Merge bk://bk.arm.linux.org.uk

into home.transmeta.com:/home/torvalds/v2.5/linux

arch/arm/boot/compressed/ofw-shark.c

@@ -27,7 +27,7 @@ create_params (unsigned long *buffer)
 	/* Head of the taglist */
 	tag->hdr.tag  = ATAG_CORE;
 	tag->hdr.size = tag_size(tag_core);
-	tag->u.core.flags = FLAG_READONLY;
+	tag->u.core.flags = 1;
 	tag->u.core.pagesize = PAGE_SIZE;
 	tag->u.core.rootdev = 0;
 

arch/arm/def-configs/shark

@@ -40,6 +40,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -109,6 +110,12 @@ CONFIG_ARCH_SHARK=y
 # CONFIG_SA1100_USB_CHAR is not set
 # CONFIG_H3600_SLEEVE is not set
 
+#
+# Intel PXA250/210 Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_ARCH_PXA_IDP is not set
+
 #
 # CLPS711X/EP721X Implementations
 #
@@ -120,6 +127,19 @@ CONFIG_ARCH_SHARK=y
 # CONFIG_ARCH_FORTUNET is not set
 # CONFIG_ARCH_EP7211 is not set
 # CONFIG_ARCH_EP7212 is not set
+
+#
+# IOP310 Implementation Options
+#
+# CONFIG_ARCH_IQ80310 is not set
+
+#
+# IOP310 Chipset Features
+#
+# CONFIG_IOP310_AAU is not set
+# CONFIG_IOP310_DMA is not set
+# CONFIG_IOP310_MU is not set
+# CONFIG_IOP310_PMON is not set
 # CONFIG_ARCH_ACORN is not set
 # CONFIG_FOOTBRIDGE is not set
 # CONFIG_FOOTBRIDGE_HOST is not set
@@ -159,6 +179,9 @@ CONFIG_PCI_HOST_VIA82C505=y
 CONFIG_ISA=y
 CONFIG_ISA_DMA=y
 # CONFIG_FIQ is not set
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
 # CONFIG_PCI_NAMES is not set
 # CONFIG_HOTPLUG is not set
 # CONFIG_PCMCIA is not set
@@ -177,10 +200,11 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_PREEMPT is not set
 # CONFIG_APM is not set
 # CONFIG_ARTHUR is not set
+CONFIG_CMDLINE=""
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
-# CONFIG_ALIGNMENT_TRAP is not set
+CONFIG_ALIGNMENT_TRAP=y
 
 #
 # Parallel port support
@@ -200,6 +224,11 @@ CONFIG_PARPORT_PC_CML1=y
 # CONFIG_PARPORT_OTHER is not set
 # CONFIG_PARPORT_1284 is not set
 
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
 #
 # Plug and Play configuration
 #
@@ -217,6 +246,7 @@ CONFIG_PARPORT_PC_CML1=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_CISS_SCSI_TAPE is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
@@ -254,7 +284,6 @@ CONFIG_INET=y
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
 
@@ -263,6 +292,11 @@ CONFIG_INET=y
 #
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# Appletalk devices
+#
+# CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
@@ -378,7 +412,7 @@ CONFIG_CS89x0=y
 # CONFIG_WAN is not set
 
 #
-# "Tulip" family network device support
+# Tulip family network device support
 #
 # CONFIG_NET_TULIP is not set
 
@@ -393,38 +427,66 @@ CONFIG_CS89x0=y
 # CONFIG_IRDA is not set
 
 #
-# ATA/IDE/MFM/RLL support
+# ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
-
-#
-# ATA and ATAPI Block devices
-#
 CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
 # CONFIG_BLK_DEV_HD_IDE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECS is not set
+CONFIG_ATAPI=y
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 # CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDECS is not set
 
 #
-# IDE chipset support
+# ATA host controller support
 #
+# CONFIG_BLK_DEV_RZ1000 is not set
 # CONFIG_BLK_DEV_CMD640 is not set
 # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
 # CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
+
+#
+#   PCI host controller support
+#
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+# CONFIG_BLK_DEV_IDEDMA_PCI is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_IDE_TCQ is not set
+# CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
+# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_AEC6280_BURST is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_WDC_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_HPT34X_AUTODMA is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX is not set
+# CONFIG_PDC202XX_BURST is not set
+# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_IVB is not set
 # CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_ATARAID is not set
 # CONFIG_BLK_DEV_ATARAID_PDC is not set
@@ -451,6 +513,7 @@ CONFIG_CHR_DEV_SG=m
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
 # CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_REPORT_LUNS is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 
@@ -462,7 +525,6 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_DPT_I2O is not set
@@ -522,42 +584,60 @@ CONFIG_CHR_DEV_SG=m
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN is not set
+# CONFIG_ISDN_BOOL is not set
 
 #
 # Input device support
 #
 # CONFIG_INPUT is not set
+
+#
+# Userland interfaces
+#
 # CONFIG_INPUT_KEYBDEV is not set
 # CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_TSLIBDEV is not set
 # CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Input I/O drivers
+#
 # CONFIG_GAMEPORT is not set
 CONFIG_SOUND_GAMEPORT=y
 # CONFIG_GAMEPORT_NS558 is not set
 # CONFIG_GAMEPORT_L4 is not set
-# CONFIG_INPUT_EMU10K1 is not set
-# CONFIG_GAMEPORT_PCIGAME is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_VORTEX is not set
 # CONFIG_GAMEPORT_FM801 is not set
 # CONFIG_GAMEPORT_CS461x is not set
 # CONFIG_SERIO is not set
+# CONFIG_SERIO_I8042 is not set
 # CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+
+#
+# Input Device Drivers
+#
 
 #
 # Character devices
 #
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
 # CONFIG_SERIAL_8250_MANY_PORTS is not set
 # CONFIG_SERIAL_8250_SHARE_IRQ is not set
@@ -568,10 +648,6 @@ CONFIG_SERIAL_CONSOLE=y
 #
 # Non-8250 serial port support
 #
-
-#
-# ARM Serial drivers
-#
 # CONFIG_ATOMWIDE_SERIAL is not set
 # CONFIG_DUALSP_SERIAL is not set
 # CONFIG_SERIAL_ANAKIN is not set
@@ -580,6 +656,7 @@ CONFIG_SERIAL_CONSOLE=y
 # CONFIG_SERIAL_AMBA_CONSOLE is not set
 # CONFIG_SERIAL_CLPS711X is not set
 # CONFIG_SERIAL_CLPS711X_CONSOLE is not set
+# CONFIG_SERIAL_CLPS711X_OLD_NAME is not set
 # CONFIG_SERIAL_21285 is not set
 # CONFIG_SERIAL_21285_OLD is not set
 # CONFIG_SERIAL_21285_CONSOLE is not set
@@ -587,6 +664,8 @@ CONFIG_SERIAL_CONSOLE=y
 # CONFIG_SERIAL_UART00_CONSOLE is not set
 # CONFIG_SERIAL_SA1100 is not set
 # CONFIG_SERIAL_SA1100_CONSOLE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_UNIX98_PTY_COUNT=256
 CONFIG_PRINTER=m
@@ -615,17 +694,13 @@ CONFIG_PRINTER=m
 # Mice
 #
 # CONFIG_BUSMOUSE is not set
-CONFIG_MOUSE=y
 CONFIG_PSMOUSE=y
-# CONFIG_82C710_MOUSE is not set
-# CONFIG_PC110_PAD is not set
 # CONFIG_QIC02_TAPE is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 CONFIG_RTC=y
 # CONFIG_DTLK is not set
@@ -638,6 +713,7 @@ CONFIG_RTC=y
 # CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
 # Multimedia devices
@@ -648,6 +724,8 @@ CONFIG_RTC=y
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_REISERFS_FS is not set
@@ -711,6 +789,7 @@ CONFIG_NFS_FS=y
 # CONFIG_NFSD_TCP is not set
 CONFIG_SUNRPC=y
 CONFIG_LOCKD=y
+# CONFIG_EXPORTFS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_NCPFS_PACKET_SIGNING is not set
@@ -741,6 +820,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 # CONFIG_SMB_NLS is not set
 CONFIG_NLS=y
 
@@ -769,6 +849,7 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
@@ -788,8 +869,6 @@ CONFIG_NLS_ISO8859_1=y
 #
 # Console drivers
 #
-CONFIG_PC_KEYB=y
-CONFIG_PC_KEYMAP=y
 # CONFIG_VGA_CONSOLE is not set
 
 #
@@ -797,7 +876,6 @@ CONFIG_PC_KEYMAP=y
 #
 CONFIG_FB=y
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FB_RIVA is not set
 # CONFIG_FB_CLGEN is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_PM3 is not set
@@ -806,6 +884,7 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FB_CLPS711X is not set
 # CONFIG_FB_SA1100 is not set
 CONFIG_FB_CYBER2000=y
+# CONFIG_FB_RIVA is not set
 # CONFIG_FB_MATROX is not set
 # CONFIG_FB_ATY is not set
 # CONFIG_FB_RADEON is not set
@@ -814,6 +893,8 @@ CONFIG_FB_CYBER2000=y
 # CONFIG_FB_NEOMAGIC is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_PM3 is not set
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FBCON_ADVANCED is not set
 CONFIG_FBCON_CFB8=y
@@ -903,6 +984,8 @@ CONFIG_SOUND_SB=m
 # Console Switches
 #
 # CONFIG_SWITCHES is not set
+# CONFIG_SWITCHES_SA1100 is not set
+# CONFIG_SWITCHES_UCB1X00 is not set
 
 #
 # USB support
@@ -931,6 +1014,11 @@ CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_DC21285_PORT is not set
 # CONFIG_DEBUG_CLPS711X_UART2 is not set
 
+#
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y
+
 #
 # Library routines
 #

arch/arm/kernel/arthur.c

@@ -17,7 +17,6 @@
 #include <linux/personality.h>
 #include <linux/stddef.h>
 #include <linux/signal.h>
-#include <linux/sched.h>
 #include <linux/init.h>
 
 #include <asm/ptrace.h>
@@ -64,13 +63,13 @@ static void arthur_lcall7(int nr, struct pt_regs *regs)
 }
 
 static struct exec_domain arthur_exec_domain = {
-	"Arthur",	/* name */
-	arthur_lcall7,
-	PER_RISCOS, PER_RISCOS,
-	arthur_to_linux_signals,
-	linux_to_arthur_signals,
-	THIS_MODULE,
-	NULL		/* Nothing after this in the list. */
+	.name		= "Arthur",
+	.handler	= arthur_lcall7,
+	.pers_low	= PER_RISCOS,
+	.pers_high	= PER_RISCOS,
+	.signal_map	= arthur_to_linux_signals,
+	.signal_invmap	= linux_to_arthur_signals,
+	.module		= THIS_MODULE,
 };
 
 /*
@@ -78,12 +77,12 @@ static struct exec_domain arthur_exec_domain = {
  * processes are using it.
  */
 
-int __init arthur_init(void)
+static int __init arthur_init(void)
 {
 	return register_exec_domain(&arthur_exec_domain);
 }
 
-void __exit arthur_exit(void)
+static void __exit arthur_exit(void)
 {
 	unregister_exec_domain(&arthur_exec_domain);
 }

arch/arm/kernel/via82c505.c

@@ -20,7 +20,7 @@ static int
 via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 		      int size, u32 *value)
 {
-	outl(CONFIG_CMD(dev,where),0xCF8);
+	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
 	switch (size) {
 	case 1:
 		*value=inb(0xCFC + (where&3));
@@ -36,7 +36,7 @@ via82c505_read_config(struct pci_bus *bus, unsigned int devfn, int where,
 }
 
 static int
-via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where
+via82c505_write_config(struct pci_bus *bus, unsigned int devfn, int where,
 		       int size, u32 value)
 {
 	outl(CONFIG_CMD(bus,devfn,where),0xCF8);
@@ -61,8 +61,6 @@ static struct pci_ops via82c505_ops = {
 
 void __init via82c505_preinit(void *sysdata)
 {
-	struct pci_bus *bus;
-
 	printk(KERN_DEBUG "PCI: VIA 82c505\n");
 	if (!request_region(0xA8,2,"via config")) {
 		printk(KERN_WARNING"VIA 82c505: Unable to request region 0xA8\n");

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -305,7 +305,7 @@ static struct cpufreq_driver sa1110_driver = {
 	.verify		 = sa11x0_verify_speed,
 	.setpolicy	 = sa1110_setspeed,
 	.policy		 = &sa1110_policy,
-	.cpu_min_freq[0] = 59000,
+	.cpu_min_freq	 = { 59000, },
 };
 
 static int __init sa1110_clk_init(void)

arch/arm/mach-sa1100/generic.h

@@ -21,5 +21,5 @@ extern void sa1110_mb_disable(void);
 struct cpufreq_policy;
 
 extern unsigned int sa11x0_freq_to_ppcr(unsigned int khz);
-extern void sa11x0_verify_speed(struct cpufreq_policy *policy);
+extern int sa11x0_verify_speed(struct cpufreq_policy *policy);
 extern unsigned int sa11x0_getspeed(void);

arch/arm/mach-sa1100/sa1111-pcibuf.c

@@ -31,6 +31,14 @@
 #define DPRINTK(...) do { } while (0)
 #endif
 
+//#define STATS
+#ifdef STATS
+#define DO_STATS(X) do { X ; } while (0)
+#else
+#define DO_STATS(X) do { } while (0)
+#endif
+
+/* ************************************************** */
 
 struct safe_buffer {
 	struct list_head node;
@@ -50,10 +58,24 @@ LIST_HEAD(safe_buffers);
 
 
 #define SIZE_SMALL	1024
-#define SIZE_LARGE	(16*1024)
+#define SIZE_LARGE	(4*1024)
 
 static struct pci_pool *small_buffer_pool, *large_buffer_pool;
 
+#ifdef STATS
+static unsigned long sbp_allocs __initdata = 0;
+static unsigned long lbp_allocs __initdata = 0;
+static unsigned long total_allocs __initdata= 0;
+
+static void print_alloc_stats(void)
+{
+	printk(KERN_INFO
+	       "sa1111_pcibuf: sbp: %lu, lbp: %lu, other: %lu, total: %lu\n",
+	       sbp_allocs, lbp_allocs,
+	       total_allocs - sbp_allocs - lbp_allocs, total_allocs);
+}
+#endif
+
 static int __init
 create_safe_buffer_pools(void)
 {
@@ -81,6 +103,10 @@ create_safe_buffer_pools(void)
 		return -1;
 	}
 
+	printk(KERN_INFO
+	       "sa1111_pcibuf: buffer sizes: small=%u, large=%u\n",
+	       SIZE_SMALL, SIZE_LARGE);
+
 	return 0;
 }
 
@@ -108,6 +134,8 @@ alloc_safe_buffer(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
 	DPRINTK("%s(ptr=%p, size=%d, direction=%d)\n",
 		__func__, ptr, size, direction);
 
+	DO_STATS ( total_allocs++ );
+
 	buf = kmalloc(sizeof(struct safe_buffer), GFP_ATOMIC);
 	if (buf == 0) {
 		printk(KERN_WARNING "%s: kmalloc failed\n", __func__);
@@ -117,12 +145,14 @@ alloc_safe_buffer(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
 	if (size <= SIZE_SMALL) {
 		pool = small_buffer_pool;
 		safe = pci_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
+
+		DO_STATS ( sbp_allocs++ );
 	} else if (size <= SIZE_LARGE) {
 		pool = large_buffer_pool;
 		safe = pci_pool_alloc(pool, GFP_ATOMIC, &safe_dma_addr);
+
+		DO_STATS ( lbp_allocs++ );
 	} else {
-		printk(KERN_DEBUG
-		       "sa111_pcibuf: resorting to pci_alloc_consistent\n");
 		pool = 0;
 		safe = pci_alloc_consistent(SA1111_FAKE_PCIDEV, size,
 					    &safe_dma_addr);
@@ -136,6 +166,11 @@ alloc_safe_buffer(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
 		return 0;
 	}
 
+#ifdef STATS
+	if (total_allocs % 1000 == 0)
+		print_alloc_stats();
+#endif
+
 	BUG_ON(sa1111_check_dma_bug(safe_dma_addr));	// paranoia
 
 	buf->ptr = ptr;
@@ -204,37 +239,39 @@ dma_range_is_safe(dma_addr_t addr, size_t size)
 	return ((physaddr + size - 1) < (1<<20));
 }
 
-/*
- * see if a buffer address is in an 'unsafe' range.  if it is
- * allocate a 'safe' buffer and copy the unsafe buffer into it.
- * substitute the safe buffer for the unsafe one.
- * (basically move the buffer from an unsafe area to a safe one)
- */
-dma_addr_t
-sa1111_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
-{
-	unsigned long flags;
-	dma_addr_t dma_addr;
+/* ************************************************** */
 
-	DPRINTK("%s(hwdev=%p,ptr=%p,size=%d,dir=%x)\n",
-	       __func__, hwdev, ptr, size, direction);
+#ifdef STATS
+static unsigned long map_op_count __initdata = 0;
+static unsigned long bounce_count __initdata = 0;
 
-	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
-	BUG_ON(direction == PCI_DMA_NONE);
+static void print_map_stats(void)
+{
+	printk(KERN_INFO
+	       "sa1111_pcibuf: map_op_count=%lu, bounce_count=%lu\n",
+	       map_op_count, bounce_count);
+}
+#endif
 
-	local_irq_save(flags);
+static dma_addr_t
+map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
+{
+	dma_addr_t dma_addr;
+
+	DO_STATS ( map_op_count++ );
 
 	dma_addr = virt_to_bus(ptr);
 
 	if (!dma_range_is_safe(dma_addr, size)) {
 		struct safe_buffer *buf;
 
+		DO_STATS ( bounce_count++ ) ;
+
 		buf = alloc_safe_buffer(hwdev, ptr, size, direction);
 		if (buf == 0) {
 			printk(KERN_ERR
 			       "%s: unable to map unsafe buffer %p!\n",
 			       __func__, ptr);
-			local_irq_restore(flags);
 			return 0;
 		}
 
@@ -256,33 +293,22 @@ sa1111_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
 		consistent_sync(ptr, size, direction);
 	}
 
-	local_irq_restore(flags);
+#ifdef STATS
+	if (map_op_count % 1000 == 0)
+		print_map_stats();
+#endif
+
 	return dma_addr;
 }
 
-/*
- * see if a mapped address was really a "safe" buffer and if so, copy
- * the data from the safe buffer back to the unsafe buffer and free up
- * the safe buffer.  (basically return things back to the way they
- * should be)
- */
-
-void
-sa1111_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+static void
+unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 	     size_t size, int direction)
 {
-	unsigned long flags;
 	struct safe_buffer *buf;
 
-	DPRINTK("%s(hwdev=%p,ptr=%p,size=%d,dir=%x)\n",
-		__func__, hwdev, (void *) dma_addr, size, direction);
-
-	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
-	BUG_ON(direction == PCI_DMA_NONE);
-
-	local_irq_save(flags);
-
 	buf = find_safe_buffer(dma_addr);
+
 	if (buf) {
 		BUG_ON(buf->size != size);
 		BUG_ON(buf->direction != direction);
@@ -292,6 +318,9 @@ sa1111_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 			buf->ptr, (void *) virt_to_bus(buf->ptr),
 			buf->safe, (void *) buf->safe_dma_addr);
 
+
+		DO_STATS ( bounce_count++ );
+
 		if ((direction == PCI_DMA_FROMDEVICE) ||
 		    (direction == PCI_DMA_BIDIRECTIONAL)) {
 			DPRINTK("%s: copy back from safe %p, to unsafe %p size %d\n",
@@ -300,39 +329,16 @@ sa1111_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 		}
 		free_safe_buffer(buf);
 	}
-
-	local_irq_restore(flags);
 }
 
-int
-sa1111_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-	      int nents, int direction)
-{
-	BUG();			/* Not implemented. */
-}
-
-void
-sa1111_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents,
-	     int direction)
-{
-	BUG();			/* Not implemented. */
-}
-
-void
-sa1111_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+static void
+sync_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 		       size_t size, int direction)
 {
-	unsigned long flags;
 	struct safe_buffer *buf;
 
-	DPRINTK("%s(hwdev=%p,ptr=%p,size=%d,dir=%x)\n",
-		__func__, hwdev, (void *) dma_addr, size, direction);
-
-	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
-
-	local_irq_save(flags);
-
 	buf = find_safe_buffer(dma_addr);
+
 	if (buf) {
 		BUG_ON(buf->size != size);
 		BUG_ON(buf->direction != direction);
@@ -342,6 +348,8 @@ sa1111_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 			buf->ptr, (void *) virt_to_bus(buf->ptr),
 			buf->safe, (void *) buf->safe_dma_addr);
 
+		DO_STATS ( bounce_count++ );
+
 		switch (direction) {
 		case PCI_DMA_FROMDEVICE:
 			DPRINTK("%s: copy back from safe %p, to unsafe %p size %d\n",
@@ -362,15 +370,159 @@ sa1111_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
 	} else {
 		consistent_sync(bus_to_virt(dma_addr), size, direction);
 	}
+}
+
+/* ************************************************** */
+
+/*
+ * see if a buffer address is in an 'unsafe' range.  if it is
+ * allocate a 'safe' buffer and copy the unsafe buffer into it.
+ * substitute the safe buffer for the unsafe one.
+ * (basically move the buffer from an unsafe area to a safe one)
+ */
+dma_addr_t
+sa1111_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction)
+{
+	unsigned long flags;
+	dma_addr_t dma_addr;
+
+	DPRINTK("%s(hwdev=%p,ptr=%p,size=%d,dir=%x)\n",
+	       __func__, hwdev, ptr, size, direction);
+
+	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
+	BUG_ON(direction == PCI_DMA_NONE);
+
+	local_irq_save(flags);
+
+	dma_addr = map_single(hwdev, ptr, size, direction);
+
+	local_irq_restore(flags);
+
+	return dma_addr;
+}
+
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer.  (basically return things back to the way they
+ * should be)
+ */
+
+void
+sa1111_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+		    size_t size, int direction)
+{
+	unsigned long flags;
+
+	DPRINTK("%s(hwdev=%p,ptr=%p,size=%d,dir=%x)\n",
+		__func__, hwdev, (void *) dma_addr, size, direction);
+
+	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
+	BUG_ON(direction == PCI_DMA_NONE);
+
+	local_irq_save(flags);
+
+	unmap_single(hwdev, dma_addr, size, direction);
+
+	local_irq_restore(flags);
+}
+
+int
+sa1111_map_sg(struct pci_dev *hwdev, struct scatterlist *sg,
+	      int nents, int direction)
+{
+	unsigned long flags;
+	int i;
+
+	DPRINTK("%s(hwdev=%p,sg=%p,nents=%d,dir=%x)\n",
+		__func__, hwdev, sg, nents, direction);
+
+	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
+	BUG_ON(direction == PCI_DMA_NONE);
+
+	local_irq_save(flags);
+
+	for (i = 0; i < nents; i++, sg++) {
+		struct page *page = sg->page;
+		unsigned int offset = sg->offset;
+		unsigned int length = sg->length;
+		void *ptr = page_address(page) + offset;
+
+		sg->dma_address =
+			map_single(hwdev, ptr, length, direction);
+	}
+
+	local_irq_restore(flags);
+
+	return nents;
+}
+
+void
+sa1111_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents,
+	     int direction)
+{
+	unsigned long flags;
+	int i;
+
+	DPRINTK("%s(hwdev=%p,sg=%p,nents=%d,dir=%x)\n",
+		__func__, hwdev, sg, nents, direction);
+
+	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
+	BUG_ON(direction == PCI_DMA_NONE);
+
+	local_irq_save(flags);
+
+	for (i = 0; i < nents; i++, sg++) {
+		dma_addr_t dma_addr = sg->dma_address;
+		unsigned int length = sg->length;
+
+		unmap_single(hwdev, dma_addr, length, direction);
+	}
+
+	local_irq_restore(flags);
+}
+
+void
+sa1111_dma_sync_single(struct pci_dev *hwdev, dma_addr_t dma_addr,
+		       size_t size, int direction)
+{
+	unsigned long flags;
+
+	DPRINTK("%s(hwdev=%p,ptr=%p,size=%d,dir=%x)\n",
+		__func__, hwdev, (void *) dma_addr, size, direction);
+
+	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
+
+	local_irq_save(flags);
+
+	sync_single(hwdev, dma_addr, size, direction);
 
 	local_irq_restore(flags);
 }
 
 void
 sa1111_dma_sync_sg(struct pci_dev *hwdev, struct scatterlist *sg,
-		   int nelems, int direction)
+		   int nents, int direction)
 {
-	BUG();			/* Not implemented. */
+	unsigned long flags;
+	int i;
+
+	DPRINTK("%s(hwdev=%p,sg=%p,nents=%d,dir=%x)\n",
+		__func__, hwdev, sg, nents, direction);
+
+	BUG_ON(hwdev != SA1111_FAKE_PCIDEV);
+	BUG_ON(direction == PCI_DMA_NONE);
+
+	local_irq_save(flags);
+
+	for (i = 0; i < nents; i++, sg++) {
+		dma_addr_t dma_addr = sg->dma_address;
+		unsigned int length = sg->length;
+
+		sync_single(hwdev, dma_addr, length, direction);
+	}
+
+	local_irq_restore(flags);
 }
 
 EXPORT_SYMBOL(sa1111_map_single);
@@ -399,6 +551,11 @@ static void __exit sa1111_pcibuf_exit(void)
 {
 	BUG_ON(!list_empty(&safe_buffers));
 
+#ifdef STATS
+	print_alloc_stats();
+	print_map_stats();
+#endif
+
 	destroy_safe_buffer_pools();
 }
 module_exit(sa1111_pcibuf_exit);

drivers/acorn/char/Makefile

@@ -2,7 +2,6 @@
 # Makefile for the acorn character device drivers.
 #
 
-# All the objects that export symbols.
 obj-arc		:= keyb_arc.o defkeymap-acorn.o
 
 obj-$(CONFIG_ARCH_ACORN)	+= i2c.o pcf8583.o

drivers/acorn/scsi/acornscsi.c

@@ -137,10 +137,10 @@
 #include <linux/signal.h>
 #include <linux/errno.h>
 #include <linux/proc_fs.h>
-#include <linux/stat.h>
 #include <linux/ioport.h>
 #include <linux/blk.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/bitops.h>

drivers/acorn/scsi/arxescsi.h

-/*
- * ARXE SCSI card driver
- *
- * Copyright (C) 1997-2000 Russell King
- *
- * Changes to support ARXE 16-bit SCSI card by Stefan Hanske
- */
-#ifndef ARXE_SCSI_H
-#define ARXE_SCSI_H
-
-#define MANU_ARXE 	0x0041
-#define PROD_ARXE_SCSI	0x00be
-
-extern int arxescsi_detect (Scsi_Host_Template *);
-extern int arxescsi_release (struct Scsi_Host *);
-extern const char *arxescsi_info (struct Scsi_Host *);
-extern int arxescsi_proc_info (char *buffer, char **start, off_t offset,
-				int length, int hostno, int inout);
-
-#ifndef NULL
-#define NULL ((void *)0)
-#endif
-
-#ifndef CAN_QUEUE
-/*
- * Default queue size
- */
-#define CAN_QUEUE	1
-#endif
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN	1
-#endif
-
-#ifndef SCSI_ID
-/*
- * Default SCSI host ID
- */
-#define SCSI_ID		7
-#endif
-
-#include <scsi/scsicam.h>
-
-#include "fas216.h"
-
-#define ARXEScsi {					\
-proc_info:			arxescsi_proc_info,	\
-name:				"ARXE SCSI card",	\
-detect:				arxescsi_detect,	\
-release:			arxescsi_release,	\
-info:				arxescsi_info,		\
-can_queue:			CAN_QUEUE,		\
-this_id:			SCSI_ID,		\
-sg_tablesize:			SG_ALL,			\
-cmd_per_lun:			CMD_PER_LUN,		\
-use_clustering:			DISABLE_CLUSTERING,	\
-command:			fas216_command,		\
-queuecommand:			fas216_queue_command,	\
-eh_host_reset_handler:		fas216_eh_host_reset,	\
-eh_bus_reset_handler:		fas216_eh_bus_reset,	\
-eh_device_reset_handler:	fas216_eh_device_reset,	\
-eh_abort_handler:		fas216_eh_abort,	\
-	}
-
-#ifndef HOSTS_C
-
-typedef struct {
-    FAS216_Info info;
-
-    /* other info... */
-    unsigned int	cstatus;	/* card status register	*/
-    unsigned int	dmaarea;	/* Pseudo DMA area	*/
-} ARXEScsi_Info;
-
-#define CSTATUS_IRQ	(1 << 0)
-#define CSTATUS_DRQ	(1 << 0)
-
-#endif /* HOSTS_C */
-
-#endif /* ARXE_SCSI_H */

drivers/acorn/scsi/cumana_2.c

@@ -23,10 +23,8 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/unistd.h>
-#include <linux/stat.h>
 #include <linux/delay.h>
-#include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/dma.h>

drivers/acorn/scsi/eesox.c

@@ -29,10 +29,8 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/unistd.h>
-#include <linux/stat.h>
 #include <linux/delay.h>
-#include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/io.h>

drivers/acorn/scsi/fas216.c

@@ -44,8 +44,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/unistd.h>
-#include <linux/stat.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 

drivers/acorn/scsi/powertec.c

@@ -14,10 +14,8 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
-#include <linux/unistd.h>
-#include <linux/stat.h>
 #include <linux/delay.h>
-#include <linux/pci.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/dma.h>

drivers/pcmcia/sa1100_assabet.c

@@ -6,13 +6,14 @@
  */
 #include <linux/config.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/errno.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/arch/assabet.h>
 
 #include "sa1100_generic.h"

drivers/pcmcia/sa1100_badge4.c

@@ -31,40 +31,41 @@
  *
  * PCM Vcc:
  *
- *  PCM Vcc on BadgePAD 4 can be jumpered for 3.3V (short pins 1 and 3
- *  on JP6) or 5V (short pins 3 and 5 on JP6).  N.B., 5V supply rail
- *  is enabled by the SA-1110's BADGE4_GPIO_PCMEN5V (GPIO 24).
+ *  PCM Vcc on BadgePAD 4 can be jumpered for 3v3 (short pins 1 and 3
+ *  on JP6) or 5v0 (short pins 3 and 5 on JP6).
  *
  * PCM Vpp:
  *
- *  PCM Vpp on BadgePAD 4 can be jumpered for 12V (short pins 2 and 4
- *  on JP6) or tied to PCM Vcc (short pins 4 and 6 on JP6).  N.B., 12V
- *  operation requires that the power supply actually supply 12V.
+ *  PCM Vpp on BadgePAD 4 can be jumpered for 12v0 (short pins 4 and 6
+ *  on JP6) or tied to PCM Vcc (short pins 2 and 4 on JP6).  N.B.,
+ *  12v0 operation requires that the power supply actually supply 12v0
+ *  via pin 7 of JP7.
  *
  * CF Vcc:
  *
- *  CF Vcc on BadgePAD 4 can be jumpered either for 3.3V (short pins 1
- *  and 2 on JP10) or 5V (short pins 2 and 3 on JP10).  The note above
- *  about the 5V supply rail applies.
+ *  CF Vcc on BadgePAD 4 can be jumpered either for 3v3 (short pins 1
+ *  and 2 on JP10) or 5v0 (short pins 2 and 3 on JP10).
  *
- * There's no way programmatically to determine how a given board is
- * jumpered.  This code assumes a default jumpering: 5V PCM Vcc (pins
- * 3 and 5 shorted) and PCM Vpp = PCM Vcc (pins 4 and 6 shorted) and
- * no jumpering for CF Vcc.  If this isn't correct, Override these
- * defaults with a pcmv setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf
- * vcc>.  E.g. pcmv=33,120,50 indicates 3.3V PCM Vcc, 12.0V PCM Vpp,
- * and 5.0V CF Vcc.
+ * Unfortunately there's no way programmatically to determine how a
+ * given board is jumpered.  This code assumes a default jumpering
+ * as described below.
+ *
+ * If the defaults aren't correct, you may override them with a pcmv
+ * setup argument: pcmv=<pcm vcc>,<pcm vpp>,<cf vcc>.  The units are
+ * tenths of volts; e.g. pcmv=33,120,50 indicates 3v3 PCM Vcc, 12v0
+ * PCM Vpp, and 5v0 CF Vcc.
  *
  */
 
-static int badge4_pcmvcc = 50;
-static int badge4_pcmvpp = 50;
-static int badge4_cfvcc = 33;
+static int badge4_pcmvcc = 50;  /* pins 3 and 5 jumpered on JP6 */
+static int badge4_pcmvpp = 50;  /* pins 2 and 4 jumpered on JP6 */
+static int badge4_cfvcc = 33;   /* pins 1 and 2 jumpered on JP10 */
 
 static int badge4_pcmcia_init(struct pcmcia_init *init)
 {
-	printk(KERN_INFO __FUNCTION__
-	       ": badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
+	printk(KERN_INFO
+	       "%s: badge4_pcmvcc=%d, badge4_pcmvpp=%d, badge4_cfvcc=%d\n",
+	       __FUNCTION__,
 	       badge4_pcmvcc, badge4_pcmvpp, badge4_cfvcc);
 
 	return sa1111_pcmcia_init(init);
@@ -74,7 +75,7 @@ static int badge4_pcmcia_shutdown(void)
 {
 	int rc = sa1111_pcmcia_shutdown();
 
-	/* be sure to disable 5V use */
+	/* be sure to disable 5v0 use */
 	badge4_set_5V(BADGE4_5V_PCMCIA_SOCK0, 0);
 	badge4_set_5V(BADGE4_5V_PCMCIA_SOCK1, 0);
 
@@ -105,7 +106,8 @@ badge4_pcmcia_configure_socket(const struct pcmcia_configure *conf)
 		    (conf->vcc != badge4_pcmvcc)) {
 			complain_about_jumpering(__FUNCTION__, "pcmvcc",
 						 badge4_pcmvcc, conf->vcc);
-			return -1;
+			// Apply power regardless of the jumpering.
+			// return -1;
 		}
 		if ((conf->vpp != 0) &&
 		    (conf->vpp != badge4_pcmvpp)) {
@@ -156,7 +158,7 @@ static struct pcmcia_low_level badge4_pcmcia_ops = {
 	.socket_suspend		= sa1111_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_badge4_init(void)
+int pcmcia_badge4_init(void)
 {
 	int ret = -ENODEV;
 
@@ -166,7 +168,7 @@ int __init pcmcia_badge4_init(void)
 	return ret;
 }
 
-void __exit pcmcia_badge4_exit(void)
+void __devexit pcmcia_badge4_exit(void)
 {
 	sa1100_unregister_pcmcia(&badge4_pcmcia_ops);
 }

drivers/pcmcia/sa1111_generic.c

@@ -7,9 +7,9 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/ioport.h>
 #include <linux/device.h>
+#include <linux/interrupt.h>
 #include <linux/init.h>
 
 #include <asm/hardware.h>

drivers/serial/8250_acorn.c

@@ -55,8 +55,6 @@ static int __devinit serial_card_probe(struct expansion_card *ec, const struct e
 	unsigned long cardaddr, address;
 	int port;
 
-	ecard_claim (ec);
-
 	info = kmalloc(sizeof(struct serial_card_info), GFP_KERNEL);
 	if (!info)
 		return -ENOMEM;
@@ -64,6 +62,8 @@ static int __devinit serial_card_probe(struct expansion_card *ec, const struct e
 	memset(info, 0, sizeof(struct serial_card_info));
 	info->num_ports = type->num_ports;
 
+	ecard_set_drvdata(ec, info);
+
 	cardaddr = ecard_address(ec, type->type, type->speed);
 
 	for (port = 0; port < info->num_ports; port ++) {
@@ -98,8 +98,6 @@ static void __devexit serial_card_remove(struct expansion_card *ec)
 	}
 
 	kfree(info);
-
-	ecard_release(ec);
 }
 
 static struct serial_card_type atomwide_type = {

include/asm-arm/arch-shark/ide.h

@@ -42,6 +42,6 @@ ide_init_default_hwifs(void)
 
 	ide_init_hwif_ports(&hw, 0x1f0, 0x3f6, NULL);
 	hw.irq = 14;
-	ide_register_hw(&hw);
+	ide_register_hw(&hw,NULL);
 }
 

include/asm-arm/arch-shark/irqs.h

@@ -7,5 +7,6 @@
 #define NR_IRQS			16
 
 #define IRQ_ISA_KEYBOARD	 1
+#define RTC_IRQ			 8
 #define AUX_IRQ			12
 #define IRQ_HARDDISK            14

include/asm-arm/arch-shark/memory.h

@@ -38,6 +38,4 @@
 #define __bus_to_virt__is_a_macro
 #define __bus_to_virt(x)	__phys_to_virt(x)
 
-#define isa_virt_to_bus		virt_to_bus
-
 #endif

include/asm-arm/arch-shark/timex.h

@@ -3,3 +3,5 @@
  *
  * by Alexander Schulz
  */
+
+#define CLOCK_TICK_RATE 1193180

include/asm-arm/proc-armv/elf.h

@@ -13,7 +13,7 @@
 
 #define ELF_THUMB_OK(x) \
 	(( (elf_hwcap & HWCAP_THUMB) && ((x)->e_entry & 1) == 1) || \
-	 (!(elf_hwcap & HWCAP_THUMB) && ((x)->e_entry & 3) == 0))
+	 ((x)->e_entry & 3) == 0)
 
 #define ELF_26BIT_OK(x) \
 	(( (elf_hwcap & HWCAP_26BIT) && (x)->e_flags & EF_ARM_APCS26) || \

include/asm-arm/suspend.h

-#ifdef _ASMARM_SUSPEND_H
+#ifndef _ASMARM_SUSPEND_H
 #define _ASMARM_SUSPEND_H
 
 #endif

sound/oss/vidc_fill.S

@@ -9,7 +9,6 @@
  *
  *  Filler routines for DMA buffers
  */
-#define __ASSEMBLY__
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/hardware.h>