Skip to content

L
linux
Commit 71377918 authored by Andy Grover's avatar Andy Grover
Browse files
Options

Merge groveronline.com:/root/bk/linux-2.5 

into groveronline.com:/root/bk/linux-acpi
parents a226051e 380ddbbd
Show whitespace changes
Inline Side-by-side
Showing with 236 additions and 1524 deletions
arch/alpha/Kconfig
View file @ 71377918
......@@ -810,47 +810,6 @@ source "drivers/ieee1394/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "drivers/isdn/Kconfig"
......
arch/arm/Kconfig
View file @ 71377918
......@@ -898,45 +898,6 @@ source "drivers/acorn/block/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
endmenu
# source net/ax25/Config.in
source "net/irda/Kconfig"
......
arch/cris/Kconfig
View file @ 71377918
......@@ -603,47 +603,6 @@ source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/i386/Kconfig
View file @ 71377918
......@@ -1436,47 +1436,6 @@ source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/ia64/Kconfig
View file @ 71377918
......@@ -655,44 +655,6 @@ source "net/Kconfig"
if !IA64_HP_SIM
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local systems) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "drivers/isdn/Kconfig"
......
arch/m68k/Kconfig
View file @ 71377918
......@@ -1152,496 +1152,6 @@ endmenu
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
#
# Network device configuration
#
config DUMMY
tristate "Dummy net driver support"
depends on NETDEVICES
---help---
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
address. It is most commonly used in order to make your currently
inactive SLIP address seem like a real address for local programs.
If you use SLIP or PPP, you might want to say Y here. Since this
thing often comes in handy, the default is Y. It won't enlarge your
kernel either. What a deal. Read about it in the Network
Administrator's Guide, available from
<http://www.linuxdoc.org/docs.html#guide>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called dummy.o. If you want to use more than one dummy
device at a time, you need to compile this driver as a module.
Instead of 'dummy', the devices will then be called 'dummy0',
'dummy1' etc.
config SLIP
tristate "SLIP (serial line) support"
depends on NETDEVICES
---help---
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
other local Unix box or if you want to configure your Linux box as a
Slip/CSlip server for other people to dial in. SLIP (Serial Line
Internet Protocol) is a protocol used to send Internet traffic over
serial connections such as telephone lines or null modem cables;
nowadays, the protocol PPP is more commonly used for this same
purpose.
Normally, your access provider has to support SLIP in order for you
to be able to use it, but there is now a SLIP emulator called SLiRP
around (available from
<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
allows you to use SLIP over a regular dial up shell connection. If
you plan to use SLiRP, make sure to say Y to CSLIP, below. The
NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, explains how to
configure SLIP. Note that you don't need this option if you just
want to run term (term is a program which gives you almost full
Internet connectivity if you have a regular dial up shell account on
some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
support will enlarge your kernel by about 4 KB. If unsure, say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called slip.o.
config SLIP_COMPRESSED
bool "CSLIP compressed headers"
depends on SLIP
---help---
This protocol is faster than SLIP because it uses compression on the
TCP/IP headers (not on the data itself), but it has to be supported
on both ends. Ask your access provider if you are not sure and
answer Y, just in case. You will still be able to use plain SLIP. If
you plan to use SLiRP, the SLIP emulator (available from
<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
allows you to use SLIP over a regular dial up shell connection, you
definitely want to say Y here. The NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, explains how to configure
CSLIP. This won't enlarge your kernel.
config SLIP_SMART
bool "Keepalive and linefill"
depends on SLIP
help
Adds additional capabilities to the SLIP driver to support the
RELCOM line fill and keepalive monitoring. Ideal on poor quality
analogue lines.
config SLIP_MODE_SLIP6
bool "Six bit SLIP encapsulation"
depends on SLIP
help
Just occasionally you may need to run IP over hostile serial
networks that don't pass all control characters or are only seven
bit. Saying Y here adds an extra mode you can use with SLIP:
"slip6". In this mode, SLIP will only send normal ASCII symbols over
the serial device. Naturally, this has to be supported at the other
end of the link as well. It's good enough, for example, to run IP
over the async ports of a Camtec JNT Pad. If unsure, say N.
config PPP
tristate "PPP (point-to-point protocol) support"
depends on NETDEVICES
---help---
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
serial) lines. Ask your access provider if they support it, because
otherwise you can't use it; most Internet access providers these
days support PPP rather than SLIP.
To use PPP, you need an additional program called pppd as described
in the PPP-HOWTO, available at
<http://www.linuxdoc.org/docs.html#howto>. Make sure that you have
the version of pppd recommended in <file:Documentation/Changes>.
The PPP option enlarges your kernel by about 16 KB.
There are actually two versions of PPP: the traditional PPP for
asynchronous lines, such as regular analog phone lines, and
synchronous PPP which can be used over digital ISDN lines for
example. If you want to use PPP over phone lines or other
asynchronous serial lines, you need to say Y (or M) here and also to
the next option, "PPP support for async serial ports". For PPP over
synchronous lines, you should say Y (or M) here and to "Support
synchronous PPP", below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you said Y to "Version information on all symbols" above, then
you cannot compile the PPP driver into the kernel; you can then only
compile it as a module. The module will be called ppp_generic.o.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>.
config PPP_MULTILINK
bool "PPP multilink support (EXPERIMENTAL)"
depends on PPP && EXPERIMENTAL
config PPP_FILTER
bool "PPP filtering"
depends on PPP && FILTER
config PPP_ASYNC
tristate "PPP support for async serial ports"
depends on PPP
config PPP_SYNC_TTY
tristate "PPP support for sync tty ports"
depends on PPP
config PPP_DEFLATE
tristate "PPP Deflate compression"
depends on PPP
config PPP_BSDCOMP
tristate "PPP BSD-Compress compression"
depends on PPP
config PPPOE
tristate "PPP over Ethernet (EXPERIMENTAL)"
depends on EXPERIMENTAL && PPP
config EQUALIZER
tristate "EQL (serial line load balancing) support"
depends on NETDEVICES
---help---
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
SLIP (the protocol for sending Internet traffic over telephone
lines) or PPP (a better SLIP) on them, you can make them behave like
one double speed connection using this driver. Naturally, this has
to be supported at the other end as well, either with a similar EQL
Linux driver or with a Livingston Portmaster 2e.
Say Y if you want this and read
<file:Documentation/networking/eql.txt>. You may also want to read
section 6.2 of the NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called eql.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>. If
unsure, say N.
config ARIADNE
tristate "Ariadne support"
depends on NETDEVICES && ZORRO
help
If you have a Village Tronic Ariadne Ethernet adapter, say Y.
Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called ariadne.o. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config ARIADNE2
tristate "Ariadne II support"
depends on NETDEVICES && ZORRO
help
This driver is for the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ariadne2.o. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config A2065
tristate "A2065 support"
depends on NETDEVICES && ZORRO
help
If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called a2065.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
config HYDRA
tristate "Hydra support"
depends on NETDEVICES && ZORRO
help
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called hydra.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
config APNE
tristate "PCMCIA NE2000 support"
depends on NETDEVICES && AMIGA_PCMCIA
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called apne.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
depends on NETDEVICES && APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
except that your Apollo won't be able to boot from it (because the
code in the ROM will be for a PC).
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on NETDEVICES && MAC
help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y
and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on NETDEVICES && MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
a few Nubus and all known Comm Slot Ethernet cards. If you have
one of these say Y and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. This module will
be called macsonic.o.
config SMC9194
tristate "Macintosh SMC 9194 based ethernet cards"
depends on NETDEVICES && MAC
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
another SMC9192/9194 based chipset. Say Y if you want it compiled
into the kernel, and read the file
<file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called smc9194.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on NETDEVICES && MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. This module will
be called mac89x0.o.
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
depends on NETDEVICES && MAC && EXPERIMENTAL
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
the 660AV and 840AV Macintosh. If you have one of these Macintoshes
say Y and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on NETDEVICES && MVME147
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on NETDEVICES && MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on NETDEVICES && BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
config ATARILANCE
tristate "Atari Lance support"
depends on NETDEVICES && ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config ATARI_BIONET
tristate "BioNet-100 support"
depends on NETDEVICES && ATARI && ATARI_ACSI!=n
help
Say Y to include support for BioData's BioNet-100 Ethernet adapter
for the ACSI port. The driver works (has to work...) with a polled
I/O scheme, so it's rather slow :-(
config ATARI_PAMSNET
tristate "PAMsNet support"
depends on NETDEVICES && ATARI && ATARI_ACSI!=n
help
Say Y to include support for the PAMsNet Ethernet adapter for the
ACSI port ("ACSI node"). The driver works (has to work...) with a
polled I/O scheme, so it's rather slow :-(
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on NETDEVICES && (SUN3 || SUN3X)
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUN3_82586
tristate "Sun3 on-board Intel 82586 support"
depends on NETDEVICES && SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
VME boards.
config HPLANCE
bool "HP on-board LANCE support"
depends on NETDEVICES && HP300
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config PLIP
tristate "PLIP (parallel port) support"
depends on NETDEVICES && Q40 && PARPORT
---help---
PLIP (Parallel Line Internet Protocol) is used to create a
reasonably fast mini network consisting of two (or, rarely, more)
local machines. A PLIP link from a Linux box is a popular means to
install a Linux distribution on a machine which doesn't have a
CD-ROM drive (a minimal system has to be transferred with floppies
first). The kernels on both machines need to have this PLIP option
enabled for this to work.
The PLIP driver has two modes, mode 0 and mode 1. The parallel
ports (the connectors at the computers with 25 holes) are connected
with "null printer" or "Turbo Laplink" cables which can transmit 4
bits at a time (mode 0) or with special PLIP cables, to be used on
bidirectional parallel ports only, which can transmit 8 bits at a
time (mode 1); you can find the wiring of these cables in
<file:Documentation/networking/PLIP.txt>. The cables can be up to
15m long. Mode 0 works also if one of the machines runs DOS/Windows
and has some PLIP software installed, e.g. the Crynwr PLIP packet
driver (<http://oak.oakland.edu/simtel.net/msdos/pktdrvr-pre.html>)
and winsock or NCSA's telnet.
If you want to use PLIP, say Y and read the PLIP mini-HOWTO as well
as the NET-3-HOWTO, both available from
<http://www.linuxdoc.org/docs.html#howto>. Note that the PLIP
protocol has been changed and this PLIP driver won't work together
with the PLIP support in Linux versions 1.0.x. This option enlarges
your kernel by about 8 KB.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called plip.o. If unsure, say Y or M, in case you buy a laptop
later.
config NE2000
tristate "NE2000/NE1000 support"
depends on NETDEVICES && Q40 && m
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>. Many Ethernet cards
without a specific driver are compatible with NE2000.
If you have a PCI NE2000 card however, say N here and Y to "PCI
NE2000 support", above. If you have a NE2000 card and are running on
an MCA system (a bus system used on some IBM PS/2 computers and
laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ne.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt> as well
as <file:Documentation/networking/net-modules.txt>.
endmenu
menu "Character devices"
config SERIAL
......
arch/m68knommu/Kconfig
View file @ 71377918
......@@ -611,47 +611,6 @@ source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/mips/Kconfig
View file @ 71377918
......@@ -919,47 +919,6 @@ endif
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/mips64/Kconfig
View file @ 71377918
......@@ -504,47 +504,6 @@ endmenu
#source drivers/message/i2o/Config.in
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/parisc/Kconfig
View file @ 71377918
......@@ -276,46 +276,6 @@ source "drivers/md/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
#source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/ppc/Kconfig
View file @ 71377918
......@@ -1415,47 +1415,6 @@ source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/ppc64/Kconfig
View file @ 71377918
......@@ -354,47 +354,6 @@ source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/sh/Kconfig
View file @ 71377918
......@@ -745,48 +745,6 @@ source "drivers/ieee1394/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
menu "Old CD-ROM drivers (not SCSI, not IDE)"
config CD_NO_IDESCSI
......
arch/sparc/Kconfig
View file @ 71377918
......@@ -883,396 +883,6 @@ source "drivers/fc4/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
config DUMMY
tristate "Dummy net driver support"
depends on NETDEVICES
---help---
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
address. It is most commonly used in order to make your currently
inactive SLIP address seem like a real address for local programs.
If you use SLIP or PPP, you might want to say Y here. Since this
thing often comes in handy, the default is Y. It won't enlarge your
kernel either. What a deal. Read about it in the Network
Administrator's Guide, available from
<http://www.linuxdoc.org/docs.html#guide>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called dummy.o. If you want to use more than one dummy
device at a time, you need to compile this driver as a module.
Instead of 'dummy', the devices will then be called 'dummy0',
'dummy1' etc.
config BONDING
tristate "Bonding driver support"
depends on NETDEVICES
---help---
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
Channels together. This is called 'Etherchannel' by Cisco,
'Trunking' by Sun, and 'Bonding' in Linux.
If you have two Ethernet connections to some other computer, you can
make them behave like one double speed connection using this driver.
Naturally, this has to be supported at the other end as well, either
with a similar Bonding Linux driver, a Cisco 5500 switch or a
SunTrunking SunSoft driver.
This is similar to the EQL driver, but it merges Ethernet segments
instead of serial lines.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. The module
will be called bonding.o.
config TUN
tristate "Universal TUN/TAP device driver support"
depends on NETDEVICES
---help---
TUN/TAP provides packet reception and transmission for user space
programs. It can be viewed as a simple Point-to-Point or Ethernet
device, which instead of receiving packets from a physical media,
receives them from user space program and instead of sending packets
via physical media writes them to the user space program.
When a program opens /dev/net/tun, driver creates and registers
corresponding net device tunX or tapX. After a program closed above
devices, driver will automatically delete tunXX or tapXX device and
all routes corresponding to it.
Please read <file:Documentation/networking/tuntap.txt> for more
information.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called tun.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
If you don't know what to use this for, you don't need it.
config ETHERTAP
tristate "Ethertap network tap (OBSOLETE)"
depends on NETDEVICES && EXPERIMENTAL && NETLINK
---help---
If you say Y here (and have said Y to "Kernel/User network link
driver", above) and create a character special file /dev/tap0 with
major number 36 and minor number 16 using mknod ("man mknod"), you
will be able to have a user space program read and write raw
Ethernet frames from/to that special file. tap0 can be configured
with ifconfig and route like any other Ethernet device but it is not
connected to any physical LAN; everything written by the user to
/dev/tap0 is treated by the kernel as if it had come in from a LAN
to the device tap0; everything the kernel wants to send out over the
device tap0 can instead be read by the user from /dev/tap0: the user
mode program replaces the LAN that would be attached to an ordinary
Ethernet device. Please read the file
<file:Documentation/networking/ethertap.txt> for more information.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ethertap.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
If you don't know what to use this for, you don't need it.
config PPP
tristate "PPP (point-to-point protocol) support"
depends on NETDEVICES
---help---
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
serial) lines. Ask your access provider if they support it, because
otherwise you can't use it; most Internet access providers these
days support PPP rather than SLIP.
To use PPP, you need an additional program called pppd as described
in the PPP-HOWTO, available at
<http://www.linuxdoc.org/docs.html#howto>. Make sure that you have
the version of pppd recommended in <file:Documentation/Changes>.
The PPP option enlarges your kernel by about 16 KB.
There are actually two versions of PPP: the traditional PPP for
asynchronous lines, such as regular analog phone lines, and
synchronous PPP which can be used over digital ISDN lines for
example. If you want to use PPP over phone lines or other
asynchronous serial lines, you need to say Y (or M) here and also to
the next option, "PPP support for async serial ports". For PPP over
synchronous lines, you should say Y (or M) here and to "Support
synchronous PPP", below.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
If you said Y to "Version information on all symbols" above, then
you cannot compile the PPP driver into the kernel; you can then only
compile it as a module. The module will be called ppp_generic.o.
If you want to compile it as a module, say M here and read
<file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>.
config PPP_ASYNC
tristate "PPP support for async serial ports"
depends on PPP
---help---
Say Y (or M) here if you want to be able to use PPP over standard
asynchronous serial ports, such as COM1 or COM2 on a PC. If you use
a modem (not a synchronous or ISDN modem) to contact your ISP, you
need this option.
This code is also available as a module (code which can be inserted
into and removed from the running kernel). If you want to compile
it as a module, say M here and read <file:Documentation/modules.txt>.
If unsure, say Y.
config PPP_SYNC_TTY
tristate "PPP support for sync tty ports"
depends on PPP
help
Say Y (or M) here if you want to be able to use PPP over synchronous
(HDLC) tty devices, such as the SyncLink adapter. These devices
are often used for high-speed leased lines like T1/E1.
This code is also available as a module (code which can be inserted
into and removed from the running kernel). If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
config PPP_DEFLATE
tristate "PPP Deflate compression"
depends on PPP
---help---
Support for the Deflate compression method for PPP, which uses the
Deflate algorithm (the same algorithm that gzip uses) to compress
each PPP packet before it is sent over the wire. The machine at the
other end of the PPP link (usually your ISP) has to support the
Deflate compression method as well for this to be useful. Even if
they don't support it, it is safe to say Y here.
This code is also available as a module (code which can be inserted
into and removed from the running kernel). If you want to compile
it as a module, say M here and read
<file:Documentation/modules.txt>.
config PPP_BSDCOMP
tristate "PPP BSD-Compress compression"
depends on NETDEVICES && PPP!=n && m
---help---
Support for the BSD-Compress compression method for PPP, which uses
the LZW compression method to compress each PPP packet before it is
sent over the wire. The machine at the other end of the PPP link
(usually your ISP) has to support the BSD-Compress compression
method as well for this to be useful. Even if they don't support it,
it is safe to say Y here.
The PPP Deflate compression method ("PPP Deflate compression",
above) is preferable to BSD-Compress, because it compresses better
and is patent-free.
Note that the BSD compression code will always be compiled as a
module; it is called bsd_comp.o and will show up in the directory
modules once you have said "make modules". If unsure, say N.
config SLIP
tristate "SLIP (serial line) support"
depends on NETDEVICES
---help---
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
other local Unix box or if you want to configure your Linux box as a
Slip/CSlip server for other people to dial in. SLIP (Serial Line
Internet Protocol) is a protocol used to send Internet traffic over
serial connections such as telephone lines or null modem cables;
nowadays, the protocol PPP is more commonly used for this same
purpose.
Normally, your access provider has to support SLIP in order for you
to be able to use it, but there is now a SLIP emulator called SLiRP
around (available from
<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
allows you to use SLIP over a regular dial up shell connection. If
you plan to use SLiRP, make sure to say Y to CSLIP, below. The
NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, explains how to
configure SLIP. Note that you don't need this option if you just
want to run term (term is a program which gives you almost full
Internet connectivity if you have a regular dial up shell account on
some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
support will enlarge your kernel by about 4 KB. If unsure, say N.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. The module will be
called slip.o.
config SLIP_COMPRESSED
bool "CSLIP compressed headers"
depends on SLIP
---help---
This protocol is faster than SLIP because it uses compression on the
TCP/IP headers (not on the data itself), but it has to be supported
on both ends. Ask your access provider if you are not sure and
answer Y, just in case. You will still be able to use plain SLIP. If
you plan to use SLiRP, the SLIP emulator (available from
<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
allows you to use SLIP over a regular dial up shell connection, you
definitely want to say Y here. The NET-3-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>, explains how to configure
CSLIP. This won't enlarge your kernel.
config SLIP_SMART
bool "Keepalive and linefill"
depends on SLIP
help
Adds additional capabilities to the SLIP driver to support the
RELCOM line fill and keepalive monitoring. Ideal on poor quality
analogue lines.
config SLIP_MODE_SLIP6
bool "Six bit SLIP encapsulation"
depends on SLIP
help
Just occasionally you may need to run IP over hostile serial
networks that don't pass all control characters or are only seven
bit. Saying Y here adds an extra mode you can use with SLIP:
"slip6". In this mode, SLIP will only send normal ASCII symbols over
the serial device. Naturally, this has to be supported at the other
end of the link as well. It's good enough, for example, to run IP
over the async ports of a Camtec JNT Pad. If unsure, say N.
config SUNLANCE
tristate "Sun LANCE support"
depends on NETDEVICES
help
This driver supports the "le" interface present on all 32-bit Sparc
systems, on some older Ultra systems and as an Sbus option. These
cards are based on the AMD Lance chipset, which is better known
via the NE2100 cards.
This support is also available as a module called sunlance.o ( =
code which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config HAPPYMEAL
tristate "Sun Happy Meal 10/100baseT support"
depends on NETDEVICES
help
This driver supports the "hme" interface present on most Ultra
systems and as an option on older Sbus systems. This driver supports
both PCI and Sbus devices. This driver also supports the "qfe" quad
100baseT device available in both PCI and Sbus configurations.
This support is also available as a module called sunhme.o ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config SUNBMAC
tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
depends on NETDEVICES && EXPERIMENTAL
help
This driver supports the "be" interface available as an Sbus option.
This is Sun's older 100baseT Ethernet device.
This support is also available as a module called sunbmac.o ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config SUNQE
tristate "Sun QuadEthernet support"
depends on NETDEVICES
help
This driver supports the "qe" 10baseT Ethernet device, available as
an Sbus option. Note that this is not the same as Quad FastEthernet
"qfe" which is supported by the Happy Meal driver instead.
This support is also available as a module called sunqe.o ( = code
which can be inserted in and removed from the running kernel
whenever you want). If you want to compile it as a module, say M
here and read <file:Documentation/modules.txt>.
config MYRI_SBUS
tristate "MyriCOM Gigabit Ethernet support"
depends on NETDEVICES
help
This driver supports MyriCOM Sbus gigabit Ethernet cards.
If you want to compile this driver as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt>. This is
recommended. The module will be called myri_sbus.o.
config VORTEX
tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
depends on NETDEVICES && PCI
---help---
This option enables driver support for a large number of 10mbps and
10/100mbps EISA, PCI and PCMCIA 3Com network cards:
"Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
"Boomerang" (EtherLink XL 3c900 or 3c905) PCI
"Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
"Tornado" (3c905) PCI
"Hurricane" (3c555/3cSOHO) PCI
If you have such a card, say Y and read the Ethernet-HOWTO,
available from <http://www.linuxdoc.org/docs.html#howto>. More
specific information is in
<file:Documentation/networking/vortex.txt> and in the comments at
the beginning of <file:drivers/net/3c59x.c>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>.
# bool ' FDDI driver support' CONFIG_FDDI
# if [ "$CONFIG_FDDI" = "y" ]; then
# fi
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
# This one must be before the filesystem configs. -DaveM
......
arch/sparc64/Kconfig
View file @ 71377918
......@@ -1404,47 +1404,6 @@ source "drivers/ieee1394/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
# This one must be before the filesystem configs. -DaveM
......
arch/v850/Kconfig
View file @ 71377918
......@@ -304,47 +304,6 @@ source "drivers/message/i2o/Kconfig"
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
source "drivers/atm/Kconfig"
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
arch/x86_64/Kconfig
View file @ 71377918
......@@ -567,49 +567,6 @@ source "drivers/ieee1394/Kconfig"
#source drivers/message/i2o/Config.in
source "net/Kconfig"
menu "Network device support"
depends on NET
config NETDEVICES
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
source "drivers/net/Kconfig"
# ATM seems to be largely 64bit unsafe and also unmaintained - disable it for now.
# if [ "$CONFIG_ATM" = "y" ]; then
# source drivers/atm/Config.in
# fi
endmenu
source "net/ax25/Kconfig"
source "net/irda/Kconfig"
......
drivers/net/Kconfig
View file @ 71377918
#
# Network device configuration
#
source "drivers/net/arcnet/Kconfig"
config NETDEVICES
depends on NET
bool "Network device support"
---help---
You can say N here if you don't intend to connect your Linux box to
any other computer at all or if all your connections will be over a
telephone line with a modem either via UUCP (UUCP is a protocol to
forward mail and news between unix hosts over telephone lines; read
the UUCP-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>) or dialing up a shell
account or a BBS, even using term (term is a program which gives you
almost full Internet connectivity if you have a regular dial up
shell account on some Internet connected Unix computer. Read
<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>).
You'll have to say Y if your computer contains a network card that
you want to use under Linux (make sure you know its name because you
will be asked for it and read the Ethernet-HOWTO (especially if you
plan to use more than one network card under Linux)) or if you want
to use SLIP (Serial Line Internet Protocol is the protocol used to
send Internet traffic over telephone lines or null modem cables) or
CSLIP (compressed SLIP) or PPP (Point to Point Protocol, a better
and newer replacement for SLIP) or PLIP (Parallel Line Internet
Protocol is mainly used to create a mini network by connecting the
parallel ports of two local machines) or AX.25/KISS (protocol for
sending Internet traffic over amateur radio links).
Make sure to read the NET-3-HOWTO. Eventually, you will have to read
Olaf Kirch's excellent and free book "Network Administrator's
Guide", to be found in <http://www.linuxdoc.org/docs.html#guide>. If
unsure, say Y.
if NETDEVICES
source "drivers/net/arcnet/Kconfig"
endif
config DUMMY
tristate "Dummy net driver support"
......@@ -245,6 +280,19 @@ config ARIADNE
want). The module is called ariadne.o. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config ARIADNE2
tristate "Ariadne II support"
depends on NETDEVICES && ZORRO
help
This driver is for the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called ariadne2.o. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config NE2K_ZORRO
tristate "Ariadne II and X-Surf support"
depends on NET_ETHERNET && ZORRO
......@@ -272,6 +320,156 @@ config HYDRA
want). The module is called hydra.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
config APNE
tristate "PCMCIA NE2000 support"
depends on NETDEVICES && AMIGA_PCMCIA
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
This driver is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you
want). The module is called apne.o. If you want to compile it as a
module, say M here and read <file:Documentation/modules.txt>.
config APOLLO_ELPLUS
tristate "Apollo 3c505 support"
depends on NETDEVICES && APOLLO
help
Say Y or M here if your Apollo has a 3Com 3c505 ISA Ethernet card.
If you don't have one made for Apollos, you can use one from a PC,
except that your Apollo won't be able to boot from it (because the
code in the ROM will be for a PC).
config MAC8390
bool "Macintosh NS 8390 based ethernet cards"
depends on NETDEVICES && MAC
help
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y
and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
config MAC89x0
tristate "Macintosh CS89x0 based ethernet cards"
depends on NETDEVICES && MAC
---help---
Support for CS89x0 chipset based Ethernet cards. If you have a
Nubus or LC-PDS network (Ethernet) card of this type, say Y and
read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. This module will
be called mac89x0.o.
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on NETDEVICES && MAC
---help---
Support for NatSemi SONIC based Ethernet devices. This includes
the onboard Ethernet in many Quadras as well as some LC-PDS,
a few Nubus and all known Comm Slot Ethernet cards. If you have
one of these say Y and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
If you want to compile this as a module ( = code which can be
inserted in and removed from the running kernel whenever you want),
say M here and read <file:Documentation/modules.txt> as well as
<file:Documentation/networking/net-modules.txt>. This module will
be called macsonic.o.
config MACMACE
bool "Macintosh (AV) onboard MACE ethernet (EXPERIMENTAL)"
depends on NETDEVICES && MAC && EXPERIMENTAL
help
Support for the onboard AMD 79C940 MACE Ethernet controller used in
the 660AV and 840AV Macintosh. If you have one of these Macintoshes
say Y and read the Ethernet-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
config MVME147_NET
tristate "MVME147 (Lance) Ethernet support"
depends on NETDEVICES && MVME147
help
Support for the on-board Ethernet interface on the Motorola MVME147
single-board computer. Say Y here to include the
driver for this chip in your kernel. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config MVME16x_NET
tristate "MVME16x Ethernet support"
depends on NETDEVICES && MVME16x
help
This is the driver for the Ethernet interface on the Motorola
MVME162, 166, 167, 172 and 177 boards. Say Y here to include the
driver for this chip in your kernel. If you want to compile it as
a module, say M here and read <file:Documentation/modules.txt>.
config BVME6000_NET
tristate "BVME6000 Ethernet support"
depends on NETDEVICES && BVME6000
help
This is the driver for the Ethernet interface on BVME4000 and
BVME6000 VME boards. Say Y here to include the driver for this chip
in your kernel. If you want to compile it as a module, say M here
and read <file:Documentation/modules.txt>.
config ATARILANCE
tristate "Atari Lance support"
depends on NETDEVICES && ATARI
help
Say Y to include support for several Atari Ethernet adapters based
on the AMD Lance chipset: RieblCard (with or without battery), or
PAMCard VME (also the version by Rhotron, with different addresses).
config ATARI_BIONET
tristate "BioNet-100 support"
depends on NETDEVICES && ATARI && ATARI_ACSI!=n
help
Say Y to include support for BioData's BioNet-100 Ethernet adapter
for the ACSI port. The driver works (has to work...) with a polled
I/O scheme, so it's rather slow :-(
config ATARI_PAMSNET
tristate "PAMsNet support"
depends on NETDEVICES && ATARI && ATARI_ACSI!=n
help
Say Y to include support for the PAMsNet Ethernet adapter for the
ACSI port ("ACSI node"). The driver works (has to work...) with a
polled I/O scheme, so it's rather slow :-(
config SUN3LANCE
tristate "Sun3/Sun3x on-board LANCE support"
depends on NETDEVICES && (SUN3 || SUN3X)
help
Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
featured an AMD Lance 10Mbit Ethernet controller on board; say Y
here to compile in the Linux driver for this and enable Ethernet.
General Linux information on the Sun 3 and 3x series (now
discontinued) is at
<http://www.angelfire.com/ca2/tech68k/sun3.html>.
If you're not building a kernel for a Sun 3, say N.
config SUN3_82586
tristate "Sun3 on-board Intel 82586 support"
depends on NETDEVICES && SUN3
help
This driver enables support for the on-board Intel 82586 based
Ethernet adapter found on Sun 3/1xx and 3/2xx motherboards. Note
that this driver does not support 82586-based adapters on additional
VME boards.
config HPLANCE
bool "HP on-board LANCE support"
depends on NETDEVICES && HP300
help
If you want to use the builtin "LANCE" Ethernet controller on an
HP300 machine, say Y here.
config LASI_82596
tristate "Lasi ethernet"
depends on NET_ETHERNET && PARISC && GSC_LASI
......@@ -384,7 +582,7 @@ config SUNGEM
config NET_VENDOR_3COM
bool "3COM cards"
depends on NET_ETHERNET
depends on NET_ETHERNET && (ISA || EISA || MCA || PCI)
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
......@@ -555,7 +753,7 @@ config LANCE
config NET_VENDOR_SMC
bool "Western Digital/SMC cards"
depends on NET_ETHERNET
depends on NET_ETHERNET && (ISA || MCA || EISA || MAC)
help
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
......@@ -631,7 +829,7 @@ config ULTRA32
config SMC9194
tristate "SMC 9194 support"
depends on NET_VENDOR_SMC && ISA
depends on NET_VENDOR_SMC && (ISA || MAC)
---help---
This is support for the SMC9xxx based Ethernet cards. Choose this
option if you have a DELL laptop with the docking station, or
......@@ -648,7 +846,7 @@ config SMC9194
config NET_VENDOR_RACAL
bool "Racal-Interlan (Micom) NI cards"
depends on NET_ETHERNET
depends on NET_ETHERNET && ISA
help
If you have a network (Ethernet) card belonging to this class, such
as the NI5010, NI5210 or NI6210, say Y and read the Ethernet-HOWTO,
......@@ -898,7 +1096,7 @@ config ETH16I
config NE2000
tristate "NE2000/NE1000 support"
depends on NET_ISA
depends on NET_ISA || (Q40 && m)
---help---
If you have a network (Ethernet) card of this type, say Y and read
the Ethernet-HOWTO, available from
......@@ -1459,7 +1657,7 @@ config LAN_SAA9730
config NET_POCKET
bool "Pocket and portable adapters"
depends on NET_ETHERNET
depends on NET_ETHERNET && ISA
---help---
Cute little network (Ethernet) devices which attach to the parallel
port ("pocket adapters"), commonly used with laptops. If you have
......@@ -1777,7 +1975,7 @@ config VETH
config FDDI
bool "FDDI driver support"
depends on NETDEVICES
depends on NETDEVICES && (PCI || EISA)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
......@@ -1828,7 +2026,7 @@ config SKFP
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
depends on NETDEVICES && EXPERIMENTAL && INET
depends on NETDEVICES && EXPERIMENTAL && INET && PCI
help
HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
......@@ -2181,7 +2379,7 @@ config ARLAN
config AIRONET4500
tristate "Aironet 4500/4800 series adapters"
depends on NET_RADIO
depends on NET_RADIO && (PCI || ISA || PCMCIA)
---help---
www.aironet.com (recently bought by Cisco) makes these 802.11 DS
adapters. Driver by Elmer Joandi (elmer@ylenurme.ee).
......@@ -2286,7 +2484,7 @@ source "drivers/net/tokenring/Kconfig"
config NET_FC
bool "Fibre Channel driver support"
depends on NETDEVICES
depends on NETDEVICES && SCSI && PCI
help
Fibre Channel is a high speed serial protocol mainly used to connect
large storage devices to the computer; it is compatible with and
......@@ -2348,3 +2546,4 @@ source "drivers/net/wan/Kconfig"
source "drivers/net/pcmcia/Kconfig"
source "drivers/atm/Kconfig"
drivers/net/arcnet/Kconfig
View file @ 71377918
......@@ -3,7 +3,7 @@
#
menu "ARCnet devices"
depends on NETDEVICES
depends on NETDEVICES && (ISA || PCI)
config ARCNET
tristate "ARCnet support"
......
drivers/net/tokenring/Kconfig
View file @ 71377918
......@@ -91,7 +91,7 @@ config 3C359
config TMS380TR
tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
depends on TR
depends on TR && (PCI || ISA)
---help---
This driver provides generic support for token ring adapters
based on the Texas Instruments TMS380 series chipsets. This
......
drivers/net/wireless/Kconfig
View file @ 71377918
......@@ -2,12 +2,12 @@
# Wireless LAN device configuration
#
comment "Wireless ISA/PCI cards support"
depends on NET_RADIO
depends on NET_RADIO && (ISA || PCI || ALL_PPC || PCMCIA)
# Good old obsolete Wavelan.
config WAVELAN
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
depends on NET_RADIO
depends on NET_RADIO && ISA
---help---
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
a Radio LAN (wireless Ethernet-like Local Area Network) using the
......@@ -54,7 +54,7 @@ config AIRO
config HERMES
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
depends on NET_RADIO
depends on NET_RADIO && (ALL_PPC || PCI || PCMCIA)
---help---
A driver for 802.11b wireless cards based based on the "Hermes" or
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
......
init/Kconfig
View file @ 71377918
......@@ -37,22 +37,6 @@ endmenu
menu "General setup"
config NET
bool "Networking support"
---help---
Unless you really know what you are doing, you should say Y here.
The reason is that some programs need kernel networking support even
when running on a stand-alone machine that isn't connected to any
other computer. If you are upgrading from an older kernel, you
should consider updating your networking tools too because changes
in the kernel and the tools often go hand in hand. The tools are
contained in the package net-tools, the location and version number
of which are given in <file:Documentation/Changes>.
For a general introduction to Linux networking, it is highly
recommended to read the NET-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
config SYSVIPC
bool "System V IPC"
---help---
......
net/Kconfig
View file @ 71377918
......@@ -2,6 +2,24 @@
# Network configuration
#
menu "Networking support"
config NET
bool "Networking support"
---help---
Unless you really know what you are doing, you should say Y here.
The reason is that some programs need kernel networking support even
when running on a stand-alone machine that isn't connected to any
other computer. If you are upgrading from an older kernel, you
should consider updating your networking tools too because changes
in the kernel and the tools often go hand in hand. The tools are
contained in the package net-tools, the location and version number
of which are given in <file:Documentation/Changes>.
For a general introduction to Linux networking, it is highly
recommended to read the NET-HOWTO, available from
<http://www.linuxdoc.org/docs.html#howto>.
menu "Networking options"
depends on NET
......@@ -652,3 +670,6 @@ endmenu
endmenu
source "drivers/net/Kconfig"
endmenu
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7