Skip to content

L
linux
Commit 6ea4383b authored by Heiko Stuebner's avatar Heiko Stuebner Committed by Sam Ravnborg
Browse files
Options

drm/panel: add panel driver for Leadtek LTK050H3146W 

The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.

They differ in their init sequence and mode details.

changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam
Signed-off-by: default avatarHeiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de
parent 17434fba
Show whitespace changes
Inline Side-by-side
Showing with 703 additions and 0 deletions
drivers/gpu/drm/panel/Kconfig
View file @ 6ea4383b
......@@ -137,6 +137,17 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_LEADTEK_LTK050H3146W
tristate "Leadtek LTK050H3146W panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Leadtek LTK050H3146W
TFT-LCD modules. The panel has a 720x1280 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_LEADTEK_LTK500HD1829
tristate "Leadtek LTK500HD1829 panel"
depends on OF
......
drivers/gpu/drm/panel/Makefile
View file @ 6ea4383b
......@@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
......
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c 0 → 100644
View file @ 6ea4383b
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 Theobroma Systems Design und Consulting GmbH
*/
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/media-bus-format.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/regulator/consumer.h>
#include <video/display_timing.h>
#include <video/mipi_display.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
#include <drm/drm_print.h>
struct ltk050h3146w_cmd {
char cmd;
char data;
};
struct ltk050h3146w;
struct ltk050h3146w_desc {
const struct drm_display_mode *mode;
int (*init)(struct ltk050h3146w *ctx);
};
struct ltk050h3146w {
struct device *dev;
struct drm_panel panel;
struct gpio_desc *reset_gpio;
struct regulator *vci;
struct regulator *iovcc;
const struct ltk050h3146w_desc *panel_desc;
bool prepared;
};
static const struct ltk050h3146w_cmd page1_cmds[] = {
{ 0x22, 0x0A }, /* BGR SS GS */
{ 0x31, 0x00 }, /* column inversion */
{ 0x53, 0xA2 }, /* VCOM1 */
{ 0x55, 0xA2 }, /* VCOM2 */
{ 0x50, 0x81 }, /* VREG1OUT=5V */
{ 0x51, 0x85 }, /* VREG2OUT=-5V */
{ 0x62, 0x0D }, /* EQT Time setting */
/*
* The vendor init selected page 1 here _again_
* Is this supposed to be page 2?
*/
{ 0xA0, 0x00 },
{ 0xA1, 0x1A },
{ 0xA2, 0x28 },
{ 0xA3, 0x13 },
{ 0xA4, 0x16 },
{ 0xA5, 0x29 },
{ 0xA6, 0x1D },
{ 0xA7, 0x1E },
{ 0xA8, 0x84 },
{ 0xA9, 0x1C },
{ 0xAA, 0x28 },
{ 0xAB, 0x75 },
{ 0xAC, 0x1A },
{ 0xAD, 0x19 },
{ 0xAE, 0x4D },
{ 0xAF, 0x22 },
{ 0xB0, 0x28 },
{ 0xB1, 0x54 },
{ 0xB2, 0x66 },
{ 0xB3, 0x39 },
{ 0xC0, 0x00 },
{ 0xC1, 0x1A },
{ 0xC2, 0x28 },
{ 0xC3, 0x13 },
{ 0xC4, 0x16 },
{ 0xC5, 0x29 },
{ 0xC6, 0x1D },
{ 0xC7, 0x1E },
{ 0xC8, 0x84 },
{ 0xC9, 0x1C },
{ 0xCA, 0x28 },
{ 0xCB, 0x75 },
{ 0xCC, 0x1A },
{ 0xCD, 0x19 },
{ 0xCE, 0x4D },
{ 0xCF, 0x22 },
{ 0xD0, 0x28 },
{ 0xD1, 0x54 },
{ 0xD2, 0x66 },
{ 0xD3, 0x39 },
};
static const struct ltk050h3146w_cmd page3_cmds[] = {
{ 0x01, 0x00 },
{ 0x02, 0x00 },
{ 0x03, 0x73 },
{ 0x04, 0x00 },
{ 0x05, 0x00 },
{ 0x06, 0x0a },
{ 0x07, 0x00 },
{ 0x08, 0x00 },
{ 0x09, 0x01 },
{ 0x0a, 0x00 },
{ 0x0b, 0x00 },
{ 0x0c, 0x01 },
{ 0x0d, 0x00 },
{ 0x0e, 0x00 },
{ 0x0f, 0x1d },
{ 0x10, 0x1d },
{ 0x11, 0x00 },
{ 0x12, 0x00 },
{ 0x13, 0x00 },
{ 0x14, 0x00 },
{ 0x15, 0x00 },
{ 0x16, 0x00 },
{ 0x17, 0x00 },
{ 0x18, 0x00 },
{ 0x19, 0x00 },
{ 0x1a, 0x00 },
{ 0x1b, 0x00 },
{ 0x1c, 0x00 },
{ 0x1d, 0x00 },
{ 0x1e, 0x40 },
{ 0x1f, 0x80 },
{ 0x20, 0x06 },
{ 0x21, 0x02 },
{ 0x22, 0x00 },
{ 0x23, 0x00 },
{ 0x24, 0x00 },
{ 0x25, 0x00 },
{ 0x26, 0x00 },
{ 0x27, 0x00 },
{ 0x28, 0x33 },
{ 0x29, 0x03 },
{ 0x2a, 0x00 },
{ 0x2b, 0x00 },
{ 0x2c, 0x00 },
{ 0x2d, 0x00 },
{ 0x2e, 0x00 },
{ 0x2f, 0x00 },
{ 0x30, 0x00 },
{ 0x31, 0x00 },
{ 0x32, 0x00 },
{ 0x33, 0x00 },
{ 0x34, 0x04 },
{ 0x35, 0x00 },
{ 0x36, 0x00 },
{ 0x37, 0x00 },
{ 0x38, 0x3C },
{ 0x39, 0x35 },
{ 0x3A, 0x01 },
{ 0x3B, 0x40 },
{ 0x3C, 0x00 },
{ 0x3D, 0x01 },
{ 0x3E, 0x00 },
{ 0x3F, 0x00 },
{ 0x40, 0x00 },
{ 0x41, 0x88 },
{ 0x42, 0x00 },
{ 0x43, 0x00 },
{ 0x44, 0x1F },
{ 0x50, 0x01 },
{ 0x51, 0x23 },
{ 0x52, 0x45 },
{ 0x53, 0x67 },
{ 0x54, 0x89 },
{ 0x55, 0xab },
{ 0x56, 0x01 },
{ 0x57, 0x23 },
{ 0x58, 0x45 },
{ 0x59, 0x67 },
{ 0x5a, 0x89 },
{ 0x5b, 0xab },
{ 0x5c, 0xcd },
{ 0x5d, 0xef },
{ 0x5e, 0x11 },
{ 0x5f, 0x01 },
{ 0x60, 0x00 },
{ 0x61, 0x15 },
{ 0x62, 0x14 },
{ 0x63, 0x0E },
{ 0x64, 0x0F },
{ 0x65, 0x0C },
{ 0x66, 0x0D },
{ 0x67, 0x06 },
{ 0x68, 0x02 },
{ 0x69, 0x07 },
{ 0x6a, 0x02 },
{ 0x6b, 0x02 },
{ 0x6c, 0x02 },
{ 0x6d, 0x02 },
{ 0x6e, 0x02 },
{ 0x6f, 0x02 },
{ 0x70, 0x02 },
{ 0x71, 0x02 },
{ 0x72, 0x02 },
{ 0x73, 0x02 },
{ 0x74, 0x02 },
{ 0x75, 0x01 },
{ 0x76, 0x00 },
{ 0x77, 0x14 },
{ 0x78, 0x15 },
{ 0x79, 0x0E },
{ 0x7a, 0x0F },
{ 0x7b, 0x0C },
{ 0x7c, 0x0D },
{ 0x7d, 0x06 },
{ 0x7e, 0x02 },
{ 0x7f, 0x07 },
{ 0x80, 0x02 },
{ 0x81, 0x02 },
{ 0x82, 0x02 },
{ 0x83, 0x02 },
{ 0x84, 0x02 },
{ 0x85, 0x02 },
{ 0x86, 0x02 },
{ 0x87, 0x02 },
{ 0x88, 0x02 },
{ 0x89, 0x02 },
{ 0x8A, 0x02 },
};
static const struct ltk050h3146w_cmd page4_cmds[] = {
{ 0x70, 0x00 },
{ 0x71, 0x00 },
{ 0x82, 0x0F }, /* VGH_MOD clamp level=15v */
{ 0x84, 0x0F }, /* VGH clamp level 15V */
{ 0x85, 0x0D }, /* VGL clamp level (-10V) */
{ 0x32, 0xAC },
{ 0x8C, 0x80 },
{ 0x3C, 0xF5 },
{ 0xB5, 0x07 }, /* GAMMA OP */
{ 0x31, 0x45 }, /* SOURCE OP */
{ 0x3A, 0x24 }, /* PS_EN OFF */
{ 0x88, 0x33 }, /* LVD */
};
static inline
struct ltk050h3146w *panel_to_ltk050h3146w(struct drm_panel *panel)
{
return container_of(panel, struct ltk050h3146w, panel);
}
#define dsi_dcs_write_seq(dsi, cmd, seq...) do { \
static const u8 d[] = { seq }; \
int ret; \
ret = mipi_dsi_dcs_write(dsi, cmd, d, ARRAY_SIZE(d)); \
if (ret < 0) \
return ret; \
} while (0)
static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
/*
* Init sequence was supplied by the panel vendor without much
* documentation.
*/
dsi_dcs_write_seq(dsi, 0xdf, 0x93, 0x65, 0xf8);
dsi_dcs_write_seq(dsi, 0xb0, 0x01, 0x03, 0x02, 0x00, 0x64, 0x06,
0x01);
dsi_dcs_write_seq(dsi, 0xb2, 0x00, 0xb5);
dsi_dcs_write_seq(dsi, 0xb3, 0x00, 0xb5);
dsi_dcs_write_seq(dsi, 0xb7, 0x00, 0xbf, 0x00, 0x00, 0xbf, 0x00);
dsi_dcs_write_seq(dsi, 0xb9, 0x00, 0xc4, 0x23, 0x07);
dsi_dcs_write_seq(dsi, 0xbb, 0x02, 0x01, 0x24, 0x00, 0x28, 0x0f,
0x28, 0x04, 0xcc, 0xcc, 0xcc);
dsi_dcs_write_seq(dsi, 0xbc, 0x0f, 0x04);
dsi_dcs_write_seq(dsi, 0xbe, 0x1e, 0xf2);
dsi_dcs_write_seq(dsi, 0xc0, 0x26, 0x03);
dsi_dcs_write_seq(dsi, 0xc1, 0x00, 0x12);
dsi_dcs_write_seq(dsi, 0xc3, 0x04, 0x02, 0x02, 0x76, 0x01, 0x80,
0x80);
dsi_dcs_write_seq(dsi, 0xc4, 0x24, 0x80, 0xb4, 0x81, 0x12, 0x0f,
0x16, 0x00, 0x00);
dsi_dcs_write_seq(dsi, 0xc8, 0x7f, 0x72, 0x67, 0x5d, 0x5d, 0x50,
0x56, 0x41, 0x59, 0x57, 0x55, 0x70, 0x5b, 0x5f,
0x4f, 0x47, 0x38, 0x23, 0x08, 0x7f, 0x72, 0x67,
0x5d, 0x5d, 0x50, 0x56, 0x41, 0x59, 0x57, 0x55,
0x70, 0x5b, 0x5f, 0x4f, 0x47, 0x38, 0x23, 0x08);
dsi_dcs_write_seq(dsi, 0xd0, 0x1e, 0x1f, 0x57, 0x58, 0x48, 0x4a,
0x44, 0x46, 0x40, 0x1f, 0x42, 0x1f, 0x1f, 0x1f,
0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
dsi_dcs_write_seq(dsi, 0xd1, 0x1e, 0x1f, 0x57, 0x58, 0x49, 0x4b,
0x45, 0x47, 0x41, 0x1f, 0x43, 0x1f, 0x1f, 0x1f,
0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
dsi_dcs_write_seq(dsi, 0xd2, 0x1f, 0x1e, 0x17, 0x18, 0x07, 0x05,
0x0b, 0x09, 0x03, 0x1f, 0x01, 0x1f, 0x1f, 0x1f,
0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
dsi_dcs_write_seq(dsi, 0xd3, 0x1f, 0x1e, 0x17, 0x18, 0x06, 0x04,
0x0a, 0x08, 0x02, 0x1f, 0x00, 0x1f, 0x1f, 0x1f,
0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f, 0x1f);
dsi_dcs_write_seq(dsi, 0xd4, 0x00, 0x00, 0x00, 0x0c, 0x06, 0x20,
0x01, 0x02, 0x00, 0x60, 0x15, 0xb0, 0x30, 0x03,
0x04, 0x00, 0x60, 0x72, 0x0a, 0x00, 0x60, 0x08);
dsi_dcs_write_seq(dsi, 0xd5, 0x00, 0x06, 0x06, 0x00, 0x30, 0x00,
0x00, 0x00, 0x00, 0x00, 0xbc, 0x50, 0x00, 0x05,
0x21, 0x00, 0x60);
dsi_dcs_write_seq(dsi, 0xdd, 0x2c, 0xa3, 0x00);
dsi_dcs_write_seq(dsi, 0xde, 0x02);
dsi_dcs_write_seq(dsi, 0xb2, 0x32, 0x1c);
dsi_dcs_write_seq(dsi, 0xb7, 0x3b, 0x70, 0x00, 0x04);
dsi_dcs_write_seq(dsi, 0xc1, 0x11);
dsi_dcs_write_seq(dsi, 0xbb, 0x21, 0x22, 0x23, 0x24, 0x36, 0x37);
dsi_dcs_write_seq(dsi, 0xc2, 0x20, 0x38, 0x1e, 0x84);
dsi_dcs_write_seq(dsi, 0xde, 0x00);
ret = mipi_dsi_dcs_set_tear_on(dsi, 1);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
ret);
return ret;
}
msleep(60);
return 0;
}
static const struct drm_display_mode ltk050h3146w_mode = {
.hdisplay = 720,
.hsync_start = 720 + 42,
.hsync_end = 720 + 42 + 8,
.htotal = 720 + 42 + 8 + 42,
.vdisplay = 1280,
.vsync_start = 1280 + 12,
.vsync_end = 1280 + 12 + 4,
.vtotal = 1280 + 12 + 4 + 18,
.clock = 64018,
.width_mm = 62,
.height_mm = 110,
};
static const struct ltk050h3146w_desc ltk050h3146w_data = {
.mode = &ltk050h3146w_mode,
.init = ltk050h3146w_init_sequence,
};
static int ltk050h3146w_a2_select_page(struct ltk050h3146w *ctx, int page)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
u8 d[3] = { 0x98, 0x81, page };
return mipi_dsi_dcs_write(dsi, 0xff, d, ARRAY_SIZE(d));
}
static int ltk050h3146w_a2_write_page(struct ltk050h3146w *ctx, int page,
const struct ltk050h3146w_cmd *cmds,
int num)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int i, ret;
ret = ltk050h3146w_a2_select_page(ctx, page);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "failed to select page %d: %d\n",
page, ret);
return ret;
}
for (i = 0; i < num; i++) {
ret = mipi_dsi_generic_write(dsi, &cmds[i],
sizeof(struct ltk050h3146w_cmd));
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev,
"failed to write page %d init cmds: %d\n",
page, ret);
return ret;
}
}
return 0;
}
static int ltk050h3146w_a2_init_sequence(struct ltk050h3146w *ctx)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
/*
* Init sequence was supplied by the panel vendor without much
* documentation.
*/
ret = ltk050h3146w_a2_write_page(ctx, 3, page3_cmds,
ARRAY_SIZE(page3_cmds));
if (ret < 0)
return ret;
ret = ltk050h3146w_a2_write_page(ctx, 4, page4_cmds,
ARRAY_SIZE(page4_cmds));
if (ret < 0)
return ret;
ret = ltk050h3146w_a2_write_page(ctx, 1, page1_cmds,
ARRAY_SIZE(page1_cmds));
if (ret < 0)
return ret;
ret = ltk050h3146w_a2_select_page(ctx, 0);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "failed to select page 0: %d\n", ret);
return ret;
}
/* vendor code called this without param, where there should be one */
ret = mipi_dsi_dcs_set_tear_on(dsi, 0);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
ret);
return ret;
}
msleep(60);
return 0;
}
static const struct drm_display_mode ltk050h3146w_a2_mode = {
.hdisplay = 720,
.hsync_start = 720 + 42,
.hsync_end = 720 + 42 + 10,
.htotal = 720 + 42 + 10 + 60,
.vdisplay = 1280,
.vsync_start = 1280 + 18,
.vsync_end = 1280 + 18 + 4,
.vtotal = 1280 + 18 + 4 + 12,
.clock = 65595,
.width_mm = 62,
.height_mm = 110,
};
static const struct ltk050h3146w_desc ltk050h3146w_a2_data = {
.mode = &ltk050h3146w_a2_mode,
.init = ltk050h3146w_a2_init_sequence,
};
static int ltk050h3146w_unprepare(struct drm_panel *panel)
{
struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
if (!ctx->prepared)
return 0;
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
ret);
return ret;
}
mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
ret);
return ret;
}
regulator_disable(ctx->iovcc);
regulator_disable(ctx->vci);
ctx->prepared = false;
return 0;
}
static int ltk050h3146w_prepare(struct drm_panel *panel)
{
struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
int ret;
if (ctx->prepared)
return 0;
DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
ret = regulator_enable(ctx->vci);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev,
"Failed to enable vci supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev,
"Failed to enable iovcc supply: %d\n", ret);
goto disable_vci;
}
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
usleep_range(5000, 6000);
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
msleep(20);
ret = ctx->panel_desc->init(ctx);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
ret);
goto disable_iovcc;
}
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
/* T9: 120ms */
msleep(120);
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
goto disable_iovcc;
}
msleep(50);
ctx->prepared = true;
return 0;
disable_iovcc:
regulator_disable(ctx->iovcc);
disable_vci:
regulator_disable(ctx->vci);
return ret;
}
static int ltk050h3146w_get_modes(struct drm_panel *panel,
struct drm_connector *connector)
{
struct ltk050h3146w *ctx = panel_to_ltk050h3146w(panel);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, ctx->panel_desc->mode);
if (!mode)
return -ENOMEM;
drm_mode_set_name(mode);
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
drm_mode_probed_add(connector, mode);
return 1;
}
static const struct drm_panel_funcs ltk050h3146w_funcs = {
.unprepare = ltk050h3146w_unprepare,
.prepare = ltk050h3146w_prepare,
.get_modes = ltk050h3146w_get_modes,
};
static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
{
struct device *dev = &dsi->dev;
struct ltk050h3146w *ctx;
int ret;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->panel_desc = of_device_get_match_data(dev);
if (!ctx->panel_desc)
return -EINVAL;
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
ctx->vci = devm_regulator_get(dev, "vci");
if (IS_ERR(ctx->vci)) {
ret = PTR_ERR(ctx->vci);
if (ret != -EPROBE_DEFER)
DRM_DEV_ERROR(dev,
"Failed to request vci regulator: %d\n",
ret);
return ret;
}
ctx->iovcc = devm_regulator_get(dev, "iovcc");
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
DRM_DEV_ERROR(dev,
"Failed to request iovcc regulator: %d\n",
ret);
return ret;
}
mipi_dsi_set_drvdata(dsi, ctx);
ctx->dev = dev;
dsi->lanes = 4;
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET;
drm_panel_init(&ctx->panel, &dsi->dev, &ltk050h3146w_funcs,
DRM_MODE_CONNECTOR_DSI);
ret = drm_panel_of_backlight(&ctx->panel);
if (ret)
return ret;
drm_panel_add(&ctx->panel);
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
return 0;
}
static void ltk050h3146w_shutdown(struct mipi_dsi_device *dsi)
{
struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
ret);
}
static int ltk050h3146w_remove(struct mipi_dsi_device *dsi)
{
struct ltk050h3146w *ctx = mipi_dsi_get_drvdata(dsi);
int ret;
ltk050h3146w_shutdown(dsi);
ret = mipi_dsi_detach(dsi);
if (ret < 0)
DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
ret);
drm_panel_remove(&ctx->panel);
return 0;
}
static const struct of_device_id ltk050h3146w_of_match[] = {
{
.compatible = "leadtek,ltk050h3146w",
.data = &ltk050h3146w_data,
},
{
.compatible = "leadtek,ltk050h3146w-a2",
.data = &ltk050h3146w_a2_data,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, ltk050h3146w_of_match);
static struct mipi_dsi_driver ltk050h3146w_driver = {
.driver = {
.name = "panel-leadtek-ltk050h3146w",
.of_match_table = ltk050h3146w_of_match,
},
.probe = ltk050h3146w_probe,
.remove = ltk050h3146w_remove,
.shutdown = ltk050h3146w_shutdown,
};
module_mipi_dsi_driver(ltk050h3146w_driver);
MODULE_AUTHOR("Heiko Stuebner <heiko.stuebner@theobroma-systems.com>");
MODULE_DESCRIPTION("DRM driver for Leadtek LTK050H3146W MIPI DSI panel");
MODULE_LICENSE("GPL v2");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7