nvme-rdma: add a NVMe over Fabrics RDMA host driver

This patch implements the RDMA host (initiator in SCSI speak) driver.  It
can be used to connect to remote NVMe over Fabrics controllers over
Infiniband, RoCE or iWarp, and uses the existing NVMe core driver as well
a the new fabrics library.

To connect to all NVMe over Fabrics controller reachable on a given taget
port using RDMA/CM use the following command:

	nvme connect-all -t rdma -a $IPADDR

This requires the latest version of nvme-cli with Fabrics support.
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

drivers/nvme/host/Kconfig

@@ -27,3 +27,19 @@ config BLK_DEV_NVME_SCSI
 
 config NVME_FABRICS
 	tristate
+
+config NVME_RDMA
+	tristate "NVM Express over Fabrics RDMA host driver"
+	depends on INFINIBAND
+	depends on BLK_DEV_NVME
+	select NVME_FABRICS
+	select SG_POOL
+	help
+	  This provides support for the NVMe over Fabrics protocol using
+	  the RDMA (Infiniband, RoCE, iWarp) transport.  This allows you
+	  to use remote block devices exported using the NVMe protocol set.
+
+	  To configure a NVMe over Fabrics controller use the nvme-cli tool
+	  from https://github.com/linux-nvme/nvme-cli.
+
+	  If unsure, say N.

drivers/nvme/host/Makefile

 obj-$(CONFIG_NVME_CORE)			+= nvme-core.o
 obj-$(CONFIG_BLK_DEV_NVME)		+= nvme.o
 obj-$(CONFIG_NVME_FABRICS)		+= nvme-fabrics.o
+obj-$(CONFIG_NVME_RDMA)			+= nvme-rdma.o
 
 nvme-core-y				:= core.o
 nvme-core-$(CONFIG_BLK_DEV_NVME_SCSI)	+= scsi.o
@@ -9,3 +10,5 @@ nvme-core-$(CONFIG_NVM)			+= lightnvm.o
 nvme-y					+= pci.o
 
 nvme-fabrics-y				+= fabrics.o
+
+nvme-rdma-y				+= rdma.o