tmscsim: replace by am53c974 driver

The am53c974 is a re-implementation of the tmscsim driver,
and provides the same functionality.
So remove the tmscsim driver and make am53c974 an alias to tmscsim.
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

MAINTAINERS

@@ -2862,11 +2862,10 @@ F:	Documentation/networking/dmfe.txt
 F:	drivers/net/ethernet/dec/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-M:	Kurt Garloff <garloff@suse.de>
-W:	http://www.garloff.de/kurt/linux/dc390/
-M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+M:	Hannes Reinecke <hare@suse.de>
+L:	linux-scsi@vger.kernel.org
 S:	Maintained
-F:	drivers/scsi/tmscsim.*
+F:	drivers/scsi/am53c974.c
 
 DC395x SCSI driver
 M:	Oliver Neukum <oliver@neukum.org>

drivers/scsi/Kconfig

@@ -1341,22 +1341,6 @@ config SCSI_DC395x
 	  To compile this driver as a module, choose M here: the
 	  module will be called dc395x.
 
-config SCSI_DC390T
-	tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
-	depends on PCI && SCSI
-	---help---
-	  This driver supports PCI SCSI host adapters based on the Am53C974A
-	  chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
-	  PCscsi/PCnet (Am53/79C974) solutions.
-
-	  Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
-
-	  Note that this driver does NOT support Tekram DC390W/U/F, which are
-	  based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tmscsim.
-
 config SCSI_AM53C974
 	tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
 	depends on PCI && SCSI

drivers/scsi/Makefile

@@ -100,7 +100,6 @@ obj-$(CONFIG_SCSI_EATA_PIO)	+= eata_pio.o
 obj-$(CONFIG_SCSI_7000FASST)	+= wd7000.o
 obj-$(CONFIG_SCSI_EATA)		+= eata.o
 obj-$(CONFIG_SCSI_DC395x)	+= dc395x.o
-obj-$(CONFIG_SCSI_DC390T)	+= tmscsim.o
 obj-$(CONFIG_SCSI_AM53C974)	+= esp_scsi.o	am53c974.o
 obj-$(CONFIG_MEGARAID_LEGACY)	+= megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/

drivers/scsi/am53c974.c

@@ -574,6 +574,7 @@ MODULE_DESCRIPTION("AM53C974 SCSI driver");
 MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_ALIAS("tmscsim");
 
 module_param(am53c974_debug, bool, 0644);
 MODULE_PARM_DESC(am53c974_debug, "Enable debugging");