Commit 6f85f738 authored by Lyude Paul's avatar Lyude Paul

drm/dp_mst: Add basic topology reprobing when resuming

Finally! For a very long time, our MST helpers have had one very
annoying issue: They don't know how to reprobe the topology state when
coming out of suspend. This means that if a user has a machine connected
to an MST topology and decides to suspend their machine, we lose all
topology changes that happened during that period. That can be a big
problem if the machine was connected to a different topology on the same
port before resuming, as we won't bother reprobing any of the ports and
likely cause the user's monitors not to come back up as expected.

So, we start fixing this by teaching our MST helpers how to reprobe the
link addresses of each connected topology when resuming. As it turns
out, the behavior that we want here is identical to the behavior we want
when initially probing a newly connected MST topology, with a couple of
important differences:

- We need to be more careful about handling the potential races between
  events from the MST hub that could change the topology state as we're
  performing the link address reprobe
- We need to be more careful about handling unlikely state changes on
  ports - such as an input port turning into an output port, something
  that would be far more likely to happen in situations like the MST hub
  we're connected to being changed while we're suspend

Both of which have been solved by previous commits. That leaves one
requirement:

- We need to prune any MST ports in our in-memory topology state that
  were present when suspending, but have not appeared in the post-resume
  link address response from their parent branch device

Which we can now handle in this commit by modifying
drm_dp_send_link_address(). We then introduce suspend/resume reprobing
by introducing drm_dp_mst_topology_mgr_invalidate_mstb(), which we call
in drm_dp_mst_topology_mgr_suspend() to traverse the in-memory topology
state to indicate that each mstb needs it's link address resent and PBN
resources reprobed.

On resume, we start back up &mgr->work and have it reprobe the topology
in the same way we would on a hotplug, removing any leftover ports that
no longer appear in the topology state.

Changes since v4:
* Split indenting changes in drm_dp_mst_topology_mgr_resume() into a
  separate patch
* Only fire hotplugs when something has actually changed after a link
  address probe
* Don't try to change port->connector at all on ports, just throw out
  ports that need their connectors removed to make things easier.

Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: default avatarSean Paul <sean@poorly.run>
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-14-lyude@redhat.com
parent d20ebea8
......@@ -974,7 +974,7 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
if (suspend) {
drm_dp_mst_topology_mgr_suspend(mgr);
} else {
ret = drm_dp_mst_topology_mgr_resume(mgr);
ret = drm_dp_mst_topology_mgr_resume(mgr, true);
if (ret < 0) {
drm_dp_mst_topology_mgr_set_mst(mgr, false);
need_hotplug = true;
......
......@@ -67,8 +67,8 @@ static int drm_dp_send_dpcd_write(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_port *port,
int offset, int size, u8 *bytes);
static void drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb);
static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb);
static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
struct drm_dp_mst_port *port);
......@@ -1977,7 +1977,7 @@ drm_dp_mst_add_port(struct drm_device *dev,
return port;
}
static void
static int
drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,
struct drm_device *dev,
struct drm_dp_link_addr_reply_port *port_msg)
......@@ -1986,33 +1986,45 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,
struct drm_dp_mst_port *port;
int old_ddps = 0, ret;
u8 new_pdt = DP_PEER_DEVICE_NONE;
bool created = false, send_link_addr = false;
bool created = false, send_link_addr = false, changed = false;
port = drm_dp_get_port(mstb, port_msg->port_number);
if (!port) {
port = drm_dp_mst_add_port(dev, mgr, mstb,
port_msg->port_number);
if (!port)
return;
return -ENOMEM;
created = true;
} else if (port_msg->input_port && !port->input && port->connector) {
/* Destroying the connector is impossible in this context, so
* replace the port with a new one
changed = true;
} else if (!port->input && port_msg->input_port && port->connector) {
/* Since port->connector can't be changed here, we create a
* new port if input_port changes from 0 to 1
*/
drm_dp_mst_topology_unlink_port(mgr, port);
drm_dp_mst_topology_put_port(port);
port = drm_dp_mst_add_port(dev, mgr, mstb,
port_msg->port_number);
if (!port)
return;
return -ENOMEM;
changed = true;
created = true;
} else {
/* Locking is only needed when the port has a connector
* exposed to userspace
} else if (port->input && !port_msg->input_port) {
changed = true;
} else if (port->connector) {
/* We're updating a port that's exposed to userspace, so do it
* under lock
*/
drm_modeset_lock(&mgr->base.lock, NULL);
old_ddps = port->ddps;
changed = port->ddps != port_msg->ddps ||
(port->ddps &&
(port->ldps != port_msg->legacy_device_plug_status ||
port->dpcd_rev != port_msg->dpcd_revision ||
port->mcs != port_msg->mcs ||
port->pdt != port_msg->peer_device_type ||
port->num_sdp_stream_sinks !=
port_msg->num_sdp_stream_sinks));
}
port->input = port_msg->input_port;
......@@ -2054,23 +2066,38 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,
goto fail;
}
if (!created)
/*
* If this port wasn't just created, then we're reprobing because
* we're coming out of suspend. In this case, always resend the link
* address if there's an MSTB on this port
*/
if (!created && port->pdt == DP_PEER_DEVICE_MST_BRANCHING)
send_link_addr = true;
if (port->connector)
drm_modeset_unlock(&mgr->base.lock);
else if (!port->connector && !port->input)
else if (!port->input)
drm_dp_mst_port_add_connector(mstb, port);
if (send_link_addr && port->mstb)
drm_dp_send_link_address(mgr, port->mstb);
if (send_link_addr && port->mstb) {
ret = drm_dp_send_link_address(mgr, port->mstb);
if (ret == 1) /* MSTB below us changed */
changed = true;
else if (ret < 0)
goto fail_put;
}
/* put reference to this port */
drm_dp_mst_topology_put_port(port);
return;
return changed;
fail:
drm_dp_mst_topology_unlink_port(mgr, port);
drm_dp_mst_topology_put_port(port);
if (!created)
if (port->connector)
drm_modeset_unlock(&mgr->base.lock);
fail_put:
drm_dp_mst_topology_put_port(port);
return ret;
}
static void
......@@ -2228,13 +2255,20 @@ drm_dp_get_mst_branch_device_by_guid(struct drm_dp_mst_topology_mgr *mgr,
return mstb;
}
static void drm_dp_check_and_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
static int drm_dp_check_and_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb)
{
struct drm_dp_mst_port *port;
int ret;
bool changed = false;
if (!mstb->link_address_sent)
drm_dp_send_link_address(mgr, mstb);
if (!mstb->link_address_sent) {
ret = drm_dp_send_link_address(mgr, mstb);
if (ret == 1)
changed = true;
else if (ret < 0)
return ret;
}
list_for_each_entry(port, &mstb->ports, next) {
struct drm_dp_mst_branch *mstb_child = NULL;
......@@ -2246,6 +2280,7 @@ static void drm_dp_check_and_send_link_address(struct drm_dp_mst_topology_mgr *m
drm_modeset_lock(&mgr->base.lock, NULL);
drm_dp_send_enum_path_resources(mgr, mstb, port);
drm_modeset_unlock(&mgr->base.lock);
changed = true;
}
if (port->mstb)
......@@ -2253,10 +2288,17 @@ static void drm_dp_check_and_send_link_address(struct drm_dp_mst_topology_mgr *m
mgr, port->mstb);
if (mstb_child) {
drm_dp_check_and_send_link_address(mgr, mstb_child);
ret = drm_dp_check_and_send_link_address(mgr,
mstb_child);
drm_dp_mst_topology_put_mstb(mstb_child);
if (ret == 1)
changed = true;
else if (ret < 0)
return ret;
}
}
return changed;
}
static void drm_dp_mst_link_probe_work(struct work_struct *work)
......@@ -2282,11 +2324,12 @@ static void drm_dp_mst_link_probe_work(struct work_struct *work)
return;
}
drm_dp_check_and_send_link_address(mgr, mstb);
ret = drm_dp_check_and_send_link_address(mgr, mstb);
drm_dp_mst_topology_put_mstb(mstb);
mutex_unlock(&mgr->probe_lock);
drm_kms_helper_hotplug_event(dev);
if (ret)
drm_kms_helper_hotplug_event(dev);
}
static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr,
......@@ -2532,16 +2575,18 @@ drm_dp_dump_link_address(struct drm_dp_link_address_ack_reply *reply)
}
}
static void drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb)
{
struct drm_dp_sideband_msg_tx *txmsg;
struct drm_dp_link_address_ack_reply *reply;
int i, len, ret;
struct drm_dp_mst_port *port, *tmp;
int i, len, ret, port_mask = 0;
bool changed = false;
txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
if (!txmsg)
return;
return -ENOMEM;
txmsg->dst = mstb;
len = build_link_address(txmsg);
......@@ -2567,14 +2612,39 @@ static void drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
drm_dp_check_mstb_guid(mstb, reply->guid);
for (i = 0; i < reply->nports; i++)
drm_dp_mst_handle_link_address_port(mstb, mgr->dev,
&reply->ports[i]);
for (i = 0; i < reply->nports; i++) {
port_mask |= BIT(reply->ports[i].port_number);
ret = drm_dp_mst_handle_link_address_port(mstb, mgr->dev,
&reply->ports[i]);
if (ret == 1)
changed = true;
else if (ret < 0)
goto out;
}
/* Prune any ports that are currently a part of mstb in our in-memory
* topology, but were not seen in this link address. Usually this
* means that they were removed while the topology was out of sync,
* e.g. during suspend/resume
*/
mutex_lock(&mgr->lock);
list_for_each_entry_safe(port, tmp, &mstb->ports, next) {
if (port_mask & BIT(port->port_num))
continue;
DRM_DEBUG_KMS("port %d was not in link address, removing\n",
port->port_num);
list_del(&port->next);
drm_dp_mst_topology_put_port(port);
changed = true;
}
mutex_unlock(&mgr->lock);
out:
if (ret <= 0)
mstb->link_address_sent = false;
kfree(txmsg);
return ret < 0 ? ret : changed;
}
static int
......@@ -3179,6 +3249,23 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_set_mst);
static void
drm_dp_mst_topology_mgr_invalidate_mstb(struct drm_dp_mst_branch *mstb)
{
struct drm_dp_mst_port *port;
/* The link address will need to be re-sent on resume */
mstb->link_address_sent = false;
list_for_each_entry(port, &mstb->ports, next) {
/* The PBN for each port will also need to be re-probed */
port->available_pbn = 0;
if (port->mstb)
drm_dp_mst_topology_mgr_invalidate_mstb(port->mstb);
}
}
/**
* drm_dp_mst_topology_mgr_suspend() - suspend the MST manager
* @mgr: manager to suspend
......@@ -3195,20 +3282,36 @@ void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr)
flush_work(&mgr->up_req_work);
flush_work(&mgr->work);
flush_work(&mgr->delayed_destroy_work);
mutex_lock(&mgr->lock);
if (mgr->mst_state && mgr->mst_primary)
drm_dp_mst_topology_mgr_invalidate_mstb(mgr->mst_primary);
mutex_unlock(&mgr->lock);
}
EXPORT_SYMBOL(drm_dp_mst_topology_mgr_suspend);
/**
* drm_dp_mst_topology_mgr_resume() - resume the MST manager
* @mgr: manager to resume
* @sync: whether or not to perform topology reprobing synchronously
*
* This will fetch DPCD and see if the device is still there,
* if it is, it will rewrite the MSTM control bits, and return.
*
* if the device fails this returns -1, and the driver should do
* If the device fails this returns -1, and the driver should do
* a full MST reprobe, in case we were undocked.
*
* During system resume (where it is assumed that the driver will be calling
* drm_atomic_helper_resume()) this function should be called beforehand with
* @sync set to true. In contexts like runtime resume where the driver is not
* expected to be calling drm_atomic_helper_resume(), this function should be
* called with @sync set to false in order to avoid deadlocking.
*
* Returns: -1 if the MST topology was removed while we were suspended, 0
* otherwise.
*/
int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr)
int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
bool sync)
{
int ret;
u8 guid[16];
......@@ -3241,8 +3344,19 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr)
}
drm_dp_check_mstb_guid(mgr->mst_primary, guid);
/*
* For the final step of resuming the topology, we need to bring the
* state of our in-memory topology back into sync with reality. So,
* restart the probing process as if we're probing a new hub
*/
queue_work(system_long_wq, &mgr->work);
mutex_unlock(&mgr->lock);
if (sync) {
DRM_DEBUG_KMS("Waiting for link probe work to finish re-syncing topology...\n");
flush_work(&mgr->work);
}
return 0;
out_fail:
......
......@@ -7625,7 +7625,8 @@ void intel_dp_mst_resume(struct drm_i915_private *dev_priv)
if (!intel_dp->can_mst)
continue;
ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr);
ret = drm_dp_mst_topology_mgr_resume(&intel_dp->mst_mgr,
true);
if (ret) {
intel_dp->is_mst = false;
drm_dp_mst_topology_mgr_set_mst(&intel_dp->mst_mgr,
......
......@@ -1309,14 +1309,14 @@ nv50_mstm_fini(struct nv50_mstm *mstm)
}
static void
nv50_mstm_init(struct nv50_mstm *mstm)
nv50_mstm_init(struct nv50_mstm *mstm, bool runtime)
{
int ret;
if (!mstm || !mstm->mgr.mst_state)
return;
ret = drm_dp_mst_topology_mgr_resume(&mstm->mgr);
ret = drm_dp_mst_topology_mgr_resume(&mstm->mgr, !runtime);
if (ret == -1) {
drm_dp_mst_topology_mgr_set_mst(&mstm->mgr, false);
drm_kms_helper_hotplug_event(mstm->mgr.dev);
......@@ -2263,7 +2263,7 @@ nv50_display_init(struct drm_device *dev, bool resume, bool runtime)
if (encoder->encoder_type != DRM_MODE_ENCODER_DPMST) {
struct nouveau_encoder *nv_encoder =
nouveau_encoder(encoder);
nv50_mstm_init(nv_encoder->dp.mstm);
nv50_mstm_init(nv_encoder->dp.mstm, runtime);
}
}
......
......@@ -706,7 +706,8 @@ void drm_dp_mst_dump_topology(struct seq_file *m,
void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr);
int __must_check
drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr);
drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
bool sync);
ssize_t drm_dp_mst_dpcd_read(struct drm_dp_aux *aux,
unsigned int offset, void *buffer, size_t size);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment