Skip to content

L
linux
Commit 70ae04e6 authored by Alan Cox's avatar Alan Cox Committed by Greg Kroah-Hartman
Browse files
Options

Staging: sep: kick out various fields we can prove are not needed 

#1: sep->cache_addr is assigned to sep->rar_addr and never changed
    sep->rar_addr is never assigned after this point

#2: sep->cache_bus ditto for sep->rar_bus

#3  sep->rar_region_addr is assigned but necer used

#4  sep->io_addr is in fact private to the probe function and
    the same as the reg_addr

#5  The remainig sep->io fields are in fact function locals

#6  sep->message_shared_area is assigned once from sep->shared_area
    sep->shared_area does not then change

#7  sep->shared_addr and sep->shared_area_addr are the same thing, ditto
    for the bus addresses.
Signed-off-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 4c29e979
Hide whitespace changes
Inline Side-by-side
Showing with 77 additions and 101 deletions
drivers/staging/sep/sep_dev.h
View file @ 70ae04e6
......@@ -34,30 +34,23 @@ struct sep_device {
unsigned long in_use;
unsigned long io_bus;
unsigned long io_end_bus;
unsigned long io_memory_size;
void __iomem *io_addr;
/* address of the shared memory allocated during init for SEP driver
(coherent alloc) */
void *shared_addr;
/* the physical address of the shared area */
dma_addr_t shared_bus;
/* restricted access region */
/* restricted access region (coherent alloc) */
dma_addr_t rar_bus;
void *rar_addr;
/* shared memory region */
dma_addr_t shared_bus;
void *shared_addr;
/* firmware regions */
dma_addr_t cache_bus;
/* firmware regions: cache is at rar_addr */
unsigned long cache_size;
void *cache_addr;
/* follows the cache */
dma_addr_t resident_bus;
unsigned long resident_size;
void *resident_addr;
void *rar_region_addr;
/* start address of the access to the SEP registers from driver */
void __iomem *reg_addr;
/* transaction counter that coordinates the transactions between SEP and HOST */
......@@ -88,13 +81,6 @@ struct sep_device {
/* pointer to the workqueue that handles the flow done interrupts */
struct workqueue_struct *flow_wq;
/* address of the shared memory allocated during init for SEP driver */
void *shared_area;
/* the physical address of the shared area */
dma_addr_t shared_area_bus;
/* Message Shared Area start address - will be allocated during init */
void *message_shared_area_addr;
};
static struct sep_device *sep_dev;
......
drivers/staging/sep/sep_driver.c
View file @ 70ae04e6
......@@ -188,10 +188,6 @@ static int sep_load_firmware(struct sep_device *sep)
edbg("SEP Driver:rar_virtual is %p\n", sep->rar_addr);
edbg("SEP Driver:rar_bus is %08llx\n", (unsigned long long)sep->rar_bus);
sep->rar_region_addr = sep->rar_addr;
sep->cache_bus = sep->rar_bus;
sep->cache_addr = sep->rar_addr;
/* load cache */
error = request_firmware(&fw, cache_name, &sep->pdev->dev);
if (error) {
......@@ -200,12 +196,12 @@ static int sep_load_firmware(struct sep_device *sep)
}
edbg("SEP Driver:cache %08Zx@%p\n", fw->size, (void *) fw->data);
memcpy(sep->cache_addr, (void *)fw->data, fw->size);
memcpy(sep->rar_addr, (void *)fw->data, fw->size);
sep->cache_size = fw->size;
release_firmware(fw);
sep->resident_bus = sep->cache_bus + sep->cache_size;
sep->resident_addr = sep->cache_addr + sep->cache_size;
sep->resident_bus = sep->rar_bus + sep->cache_size;
sep->resident_addr = sep->rar_addr + sep->cache_size;
/* load resident */
error = request_firmware(&fw, res_name, &sep->pdev->dev);
......@@ -221,7 +217,7 @@ static int sep_load_firmware(struct sep_device *sep)
edbg("sep: resident v %p b %08llx cache v %p b %08llx\n",
sep->resident_addr, (unsigned long long)sep->resident_bus,
sep->cache_addr, (unsigned long long)sep->cache_bus);
sep->rar_addr, (unsigned long long)sep->rar_bus);
return 0;
}
......@@ -245,10 +241,8 @@ static int sep_map_and_alloc_shared_area(struct sep_device *sep,
edbg("sep_driver :shared memory dma_alloc_coherent failed\n");
return -ENOMEM;
}
sep->shared_area = sep->shared_addr;
/* set the bus address of the shared area */
sep->shared_area_bus = sep->shared_bus;
edbg("sep: shared_area %ld bytes @%p (bus %08llx)\n",
edbg("sep: shared_addr %ld bytes @%p (bus %08llx)\n",
size, sep->shared_addr, (unsigned long long)sep->shared_bus);
return 0;
}
......@@ -264,17 +258,17 @@ static int sep_map_and_alloc_shared_area(struct sep_device *sep,
static void sep_unmap_and_free_shared_area(struct sep_device *sep, int size)
{
dma_free_coherent(&sep->pdev->dev, size,
sep->shared_area, sep->shared_area_bus);
sep->shared_addr, sep->shared_bus);
}
/**
* sep_shared_area_virt_to_bus - convert bus/virt addresses
* sep_shared_virt_to_bus - convert bus/virt addresses
*
* Returns the bus address inside the shared area according
* to the virtual address.
*/
static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
static dma_addr_t sep_shared_virt_to_bus(struct sep_device *sep,
void *virt_address)
{
dma_addr_t pa = sep->shared_bus + (virt_address - sep->shared_addr);
......@@ -283,13 +277,13 @@ static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep,
}
/**
* sep_shared_area_bus_to_virt - convert bus/virt addresses
* sep_shared_bus_to_virt - convert bus/virt addresses
*
* Returns virtual address inside the shared area according
* to the bus address.
*/
static void *sep_shared_area_bus_to_virt(struct sep_device *sep,
static void *sep_shared_bus_to_virt(struct sep_device *sep,
dma_addr_t bus_address)
{
return sep->shared_addr + (bus_address - sep->shared_bus);
......@@ -391,10 +385,10 @@ static int sep_mmap(struct file *filp, struct vm_area_struct *vma)
return -EAGAIN;
}
edbg("SEP Driver:sep->message_shared_area_addr is %p\n", sep->message_shared_area_addr);
edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr);
/* get bus address */
bus_addr = sep->shared_area_bus;
bus_addr = sep->shared_bus;
edbg("SEP Driver: phys_addr is %08llx\n", (unsigned long long)bus_addr);
......@@ -429,7 +423,7 @@ static unsigned int sep_poll(struct file *filp, poll_table * wait)
retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
for (count = 0; count < 10 * 4; count += 4)
edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
edbg("Poll Debug Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + count)));
}
sep->reply_ct++;
......@@ -445,10 +439,10 @@ static unsigned int sep_poll(struct file *filp, poll_table * wait)
/* check if the data is ready */
if (sep->send_ct == sep->reply_ct) {
for (count = 0; count < 12 * 4; count += 4)
edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
edbg("Sep Mesg Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
for (count = 0; count < 10 * 4; count += 4)
edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + 0x1800 + count)));
edbg("Debug Data Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + 0x1800 + count)));
retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR);
edbg("retval is %lu\n", retval);
......@@ -481,18 +475,18 @@ static int sep_set_time(struct sep_device *sep, unsigned long *address_ptr, unsi
do_gettimeofday(&time);
/* set value in the SYSTEM MEMORY offset */
time_addr = sep->message_shared_area_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
time_addr = sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES;
time_addr[0] = SEP_TIME_VAL_TOKEN;
time_addr[1] = time.tv_sec;
edbg("SEP Driver:time.tv_sec is %lu\n", time.tv_sec);
edbg("SEP Driver:time_addr is %p\n", time_addr);
edbg("SEP Driver:sep->message_shared_area_addr is %p\n", sep->message_shared_area_addr);
edbg("SEP Driver:sep->shared_addr is %p\n", sep->shared_addr);
/* set the output parameters if needed */
if (address_ptr)
*address_ptr = sep_shared_area_virt_to_bus(sep, time_addr);
*address_ptr = sep_shared_virt_to_bus(sep, time_addr);
if (time_in_sec_ptr)
*time_in_sec_ptr = time.tv_sec;
......@@ -517,7 +511,7 @@ static void sep_send_command_handler(struct sep_device *sep)
flush_cache_all();
for (count = 0; count < 12 * 4; count += 4)
edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
/* update counter */
sep->send_ct++;
......@@ -540,7 +534,7 @@ static void sep_send_reply_command_handler(struct sep_device *sep)
/* flash cache */
flush_cache_all();
for (count = 0; count < 12 * 4; count += 4)
edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_area + count)));
edbg("Word %lu of the message is %lu\n", count, *((unsigned long *) (sep->shared_addr + count)));
/* update counter */
sep->send_ct++;
/* send the interrupt to SEP */
......@@ -578,7 +572,7 @@ static int sep_allocate_data_pool_memory_handler(struct sep_device *sep,
/* set the virtual and bus address */
command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
command_args.phys_address = sep->shared_area_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
command_args.phys_address = sep->shared_bus + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + sep->data_pool_bytes_allocated;
/* write the memory back to the user space */
error = copy_to_user((void *) arg, (void *) &command_args, sizeof(struct sep_driver_alloc_t));
......@@ -624,7 +618,7 @@ static int sep_write_into_data_pool_handler(struct sep_device *sep, unsigned lon
goto end_function;
/* calculate the start of the data pool */
data_pool_area_addr = sep->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
/* check that the range of the virtual kernel address is correct */
......@@ -672,7 +666,7 @@ static int sep_read_from_data_pool_handler(struct sep_device *sep, unsigned long
goto end_function;
/* calculate the start of the data pool */
data_pool_area_addr = sep->shared_area + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
data_pool_area_addr = sep->shared_addr + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES;
/* FIXME: These are incomplete all over the driver: what about + len
and when doing that also overflows */
......@@ -1065,7 +1059,7 @@ static void sep_debug_print_lli_tables(struct sep_device *sep, struct sep_lli_en
edbg("SEP Driver:phys table_data_size is %lu num_table_entries is %lu lli_table_ptr is%lu\n", table_data_size, num_table_entries, (unsigned long) lli_table_ptr);
if ((unsigned long) lli_table_ptr != 0xffffffff)
lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_area_bus_to_virt(sep, (unsigned long) lli_table_ptr);
lli_table_ptr = (struct sep_lli_entry_t *) sep_shared_bus_to_virt(sep, (unsigned long) lli_table_ptr);
table_count++;
}
......@@ -1115,16 +1109,16 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
if (data_size == 0) {
/* special case - created 2 entries table with zero data */
in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES);
in_lli_table_ptr = (struct sep_lli_entry_t *) (sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES);
/* FIXME: Should the entry below not be for _bus */
in_lli_table_ptr->physical_address = (unsigned long)sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
in_lli_table_ptr->physical_address = (unsigned long)sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
in_lli_table_ptr->block_size = 0;
in_lli_table_ptr++;
in_lli_table_ptr->physical_address = 0xFFFFFFFF;
in_lli_table_ptr->block_size = 0;
*lli_table_ptr = sep->shared_area_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
*lli_table_ptr = sep->shared_bus + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
*num_entries_ptr = 2;
*table_data_size_ptr = 0;
......@@ -1149,7 +1143,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
sep_lli_entries = sep->in_num_pages;
/* initiate to point after the message area */
lli_table_alloc_addr = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
/* loop till all the entries in in array are not processed */
while (current_entry < sep_lli_entries) {
......@@ -1171,14 +1165,14 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
if (info_entry_ptr == 0) {
/* set the output parameters to physical addresses */
*lli_table_ptr = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
*lli_table_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
*num_entries_ptr = num_entries_in_table;
*table_data_size_ptr = table_data_size;
edbg("SEP Driver:output lli_table_in_ptr is %08lx\n", *lli_table_ptr);
} else {
/* update the info entry of the previous in table */
info_entry_ptr->physical_address = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
info_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
info_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size);
}
......@@ -1188,7 +1182,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
/* print input tables */
sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
sep_shared_area_bus_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr);
sep_shared_bus_to_virt(sep, *lli_table_ptr), *num_entries_ptr, *table_data_size_ptr);
/* the array of the pages */
kfree(lli_array_ptr);
......@@ -1240,7 +1234,7 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
dbg("SEP Driver:--------> sep_construct_dma_tables_from_lli start\n");
/* initiate to pint after the message area */
lli_table_alloc_addr = sep->shared_area + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
lli_table_alloc_addr = sep->shared_addr + SEP_DRIVER_SYNCHRONIC_DMA_TABLES_AREA_OFFSET_IN_BYTES;
current_in_entry = 0;
current_out_entry = 0;
......@@ -1288,9 +1282,9 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
/* if info entry is null - this is the first table built */
if (info_in_entry_ptr == 0) {
/* set the output parameters to physical addresses */
*lli_table_in_ptr = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
*lli_table_in_ptr = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
*in_num_entries_ptr = num_entries_in_table;
*lli_table_out_ptr = sep_shared_area_virt_to_bus(sep, out_lli_table_ptr);
*lli_table_out_ptr = sep_shared_virt_to_bus(sep, out_lli_table_ptr);
*out_num_entries_ptr = num_entries_out_table;
*table_data_size_ptr = table_data_size;
......@@ -1298,11 +1292,11 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
edbg("SEP Driver:output lli_table_out_ptr is %08lx\n", *lli_table_out_ptr);
} else {
/* update the info entry of the previous in table */
info_in_entry_ptr->physical_address = sep_shared_area_virt_to_bus(sep, in_lli_table_ptr);
info_in_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, in_lli_table_ptr);
info_in_entry_ptr->block_size = ((num_entries_in_table) << 24) | (table_data_size);
/* update the info entry of the previous in table */
info_out_entry_ptr->physical_address = sep_shared_area_virt_to_bus(sep, out_lli_table_ptr);
info_out_entry_ptr->physical_address = sep_shared_virt_to_bus(sep, out_lli_table_ptr);
info_out_entry_ptr->block_size = ((num_entries_out_table) << 24) | (table_data_size);
}
......@@ -1317,10 +1311,10 @@ static int sep_construct_dma_tables_from_lli(struct sep_device *sep,
/* print input tables */
sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr);
sep_shared_bus_to_virt(sep, *lli_table_in_ptr), *in_num_entries_ptr, *table_data_size_ptr);
/* print output tables */
sep_debug_print_lli_tables(sep, (struct sep_lli_entry_t *)
sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr);
sep_shared_bus_to_virt(sep, *lli_table_out_ptr), *out_num_entries_ptr, *table_data_size_ptr);
dbg("SEP Driver:<-------- sep_construct_dma_tables_from_lli end\n");
return 0;
}
......@@ -1494,7 +1488,7 @@ static int sep_find_free_flow_dma_table_space(struct sep_device *sep,
unsigned long table_size_in_words;
/* find the start address of the flow DMA table area */
flow_dma_area_start_addr = sep->shared_area + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES;
flow_dma_area_start_addr = sep->shared_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_OFFSET_IN_BYTES;
/* set end address of the flow table area */
flow_dma_area_end_addr = flow_dma_area_start_addr + SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES;
......@@ -1958,8 +1952,8 @@ static int sep_get_static_pool_addr_handler(struct sep_device *sep, unsigned lon
dbg("SEP Driver:--------> sep_get_static_pool_addr_handler start\n");
/*prepare the output parameters in the struct */
command_args.physical_static_address = sep->shared_area_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
command_args.virtual_static_address = (unsigned long)sep->shared_area + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
command_args.physical_static_address = sep->shared_bus + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
command_args.virtual_static_address = (unsigned long)sep->shared_addr + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES;
edbg("SEP Driver:bus_static_address is %08lx, virtual_static_address %08lx\n", command_args.physical_static_address, command_args.virtual_static_address);
......@@ -1984,13 +1978,13 @@ static int sep_get_physical_mapped_offset_handler(struct sep_device *sep, unsign
if (error)
goto end_function;
if (command_args.physical_address < sep->shared_area_bus) {
if (command_args.physical_address < sep->shared_bus) {
error = -EINVAL;
goto end_function;
}
/*prepare the output parameters in the struct */
command_args.offset = command_args.physical_address - sep->shared_area_bus;
command_args.offset = command_args.physical_address - sep->shared_bus;
edbg("SEP Driver:bus_address is %08lx, offset is %lu\n", command_args.physical_address, command_args.offset);
......@@ -2106,26 +2100,26 @@ static int sep_realloc_cache_resident_handler(struct sep_device *sep,
if (error)
return error;
command_args.new_base_addr = sep->shared_area_bus;
command_args.new_base_addr = sep->shared_bus;
/* find the new base address according to the lowest address between
cache, resident and shared area */
if (sep->resident_bus < command_args.new_base_addr)
command_args.new_base_addr = sep->resident_bus;
if (sep->cache_bus < command_args.new_base_addr)
command_args.new_base_addr = sep->cache_bus;
if (sep->rar_bus < command_args.new_base_addr)
command_args.new_base_addr = sep->rar_bus;
/* set the return parameters */
command_args.new_cache_addr = sep->cache_bus;
command_args.new_cache_addr = sep->rar_bus;
command_args.new_resident_addr = sep->resident_bus;
/* set the new shared area */
command_args.new_shared_area_addr = sep->shared_area_bus;
command_args.new_shared_area_addr = sep->shared_bus;
edbg("SEP Driver:command_args.new_shared_area is %08llx\n", command_args.new_shared_area_addr);
edbg("SEP Driver:command_args.new_shared_addr is %08llx\n", command_args.new_shared_area_addr);
edbg("SEP Driver:command_args.new_base_addr is %08llx\n", command_args.new_base_addr);
edbg("SEP Driver:command_args.new_resident_addr is %08llx\n", command_args.new_resident_addr);
edbg("SEP Driver:command_args.new_cache_addr is %08llx\n", command_args.new_cache_addr);
edbg("SEP Driver:command_args.new_rar_addr is %08llx\n", command_args.new_cache_addr);
/* return to user */
if (copy_to_user((void *) arg, &command_args, sizeof(struct sep_driver_realloc_cache_resident_t)))
......@@ -2320,7 +2314,7 @@ static void sep_flow_done_handler(struct work_struct *work)
flag may be checked */
if (flow_data_ptr->input_tables_flag) {
/* copy the message to the shared RAM and signal SEP */
memcpy((void *) flow_data_ptr->message, (void *) sep->shared_area, flow_data_ptr->message_size_in_bytes);
memcpy((void *) flow_data_ptr->message, (void *) sep->shared_addr, flow_data_ptr->message_size_in_bytes);
sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, 0x2);
}
......@@ -2431,6 +2425,8 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
struct sep_device *sep;
int counter;
int size; /* size of memory for allocation */
unsigned long iosize;
unsigned long bar0, end0;
edbg("Sep pci probe starting\n");
if (sep_dev != NULL) {
......@@ -2449,7 +2445,7 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
sep_dev = &sep_instance;
sep = &sep_instance;
edbg("sep->shared_area = %lx\n", (unsigned long) &sep->shared_area);
edbg("sep->shared_addr = %p\n", sep->shared_addr);
/* transaction counter that coordinates the transactions between SEP
and HOST */
sep->send_ct = 0;
......@@ -2470,21 +2466,17 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
goto end_function_error;
}
/* now set the memory regions */
sep->message_shared_area_addr = sep->shared_area;
edbg("SEP Driver: sep->message_shared_area_addr is %p\n", sep->message_shared_area_addr);
#if (SEP_DRIVER_RECONFIG_MESSAGE_AREA == 1)
/* send the new SHARED MESSAGE AREA to the SEP */
sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_area_bus);
sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus);
/* poll for SEP response */
retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
while (retval != 0xffffffff && retval != sep->shared_area_bus)
while (retval != 0xffffffff && retval != sep->shared_bus)
retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR);
/* check the return value (register) */
if (retval != sep->shared_area_bus) {
if (retval != sep->shared_bus) {
error = -ENOMEM;
goto end_function_deallocate_sep_shared_area;
}
......@@ -2506,36 +2498,34 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
sep->pdev = pci_dev_get(pdev);
/* get the io memory start address */
sep->io_bus = pci_resource_start(pdev, 0);
if (!sep->io_bus) {
bar0 = pci_resource_start(pdev, 0);
if (!bar0) {
edbg("SEP Driver error pci resource start\n");
goto end_function_deallocate_sep_shared_area;
}
/* get the io memory end address */
sep->io_end_bus = pci_resource_end(pdev, 0);
if (!sep->io_end_bus) {
end0 = pci_resource_end(pdev, 0);
if (!end0) {
edbg("SEP Driver error pci resource end\n");
goto end_function_deallocate_sep_shared_area;
}
sep->io_memory_size = sep->io_end_bus - sep->io_bus + 1;
iosize = end0 - bar0 + 1;
edbg("SEP Driver:io_bus is %08lx\n", sep->io_bus);
edbg("SEP Driver:io_bus is %08lx\n", bar0);
edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", sep->io_end_bus);
edbg("SEP Driver:io_memory_end_phyaical_address is %08lx\n", end0);
edbg("SEP Driver:io_memory_size is %08lx\n", sep->io_memory_size);
edbg("SEP Driver:io_memory_size is %08lx\n", iosize);
sep->io_addr = ioremap_nocache(sep->io_bus, sep->io_memory_size);
if (!sep->io_addr) {
sep->reg_addr = ioremap_nocache(bar0, iosize);
if (!sep->reg_addr) {
edbg("SEP Driver error ioremap of io memory\n");
goto end_function_deallocate_sep_shared_area;
}
edbg("SEP Driver:io_addr is %p\n", sep->io_addr);
sep->reg_addr = (void __iomem *) sep->io_addr;
edbg("SEP Driver:io_addr is %p\n", sep->reg_addr);
/* set up system base address and shared memory location */
......@@ -2578,7 +2568,7 @@ static int __devinit sep_probe(struct pci_dev *pdev, const struct pci_device_id
sep->rar_addr, sep->rar_bus);
#endif /* SEP_DRIVER_POLLING_MODE */
end_function_uniomap:
iounmap(sep->io_addr);
iounmap(sep->reg_addr);
end_function_deallocate_sep_shared_area:
/* de-allocate shared area */
sep_unmap_and_free_shared_area(sep, size);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7