ("swap td %p with dummy %p", qtd, dummy);
 
 			dma = dummy->qtd_dma;
 			*dummy = *qtd;
@@ -784,9 +787,11 @@ static struct ehci_qh *qh_append_tds (
 			list_add (&dummy->qtd_list, qtd_list);
 
 			ehci_qtd_init (qtd, qtd->qtd_dma);
+			qtd->hw_alt_next = ehci->async->hw_alt_next;
 			qh->dummy = qtd;
 
 			/* hc must see the new dummy at list end */
+			dma = qtd->qtd_dma;
 			qtd = list_entry (qh->qtd_list.prev,
 					struct ehci_qtd, qtd_list);
 			qtd->hw_next = QTD_NEXT (dma);
@@ -797,15 +802,6 @@ static struct ehci_qh *qh_append_tds (
 
 		/* no URB queued */
 		} else {
-			struct ehci_qtd		*last_qtd;
-
-			/* make sure hc sees current dummy at the end */
-			last_qtd = list_entry (qtd_list->prev,
-					struct ehci_qtd, qtd_list);
-			last_qtd->hw_next = QTD_NEXT (qh->dummy->qtd_dma);
-
-			// dbg_qh ("empty qh", ehci, qh);
-
 			/* usb_clear_halt() means qh data toggle gets reset */
 			if (unlikely (!usb_gettoggle (urb->dev,
 						(epnum & 0x0f),
@@ -813,15 +809,23 @@ static struct ehci_qh *qh_append_tds (
 				clear_toggle (urb->dev,
 					epnum & 0x0f, !(epnum & 0x10), qh);
 			}
-			if (qtd)
-				qh_update (qh, qtd);
+
+			/* make sure hc sees current dummy at the end */
+			if (qtd) {
+				struct ehci_qtd		*last_qtd;
+
+				last_qtd = list_entry (qtd_list->prev,
+						struct ehci_qtd, qtd_list);
+				last_qtd->hw_next = QTD_NEXT (
+						qh->dummy->qtd_dma);
+				qh_update (ehci, qh, qtd);
+			}
 		}
 		list_splice (qtd_list, qh->qtd_list.prev);
 
 	} else {
 		/* can't sleep here, we have ehci->lock... */
 		qh = ehci_qh_make (ehci, urb, qtd_list, SLAB_ATOMIC);
-		// if (qh) dbg_qh ("new qh", ehci, qh);
 		*ptr = qh;
 	}
 	if (qh)
@@ -877,34 +881,38 @@ submit_async (
 /*-------------------------------------------------------------------------*/
 
 /* the async qh for the qtds being reclaimed are now unlinked from the HC */
-/* caller must not own ehci->lock */
 
-static void end_unlink_async (struct ehci_hcd *ehci)
+static void end_unlink_async (struct ehci_hcd *ehci, struct pt_regs *regs)
 {
 	struct ehci_qh		*qh = ehci->reclaim;
 
 	del_timer (&ehci->watchdog);
 
+	qh->hw_next = cpu_to_le32 (qh->qh_dma);
 	qh->qh_state = QH_STATE_IDLE;
 	qh->qh_next.qh = 0;
 	qh_put (ehci, qh);			// refcount from reclaim 
 	ehci->reclaim = 0;
 	ehci->reclaim_ready = 0;
 
-	qh_completions (ehci, qh);
+	qh_completions (ehci, qh, regs);
 
 	if (!list_empty (&qh->qtd_list)
 			&& HCD_IS_RUNNING (ehci->hcd.state))
 		qh_link_async (ehci, qh);
-	else
+	else {
 		qh_put (ehci, qh);		// refcount from async list
 
-	/* it's not free to turn the async schedule on/off, so we leave it
-	 * active but idle for a while once it empties.
-	 */
-	if (!ehci->async->qh_next.qh && !timer_pending (&ehci->watchdog)) {
-		ehci->async_idle = 1;
-		mod_timer (&ehci->watchdog, jiffies + EHCI_ASYNC_JIFFIES);
+		/* it's not free to turn the async schedule on/off; leave it
+		 * active but idle for a while once it empties.
+		 */
+		if (HCD_IS_RUNNING (ehci->hcd.state)
+				&& ehci->async->qh_next.qh == 0
+				&& !timer_pending (&ehci->watchdog)) {
+			ehci->async_idle = 1;
+			mod_timer (&ehci->watchdog,
+					jiffies + EHCI_ASYNC_JIFFIES);
+		}
 	}
 }
 
@@ -941,12 +949,6 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	qh->qh_state = QH_STATE_UNLINK;
 	ehci->reclaim = qh = qh_get (qh);
 
-	if (unlikely (ehci->hcd.state == USB_STATE_HALT)) {
-		ehci->reclaim_ready = 1;
-		tasklet_schedule (&ehci->tasklet);
-		return;
-	}
-
 	prev = ehci->async;
 	while (prev->qh_next.qh != qh)
 		prev = prev->qh_next.qh;
@@ -955,6 +957,11 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 	prev->qh_next = qh->qh_next;
 	wmb ();
 
+	if (unlikely (ehci->hcd.state == USB_STATE_HALT)) {
+		end_unlink_async (ehci, NULL);
+		return;
+	}
+
 	ehci->reclaim_ready = 0;
 	cmd |= CMD_IAAD;
 	writel (cmd, &ehci->regs->command);
@@ -966,7 +973,7 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
 /*-------------------------------------------------------------------------*/
 
 static void
-scan_async (struct ehci_hcd *ehci)
+scan_async (struct ehci_hcd *ehci, struct pt_regs *regs)
 {
 	struct ehci_qh		*qh;
 	unsigned		count;
@@ -984,7 +991,7 @@ scan_async (struct ehci_hcd *ehci)
 				 * reporting drops the lock.
 				 */
 				qh = qh_get (qh);
-				temp = qh_completions (ehci, qh);
+				temp = qh_completions (ehci, qh, regs);
 				qh_put (ehci, qh);
 				if (temp != 0) {
 					count += temp;
@@ -1002,14 +1009,6 @@ scan_async (struct ehci_hcd *ehci)
 				start_unlink_async (ehci, qh);
 			}
 
-			/* keep latencies down: let any irqs in */
-			if (count > max_completions) {
-				spin_unlock_irq (&ehci->lock);
-				cpu_relax ();
-				spin_lock_irq (&ehci->lock);
-				goto rescan;
-			}
-
 			qh = qh->qh_next.qh;
 		} while (qh);
 	}

drivers/usb/host/ehci-sched.c

@@ -190,7 +190,7 @@ static int enable_periodic (struct ehci_hcd *ehci)
 	/* posted write ... PSS happens later */
 	ehci->hcd.state = USB_STATE_RUNNING;
 
-	/* make sure tasklet scans these */
+	/* make sure ehci_work scans these */
 	ehci->next_uframe = readl (&ehci->regs->frame_index)
 				% (ehci->periodic_size << 3);
 	return 0;
@@ -495,7 +495,8 @@ static unsigned
 intr_complete (
 	struct ehci_hcd	*ehci,
 	unsigned	frame,
-	struct ehci_qh	*qh
+	struct ehci_qh	*qh,
+	struct pt_regs	*regs
 ) {
 	unsigned	count;
 
@@ -509,7 +510,7 @@ intr_complete (
 	}
 	
 	/* handle any completions */
-	count = qh_completions (ehci, qh);
+	count = qh_completions (ehci, qh, regs);
 
 	if (unlikely (list_empty (&qh->qtd_list)))
 		intr_deschedule (ehci, qh, 0);
@@ -867,7 +868,8 @@ static unsigned
 itd_complete (
 	struct ehci_hcd	*ehci,
 	struct ehci_itd	*itd,
-	unsigned	uframe
+	unsigned	uframe,
+	struct pt_regs	*regs
 ) {
 	struct urb				*urb = itd->urb;
 	struct usb_iso_packet_descriptor	*desc;
@@ -922,7 +924,7 @@ itd_complete (
 
 	/* complete() can reenter this HCD */
 	spin_unlock (&ehci->lock);
-	usb_hcd_giveback_urb (&ehci->hcd, urb, NULL);
+	usb_hcd_giveback_urb (&ehci->hcd, urb, regs);
 	spin_lock (&ehci->lock);
 
 	/* defer stopping schedule; completion can submit */
@@ -973,7 +975,7 @@ static int itd_submit (struct ehci_hcd *ehci, struct urb *urb, int mem_flags)
 /*-------------------------------------------------------------------------*/
 
 static void
-scan_periodic (struct ehci_hcd *ehci)
+scan_periodic (struct ehci_hcd *ehci, struct pt_regs *regs)
 {
 	unsigned	frame, clock, now_uframe, mod;
 	unsigned	count = 0;
@@ -999,14 +1001,6 @@ scan_periodic (struct ehci_hcd *ehci)
 		u32			type, *hw_p;
 		unsigned		uframes;
 
-		/* keep latencies down: let any irqs in */
-		if (count > max_completions) {
-			spin_unlock_irq (&ehci->lock);
-			cpu_relax ();
-			count = 0;
-			spin_lock_irq (&ehci->lock);
-		}
-
 restart:
 		/* scan schedule to _before_ current frame index */
 		if (frame == clock)
@@ -1031,7 +1025,7 @@ scan_periodic (struct ehci_hcd *ehci)
 				temp = q.qh->qh_next;
 				type = Q_NEXT_TYPE (q.qh->hw_next);
 				count += intr_complete (ehci, frame,
-						qh_get (q.qh));
+						qh_get (q.qh), regs);
 				qh_put (ehci, q.qh);
 				q = temp;
 				break;
@@ -1064,7 +1058,7 @@ scan_periodic (struct ehci_hcd *ehci)
 
 						/* might free q.itd ... */
 						count += itd_complete (ehci,
-							temp.itd, uf);
+							temp.itd, uf, regs);
 						break;
 					}
 				}

drivers/usb/host/ehci.h

@@ -65,9 +65,6 @@ struct ehci_hcd {			/* one per controller */
 	int			next_uframe;	/* scan periodic, start here */
 	unsigned		periodic_sched;	/* periodic activity count */
 
-	/* deferred work from IRQ, etc */
-	struct tasklet_struct	tasklet;
-
 	/* per root hub port */
 	unsigned long		reset_done [EHCI_MAX_ROOT_PORTS];
 

drivers/usb/media/ibmcam.c

@@ -87,7 +87,7 @@ typedef struct {
 } ibmcam_t;
 #define	IBMCAM_T(uvd)	((ibmcam_t *)((uvd)->user_data))
 
-usbvideo_t *cams = NULL;
+struct usbvideo *cams = NULL;
 
 static int debug = 0;
 
@@ -249,7 +249,7 @@ static videosize_t ibmcam_size_to_videosize(int size)
  * History:
  * 1/21/00  Created.
  */
-static ParseState_t ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
+static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
 {
 	struct usbvideo_frame *frame;
 	ibmcam_t *icam;
@@ -397,7 +397,7 @@ case IBMCAM_MODEL_4:
  * 21-Jan-2000 Created.
  * 12-Oct-2000 Reworked to reflect interlaced nature of the data.
  */
-static ParseState_t ibmcam_parse_lines(
+static enum ParseState ibmcam_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -662,7 +662,7 @@ static ParseState_t ibmcam_parse_lines(
  * them both as R component in attempt to at least partially recover the
  * lost resolution.
  */
-static ParseState_t ibmcam_model2_320x240_parse_lines(
+static enum ParseState ibmcam_model2_320x240_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -816,7 +816,7 @@ static ParseState_t ibmcam_model2_320x240_parse_lines(
 		return scan_Continue;
 }
 
-static ParseState_t ibmcam_model3_parse_lines(
+static enum ParseState ibmcam_model3_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -961,7 +961,7 @@ static ParseState_t ibmcam_model3_parse_lines(
  * History:
  * 10-Feb-2001 Created.
  */
-static ParseState_t ibmcam_model4_128x96_parse_lines(
+static enum ParseState ibmcam_model4_128x96_parse_lines(
 	struct uvd *uvd,
 	struct usbvideo_frame *frame,
 	long *pcopylen)
@@ -1051,7 +1051,7 @@ static ParseState_t ibmcam_model4_128x96_parse_lines(
  */
 void ibmcam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame)
 {
-	ParseState_t newstate;
+	enum ParseState newstate;
 	long copylen = 0;
 	int mod = IBMCAM_T(uvd)->camera_model;
 

drivers/usb/media/konicawc.c

@@ -51,7 +51,7 @@ enum frame_sizes {
 
 #define MAX_FRAME_SIZE	SIZE_320X240
 
-static usbvideo_t *cams;
+static struct usbvideo *cams;
 
 #ifdef CONFIG_USB_DEBUG
 static int debug;

drivers/usb/media/pwc-ctrl.c

@@ -446,8 +446,8 @@ int pwc_set_video_mode(struct pwc_device *pdev, int width, int height, int frame
 			Info("Video mode %s@%d fps is only supported with the decompressor module (pwcx).\n", size2name[size], frames);
 		else {
 			Err("Failed to set video mode %s@%d fps; return code = %d\n", size2name[size], frames, ret);
-			return ret;
 		}
+		return ret;
 	}
 	pdev->view.x = width;
 	pdev->view.y = height;
@@ -1534,7 +1534,15 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 		*dynnoise = ret;
 		break;
 	}
-	
+
+	case VIDIOCPWCGREALSIZE:
+	{
+		struct pwc_imagesize *size = arg;
+		
+		size->width = pdev->image.x;
+		size->height = pdev->image.y;
+		break;
+	}	
 
 	default:
 		ret = -ENOIOCTLCMD;

drivers/usb/media/pwc-if.c

@@ -77,7 +77,7 @@ static struct usb_device_id pwc_device_table [] = {
 	{ USB_DEVICE(0x0471, 0x0312) },
 	{ USB_DEVICE(0x069A, 0x0001) }, /* Askey */
 	{ USB_DEVICE(0x046D, 0x08b0) }, /* Logitech QuickCam Pro 3000 */
-	{ USB_DEVICE(0x046D, 0x08b1) }, /* Logitech QuickCam for Notebooks */
+	{ USB_DEVICE(0x046D, 0x08b1) }, /* Logitech QuickCam Notebook Pro */
 	{ USB_DEVICE(0x046D, 0x08b2) }, /* Logitech QuickCam Pro 4000 */
 	{ USB_DEVICE(0x046D, 0x08b3) }, /* Logitech QuickCam Zoom */
 	{ USB_DEVICE(0x055D, 0x9000) }, /* Samsung */
@@ -992,7 +992,7 @@ static int pwc_video_open(struct inode *inode, struct file *file)
 			case 0x40:  sensor_type = "UPA 1021 sensor"; break;
 			case 0x100: sensor_type = "VGA sensor"; break;
 			case 0x101: sensor_type = "PAL MR sensor"; break;
-			default:   sensor_type = "unknown type of sensor"; break;
+			default:    sensor_type = "unknown type of sensor"; break;
 			}
 			if (sensor_type != NULL)
 				Info("This %s camera is equipped with a %s (%d).\n", pdev->vdev->name, sensor_type, i);
@@ -1064,7 +1064,6 @@ static int pwc_video_open(struct inode *inode, struct file *file)
 	i = pwc_isoc_init(pdev);
 	if (i) {
 		Trace(TRACE_OPEN, "Failed to init ISOC stuff = %d.\n", i);
-		MOD_DEC_USE_COUNT;
 		up(&pdev->modlock);
 		return i;
 	}
@@ -1689,8 +1688,8 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id
 			type_id = 730;
 			break;
 		case 0x08b1:
-			Info("Logitech QuickCam for Noteboos USB webcam detected.\n");
-			name = "Logitech QuickCam Notebook";
+			Info("Logitech QuickCam Notebook Pro USB webcam detected.\n");
+			name = "Logitech QuickCam Notebook Pro";
 			type_id = 740; /* ?? unknown sensor */
 			break;
 		case 0x08b2:

drivers/usb/media/pwc-ioctl.h

@@ -18,12 +18,13 @@
    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 
-/*         This is pwc-ioctl.h belonging to PWC 8.7                        */
+/*         This is pwc-ioctl.h belonging to PWC 8.10                        */
 
 /* 
    Changes
    2001/08/03  Alvarado   Added ioctl constants to access methods for 
                           changing white balance and red/blue gains
+   2002/12/15  G. H. Fernandez-Toribio   VIDIOCGREALSIZE
  */
 
 /* These are private ioctl() commands, specific for the Philips webcams.
@@ -104,7 +105,12 @@ struct pwc_leds
 	int led_off;			/* Led off-time; range = 0..25000  */
 };
 
-
+/* Image size (used with GREALSIZE) */
+struct pwc_imagesize
+{
+	int width;
+	int height;
+};
 
  /* Restore user settings */
 #define VIDIOCPWCRUSER		_IO('v', 192)
@@ -173,4 +179,7 @@ struct pwc_leds
 #define VIDIOCPWCSDYNNOISE	_IOW('v', 209, int)
 #define VIDIOCPWCGDYNNOISE	_IOR('v', 209, int)
 
+ /* Real image size as used by the camera; tells you whether or not there's a gray border around the image */
+#define VIDIOCPWCGREALSIZE	_IOR('v', 210, struct pwc_imagesize)
+ 
 #endif

drivers/usb/media/pwc-uncompress.h

@@ -20,8 +20,8 @@
    significant change should be reflected by increasing the 
    pwc_decompressor_version major number.
  */
-#ifndef PWC_DEC_H
-#define PWC_DEC_H
+#ifndef PWC_UNCOMPRESS_H
+#define PWC_UNCOMPRESS_H
 
 #include <linux/config.h>
 #include <linux/list.h>

drivers/usb/media/pwc.h

@@ -60,8 +60,8 @@
 
 /* Version block */
 #define PWC_MAJOR	8
-#define PWC_MINOR	9
-#define PWC_VERSION 	"8.9"
+#define PWC_MINOR	10
+#define PWC_VERSION 	"8.10"
 #define PWC_NAME 	"pwc"
 
 /* Turn certain features on/off */

drivers/usb/media/ultracam.c

@@ -25,7 +25,7 @@ typedef struct {
 } ultracam_t;
 #define	ULTRACAM_T(uvd)	((ultracam_t *)((uvd)->user_data))
 
-static usbvideo_t *cams = NULL;
+static struct usbvideo *cams = NULL;
 
 static int debug = 0;
 

drivers/usb/media/usbvideo.c

@@ -42,8 +42,8 @@ MODULE_PARM(video_nr, "i");
  * Local prototypes.
  */
 #if USES_PROC_FS
-static void usbvideo_procfs_level1_create(usbvideo_t *ut);
-static void usbvideo_procfs_level1_destroy(usbvideo_t *ut);
+static void usbvideo_procfs_level1_create(struct usbvideo *ut);
+static void usbvideo_procfs_level1_destroy(struct usbvideo *ut);
 static void usbvideo_procfs_level2_create(struct uvd *uvd);
 static void usbvideo_procfs_level2_destroy(struct uvd *uvd);
 static int usbvideo_default_procfs_read_proc(
@@ -765,7 +765,7 @@ static void usbvideo_ClientDecModCount(struct uvd *uvd)
 }
 
 int usbvideo_register(
-	usbvideo_t **pCams,
+	struct usbvideo **pCams,
 	const int num_cams,
 	const int num_extra,
 	const char *driverName,
@@ -773,7 +773,7 @@ int usbvideo_register(
 	struct module *md,
 	const struct usb_device_id *id_table)
 {
-	usbvideo_t *cams;
+	struct usbvideo *cams;
 	int i, base_size;
 
 	/* Check parameters for sanity */
@@ -788,10 +788,10 @@ int usbvideo_register(
 		return -EINVAL;
 	}
 
-	base_size = num_cams * sizeof(struct uvd) + sizeof(usbvideo_t);
-	cams = (usbvideo_t *) kmalloc(base_size, GFP_KERNEL);
+	base_size = num_cams * sizeof(struct uvd) + sizeof(struct usbvideo);
+	cams = (struct usbvideo *) kmalloc(base_size, GFP_KERNEL);
 	if (cams == NULL) {
-		err("Failed to allocate %d. bytes for usbvideo_t", base_size);
+		err("Failed to allocate %d. bytes for usbvideo struct", base_size);
 		return -ENOMEM;
 	}
 	dbg("%s: Allocated $%p (%d. bytes) for %d. cameras",
@@ -823,7 +823,7 @@ int usbvideo_register(
 #else /* !USES_PROC_FS */
 	/* Report a warning so that user knows why there is no /proc entries */
 	if ((cams->cb.procfs_read != NULL) || (cams->cb.procfs_write == NULL)) {
-		dbg("%s: /proc fs support requested but not configured!", proc);
+		dbg("%s: /proc fs support requested but not configured!", __FUNCTION__);
 	}
 #endif
 	cams->num_cameras = num_cams;
@@ -889,9 +889,9 @@ EXPORT_SYMBOL(usbvideo_register);
  * if you had some dynamically allocated components in ->user field then
  * you should free them before calling here.
  */
-void usbvideo_Deregister(usbvideo_t **pCams)
+void usbvideo_Deregister(struct usbvideo **pCams)
 {
-	usbvideo_t *cams;
+	struct usbvideo *cams;
 	int i;
 
 	if (pCams == NULL) {
@@ -1049,12 +1049,12 @@ static void usbvideo_CameraRelease(struct uvd *uvd)
  * History:
  * 27-Jan-2000 Created.
  */
-static int usbvideo_find_struct(usbvideo_t *cams)
+static int usbvideo_find_struct(struct usbvideo *cams)
 {
 	int u, rv = -1;
 
 	if (cams == NULL) {
-		err("No usbvideo_t handle?");
+		err("No usbvideo handle?");
 		return -1;
 	}
 	down(&cams->lock);
@@ -1089,13 +1089,13 @@ static struct video_device usbvideo_template = {
 	.fops =       &usbvideo_fops,
 };
 
-struct uvd *usbvideo_AllocateDevice(usbvideo_t *cams)
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams)
 {
 	int i, devnum;
 	struct uvd *uvd = NULL;
 
 	if (cams == NULL) {
-		err("No usbvideo_t handle?");
+		err("No usbvideo handle?");
 		return NULL;
 	}
 
@@ -2357,7 +2357,7 @@ static void usbvideo_SoftwareContrastAdjustment(struct uvd *uvd,
 
 extern struct proc_dir_entry *video_proc_entry;
 
-static void usbvideo_procfs_level1_create(usbvideo_t *ut)
+static void usbvideo_procfs_level1_create(struct usbvideo *ut)
 {
 	if (ut == NULL) {
 		err("%s: ut == NULL", __FUNCTION__);
@@ -2376,7 +2376,7 @@ static void usbvideo_procfs_level1_create(usbvideo_t *ut)
 	}
 }
 
-static void usbvideo_procfs_level1_destroy(usbvideo_t *ut)
+static void usbvideo_procfs_level1_destroy(struct usbvideo *ut)
 {
 	if (ut == NULL) {
 		err("%s: ut == NULL", __FUNCTION__);

drivers/usb/media/usbvideo.h

@@ -126,37 +126,37 @@ struct RingQueue {
 	wait_queue_head_t wqh;	/* Processes waiting */
 };
 
-typedef enum {
+enum ScanState {
 	ScanState_Scanning,	/* Scanning for header */
 	ScanState_Lines		/* Parsing lines */
-} ScanState_t;
+};
 
 /* Completion states of the data parser */
-typedef enum {
+enum ParseState {
 	scan_Continue,		/* Just parse next item */
 	scan_NextFrame,		/* Frame done, send it to V4L */
 	scan_Out,		/* Not enough data for frame */
 	scan_EndParse		/* End parsing */
-} ParseState_t;
+};
 
-typedef enum {
+enum FrameState {
 	FrameState_Unused,	/* Unused (no MCAPTURE) */
 	FrameState_Ready,	/* Ready to start grabbing */
 	FrameState_Grabbing,	/* In the process of being grabbed into */
 	FrameState_Done,	/* Finished grabbing, but not been synced yet */
 	FrameState_Done_Hold,	/* Are syncing or reading */
 	FrameState_Error,	/* Something bad happened while processing */
-} FrameState_t;
+};
 
 /*
  * Some frames may contain only even or odd lines. This type
  * specifies what type of deinterlacing is required.
  */
-typedef enum {
+enum Deinterlace {
 	Deinterlace_None=0,
 	Deinterlace_FillOddLines,
 	Deinterlace_FillEvenLines
-} Deinterlace_t;
+};
 
 #define USBVIDEO_NUMFRAMES	2	/* How many frames we work with */
 #define USBVIDEO_NUMSBUF	2	/* How many URBs linked in a ring */
@@ -175,9 +175,9 @@ struct usbvideo_frame {
 	videosize_t request;	/* That's what the application asked for */
 	unsigned short palette;	/* The desired format */
 
-	FrameState_t frameState;/* State of grabbing */
-	ScanState_t scanstate;	/* State of scanning */
-	Deinterlace_t deinterlace;
+	enum FrameState frameState;/* State of grabbing */
+	enum ScanState scanstate;	/* State of scanning */
+	enum Deinterlace deinterlace;
 	int flags;		/* USBVIDEO_FRAME_FLAG_xxx bit flags */
 
 	int curline;		/* Line of frame we're working on */
@@ -199,12 +199,12 @@ struct usbvideo_statistics {
 	unsigned long iso_err_count;	/* How many bad ISO packets received */
 };
 
-struct s_usbvideo_t;
+struct usbvideo;
 
 struct uvd {
 	struct video_device vdev;	/* Must be the first field! */
 	struct usb_device *dev;
-	struct s_usbvideo_t *handle;	/* Points back to the usbvideo_t */
+	struct usbvideo *handle;	/* Points back to the struct usbvideo */
 	void *user_data;		/* Camera-dependent data */
 	int user_size;			/* Size of that camera-dependent data */
 	int debug;			/* Debug level for usbvideo */
@@ -273,7 +273,7 @@ struct usbvideo_cb {
 	int (*setVideoMode)(struct uvd *uvd, struct video_window *vw);
 };
 
-struct s_usbvideo_t {
+struct usbvideo {
 	int num_cameras;		/* As allocated */
 	struct usb_driver usbdrv;	/* Interface to the USB stack */
 	char drvName[80];		/* Driver name */
@@ -285,7 +285,7 @@ struct s_usbvideo_t {
 	struct proc_dir_entry *procfs_dEntry;	/* /proc/video/MYDRIVER */
 	struct module *md_module;	/* Minidriver module */
 };
-typedef struct s_usbvideo_t usbvideo_t;
+
 
 /*
  * This macro retrieves callback address from the struct uvd object.
@@ -332,16 +332,16 @@ void usbvideo_TestPattern(struct uvd *uvd, int fullframe, int pmode);
 unsigned long usbvideo_kvirt_to_pa(unsigned long adr);
 
 int usbvideo_register(
-	usbvideo_t **pCams,
+	struct usbvideo **pCams,
 	const int num_cams,
 	const int num_extra,
 	const char *driverName,
 	const struct usbvideo_cb *cbTable,
 	struct module *md,
 	const struct usb_device_id *id_table);
-struct uvd *usbvideo_AllocateDevice(usbvideo_t *cams);
+struct uvd *usbvideo_AllocateDevice(struct usbvideo *cams);
 int usbvideo_RegisterVideoDevice(struct uvd *uvd);
-void usbvideo_Deregister(usbvideo_t **uvt);
+void usbvideo_Deregister(struct usbvideo **uvt);
 
 int usbvideo_v4l_initialize(struct video_device *dev);
 

drivers/usb/misc/speedtouch.c

@@ -144,8 +144,9 @@ struct udsl_instance_data *minor_data[MAX_UDSL];
 static const char udsl_driver_name[] = "Alcatel SpeedTouch USB";
 
 /* data thread */
-static int datapid = 0;
 DECLARE_WAIT_QUEUE_HEAD (udsl_wqh);
+static DECLARE_COMPLETION(thread_grave);
+static unsigned int datapid;
 
 #ifdef DEBUG_PACKET
 int udsl_print_packet (const unsigned char *data, int len);
@@ -431,21 +432,36 @@ int udsl_atm_processqueue_thread (void *data)
 	strcpy (current->comm, "kSpeedSARd");
 
 	add_wait_queue (&udsl_wqh, &wait);
+	set_current_state(TASK_INTERRUPTIBLE);
 
 	for (;;) {
-		interruptible_sleep_on (&udsl_wqh);
+		schedule();
 		if (signal_pending (current))
 			break;
 		PDEBUG ("SpeedSARd awoke\n");
+retry:
 		for (i = 0; i < MAX_UDSL; i++)
 			if (minor_data[i])
 				udsl_atm_processqueue (minor_data[i]);
+		set_current_state(TASK_INTERRUPTIBLE);
+		/* we must check for data recieved and restart processing if there's any */
+		for (i = 0; i < MAX_UDSL; i++) {
+			spin_lock_irq(&minor_data[i]->recvqlock);
+			if (!skb_queue_empty(&minor_data[i]->recvqueue)) {
+				spin_unlock_irq(&minor_data[i]->recvqlock);
+				set_current_state(TASK_RUNNING);
+				goto retry;
+			} else {
+				spin_unlock_irq(&minor_data[i]->recvqlock);
+			}
+		}
 	};
 
+	set_current_state(TASK_RUNNING);
 	remove_wait_queue (&udsl_wqh, &wait);
-	datapid = 0;
 	PDEBUG ("SpeedSARd is exiting\n");
-	return 0;
+	complete_and_exit(&thread_grave, 0);
+	return 0; //never reached
 }
 
 
@@ -461,16 +477,7 @@ void udsl_atm_sar_stop (void)
 	/* Kill the thread */
 	ret = kill_proc (datapid, SIGTERM, 1);
 	if (!ret) {
-		/* Wait 10 seconds */
-		int count = 10 * 100;
-
-		while (datapid && --count) {
-			current->state = TASK_INTERRUPTIBLE;
-			schedule_timeout (1);
-		}
-
-		if (!count)
-			err ("giving up on killing SpeedSAR thread.");
+		wait_for_completion(&thread_grave);
 	}
 }
 
@@ -598,7 +605,7 @@ static void udsl_usb_send_data_complete (struct urb *urb, struct pt_regs *regs)
 		       (unsigned char *) ctx->skb->data,
 		       ctx->skb->len, udsl_usb_send_data_complete, ctx);
 
-	err = usb_submit_urb (urb, GFP_KERNEL);
+	err = usb_submit_urb (urb, GFP_ATOMIC);
 
 	PDEBUG ("udsl_usb_send_data_completion (send packet %p with length %d), retval = %d\n",
 		ctx->skb, ctx->skb->len, err);
@@ -747,7 +754,7 @@ void udsl_usb_data_receive (struct urb *urb, struct pt_regs *regs)
 		       usb_rcvbulkpipe (instance->usb_dev, UDSL_ENDPOINT_DATA_IN),
 		       (unsigned char *) ctx->skb->data,
 		       UDSL_RECEIVE_BUFFER_SIZE, udsl_usb_data_receive, ctx);
-	usb_submit_urb (urb, GFP_KERNEL);
+	usb_submit_urb (urb, GFP_ATOMIC);
 	return;
 };
 
@@ -845,8 +852,7 @@ static int udsl_usb_data_exit (struct udsl_instance_data *instance)
 		if ((!ctx->urb) || (!ctx->skb))
 			continue;
 
-		if (ctx->urb->status == -EINPROGRESS)
-			usb_unlink_urb (ctx->urb);
+		usb_unlink_urb (ctx->urb);
 
 		usb_free_urb (ctx->urb);
 		kfree_skb (ctx->skb);
@@ -856,8 +862,7 @@ static int udsl_usb_data_exit (struct udsl_instance_data *instance)
 	for (i = 0; i < UDSL_NUMBER_SND_URBS; i++) {
 		struct udsl_usb_send_data_context *ctx = &(instance->send_ctx[i]);
 
-		if (ctx->urb->status == -EINPROGRESS)
-			usb_unlink_urb (ctx->urb);
+		usb_unlink_urb (ctx->urb);
 
 		if (ctx->skb)
 			ctx->vcc->pop (ctx->vcc, ctx->skb);

drivers/usb/misc/usblcd.c

@@ -98,7 +98,7 @@ ioctl_lcd(struct inode *inode, struct file *file, unsigned int cmd,
 			return -EFAULT;
 		break;
 	default:
-		return -ENOIOCTLCMD;
+		return -ENOTTY;
 		break;
 	}
 

drivers/usb/net/usbnet.c

@@ -35,7 +35,7 @@
  *	- GeneSys GL620USB-A
  *	- NetChip 1080 (interoperates with NetChip Win32 drivers)
  *	- Prolific PL-2301/2302 (replaces "plusb" driver)
- *	- SA-1100 based Linux PDAs like iPaq, Yopy, and Zaurus
+ *	- PXA-250 or SA-1100 Linux PDAs like iPaq, Yopy, and Zaurus
  *
  * USB devices can implement their side of this protocol at the cost
  * of two bulk endpoints; it's not restricted to "cable" applications.
@@ -61,8 +61,9 @@
  *   sheets, sometimes it's not needed and sometimes it hangs.  Prolific has
  *   not responded to repeated support/information requests.
  *
- * - SA-1100 PDAs ... the www.handhelds.org SA-1100 support works nicely.
- *   Zaurus support has some problems; it's made UHCI die.
+ * - SA-1100 PDAs ... the standard ARM Linux SA-1100 support works nicely,
+ *   as found in www.handhelds.org and other kernels.  The Sharp/Lineo
+ *   kernels use different drivers, which also talk to this code.
  *
  * Interop with more Win32 drivers may be a good thing.
  *
@@ -116,7 +117,10 @@
  * 07-may-2002	Generalize/cleanup keventd support, handling rx stalls (mostly
  *		for USB 2.0 TTs) and memory shortages (potential) too. (db)
  *		Use "locally assigned" IEEE802 address space. (Brad Hards)
- * 18-oct-2002  Support for Zaurus (Pavel Machek), related cleanup (db).
+ * 18-oct-2002	Support for Zaurus (Pavel Machek), related cleanup (db).
+ * 14-dec-2002	Remove Zaurus-private crc32 code (Pavel); 2.5 oops fix,
+ * 		cleanups and stubbed PXA-250 support (db), fix for framing
+ * 		issues on Z, net1080, and gl620a (Toby Milne)
  *
  *-------------------------------------------------------------------------*/
 
@@ -150,7 +154,8 @@
 #define	CONFIG_USB_GENESYS
 #define	CONFIG_USB_NET1080
 #define	CONFIG_USB_PL2301
-#define	CONFIG_USB_SA1110
+// #define	CONFIG_USB_PXA
+#define	CONFIG_USB_SA1100
 #define	CONFIG_USB_ZAURUS
 
 
@@ -162,6 +167,8 @@
  * Nineteen USB 1.1 max size bulk transactions per frame (ms), max.
  * Several dozen bytes of IPv4 data can fit in two such transactions.
  * One maximum size Ethernet packet takes twenty four of them.
+ * For high speed, each frame comfortably fits almost 36 max size
+ * Ethernet packets (so queues should be bigger).
  */
 #ifdef REALLY_QUEUE
 #define	RX_QLEN		4
@@ -233,6 +240,7 @@ struct driver_info {
 	int		flags;
 #define FLAG_FRAMING_NC	0x0001		/* guard against device dropouts */ 
 #define FLAG_FRAMING_GL	0x0002		/* genelink batches packets */
+#define FLAG_FRAMING_Z	0x0004		/* zaurus adds a trailer */
 #define FLAG_NO_SETINT	0x0010		/* device can't set_interface() */
 
 	/* reset device ... can sleep */
@@ -287,6 +295,12 @@ MODULE_PARM_DESC (msg_level, "Initial message level (default = 1)");
 #define	RUN_CONTEXT (in_irq () ? "in_irq" \
 			: (in_interrupt () ? "in_interrupt" : "can sleep"))
 
+/* mostly for PDA style devices, which are always present */
+static int always_connected (struct usbnet *dev)
+{
+	return 0;
+}
+
 /*-------------------------------------------------------------------------*/
 
 #ifdef DEBUG
@@ -364,6 +378,7 @@ static const struct driver_info	belkin_info = {
 
 static const struct driver_info	epson2888_info = {
 	.description =	"Epson USB Device",
+	.check_connect = always_connected,
 
 	.in = 4, .out = 3,
 	.epsize = 64,
@@ -457,10 +472,12 @@ static void gl_interrupt_complete (struct urb *urb, struct pt_regs *regs)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __FUNCTION__, status);
+		dbg("%s - urb shutting down with status: %d",
+				__FUNCTION__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+		dbg("%s - nonzero urb status received: %d",
+				__FUNCTION__, urb->status);
 	}
 
 	status = usb_submit_urb (urb, GFP_ATOMIC);
@@ -1223,6 +1240,27 @@ static const struct driver_info	prolific_info = {
 #endif /* CONFIG_USB_PL2301 */
 
 
+
+#ifdef	CONFIG_USB_PXA
+
+/*-------------------------------------------------------------------------
+ *
+ * PXA250 and PXA210 use XScale cores (ARM v5TE) with better USB support,
+ * and different USB endpoint numbering than the SA1100 devices.
+ *
+ *-------------------------------------------------------------------------*/
+
+static const struct driver_info	pxa_info = {
+	.description =	"PXA-250 Linux Device",
+	.check_connect = always_connected,
+
+	.in = 1, .out = 2,
+	.epsize = 64,
+};
+
+#endif	/* CONFIG_USB_PXA */
+
+
 
 #ifdef	CONFIG_USB_SA1100
 
@@ -1230,16 +1268,17 @@ static const struct driver_info	prolific_info = {
  *
  * Intel's SA-1100 chip integrates basic USB support, and is used
  * in PDAs like some iPaqs, the Yopy, some Zaurus models, and more.
- * When they runs Linux, arch/arm/sa1100/usb-eth.c may be used to
+ * When they run Linux, arch/arm/mach-sa1100/usb-eth.c may be used to
  * network using minimal USB framing data.
  *
- * This describes the driver currently in www.handhelds.org kernels.
+ * This describes the driver currently in standard ARM Linux kernels.
  * The Zaurus uses a different driver (see later).
  *
  *-------------------------------------------------------------------------*/
 
 static const struct driver_info	linuxdev_info = {
 	.description =	"SA-1100 Linux Device",
+	.check_connect = always_connected,
 
 	.in = 2, .out = 1,
 	.epsize = 64,
@@ -1247,6 +1286,7 @@ static const struct driver_info	linuxdev_info = {
 
 static const struct driver_info	yopy_info = {
 	.description =	"Yopy",
+	.check_connect = always_connected,
 
 	.in = 2, .out = 1,
 	.epsize = 64,
@@ -1257,65 +1297,20 @@ static const struct driver_info	yopy_info = {
 
 #ifdef CONFIG_USB_ZAURUS
 
+#include <linux/crc32.h>
+
 /*-------------------------------------------------------------------------
  *
  * Zaurus is also a SA-1110 based PDA, but one using a different driver
- * for its USB slave/target controller than the case above.
+ * (and framing) for its USB slave/gadget controller than the case above.
  *
- * The key differences are that (a) it's got a msft-friendly configuration,
- * and (b) the linux-friendly framing adds a crc32 to cope with some
- * memory corruption observed with usb-to-memory DMA in some cases.
+ * For the current version of that driver, the main way that framing is
+ * nonstandard (also from perspective of the CDC ethernet model!) is a
+ * crc32, added to help detect when some sa1100 usb-to-memory DMA errata
+ * haven't been fully worked around.
  *
  *-------------------------------------------------------------------------*/
 
-static const u32 crc32_table [256] = {
-    0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
-    0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
-    0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
-    0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
-    0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
-    0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
-    0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
-    0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
-    0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
-    0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
-    0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
-    0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
-    0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
-    0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
-    0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
-    0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
-    0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
-    0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
-    0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
-    0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
-    0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
-    0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
-    0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
-    0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
-    0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
-    0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
-    0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
-    0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
-    0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
-    0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
-    0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
-    0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
-};
-
-#define CRC32_INITFCS     0xffffffff  // Initial FCS value 
-#define CRC32_FCS(fcs, c) (((fcs) >> 8) ^ crc32_table[((fcs) ^ (c)) & 0xff])
-
-/* fcs_compute32 - memcpy and calculate fcs
- * Perform a memcpy and calculate fcs using ppp 32bit CRC algorithm.
- */
-static inline u32 fcs_compute32 (unsigned char *sp, int len, u32 fcs)
-{
-	for (;len-- > 0; fcs = CRC32_FCS (fcs, *sp++))
-		continue;
-	return fcs;
-}
-
 static struct sk_buff *
 zaurus_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags)
 {
@@ -1334,11 +1329,9 @@ zaurus_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags)
 	if (skb) {
 		u32		fcs;
 done:
-		fcs = fcs_compute32 (skb->data, skb->len, CRC32_INITFCS);
+		fcs = crc32_le (~0, skb->data, skb->len);
 		fcs = ~fcs;
 
-		// ? add optional byte make addr even ?
-
 		*skb_put (skb, 1) = fcs       & 0xff;
 		*skb_put (skb, 1) = (fcs>> 8) & 0xff;
 		*skb_put (skb, 1) = (fcs>>16) & 0xff;
@@ -1349,6 +1342,8 @@ zaurus_tx_fixup (struct usbnet *dev, struct sk_buff *skb, int flags)
 
 static const struct driver_info	zaurus_sl5x00_info = {
 	.description =	"Sharp Zaurus SL-5x00",
+	.flags =	FLAG_FRAMING_Z,
+	.check_connect = always_connected,
 	.tx_fixup = 	zaurus_tx_fixup,
 
 	.in = 2, .out = 1,
@@ -1356,11 +1351,16 @@ static const struct driver_info	zaurus_sl5x00_info = {
 };
 static const struct driver_info	zaurus_sla300_info = {
 	.description =	"Sharp Zaurus SL-A300",
+	.flags =	FLAG_FRAMING_Z,
+	.check_connect = always_connected,
 	.tx_fixup = 	zaurus_tx_fixup,
 
 	.in = 1, .out = 2,
 	.epsize = 64,
 };
+
+// SL-5600 and C-700 are PXA based; should resemble A300
+
 #endif
 
 
@@ -1403,7 +1403,7 @@ static struct net_device_stats *usbnet_get_stats (struct net_device *net)
 
 /*-------------------------------------------------------------------------*/
 
-/* urb completions are currently in_irq; avoid doing real work then. */
+/* urb completions may be in_irq; avoid doing real work then. */
 
 static void defer_bh (struct usbnet *dev, struct sk_buff *skb)
 {
@@ -1456,6 +1456,11 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, int flags)
 	if (dev->driver_info->flags & FLAG_FRAMING_GL)
 		size = GL_RCV_BUF_SIZE;
 	else
+#endif
+#ifdef CONFIG_USB_ZAURUS
+	if (dev->driver_info->flags & FLAG_FRAMING_Z)
+		size = 6 + (sizeof (struct ethhdr) + dev->net.mtu);
+	else
 #endif
 		size = (sizeof (struct ethhdr) + dev->net.mtu);
 
@@ -1476,11 +1481,6 @@ static void rx_submit (struct usbnet *dev, struct urb *urb, int flags)
 		usb_rcvbulkpipe (dev->udev, dev->driver_info->in),
 		skb->data, size, rx_complete, skb);
 	urb->transfer_flags |= URB_ASYNC_UNLINK;
-#if 0
-	// Idle-but-posted reads with UHCI really chew up
-	// PCI bandwidth unless FSBR is disabled
-	urb->transfer_flags |= URB_NO_FSBR;
-#endif
 
 	spin_lock_irqsave (&dev->rxq.lock, lockflags);
 
@@ -1524,8 +1524,6 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 	if (skb->len) {
 		int	status;
 
-// FIXME: eth_copy_and_csum "small" packets to new SKB (small < ~200 bytes) ?
-
 		skb->dev = &dev->net;
 		skb->protocol = eth_type_trans (skb, &dev->net);
 		dev->stats.rx_packets++;
@@ -1904,7 +1902,7 @@ static void usbnet_tx_timeout (struct net_device *net)
 static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
 {
 	struct usbnet		*dev = (struct usbnet *) net->priv;
-	int			length = skb->len;
+	int			length;
 	int			retval = NET_XMIT_SUCCESS;
 	struct urb		*urb = 0;
 	struct skb_data		*entry;
@@ -1924,6 +1922,7 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
 			goto drop;
 		}
 	}
+	length = skb->len;
 
 	if (!(urb = usb_alloc_urb (0, GFP_ATOMIC))) {
 		dbg ("no urb");
@@ -1938,6 +1937,7 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
 
 	// FIXME: reorganize a bit, so that fixup() fills out NetChip
 	// framing too. (Packet ID update needs the spinlock...)
+	// [ BETTER:  we already own net->xmit_lock, that's enough ]
 
 #ifdef	CONFIG_USB_NET1080
 	if (info->flags & FLAG_FRAMING_NC) {
@@ -1958,7 +1958,6 @@ static int usbnet_start_xmit (struct sk_buff *skb, struct net_device *net)
 			usb_sndbulkpipe (dev->udev, info->out),
 			skb->data, skb->len, tx_complete, skb);
 	urb->transfer_flags |= URB_ASYNC_UNLINK;
-	// FIXME urb->timeout = ... jiffies ... ;
 
 	spin_lock_irqsave (&dev->txq.lock, flags);
 
@@ -2198,7 +2197,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 #endif
 
 	// ok, it's ready to go.
-	dev_set_drvdata (&udev->dev, net);
+	dev_set_drvdata (&udev->dev, dev);
 	mutex_lock (&usbnet_mutex);
 	list_add (&dev->dev_list, &usbnet_list);
 	mutex_unlock (&dev->mutex);
@@ -2280,15 +2279,28 @@ static const struct usb_device_id	products [] = {
 },
 #endif
 
+#ifdef	CONFIG_USB_PXA
+/*
+ * PXA250 or PXA210 ...  these use a "usb-eth" driver much like
+ * the sa1100 one.
+ */
+{
+	// Compaq "Itsy" vendor/product id, version "2.0"
+	USB_DEVICE_VER (0x049F, 0x505A, 0x0200, 0x0200),
+	.driver_info =	(unsigned long) &pxa_info,
+}, 
+#endif
+
 #ifdef	CONFIG_USB_SA1100
 /*
- * SA-1100 using www.handhelds.org kernels, or compatible.
+ * SA-1100 using standard ARM Linux kernels, or compatible.
  * Often used when talking to Linux PDAs (iPaq, Yopy, etc).
  * The sa-1100 "usb-eth" driver handles the basic framing.
  */
 {
 	// 1183 = 0x049F, both used as hex values?
-	USB_DEVICE (0x049F, 0x505A),	// iPaq: Compaq "Itsy"
+	// Compaq "Itsy" vendor/product id, version "0.0"
+	USB_DEVICE_VER (0x049F, 0x505A, 0, 0),
 	.driver_info =	(unsigned long) &linuxdev_info,
 }, {
 	USB_DEVICE (0x0E7E, 0x1001),	// G.Mate "Yopy"
@@ -2323,8 +2335,6 @@ static const struct usb_device_id	products [] = {
 },
 #endif
 
-/* KC2190 from www.sepoong.co.kr "InstaNET" */
-
 	{ },		// END
 };
 MODULE_DEVICE_TABLE (usb, products);

drivers/usb/serial/belkin_sa.c

@@ -126,6 +126,7 @@ static struct usb_driver belkin_driver = {
 static struct usb_serial_device_type belkin_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Belkin / Peracom / GoHubs USB Serial Adapter",
+	.short_name =		"belkin",
 	.id_table =		id_table_combined,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/bus.c

@@ -121,7 +121,10 @@ int usb_serial_bus_register(struct usb_serial_device_type *device)
 {
 	int retval;
 
-	device->driver.name = (char *)device->name;
+	if (device->short_name)
+		device->driver.name = (char *)device->short_name;
+	else
+		device->driver.name = (char *)device->name;
 	device->driver.bus = &usb_serial_bus_type;
 	device->driver.probe = usb_serial_device_probe;
 	device->driver.remove = usb_serial_device_remove;

drivers/usb/serial/cyberjack.c

@@ -83,6 +83,7 @@ static struct usb_driver cyberjack_driver = {
 static struct usb_serial_device_type cyberjack_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Reiner SCT Cyberjack USB card reader",
+	.short_name =		"cyberjack",
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/generic.c

@@ -43,6 +43,7 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 struct usb_serial_device_type usb_serial_generic_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Generic",
+	.short_name =		"generic",
 	.id_table =		generic_device_ids,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,

drivers/usb/serial/io_tables.h

@@ -100,6 +100,7 @@ MODULE_DEVICE_TABLE (usb, id_table_combined);
 static struct usb_serial_device_type edgeport_1port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 1 port adapter",
+	.short_name		= "edgeport_1",
 	.id_table		= edgeport_1port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -122,6 +123,7 @@ static struct usb_serial_device_type edgeport_1port_device = {
 static struct usb_serial_device_type edgeport_2port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 2 port adapter",
+	.short_name		= "edgeport_2",
 	.id_table		= edgeport_2port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -144,6 +146,7 @@ static struct usb_serial_device_type edgeport_2port_device = {
 static struct usb_serial_device_type edgeport_4port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 4 port adapter",
+	.short_name		= "edgeport_4",
 	.id_table		= edgeport_4port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -166,6 +169,7 @@ static struct usb_serial_device_type edgeport_4port_device = {
 static struct usb_serial_device_type edgeport_8port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport 8 port adapter",
+	.short_name		= "edgeport_8",
 	.id_table		= edgeport_8port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,

drivers/usb/serial/io_ti.c

@@ -2635,6 +2635,7 @@ static void edge_shutdown (struct usb_serial *serial)
 static struct usb_serial_device_type edgeport_1port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport TI 1 port adapter",
+	.short_name		= "edgeport_ti_1",
 	.id_table		= edgeport_1port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 1,
@@ -2657,6 +2658,7 @@ static struct usb_serial_device_type edgeport_1port_device = {
 static struct usb_serial_device_type edgeport_2port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Edgeport TI 2 port adapter",
+	.short_name		= "edgeport_ti_2",
 	.id_table		= edgeport_2port_id_table,
 	.num_interrupt_in	= 1,
 	.num_bulk_in		= 2,

drivers/usb/serial/keyspan.h

@@ -481,6 +481,7 @@ static struct usb_device_id keyspan_4port_ids[] = {
 static struct usb_serial_device_type keyspan_pre_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan - (without firmware)",
+	.short_name		= "keyspan_no_firm",
 	.id_table		= keyspan_pre_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -492,6 +493,7 @@ static struct usb_serial_device_type keyspan_pre_device = {
 static struct usb_serial_device_type keyspan_1port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan 1 port adapter",
+	.short_name		= "keyspan_1",
 	.id_table		= keyspan_1port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= 3,
@@ -514,6 +516,7 @@ static struct usb_serial_device_type keyspan_1port_device = {
 static struct usb_serial_device_type keyspan_2port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan 2 port adapter",
+	.short_name		= "keyspan_2",
 	.id_table		= keyspan_2port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= NUM_DONT_CARE,
@@ -536,6 +539,7 @@ static struct usb_serial_device_type keyspan_2port_device = {
 static struct usb_serial_device_type keyspan_4port_device = {
 	.owner			= THIS_MODULE,
 	.name			= "Keyspan 4 port adapter",
+	.short_name		= "keyspan_4",
 	.id_table		= keyspan_4port_ids,
 	.num_interrupt_in	= NUM_DONT_CARE,
 	.num_bulk_in		= 5,

drivers/usb/serial/keyspan_pda.c

@@ -827,6 +827,7 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
 static struct usb_serial_device_type keyspan_pda_fake_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Keyspan PDA - (prerenumeration)",
+	.short_name =		"kyspn_pda_nofirm",
 	.id_table =		id_table_fake,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -840,6 +841,7 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
 static struct usb_serial_device_type xircom_pgs_fake_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Xircom / Entregra PGS - (prerenumeration)",
+	.short_name =		"xircom_nofirm",
 	.id_table =		id_table_fake_xircom,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -852,6 +854,7 @@ static struct usb_serial_device_type xircom_pgs_fake_device = {
 static struct usb_serial_device_type keyspan_pda_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Keyspan PDA",
+	.short_name =		"keyspan_pda",
 	.id_table =		id_table_std,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		0,

drivers/usb/serial/kl5kusb105.c

@@ -127,6 +127,7 @@ static struct usb_driver kl5kusb105d_driver = {
 static struct usb_serial_device_type kl5kusb105d_device = {
 	.owner =             THIS_MODULE,
 	.name =		     "KL5KUSB105D / PalmConnect",
+	.short_name =	     "kl5kusb105d",
 	.id_table =	     id_table,
 	.num_interrupt_in =  1,
 	.num_bulk_in =	     1,

drivers/usb/serial/mct_u232.c

@@ -149,6 +149,7 @@ static struct usb_driver mct_u232_driver = {
 static struct usb_serial_device_type mct_u232_device = {
 	.owner =	     THIS_MODULE,
 	.name =		     "Magic Control Technology USB-RS232",
+	.short_name =	     "mct_u232",
 	.id_table =	     id_table_combined,
 	.num_interrupt_in =  2,
 	.num_bulk_in =	     0,

drivers/usb/serial/omninet.c

@@ -94,6 +94,7 @@ static struct usb_driver omninet_driver = {
 static struct usb_serial_device_type zyxel_omninet_device = {
 	.owner =		THIS_MODULE,
 	.name =			"ZyXEL - omni.net lcd plus usb",
+	.short_name =		"omninet",
 	.id_table =		id_table,
 	.num_interrupt_in =	1,
 	.num_bulk_in =		1,

drivers/usb/serial/usb-serial.h

@@ -168,6 +168,9 @@ struct usb_serial {
  * @owner: pointer to the module that owns this device.
  * @name: pointer to a string that describes this device.  This string used
  *	in the syslog messages when a device is inserted or removed.
+ * @short_name: a pointer to a string that describes this device in
+ *	KOBJ_NAME_LEN characters or less.  This is used for the sysfs interface
+ *	to describe the driver.
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
  * @num_interrupt_in: the number of interrupt in endpoints this device will
@@ -201,6 +204,7 @@ struct usb_serial {
 struct usb_serial_device_type {
 	struct module *owner;
 	char	*name;
+	char	*short_name;
 	const struct usb_device_id *id_table;
 	char	num_interrupt_in;
 	char	num_bulk_in;

drivers/usb/serial/visor.c

@@ -236,6 +236,7 @@ static struct usb_driver visor_driver = {
 static struct usb_serial_device_type handspring_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Handspring Visor / Treo / Palm 4.0 / Clié 4.x",
+	.short_name =		"visor",
 	.id_table =		id_table,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		2,
@@ -262,6 +263,7 @@ static struct usb_serial_device_type handspring_device = {
 static struct usb_serial_device_type clie_3_5_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Sony Clié 3.5",
+	.short_name =		"clie_3.5",
 	.id_table =		clie_id_3_5_table,
 	.num_interrupt_in =	0,
 	.num_bulk_in =		1,

drivers/usb/serial/whiteheat.c

@@ -156,6 +156,7 @@ static void whiteheat_write_callback	(struct urb *urb, struct pt_regs *regs);
 static struct usb_serial_device_type whiteheat_fake_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Connect Tech - WhiteHEAT - (prerenumeration)",
+	.short_name =		"whiteheatnofirm",
 	.id_table =		id_table_prerenumeration,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -168,6 +169,7 @@ static struct usb_serial_device_type whiteheat_fake_device = {
 static struct usb_serial_device_type whiteheat_device = {
 	.owner =		THIS_MODULE,
 	.name =			"Connect Tech - WhiteHEAT",
+	.short_name =		"whiteheat",
 	.id_table =		id_table_std,
 	.num_interrupt_in =	NUM_DONT_CARE,
 	.num_bulk_in =		NUM_DONT_CARE,
@@ -512,9 +514,11 @@ static int whiteheat_attach (struct usb_serial *serial)
 no_rx_buf:
 			usb_free_urb(urb);
 no_rx_urb:
+			;
 		}
 		kfree(info);
 no_private:
+		;
 	}
 	return -ENOMEM;
 }

drivers/usb/storage/transport.c

@@ -480,7 +480,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe,
 	status = usb_stor_msg_common(us);
 
 	/* return the actual length of the data transferred if no error */
-	if (status >= 0)
+	if (status == 0)
 		status = us->current_urb->actual_length;
 	return status;
 }
@@ -583,50 +583,52 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe,
 
 	US_DEBUGP("Status code %d; transferred %u/%u\n",
 			result, partial, length);
+	switch (result) {
 
-	/* stalled */
-	if (result == -EPIPE) {
+	/* no error code; did we send all the data? */
+	case 0:
+		if (partial != length) {
+			US_DEBUGP("-- short transfer\n");
+			return USB_STOR_XFER_SHORT;
+		}
+
+		US_DEBUGP("-- transfer complete\n");
+		return USB_STOR_XFER_GOOD;
 
-		/* for non-bulk (i.e., control) endpoints, a stall indicates
-		 * a protocol error */
-		if (!usb_pipebulk(pipe)) {
+	/* stalled */
+	case -EPIPE:
+		/* for control endpoints, a stall indicates a protocol error */
+		if (usb_pipecontrol(pipe)) {
 			US_DEBUGP("-- stall on control pipe\n");
 			return USB_STOR_XFER_ERROR;
 		}
 
-		/* for a bulk endpoint, clear the stall */
+		/* for other sorts of endpoint, clear the stall */
 		US_DEBUGP("clearing endpoint halt for pipe 0x%x\n", pipe);
 		if (usb_stor_clear_halt(us, pipe) < 0)
 			return USB_STOR_XFER_ERROR;
 		return USB_STOR_XFER_STALLED;
-	}
 
 	/* NAK - that means we've retried this a few times already */
-	if (result == -ETIMEDOUT) {
+	case -ETIMEDOUT:
 		US_DEBUGP("-- device NAKed\n");
 		return USB_STOR_XFER_ERROR;
-	}
 
 	/* the transfer was cancelled, presumably by an abort */
-	if (result == -ENODEV) {
+	case -ENODEV:
 		US_DEBUGP("-- transfer cancelled\n");
 		return USB_STOR_XFER_ERROR;
-	}
+
+	/* short scatter-gather read transfer */
+	case -EREMOTEIO:
+		US_DEBUGP("-- short read transfer\n");
+		return USB_STOR_XFER_SHORT;
 
 	/* the catch-all error case */
-	if (result < 0) {
+	default:
 		US_DEBUGP("-- unknown error\n");
 		return USB_STOR_XFER_ERROR;
 	}
-
-	/* no error code; did we send all the data? */
-	if (partial != length) {
-		US_DEBUGP("-- transferred only %u bytes\n", partial);
-		return USB_STOR_XFER_SHORT;
-	}
-
-	US_DEBUGP("-- transfer complete\n");
-	return USB_STOR_XFER_GOOD;
 }
 
 /*

drivers/usb/storage/usb.c

@@ -728,9 +728,13 @@ static int storage_probe(struct usb_interface *intf,
 			USB_ENDPOINT_NUMBER_MASK;
 		ss->ep_out = ep_out->bEndpointAddress & 
 			USB_ENDPOINT_NUMBER_MASK;
-		ss->ep_int = ep_int->bEndpointAddress & 
-			USB_ENDPOINT_NUMBER_MASK;
-		ss->ep_bInterval = ep_int->bInterval;
+		if (ep_int) {
+			ss->ep_int = ep_int->bEndpointAddress & 
+				USB_ENDPOINT_NUMBER_MASK;
+			ss->ep_bInterval = ep_int->bInterval;
+		}
+		else
+			ss->ep_int = ss->ep_bInterval = 0;
 
 		/* allocate the URB, the usb_ctrlrequest, and the IRQ URB */
 		if (usb_stor_allocate_urbs(ss))
@@ -771,9 +775,13 @@ static int storage_probe(struct usb_interface *intf,
 			USB_ENDPOINT_NUMBER_MASK;
 		ss->ep_out = ep_out->bEndpointAddress & 
 			USB_ENDPOINT_NUMBER_MASK;
-		ss->ep_int = ep_int->bEndpointAddress & 
-			USB_ENDPOINT_NUMBER_MASK;
-		ss->ep_bInterval = ep_int->bInterval;
+		if (ep_int) {
+			ss->ep_int = ep_int->bEndpointAddress & 
+				USB_ENDPOINT_NUMBER_MASK;
+			ss->ep_bInterval = ep_int->bInterval;
+		}
+		else
+			ss->ep_int = ss->ep_bInterval = 0;
 
 		/* establish the connection to the new device */
 		ss->ifnum = ifnum;