From 6df516905b5c53b306d90be33f9c56434e8db053 Mon Sep 17 00:00:00 2001 From: Steven Toth <stoth@hauppauge.com> Date: Mon, 30 Jun 2008 22:17:05 -0300 Subject: [PATCH] V4L/DVB (8470): cx23885: Add DViCO HDTV7 Dual Express tuner callback support. Ensure the correct tuner gets reset on demand. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- drivers/media/video/cx23885/cx23885-cards.c | 40 ++++++++++++++------- 1 file changed, 28 insertions(+), 12 deletions(-) diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c index 691b35279c20..a19de850955d 100644 --- a/drivers/media/video/cx23885/cx23885-cards.c +++ b/drivers/media/video/cx23885/cx23885-cards.c @@ -326,25 +326,41 @@ int cx23885_tuner_callback(void *priv, int command, int arg) { struct cx23885_i2c *bus = priv; struct cx23885_dev *dev = bus->dev; + u32 bitmask = 0; + + if (command != 0) { + printk(KERN_ERR "%s(): Unknown command 0x%x.\n", + __func__, command); + return -EINVAL; + } switch(dev->board) { case CX23885_BOARD_HAUPPAUGE_HVR1500Q: - if(command == 0) { /* Tuner Reset Command from xc5000 */ - /* Drive the tuner into reset and out */ - cx_clear(GP0_IO, 0x00000004); - mdelay(200); - cx_set(GP0_IO, 0x00000004); - return 0; - } - else { - printk(KERN_ERR - "%s(): Unknow command.\n", __func__); - return -EINVAL; + /* Tuner Reset Command from xc5000 */ + if (command == 0) + bitmask = 0x04; + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + if (command == 0) { + + /* Two identical tuners on two different i2c buses, + * we need to reset the correct gpio. */ + if (bus->nr == 0) + bitmask = 0x01; + else if (bus->nr == 1) + bitmask = 0x04; } break; } - return 0; /* Should never be here */ + if (bitmask) { + /* Drive the tuner into reset and back out */ + cx_clear(GP0_IO, bitmask); + mdelay(200); + cx_set(GP0_IO, bitmask); + } + + return 0; } void cx23885_gpio_setup(struct cx23885_dev *dev) -- 2.30.9