Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (36 commits)
  ide: re-add TRM290 fix lost during ide_build_dmatable() cleanup
  scc_pata: kill unused variables
  sgiioc4: kill duplicate ioremap()
  sgiioc4: kill useless address checks
  delkin_cb: add PM support
  ide: remove broken hpt34x driver
  ide-floppy: remove idefloppy_floppy_t typedef
  sgiioc4: remove maskproc() method
  hpt366: cleanup maskproc() method
  ide: mask interrupt in ide_config_drive_speed()
  hpt366: fix compile warning
  ide: remove unused macros from <asm-parisc/ide.h>
  ide: remove M68K_IDE_SWAPW define from <asm-m68k/ide.h>
  ide: remove dead <asm-arm/arch-sa1100/ide.h>
  ide: fix support for IDE PCI controllers using MMIO on frv
  ide-cd: remove stale comment
  ide-cd: small drive type print fix
  ide-cd: debug log enhancements
  ide: add generic ATA/ATAPI disk driver
  ide: allow device drivers to specify per-device type /proc settings
  ...

arch/arm/mach-sa1100/include/mach/ide.h

-/*
- * arch/arm/mach-sa1100/include/mach/ide.h
- *
- * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
- *
- * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *              Get rid of the special ide_init_hwif_ports() functions
- *              and make a generalised function that can be used by all
- *              architectures.
- */
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#error "This code is broken and needs update to match with current ide support"
-
-
-/*
- * Set up a hw structure for a specified data port, control port and IRQ.
- * This should follow whatever the default interface uses.
- */
-static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-				       unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	int i;
-	int regincr = 1;
-
-	/* The Empeg board has the first two address lines unused */
-	if (machine_is_empeg())
-		regincr = 1 << 2;
-
-	/* The LART doesn't use A0 for IDE */
-	if (machine_is_lart())
-		regincr = 1 << 1;
-
-	memset(hw, 0, sizeof(*hw));
-
-	for (i = 0; i <= 7; i++) {
-		hw->io_ports_array[i] = reg;
-		reg += regincr;
-	}
-
-	hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq)
-		*irq = 0;
-}
-
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-    if (machine_is_lart()) {
-#ifdef CONFIG_SA1100_LART
-        hw_regs_t hw;
-
-        /* Enable GPIO as interrupt line */
-        GPDR &= ~LART_GPIO_IDE;
-	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
-
-        /* set PCMCIA interface timing */
-        MECR = 0x00060006;
-
-        /* init the interface */
-	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
-        hw.irq = LART_IRQ_IDE;
-        ide_register_hw(&hw);
-#endif
-    }
-}

drivers/ide/Kconfig

@@ -84,21 +84,40 @@ config BLK_DEV_IDE_SATA
 
 	  If unsure, say N.
 
-config BLK_DEV_IDEDISK
-	tristate "Include IDE/ATA-2 DISK support"
-	---help---
-	  This will include enhanced support for MFM/RLL/IDE hard disks.  If
-	  you have a MFM/RLL/IDE disk, and there is no special reason to use
-	  the old hard disk driver instead, say Y.  If you have an SCSI-only
-	  system, you can say N here.
+config IDE_GD
+	tristate "generic ATA/ATAPI disk support"
+	default y
+	help
+	  Support for ATA/ATAPI disks (including ATAPI floppy drives).
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called ide-disk.
-	  Do not compile this driver as a module if your root file system
-	  (the one containing the directory /) is located on the IDE disk.
+	  To compile this driver as a module, choose M here.
+	  The module will be called ide-gd_mod.
+
+	  If unsure, say Y.
+
+config IDE_GD_ATA
+	bool "ATA disk support"
+	depends on IDE_GD
+	default y
+	help
+	  This will include support for ATA hard disks.
 
 	  If unsure, say Y.
 
+config IDE_GD_ATAPI
+	bool "ATAPI floppy support"
+	depends on IDE_GD
+	select IDE_ATAPI
+	help
+	  This will include support for ATAPI floppy drives
+	  (i.e. Iomega ZIP or MKE LS-120).
+
+	  For information about jumper settings and the question
+	  of when a ZIP drive uses a partition table, see
+	  <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
+
+	  If unsure, say N.
+
 config BLK_DEV_IDECS
 	tristate "PCMCIA IDE support"
 	depends on PCMCIA
@@ -163,29 +182,6 @@ config BLK_DEV_IDETAPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called ide-tape.
 
-config BLK_DEV_IDEFLOPPY
-	tristate "Include IDE/ATAPI FLOPPY support"
-	select IDE_ATAPI
-	---help---
-	  If you have an IDE floppy drive which uses the ATAPI protocol,
-	  answer Y.  ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
-	  drives, similar to the SCSI protocol.
-
-	  The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by
-	  this driver. For information about jumper settings and the question
-	  of when a ZIP drive uses a partition table, see
-	  <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
-	  (ATAPI PD-CD/CDR drives are not supported by this driver; support
-	  for PD-CD/CDR drives is available if you answer Y to
-	  "SCSI emulation support", below).
-
-	  If you say Y here, the FLOPPY drive will be identified along with
-	  other IDE devices, as "hdb" or "hdc", or something similar (check
-	  the boot messages with dmesg).
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ide-floppy.
-
 config BLK_DEV_IDESCSI
 	tristate "SCSI emulation support (DEPRECATED)"
 	depends on SCSI
@@ -332,7 +328,7 @@ config IDEPCI_PCIBUS_ORDER
 # TODO: split it on per host driver config options (or module parameters)
 config BLK_DEV_OFFBOARD
 	bool "Boot off-board chipsets first support (DEPRECATED)"
-	depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT34X || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
+	depends on BLK_DEV_IDEPCI && (BLK_DEV_AEC62XX || BLK_DEV_GENERIC || BLK_DEV_HPT366 || BLK_DEV_PDC202XX_NEW || BLK_DEV_PDC202XX_OLD || BLK_DEV_TC86C001)
 	help
 	  Normally, IDE controllers built into the motherboard (on-board
 	  controllers) are assigned to ide0 and ide1 while those on add-in PCI
@@ -482,28 +478,6 @@ config BLK_DEV_CS5535
 
 	  It is safe to say Y to this question.
 
-config BLK_DEV_HPT34X
-	tristate "HPT34X chipset support"
-	depends on BROKEN
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This driver adds up to 4 more EIDE devices sharing a single
-	  interrupt. The HPT343 chipset in its current form is a non-bootable
-	  controller; the HPT345/HPT363 chipset is a bootable (needs BIOS FIX)
-	  PCI UDMA controllers. This driver requires dynamic tuning of the
-	  chipset during the ide-probe at boot time. It is reported to support
-	  DVD II drives, by the manufacturer.
-
-config HPT34X_AUTODMA
-	bool "HPT34X AUTODMA support (EXPERIMENTAL)"
-	depends on BLK_DEV_HPT34X && EXPERIMENTAL
-	help
-	  This is a dangerous thing to attempt currently! Please read the
-	  comments at the top of <file:drivers/ide/pci/hpt34x.c>.  If you say Y
-	  here, then say Y to "Use DMA by default when available" as well.
-
-	  If unsure, say N.
-
 config BLK_DEV_HPT366
 	tristate "HPT36X/37X chipset support"
 	select BLK_DEV_IDEDMA_PCI

drivers/ide/Makefile

@@ -37,18 +37,25 @@ obj-$(CONFIG_IDE_H8300)			+= h8300/
 obj-$(CONFIG_IDE_GENERIC)		+= ide-generic.o
 obj-$(CONFIG_BLK_DEV_IDEPNP)		+= ide-pnp.o
 
-ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o
+ide-gd_mod-y += ide-gd.o
 ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
-ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o
 
+ifeq ($(CONFIG_IDE_GD_ATA), y)
+	ide-gd_mod-y += ide-disk.o ide-disk_ioctl.o
 ifeq ($(CONFIG_IDE_PROC_FS), y)
-	ide-disk_mod-y += ide-disk_proc.o
-	ide-floppy_mod-y += ide-floppy_proc.o
+	ide-gd_mod-y += ide-disk_proc.o
+endif
+endif
+
+ifeq ($(CONFIG_IDE_GD_ATAPI), y)
+	ide-gd_mod-y += ide-floppy.o ide-floppy_ioctl.o
+ifeq ($(CONFIG_IDE_PROC_FS), y)
+	ide-gd_mod-y += ide-floppy_proc.o
+endif
 endif
 
-obj-$(CONFIG_BLK_DEV_IDEDISK)		+= ide-disk_mod.o
+obj-$(CONFIG_IDE_GD)			+= ide-gd_mod.o
 obj-$(CONFIG_BLK_DEV_IDECD)		+= ide-cd_mod.o
-obj-$(CONFIG_BLK_DEV_IDEFLOPPY)		+= ide-floppy_mod.o
 obj-$(CONFIG_BLK_DEV_IDETAPE)		+= ide-tape.o
 
 ifeq ($(CONFIG_BLK_DEV_IDECS), y)

drivers/ide/ide-atapi.c

@@ -191,7 +191,7 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
 {
 	struct ide_atapi_pc pc;
 
-	if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK)
+	if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0)
 		return 0;
 
 	ide_init_pc(&pc);

drivers/ide/ide-cd.c

@@ -99,7 +99,7 @@ static void ide_cd_put(struct cdrom_info *cd)
 /* Mark that we've seen a media change and invalidate our internal buffers. */
 static void cdrom_saw_media_change(ide_drive_t *drive)
 {
-	drive->atapi_flags |= IDE_AFLAG_MEDIA_CHANGED;
+	drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
 	drive->atapi_flags &= ~IDE_AFLAG_TOC_VALID;
 }
 
@@ -340,8 +340,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
 	}
 
 	ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, "
-		      "rq->cmd_type: 0x%x, err: 0x%x\n", __func__, stat,
-		      good_stat, rq->cmd_type, err);
+		      "rq->cmd[0]: 0x%x, rq->cmd_type: 0x%x, err: 0x%x\n",
+		      __func__, stat, good_stat, rq->cmd[0], rq->cmd_type, err);
 
 	if (blk_sense_request(rq)) {
 		/*
@@ -843,13 +843,10 @@ static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq)
 	rq->q->prep_rq_fn(rq->q, rq);
 }
 
-/*
- * All other packet commands.
- */
 static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq)
 {
-
-	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+	ide_debug_log(IDE_DBG_FUNC, "Call %s, rq->cmd[0]: 0x%x\n",
+		      __func__, rq->cmd[0]);
 
 	/*
 	 * Some of the trailing request sense fields are optional,
@@ -876,7 +873,7 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
 	if (!sense)
 		sense = &local_sense;
 
-	ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
+	ide_debug_log(IDE_DBG_PC, "Call %s, cmd[0]: 0x%x, write: 0x%x, "
 		      "timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write,
 		      timeout, cmd_flags);
 
@@ -1177,8 +1174,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
 	unsigned short sectors_per_frame =
 		queue_hardsect_size(drive->queue) >> SECTOR_BITS;
 
-	ide_debug_log(IDE_DBG_RQ, "Call %s, write: 0x%x, secs_per_frame: %u\n",
-		      __func__, write, sectors_per_frame);
+	ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
+		      "secs_per_frame: %u\n",
+		      __func__, rq->cmd[0], write, sectors_per_frame);
 
 	if (write) {
 		/* disk has become write protected */
@@ -1221,7 +1219,8 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
 static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 {
 
-	ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd_type: 0x%x\n", __func__,
+	ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, "
+		      "rq->cmd_type: 0x%x\n", __func__, rq->cmd[0],
 		      rq->cmd_type);
 
 	if (blk_pc_request(rq))
@@ -1257,9 +1256,6 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
 	}
 }
 
-/*
- * cdrom driver request routine.
- */
 static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 					sector_t block)
 {
@@ -1267,8 +1263,10 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
 	ide_handler_t *fn;
 	int xferlen;
 
-	ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd_type: 0x%x, block: %llu\n",
-		      __func__, rq->cmd_type, (unsigned long long)block);
+	ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd[0]: 0x%x, "
+		      "rq->cmd_type: 0x%x, block: %llu\n",
+		      __func__, rq->cmd[0], rq->cmd_type,
+		      (unsigned long long)block);
 
 	if (blk_fs_request(rq)) {
 		if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
@@ -1412,6 +1410,10 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
 
 	*capacity = 1 + be32_to_cpu(capbuf.lba);
 	*sectors_per_frame = blocklen >> SECTOR_BITS;
+
+	ide_debug_log(IDE_DBG_PROBE, "%s: cap: %lu, sectors_per_frame: %lu\n",
+		      __func__, *capacity, *sectors_per_frame);
+
 	return 0;
 }
 
@@ -1643,6 +1645,9 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
 		maxspeed = be16_to_cpup((__be16 *)&buf[8 + 8]);
 	}
 
+	ide_debug_log(IDE_DBG_PROBE, "%s: curspeed: %u, maxspeed: %u\n",
+		      __func__, curspeed, maxspeed);
+
 	cd->current_speed = (curspeed + (176/2)) / 176;
 	cd->max_speed = (maxspeed + (176/2)) / 176;
 }
@@ -1732,7 +1737,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 		return 0;
 
 	if ((buf[8 + 6] & 0x01) == 0)
-		drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
 	if (buf[8 + 6] & 0x08)
 		drive->atapi_flags &= ~IDE_AFLAG_NO_EJECT;
 	if (buf[8 + 3] & 0x01)
@@ -1777,7 +1782,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
 	if ((cdi->mask & CDC_DVD_R) == 0 || (cdi->mask & CDC_DVD_RAM) == 0)
 		printk(KERN_CONT " DVD%s%s",
 				 (cdi->mask & CDC_DVD_R) ? "" : "-R",
-				 (cdi->mask & CDC_DVD_RAM) ? "" : "-RAM");
+				 (cdi->mask & CDC_DVD_RAM) ? "" : "/RAM");
 
 	if ((cdi->mask & CDC_CD_R) == 0 || (cdi->mask & CDC_CD_RW) == 0)
 		printk(KERN_CONT " CD%s%s",
@@ -1908,6 +1913,16 @@ static const struct ide_proc_devset idecd_settings[] = {
 	IDE_PROC_DEVSET(dsc_overlap, 0, 1),
 	{ 0 },
 };
+
+static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive)
+{
+	return idecd_proc;
+}
+
+static const struct ide_proc_devset *ide_cd_proc_devsets(ide_drive_t *drive)
+{
+	return idecd_settings;
+}
 #endif
 
 static const struct cd_list_entry ide_cd_quirks_list[] = {
@@ -1986,8 +2001,8 @@ static int ide_cdrom_setup(ide_drive_t *drive)
 	if (!drive->queue->unplug_delay)
 		drive->queue->unplug_delay = 1;
 
-	drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
-		       ide_cd_flags(id);
+	drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
+	drive->atapi_flags = IDE_AFLAG_NO_EJECT | ide_cd_flags(id);
 
 	if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
 	    fw_rev[4] == '1' && fw_rev[6] <= '2')
@@ -2069,8 +2084,8 @@ static ide_driver_t ide_cdrom_driver = {
 	.end_request		= ide_end_request,
 	.error			= __ide_error,
 #ifdef CONFIG_IDE_PROC_FS
-	.proc			= idecd_proc,
-	.settings		= idecd_settings,
+	.proc_entries		= ide_cd_proc_entries,
+	.proc_devsets		= ide_cd_proc_devsets,
 #endif
 };
 

drivers/ide/ide-cd_ioctl.c

@@ -86,8 +86,8 @@ int ide_cdrom_check_media_change_real(struct cdrom_device_info *cdi,
 
 	if (slot_nr == CDSL_CURRENT) {
 		(void) cdrom_check_status(drive, NULL);
-		retval = (drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED) ? 1 : 0;
-		drive->atapi_flags &= ~IDE_AFLAG_MEDIA_CHANGED;
+		retval = (drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED) ? 1 : 0;
+		drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
 		return retval;
 	} else {
 		return -EINVAL;
@@ -136,7 +136,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 		sense = &my_sense;
 
 	/* If the drive cannot lock the door, just pretend. */
-	if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK) {
+	if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) == 0) {
 		stat = 0;
 	} else {
 		unsigned char cmd[BLK_MAX_CDB];
@@ -157,7 +157,7 @@ int ide_cd_lockdoor(ide_drive_t *drive, int lockflag,
 	    (sense->asc == 0x24 || sense->asc == 0x20)) {
 		printk(KERN_ERR "%s: door locking not supported\n",
 			drive->name);
-		drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
 		stat = 0;
 	}
 

drivers/ide/ide-disk.h

 #ifndef __IDE_DISK_H
 #define __IDE_DISK_H
 
-struct ide_disk_obj {
-	ide_drive_t	*drive;
-	ide_driver_t	*driver;
-	struct gendisk	*disk;
-	struct kref	kref;
-	unsigned int	openers;	/* protected by BKL for now */
-};
-
-#define ide_disk_g(disk) \
-	container_of((disk)->private_data, struct ide_disk_obj, driver)
+#include "ide-gd.h"
 
+#ifdef CONFIG_IDE_GD_ATA
 /* ide-disk.c */
-sector_t ide_disk_capacity(ide_drive_t *);
+extern const struct ide_disk_ops ide_ata_disk_ops;
 ide_decl_devset(address);
 ide_decl_devset(multcount);
 ide_decl_devset(nowerr);
@@ -21,12 +13,17 @@ ide_decl_devset(wcache);
 ide_decl_devset(acoustic);
 
 /* ide-disk_ioctl.c */
-int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+int ide_disk_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
+		   unsigned long);
 
 #ifdef CONFIG_IDE_PROC_FS
 /* ide-disk_proc.c */
 extern ide_proc_entry_t ide_disk_proc[];
 extern const struct ide_proc_devset ide_disk_settings[];
 #endif
+#else
+#define ide_disk_proc		NULL
+#define ide_disk_settings	NULL
+#endif
 
 #endif /* __IDE_DISK_H */

drivers/ide/ide-disk_ioctl.c

@@ -13,12 +13,10 @@ static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
 { 0 }
 };
 
-int ide_disk_ioctl(struct inode *inode, struct file *file,
+int ide_disk_ioctl(ide_drive_t *drive, struct inode *inode, struct file *file,
 		   unsigned int cmd, unsigned long arg)
 {
 	struct block_device *bdev = inode->i_bdev;
-	struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
-	ide_drive_t *drive = idkp->drive;
 	int err;
 
 	err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);

drivers/ide/ide-disk_proc.c

@@ -56,7 +56,7 @@ static int proc_idedisk_read_capacity
 	ide_drive_t*drive = (ide_drive_t *)data;
 	int len;
 
-	len = sprintf(page, "%llu\n", (long long)ide_disk_capacity(drive));
+	len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive));
 
 	PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
 }

drivers/ide/ide-dma-sff.c

@@ -130,7 +130,7 @@ int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
 			xcount = bcount & 0xffff;
 			if (is_trm290)
 				xcount = ((xcount >> 2) - 1) << 16;
-			if (xcount == 0x0000) {
+			else if (xcount == 0x0000) {
 				if (count++ >= PRD_ENTRIES)
 					goto use_pio_instead;
 				*table++ = cpu_to_le32(0x8000);

drivers/ide/ide-floppy.h

 #ifndef __IDE_FLOPPY_H
 #define __IDE_FLOPPY_H
 
-/*
- * Most of our global data which we need to save even as we leave the driver
- * due to an interrupt or a timer event is stored in a variable of type
- * idefloppy_floppy_t, defined below.
- */
-typedef struct ide_floppy_obj {
-	ide_drive_t	*drive;
-	ide_driver_t	*driver;
-	struct gendisk	*disk;
-	struct kref	kref;
-	unsigned int	openers;	/* protected by BKL for now */
-
-	/* Last failed packet command */
-	struct ide_atapi_pc *failed_pc;
-	/* used for blk_{fs,pc}_request() requests */
-	struct ide_atapi_pc queued_pc;
-
-	/* Last error information */
-	u8 sense_key, asc, ascq;
-
-	int progress_indication;
-
-	/* Device information */
-	/* Current format */
-	int blocks, block_size, bs_factor;
-	/* Last format capacity descriptor */
-	u8 cap_desc[8];
-	/* Copy of the flexible disk page */
-	u8 flexible_disk_page[32];
-} idefloppy_floppy_t;
+#include "ide-gd.h"
 
+#ifdef CONFIG_IDE_GD_ATAPI
 /*
  * Pages of the SELECT SENSE / MODE SENSE packet commands.
  * See SFF-8070i spec.
@@ -46,17 +18,22 @@ typedef struct ide_floppy_obj {
 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS	0x4603
 
 /* ide-floppy.c */
+extern const struct ide_disk_ops ide_atapi_disk_ops;
 void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
 void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
-sector_t ide_floppy_capacity(ide_drive_t *);
 
 /* ide-floppy_ioctl.c */
-int ide_floppy_ioctl(struct inode *, struct file *, unsigned, unsigned long);
+int ide_floppy_ioctl(ide_drive_t *, struct inode *, struct file *, unsigned int,
+		     unsigned long);
 
 #ifdef CONFIG_IDE_PROC_FS
 /* ide-floppy_proc.c */
 extern ide_proc_entry_t ide_floppy_proc[];
 extern const struct ide_proc_devset ide_floppy_settings[];
 #endif
+#else
+#define ide_floppy_proc		NULL
+#define ide_floppy_settings	NULL
+#endif
 
 #endif /*__IDE_FLOPPY_H */

drivers/ide/ide-floppy_ioctl.c

@@ -33,7 +33,7 @@
 
 static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg)
 {
-	struct ide_floppy_obj *floppy = drive->driver_data;
+	struct ide_disk_obj *floppy = drive->driver_data;
 	struct ide_atapi_pc pc;
 	u8 header_len, desc_cnt;
 	int i, blocks, length, u_array_size, u_index;
@@ -113,7 +113,7 @@ static void ide_floppy_create_format_unit_cmd(struct ide_atapi_pc *pc, int b,
 
 static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
 {
-	idefloppy_floppy_t *floppy = drive->driver_data;
+	struct ide_disk_obj *floppy = drive->driver_data;
 	struct ide_atapi_pc pc;
 
 	drive->atapi_flags &= ~IDE_AFLAG_SRFP;
@@ -132,17 +132,17 @@ static int ide_floppy_get_sfrp_bit(ide_drive_t *drive)
 
 static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
 {
-	idefloppy_floppy_t *floppy = drive->driver_data;
+	struct ide_disk_obj *floppy = drive->driver_data;
 	struct ide_atapi_pc pc;
 	int blocks, length, flags, err = 0;
 
 	if (floppy->openers > 1) {
 		/* Don't format if someone is using the disk */
-		drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
+		drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
 		return -EBUSY;
 	}
 
-	drive->atapi_flags |= IDE_AFLAG_FORMAT_IN_PROGRESS;
+	drive->dev_flags |= IDE_DFLAG_FORMAT_IN_PROGRESS;
 
 	/*
 	 * Send ATAPI_FORMAT_UNIT to the drive.
@@ -174,7 +174,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
 
 out:
 	if (err)
-		drive->atapi_flags &= ~IDE_AFLAG_FORMAT_IN_PROGRESS;
+		drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
 	return err;
 }
 
@@ -190,7 +190,7 @@ static int ide_floppy_format_unit(ide_drive_t *drive, int __user *arg)
 
 static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
 {
-	idefloppy_floppy_t *floppy = drive->driver_data;
+	struct ide_disk_obj *floppy = drive->driver_data;
 	struct ide_atapi_pc pc;
 	int progress_indication = 0x10000;
 
@@ -226,7 +226,7 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
 static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
 			       unsigned long arg, unsigned int cmd)
 {
-	idefloppy_floppy_t *floppy = drive->driver_data;
+	struct ide_disk_obj *floppy = drive->driver_data;
 	struct gendisk *disk = floppy->disk;
 	int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
 
@@ -260,13 +260,10 @@ static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
 	}
 }
 
-int ide_floppy_ioctl(struct inode *inode, struct file *file,
-		    unsigned int cmd, unsigned long arg)
+int ide_floppy_ioctl(ide_drive_t *drive, struct inode *inode,
+		     struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct block_device *bdev = inode->i_bdev;
-	struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
-						     ide_floppy_obj);
-	ide_drive_t *drive = floppy->drive;
 	struct ide_atapi_pc pc;
 	void __user *argp = (void __user *)arg;
 	int err;

drivers/ide/ide-floppy_proc.c

@@ -9,7 +9,7 @@ static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
 	ide_drive_t*drive = (ide_drive_t *)data;
 	int len;
 
-	len = sprintf(page, "%llu\n", (long long)ide_floppy_capacity(drive));
+	len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive));
 	PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
 }
 

drivers/ide/ide-gd.c

+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/genhd.h>
+#include <linux/mutex.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
+#define IDE_DISK_MINORS		(1 << PARTN_BITS)
+#else
+#define IDE_DISK_MINORS		0
+#endif
+
+#include "ide-disk.h"
+#include "ide-floppy.h"
+
+#define IDE_GD_VERSION	"1.18"
+
+/* module parameters */
+static unsigned long debug_mask;
+module_param(debug_mask, ulong, 0644);
+
+static DEFINE_MUTEX(ide_disk_ref_mutex);
+
+static void ide_disk_release(struct kref *);
+
+static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
+{
+	struct ide_disk_obj *idkp = NULL;
+
+	mutex_lock(&ide_disk_ref_mutex);
+	idkp = ide_drv_g(disk, ide_disk_obj);
+	if (idkp) {
+		if (ide_device_get(idkp->drive))
+			idkp = NULL;
+		else
+			kref_get(&idkp->kref);
+	}
+	mutex_unlock(&ide_disk_ref_mutex);
+	return idkp;
+}
+
+static void ide_disk_put(struct ide_disk_obj *idkp)
+{
+	ide_drive_t *drive = idkp->drive;
+
+	mutex_lock(&ide_disk_ref_mutex);
+	kref_put(&idkp->kref, ide_disk_release);
+	ide_device_put(drive);
+	mutex_unlock(&ide_disk_ref_mutex);
+}
+
+sector_t ide_gd_capacity(ide_drive_t *drive)
+{
+	return drive->capacity64;
+}
+
+static int ide_gd_probe(ide_drive_t *);
+
+static void ide_gd_remove(ide_drive_t *drive)
+{
+	struct ide_disk_obj *idkp = drive->driver_data;
+	struct gendisk *g = idkp->disk;
+
+	ide_proc_unregister_driver(drive, idkp->driver);
+
+	del_gendisk(g);
+
+	drive->disk_ops->flush(drive);
+
+	ide_disk_put(idkp);
+}
+
+static void ide_disk_release(struct kref *kref)
+{
+	struct ide_disk_obj *idkp = to_ide_drv(kref, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+	struct gendisk *g = idkp->disk;
+
+	drive->disk_ops = NULL;
+	drive->driver_data = NULL;
+	g->private_data = NULL;
+	put_disk(g);
+	kfree(idkp);
+}
+
+/*
+ * On HPA drives the capacity needs to be
+ * reinitilized on resume otherwise the disk
+ * can not be used and a hard reset is required
+ */
+static void ide_gd_resume(ide_drive_t *drive)
+{
+	if (ata_id_hpa_enabled(drive->id))
+		(void)drive->disk_ops->get_capacity(drive);
+}
+
+static void ide_gd_shutdown(ide_drive_t *drive)
+{
+#ifdef	CONFIG_ALPHA
+	/* On Alpha, halt(8) doesn't actually turn the machine off,
+	   it puts you into the sort of firmware monitor. Typically,
+	   it's used to boot another kernel image, so it's not much
+	   different from reboot(8). Therefore, we don't need to
+	   spin down the disk in this case, especially since Alpha
+	   firmware doesn't handle disks in standby mode properly.
+	   On the other hand, it's reasonably safe to turn the power
+	   off when the shutdown process reaches the firmware prompt,
+	   as the firmware initialization takes rather long time -
+	   at least 10 seconds, which should be sufficient for
+	   the disk to expire its write cache. */
+	if (system_state != SYSTEM_POWER_OFF) {
+#else
+	if (system_state == SYSTEM_RESTART) {
+#endif
+		drive->disk_ops->flush(drive);
+		return;
+	}
+
+	printk(KERN_INFO "Shutdown: %s\n", drive->name);
+
+	drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
+}
+
+#ifdef CONFIG_IDE_PROC_FS
+static ide_proc_entry_t *ide_disk_proc_entries(ide_drive_t *drive)
+{
+	return (drive->media == ide_disk) ? ide_disk_proc : ide_floppy_proc;
+}
+
+static const struct ide_proc_devset *ide_disk_proc_devsets(ide_drive_t *drive)
+{
+	return (drive->media == ide_disk) ? ide_disk_settings
+					  : ide_floppy_settings;
+}
+#endif
+
+static ide_startstop_t ide_gd_do_request(ide_drive_t *drive,
+					 struct request *rq, sector_t sector)
+{
+	return drive->disk_ops->do_request(drive, rq, sector);
+}
+
+static int ide_gd_end_request(ide_drive_t *drive, int uptodate, int nrsecs)
+{
+	return drive->disk_ops->end_request(drive, uptodate, nrsecs);
+}
+
+static ide_driver_t ide_gd_driver = {
+	.gen_driver = {
+		.owner		= THIS_MODULE,
+		.name		= "ide-gd",
+		.bus		= &ide_bus_type,
+	},
+	.probe			= ide_gd_probe,
+	.remove			= ide_gd_remove,
+	.resume			= ide_gd_resume,
+	.shutdown		= ide_gd_shutdown,
+	.version		= IDE_GD_VERSION,
+	.do_request		= ide_gd_do_request,
+	.end_request		= ide_gd_end_request,
+	.error			= __ide_error,
+#ifdef CONFIG_IDE_PROC_FS
+	.proc_entries		= ide_disk_proc_entries,
+	.proc_devsets		= ide_disk_proc_devsets,
+#endif
+};
+
+static int ide_gd_open(struct inode *inode, struct file *filp)
+{
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct ide_disk_obj *idkp;
+	ide_drive_t *drive;
+	int ret = 0;
+
+	idkp = ide_disk_get(disk);
+	if (idkp == NULL)
+		return -ENXIO;
+
+	drive = idkp->drive;
+
+	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
+	idkp->openers++;
+
+	if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
+		drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
+		/* Just in case */
+
+		ret = drive->disk_ops->init_media(drive, disk);
+
+		/*
+		 * Allow O_NDELAY to open a drive without a disk, or with an
+		 * unreadable disk, so that we can get the format capacity
+		 * of the drive or begin the format - Sam
+		 */
+		if (ret && (filp->f_flags & O_NDELAY) == 0) {
+			ret = -EIO;
+			goto out_put_idkp;
+		}
+
+		if ((drive->dev_flags & IDE_DFLAG_WP) && (filp->f_mode & 2)) {
+			ret = -EROFS;
+			goto out_put_idkp;
+		}
+
+		/*
+		 * Ignore the return code from door_lock,
+		 * since the open() has already succeeded,
+		 * and the door_lock is irrelevant at this point.
+		 */
+		drive->disk_ops->set_doorlock(drive, disk, 1);
+		drive->dev_flags |= IDE_DFLAG_MEDIA_CHANGED;
+		check_disk_change(inode->i_bdev);
+	} else if (drive->dev_flags & IDE_DFLAG_FORMAT_IN_PROGRESS) {
+		ret = -EBUSY;
+		goto out_put_idkp;
+	}
+	return 0;
+
+out_put_idkp:
+	idkp->openers--;
+	ide_disk_put(idkp);
+	return ret;
+}
+
+static int ide_gd_release(struct inode *inode, struct file *filp)
+{
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+
+	ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
+	if (idkp->openers == 1)
+		drive->disk_ops->flush(drive);
+
+	if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
+		drive->disk_ops->set_doorlock(drive, disk, 0);
+		drive->dev_flags &= ~IDE_DFLAG_FORMAT_IN_PROGRESS;
+	}
+
+	idkp->openers--;
+
+	ide_disk_put(idkp);
+
+	return 0;
+}
+
+static int ide_gd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+{
+	struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+
+	geo->heads = drive->bios_head;
+	geo->sectors = drive->bios_sect;
+	geo->cylinders = (u16)drive->bios_cyl; /* truncate */
+	return 0;
+}
+
+static int ide_gd_media_changed(struct gendisk *disk)
+{
+	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+	int ret;
+
+	/* do not scan partitions twice if this is a removable device */
+	if (drive->dev_flags & IDE_DFLAG_ATTACH) {
+		drive->dev_flags &= ~IDE_DFLAG_ATTACH;
+		return 0;
+	}
+
+	ret = !!(drive->dev_flags & IDE_DFLAG_MEDIA_CHANGED);
+	drive->dev_flags &= ~IDE_DFLAG_MEDIA_CHANGED;
+
+	return ret;
+}
+
+static int ide_gd_revalidate_disk(struct gendisk *disk)
+{
+	struct ide_disk_obj *idkp = ide_drv_g(disk, ide_disk_obj);
+	set_capacity(disk, ide_gd_capacity(idkp->drive));
+	return 0;
+}
+
+static int ide_gd_ioctl(struct inode *inode, struct file *file,
+			     unsigned int cmd, unsigned long arg)
+{
+	struct block_device *bdev = inode->i_bdev;
+	struct ide_disk_obj *idkp = ide_drv_g(bdev->bd_disk, ide_disk_obj);
+	ide_drive_t *drive = idkp->drive;
+
+	return drive->disk_ops->ioctl(drive, inode, file, cmd, arg);
+}
+
+static struct block_device_operations ide_gd_ops = {
+	.owner			= THIS_MODULE,
+	.open			= ide_gd_open,
+	.release		= ide_gd_release,
+	.ioctl			= ide_gd_ioctl,
+	.getgeo			= ide_gd_getgeo,
+	.media_changed		= ide_gd_media_changed,
+	.revalidate_disk	= ide_gd_revalidate_disk
+};
+
+static int ide_gd_probe(ide_drive_t *drive)
+{
+	const struct ide_disk_ops *disk_ops = NULL;
+	struct ide_disk_obj *idkp;
+	struct gendisk *g;
+
+	/* strstr("foo", "") is non-NULL */
+	if (!strstr("ide-gd", drive->driver_req))
+		goto failed;
+
+#ifdef CONFIG_IDE_GD_ATA
+	if (drive->media == ide_disk)
+		disk_ops = &ide_ata_disk_ops;
+#endif
+#ifdef CONFIG_IDE_GD_ATAPI
+	if (drive->media == ide_floppy)
+		disk_ops = &ide_atapi_disk_ops;
+#endif
+	if (disk_ops == NULL)
+		goto failed;
+
+	if (disk_ops->check(drive, DRV_NAME) == 0) {
+		printk(KERN_ERR PFX "%s: not supported by this driver\n",
+			drive->name);
+		goto failed;
+	}
+
+	idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
+	if (!idkp) {
+		printk(KERN_ERR PFX "%s: can't allocate a disk structure\n",
+			drive->name);
+		goto failed;
+	}
+
+	g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif));
+	if (!g)
+		goto out_free_idkp;
+
+	ide_init_disk(g, drive);
+
+	kref_init(&idkp->kref);
+
+	idkp->drive = drive;
+	idkp->driver = &ide_gd_driver;
+	idkp->disk = g;
+
+	g->private_data = &idkp->driver;
+
+	drive->driver_data = idkp;
+	drive->debug_mask = debug_mask;
+	drive->disk_ops = disk_ops;
+
+	disk_ops->setup(drive);
+
+	set_capacity(g, ide_gd_capacity(drive));
+
+	g->minors = IDE_DISK_MINORS;
+	g->driverfs_dev = &drive->gendev;
+	g->flags |= GENHD_FL_EXT_DEVT;
+	if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
+		g->flags = GENHD_FL_REMOVABLE;
+	g->fops = &ide_gd_ops;
+	add_disk(g);
+	return 0;
+
+out_free_idkp:
+	kfree(idkp);
+failed:
+	return -ENODEV;
+}
+
+static int __init ide_gd_init(void)
+{
+	printk(KERN_INFO DRV_NAME " driver " IDE_GD_VERSION "\n");
+	return driver_register(&ide_gd_driver.gen_driver);
+}
+
+static void __exit ide_gd_exit(void)
+{
+	driver_unregister(&ide_gd_driver.gen_driver);
+}
+
+MODULE_ALIAS("ide:*m-disk*");
+MODULE_ALIAS("ide-disk");
+MODULE_ALIAS("ide:*m-floppy*");
+MODULE_ALIAS("ide-floppy");
+module_init(ide_gd_init);
+module_exit(ide_gd_exit);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("generic ATA/ATAPI disk driver");

drivers/ide/ide-gd.h

+#ifndef __IDE_GD_H
+#define __IDE_GD_H
+
+#define DRV_NAME "ide-gd"
+#define PFX DRV_NAME ": "
+
+/* define to see debug info */
+#define IDE_GD_DEBUG_LOG	0
+
+#if IDE_GD_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#else
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
+#endif
+
+struct ide_disk_obj {
+	ide_drive_t	*drive;
+	ide_driver_t	*driver;
+	struct gendisk	*disk;
+	struct kref	kref;
+	unsigned int	openers;	/* protected by BKL for now */
+
+	/* Last failed packet command */
+	struct ide_atapi_pc *failed_pc;
+	/* used for blk_{fs,pc}_request() requests */
+	struct ide_atapi_pc queued_pc;
+
+	/* Last error information */
+	u8 sense_key, asc, ascq;
+
+	int progress_indication;
+
+	/* Device information */
+	/* Current format */
+	int blocks, block_size, bs_factor;
+	/* Last format capacity descriptor */
+	u8 cap_desc[8];
+	/* Copy of the flexible disk page */
+	u8 flexible_disk_page[32];
+};
+
+sector_t ide_gd_capacity(ide_drive_t *);
+
+#endif /* __IDE_GD_H */

drivers/ide/ide-iops.c

@@ -755,7 +755,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
 	 
 	udelay(1);
 	SELECT_DRIVE(drive);
-	SELECT_MASK(drive, 0);
+	SELECT_MASK(drive, 1);
 	udelay(1);
 	tp_ops->set_irq(hwif, 0);
 

drivers/ide/ide-probe.c

@@ -208,6 +208,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
 		drive->ready_stat = 0;
 		if (ata_id_cdb_intr(id))
 			drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
+		drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
 		/* we don't do head unloading on ATAPI devices */
 		drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
 		return;

drivers/ide/ide-proc.c

@@ -567,10 +567,10 @@ static void ide_remove_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t
 void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver)
 {
 	mutex_lock(&ide_setting_mtx);
-	drive->settings = driver->settings;
+	drive->settings = driver->proc_devsets(drive);
 	mutex_unlock(&ide_setting_mtx);
 
-	ide_add_proc_entries(drive->proc, driver->proc, drive);
+	ide_add_proc_entries(drive->proc, driver->proc_entries(drive), drive);
 }
 
 EXPORT_SYMBOL(ide_proc_register_driver);
@@ -591,7 +591,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
 {
 	unsigned long flags;
 
-	ide_remove_proc_entries(drive->proc, driver->proc);
+	ide_remove_proc_entries(drive->proc, driver->proc_entries(drive));
 
 	mutex_lock(&ide_setting_mtx);
 	spin_lock_irqsave(&ide_lock, flags);

drivers/ide/ide-tape.c

@@ -2108,7 +2108,7 @@ static void idetape_get_mode_sense_results(ide_drive_t *drive)
 
 	/* device lacks locking support according to capabilities page */
 	if ((caps[6] & 1) == 0)
-		drive->atapi_flags |= IDE_AFLAG_NO_DOORLOCK;
+		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
 
 	if (caps[7] & 0x02)
 		tape->blk_size = 512;
@@ -2298,6 +2298,16 @@ static ide_proc_entry_t idetape_proc[] = {
 	{ "name",	S_IFREG|S_IRUGO,	proc_idetape_read_name,	NULL },
 	{ NULL, 0, NULL, NULL }
 };
+
+static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive)
+{
+	return idetape_proc;
+}
+
+static const struct ide_proc_devset *ide_tape_proc_devsets(ide_drive_t *drive)
+{
+	return idetape_settings;
+}
 #endif
 
 static int ide_tape_probe(ide_drive_t *);
@@ -2315,8 +2325,8 @@ static ide_driver_t idetape_driver = {
 	.end_request		= idetape_end_request,
 	.error			= __ide_error,
 #ifdef CONFIG_IDE_PROC_FS
-	.proc			= idetape_proc,
-	.settings		= idetape_settings,
+	.proc_entries		= ide_tape_proc_entries,
+	.proc_devsets		= ide_tape_proc_devsets,
 #endif
 };
 

drivers/ide/pci/Makefile

@@ -11,7 +11,6 @@ obj-$(CONFIG_BLK_DEV_CS5535)		+= cs5535.o
 obj-$(CONFIG_BLK_DEV_SC1200)		+= sc1200.o
 obj-$(CONFIG_BLK_DEV_CY82C693)		+= cy82c693.o
 obj-$(CONFIG_BLK_DEV_DELKIN)		+= delkin_cb.o
-obj-$(CONFIG_BLK_DEV_HPT34X)		+= hpt34x.o
 obj-$(CONFIG_BLK_DEV_HPT366)		+= hpt366.o
 obj-$(CONFIG_BLK_DEV_IT8213)		+= it8213.o
 obj-$(CONFIG_BLK_DEV_IT821X)		+= it821x.o

drivers/ide/pci/delkin_cb.c

@@ -46,10 +46,27 @@ static const struct ide_port_ops delkin_cb_port_ops = {
 	.quirkproc		= ide_undecoded_slave,
 };
 
+static unsigned int delkin_cb_init_chipset(struct pci_dev *dev)
+{
+	unsigned long base = pci_resource_start(dev, 0);
+	int i;
+
+	outb(0x02, base + 0x1e);	/* set nIEN to block interrupts */
+	inb(base + 0x17);		/* read status to clear interrupts */
+
+	for (i = 0; i < sizeof(setup); ++i) {
+		if (setup[i])
+			outb(setup[i], base + i);
+	}
+
+	return 0;
+}
+
 static const struct ide_port_info delkin_cb_port_info = {
 	.port_ops		= &delkin_cb_port_ops,
 	.host_flags		= IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
 				  IDE_HFLAG_NO_DMA,
+	.init_chipset		= delkin_cb_init_chipset,
 };
 
 static int __devinit
@@ -57,7 +74,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct ide_host *host;
 	unsigned long base;
-	int i, rc;
+	int rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
 
 	rc = pci_enable_device(dev);
@@ -72,12 +89,8 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 		return rc;
 	}
 	base = pci_resource_start(dev, 0);
-	outb(0x02, base + 0x1e);	/* set nIEN to block interrupts */
-	inb(base + 0x17);		/* read status to clear interrupts */
-	for (i = 0; i < sizeof(setup); ++i) {
-		if (setup[i])
-			outb(setup[i], base + i);
-	}
+
+	delkin_cb_init_chipset(dev);
 
 	memset(&hw, 0, sizeof(hw));
 	ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
@@ -110,6 +123,40 @@ delkin_cb_remove (struct pci_dev *dev)
 	pci_disable_device(dev);
 }
 
+#ifdef CONFIG_PM
+static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	pci_save_state(dev);
+	pci_disable_device(dev);
+	pci_set_power_state(dev, pci_choose_state(dev, state));
+
+	return 0;
+}
+
+static int delkin_cb_resume(struct pci_dev *dev)
+{
+	struct ide_host *host = pci_get_drvdata(dev);
+	int rc;
+
+	pci_set_power_state(dev, PCI_D0);
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		return rc;
+
+	pci_restore_state(dev);
+	pci_set_master(dev);
+
+	if (host->init_chipset)
+		host->init_chipset(dev);
+
+	return 0;
+}
+#else
+#define delkin_cb_suspend NULL
+#define delkin_cb_resume NULL
+#endif
+
 static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
 	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
@@ -122,6 +169,8 @@ static struct pci_driver delkin_cb_pci_driver = {
 	.id_table	= delkin_cb_pci_tbl,
 	.probe		= delkin_cb_probe,
 	.remove		= delkin_cb_remove,
+	.suspend	= delkin_cb_suspend,
+	.resume		= delkin_cb_resume,
 };
 
 static int __init delkin_cb_init(void)

drivers/ide/pci/hpt34x.c

-/*
- * Copyright (C) 1998-2000	Andre Hedrick <andre@linux-ide.org>
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- *
- * 00:12.0 Unknown mass storage controller:
- * Triones Technologies, Inc.
- * Unknown device 0003 (rev 01)
- *
- * hde: UDMA 2 (0x0000 0x0002) (0x0000 0x0010)
- * hdf: UDMA 2 (0x0002 0x0012) (0x0010 0x0030)
- * hde: DMA 2  (0x0000 0x0002) (0x0000 0x0010)
- * hdf: DMA 2  (0x0002 0x0012) (0x0010 0x0030)
- * hdg: DMA 1  (0x0012 0x0052) (0x0030 0x0070)
- * hdh: DMA 1  (0x0052 0x0252) (0x0070 0x00f0)
- *
- * ide-pci.c reference
- *
- * Since there are two cards that report almost identically,
- * the only discernable difference is the values reported in pcicmd.
- * Booting-BIOS card or HPT363 :: pcicmd == 0x07
- * Non-bootable card or HPT343 :: pcicmd == 0x05
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "hpt34x"
-
-#define HPT343_DEBUG_DRIVE_INFO		0
-
-static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)
-{
-	struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-	u32 reg1= 0, tmp1 = 0, reg2 = 0, tmp2 = 0;
-	u8			hi_speed, lo_speed;
-
-	hi_speed = speed >> 4;
-	lo_speed = speed & 0x0f;
-
-	if (hi_speed & 7) {
-		hi_speed = (hi_speed & 4) ? 0x01 : 0x10;
-	} else {
-		lo_speed <<= 5;
-		lo_speed >>= 5;
-	}
-
-	pci_read_config_dword(dev, 0x44, &reg1);
-	pci_read_config_dword(dev, 0x48, &reg2);
-	tmp1 = ((lo_speed << (3*drive->dn)) | (reg1 & ~(7 << (3*drive->dn))));
-	tmp2 = ((hi_speed << drive->dn) | (reg2 & ~(0x11 << drive->dn)));
-	pci_write_config_dword(dev, 0x44, tmp1);
-	pci_write_config_dword(dev, 0x48, tmp2);
-
-#if HPT343_DEBUG_DRIVE_INFO
-	printk("%s: %s drive%d (0x%04x 0x%04x) (0x%04x 0x%04x)" \
-		" (0x%02x 0x%02x)\n",
-		drive->name, ide_xfer_verbose(speed),
-		drive->dn, reg1, tmp1, reg2, tmp2,
-		hi_speed, lo_speed);
-#endif /* HPT343_DEBUG_DRIVE_INFO */
-}
-
-static void hpt34x_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	hpt34x_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-/*
- * If the BIOS does not set the IO base addaress to XX00, 343 will fail.
- */
-#define	HPT34X_PCI_INIT_REG		0x80
-
-static unsigned int init_chipset_hpt34x(struct pci_dev *dev)
-{
-	int i = 0;
-	unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
-	unsigned long hpt_addr[4] = { 0x20, 0x34, 0x28, 0x3c };
-	unsigned long hpt_addr_len[4] = { 7, 3, 7, 3 };
-	u16 cmd;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	if (cmd & PCI_COMMAND_MEMORY)
-		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
-	else
-		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-
-	/*
-	 * Since 20-23 can be assigned and are R/W, we correct them.
-	 */
-	pci_write_config_word(dev, PCI_COMMAND, cmd & ~PCI_COMMAND_IO);
-	for(i=0; i<4; i++) {
-		dev->resource[i].start = (hpt34xIoBase + hpt_addr[i]);
-		dev->resource[i].end = dev->resource[i].start + hpt_addr_len[i];
-		dev->resource[i].flags = IORESOURCE_IO;
-		pci_write_config_dword(dev,
-				(PCI_BASE_ADDRESS_0 + (i * 4)),
-				dev->resource[i].start);
-	}
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-	local_irq_restore(flags);
-
-	return dev->irq;
-}
-
-static const struct ide_port_ops hpt34x_port_ops = {
-	.set_pio_mode		= hpt34x_set_pio_mode,
-	.set_dma_mode		= hpt34x_set_mode,
-};
-
-#define IDE_HFLAGS_HPT34X \
-	(IDE_HFLAG_NO_ATAPI_DMA | \
-	 IDE_HFLAG_NO_DSC | \
-	 IDE_HFLAG_NO_AUTODMA)
-
-static const struct ide_port_info hpt34x_chipsets[] __devinitdata = {
-	{ /* 0: HPT343 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_hpt34x,
-		.port_ops	= &hpt34x_port_ops,
-		.host_flags	= IDE_HFLAGS_HPT34X | IDE_HFLAG_NON_BOOTABLE,
-		.pio_mask	= ATA_PIO5,
-	},
-	{ /* 1: HPT345 */
-		.name		= DRV_NAME,
-		.init_chipset	= init_chipset_hpt34x,
-		.port_ops	= &hpt34x_port_ops,
-		.host_flags	= IDE_HFLAGS_HPT34X | IDE_HFLAG_OFF_BOARD,
-		.pio_mask	= ATA_PIO5,
-#ifdef CONFIG_HPT34X_AUTODMA
-		.swdma_mask	= ATA_SWDMA2,
-		.mwdma_mask	= ATA_MWDMA2,
-		.udma_mask	= ATA_UDMA2,
-#endif
-	}
-};
-
-static int __devinit hpt34x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	const struct ide_port_info *d;
-	u16 pcicmd = 0;
-
-	pci_read_config_word(dev, PCI_COMMAND, &pcicmd);
-
-	d = &hpt34x_chipsets[(pcicmd & PCI_COMMAND_MEMORY) ? 1 : 0];
-
-	return ide_pci_init_one(dev, d, NULL);
-}
-
-static const struct pci_device_id hpt34x_pci_tbl[] = {
-	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
-
-static struct pci_driver hpt34x_pci_driver = {
-	.name		= "HPT34x_IDE",
-	.id_table	= hpt34x_pci_tbl,
-	.probe		= hpt34x_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init hpt34x_ide_init(void)
-{
-	return ide_pci_register_driver(&hpt34x_pci_driver);
-}
-
-static void __exit hpt34x_ide_exit(void)
-{
-	pci_unregister_driver(&hpt34x_pci_driver);
-}
-
-module_init(hpt34x_ide_init);
-module_exit(hpt34x_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for Highpoint 34x IDE");
-MODULE_LICENSE("GPL");

drivers/ide/pci/hpt366.c

@@ -3,7 +3,7 @@
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
  * Portions Copyright (C) 2007		Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2008	MontaVista Software, Inc.
  *
  * Thanks to HighPoint Technologies for their assistance, and hardware.
  * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
@@ -748,26 +748,24 @@ static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
 	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 
-	if (drive->quirk_list) {
-		if (info->chip_type >= HPT370) {
-			u8 scr1 = 0;
-
-			pci_read_config_byte(dev, 0x5a, &scr1);
-			if (((scr1 & 0x10) >> 4) != mask) {
-				if (mask)
-					scr1 |=  0x10;
-				else
-					scr1 &= ~0x10;
-				pci_write_config_byte(dev, 0x5a, scr1);
-			}
-		} else {
+	if (drive->quirk_list == 0)
+		return;
+
+	if (info->chip_type >= HPT370) {
+		u8 scr1 = 0;
+
+		pci_read_config_byte(dev, 0x5a, &scr1);
+		if (((scr1 & 0x10) >> 4) != mask) {
 			if (mask)
-				disable_irq(hwif->irq);
+				scr1 |=  0x10;
 			else
-				enable_irq (hwif->irq);
+				scr1 &= ~0x10;
+			pci_write_config_byte(dev, 0x5a, scr1);
 		}
-	} else
-		outb(ATA_DEVCTL_OBS | (mask ? 2 : 0), hwif->io_ports.ctl_addr);
+	} else if (mask)
+		disable_irq(hwif->irq);
+	else
+		enable_irq(hwif->irq);
 }
 
 /*
@@ -1289,7 +1287,6 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= hpt3xx_get_info(hwif->dev);
 	int serialize		= HPT_SERIALIZE_IO;
 	u8  chip_type		= info->chip_type;

drivers/ide/pci/scc_pata.c

@@ -617,7 +617,6 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
 	unsigned long intmask_port;
 	unsigned long mode_port;
 	unsigned long ecmode_port;
-	unsigned long dma_status_port;
 	u32 reg = 0;
 	struct scc_ports *ports;
 	int rc;
@@ -637,7 +636,6 @@ static int __devinit init_setup_scc(struct pci_dev *dev,
 	intmask_port = dma_base + 0x010;
 	mode_port = ctl_base + 0x024;
 	ecmode_port = ctl_base + 0xf00;
-	dma_status_port = dma_base + 0x004;
 
 	/* controller initialization */
 	reg = 0;
@@ -843,8 +841,6 @@ static u8 scc_cable_detect(ide_hwif_t *hwif)
 
 static void __devinit init_hwif_scc(ide_hwif_t *hwif)
 {
-	struct scc_ports *ports = ide_get_hwifdata(hwif);
-
 	/* PTERADD */
 	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
 

drivers/ide/pci/sgiioc4.c

@@ -101,18 +101,8 @@ sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
 	for (i = 0; i <= 7; i++)
 		hw->io_ports_array[i] = reg + i * 4;
 
-	if (ctrl_port)
-		hw->io_ports.ctl_addr = ctrl_port;
-
-	if (irq_port)
-		hw->io_ports.irq_addr = irq_port;
-}
-
-static void
-sgiioc4_maskproc(ide_drive_t * drive, int mask)
-{
-	writeb(ATA_DEVCTL_OBS | (mask ? 2 : 0),
-	       (void __iomem *)drive->hwif->io_ports.ctl_addr);
+	hw->io_ports.ctl_addr = ctrl_port;
+	hw->io_ports.irq_addr = irq_port;
 }
 
 static int
@@ -310,16 +300,14 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
 	unsigned long port = hwif->io_ports.status_addr;
 	u8 reg = (u8) readb((void __iomem *) port);
 
-	if ((port & 0xFFF) == 0x11C) {	/* Status register of IOC4 */
-		if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
-			unsigned long other_ir = port - 0x110;
-			unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
+	if (!(reg & ATA_BUSY)) {	/* Not busy... check for interrupt */
+		unsigned long other_ir = port - 0x110;
+		unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
 
-			/* Clear the Interrupt, Error bits on the IOC4 */
-			if (intr_reg & 0x03) {
-				writel(0x03, (void __iomem *) other_ir);
-				intr_reg = (u32) readl((void __iomem *) other_ir);
-			}
+		/* Clear the Interrupt, Error bits on the IOC4 */
+		if (intr_reg & 0x03) {
+			writel(0x03, (void __iomem *) other_ir);
+			intr_reg = (u32) readl((void __iomem *) other_ir);
 		}
 	}
 
@@ -332,13 +320,9 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
-	void __iomem *virt_dma_base;
 	int num_ports = sizeof (ioc4_dma_regs_t);
 	void *pad;
 
-	if (dma_base == 0)
-		return -1;
-
 	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
 
 	if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
@@ -348,14 +332,8 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 		return -1;
 	}
 
-	virt_dma_base = ioremap(dma_base, num_ports);
-	if (virt_dma_base == NULL) {
-		printk(KERN_ERR "%s(%s) -- ERROR: unable to map addresses "
-		       "0x%lx to 0x%lx\n", __func__, hwif->name,
-		       dma_base, dma_base + num_ports - 1);
-		goto dma_remap_failure;
-	}
-	hwif->dma_base = (unsigned long) virt_dma_base;
+	hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
+			 IOC4_DMA_OFFSET;
 
 	hwif->sg_max_nents = IOC4_PRD_ENTRIES;
 
@@ -379,9 +357,6 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
 	printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
 
 dma_pci_alloc_failure:
-	iounmap(virt_dma_base);
-
-dma_remap_failure:
 	release_mem_region(dma_base, num_ports);
 
 	return -1;
@@ -563,8 +538,6 @@ static const struct ide_port_ops sgiioc4_port_ops = {
 	.set_dma_mode		= sgiioc4_set_dma_mode,
 	/* reset DMA engine, clear IRQs */
 	.resetproc		= sgiioc4_resetproc,
-	/* mask on/off NIEN register */
-	.maskproc		= sgiioc4_maskproc,
 };
 
 static const struct ide_dma_ops sgiioc4_dma_ops = {

drivers/leds/Kconfig

@@ -179,7 +179,7 @@ config LEDS_TRIGGER_TIMER
 
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
-	depends on LEDS_TRIGGERS && BLK_DEV_IDEDISK
+	depends on LEDS_TRIGGERS && IDE_GD_ATA
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
 	  If unsure, say Y.

drivers/scsi/ide-scsi.c

@@ -343,6 +343,11 @@ static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *r
 }
 
 #ifdef CONFIG_IDE_PROC_FS
+static ide_proc_entry_t idescsi_proc[] = {
+	{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
+	{ NULL, 0, NULL, NULL }
+};
+
 #define ide_scsi_devset_get(name, field) \
 static int get_##name(ide_drive_t *drive) \
 { \
@@ -378,6 +383,16 @@ static const struct ide_proc_devset idescsi_settings[] = {
 	IDE_PROC_DEVSET(transform, 0,	 3),
 	{ 0 },
 };
+
+static ide_proc_entry_t *ide_scsi_proc_entries(ide_drive_t *drive)
+{
+	return idescsi_proc;
+}
+
+static const struct ide_proc_devset *ide_scsi_proc_devsets(ide_drive_t *drive)
+{
+	return idescsi_settings;
+}
 #endif
 
 /*
@@ -419,13 +434,6 @@ static void ide_scsi_remove(ide_drive_t *drive)
 
 static int ide_scsi_probe(ide_drive_t *);
 
-#ifdef CONFIG_IDE_PROC_FS
-static ide_proc_entry_t idescsi_proc[] = {
-	{ "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL },
-	{ NULL, 0, NULL, NULL }
-};
-#endif
-
 static ide_driver_t idescsi_driver = {
 	.gen_driver = {
 		.owner		= THIS_MODULE,
@@ -439,8 +447,8 @@ static ide_driver_t idescsi_driver = {
 	.end_request		= idescsi_end_request,
 	.error                  = idescsi_atapi_error,
 #ifdef CONFIG_IDE_PROC_FS
-	.proc			= idescsi_proc,
-	.settings		= idescsi_settings,
+	.proc_entries		= ide_scsi_proc_entries,
+	.proc_devsets		= ide_scsi_proc_devsets,
 #endif
 };
 

include/asm-frv/ide.h

@@ -18,15 +18,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-/****************************************************************************/
-/*
- * some bits needed for parts of the IDE subsystem to compile
- */
-#define __ide_mm_insw(port, addr, n)	insw((unsigned long) (port), addr, n)
-#define __ide_mm_insl(port, addr, n)	insl((unsigned long) (port), addr, n)
-#define __ide_mm_outsw(port, addr, n)	outsw((unsigned long) (port), addr, n)
-#define __ide_mm_outsl(port, addr, n)	outsl((unsigned long) (port), addr, n)
-
+#include <asm-generic/ide_iops.h>
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_IDE_H */

include/asm-m68k/ide.h

@@ -92,15 +92,6 @@
 #define outsw_swapw(port, addr, n)	raw_outsw_swapw((u16 *)port, addr, n)
 #endif
 
-
-/* Q40 and Atari have byteswapped IDE busses and since many interesting
- * values in the identification string are text, chars and words they
- * happened to be almost correct without swapping.. However *_capacity
- * is needed for drives over 8 GB. RZ */
-#if defined(CONFIG_Q40) || defined(CONFIG_ATARI)
-#define M68K_IDE_SWAPW  (MACH_IS_Q40 || MACH_IS_ATARI)
-#endif
-
 #ifdef CONFIG_BLK_DEV_FALCON_IDE
 #define IDE_ARCH_LOCK
 

include/asm-parisc/ide.h

@@ -13,10 +13,6 @@
 
 #ifdef __KERNEL__
 
-#define ide_request_irq(irq,hand,flg,dev,id)	request_irq((irq),(hand),(flg),(dev),(id))
-#define ide_free_irq(irq,dev_id)		free_irq((irq), (dev_id))
-#define ide_request_region(from,extent,name)	request_region((from), (extent), (name))
-#define ide_release_region(from,extent)		release_region((from), (extent))
 /* Generic I/O and MEMIO string operations.  */
 
 #define __ide_insw	insw

include/linux/ide.h

@@ -461,12 +461,26 @@ struct ide_acpi_drive_link;
 struct ide_acpi_hwif_link;
 #endif
 
+struct ide_drive_s;
+
+struct ide_disk_ops {
+	int		(*check)(struct ide_drive_s *, const char *);
+	int		(*get_capacity)(struct ide_drive_s *);
+	void		(*setup)(struct ide_drive_s *);
+	void		(*flush)(struct ide_drive_s *);
+	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
+	int		(*set_doorlock)(struct ide_drive_s *, struct gendisk *,
+					int);
+	ide_startstop_t	(*do_request)(struct ide_drive_s *, struct request *,
+				      sector_t);
+	int		(*end_request)(struct ide_drive_s *, int, int);
+	int		(*ioctl)(struct ide_drive_s *, struct inode *,
+				 struct file *, unsigned int, unsigned long);
+};
+
 /* ATAPI device flags */
 enum {
 	IDE_AFLAG_DRQ_INTERRUPT		= (1 << 0),
-	IDE_AFLAG_MEDIA_CHANGED		= (1 << 1),
-	/* Drive cannot lock the door. */
-	IDE_AFLAG_NO_DOORLOCK		= (1 << 2),
 
 	/* ide-cd */
 	/* Drive cannot eject the disc. */
@@ -498,14 +512,10 @@ enum {
 	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 17),
 
 	/* ide-floppy */
-	/* Format in progress */
-	IDE_AFLAG_FORMAT_IN_PROGRESS	= (1 << 18),
 	/* Avoid commands not supported in Clik drive */
 	IDE_AFLAG_CLIK_DRIVE		= (1 << 19),
 	/* Requires BH algorithm for packets */
 	IDE_AFLAG_ZIP_DRIVE		= (1 << 20),
-	/* Write protect */
-	IDE_AFLAG_WP			= (1 << 21),
 	/* Supports format progress report */
 	IDE_AFLAG_SRFP			= (1 << 22),
 
@@ -578,7 +588,11 @@ enum {
 	/* don't unload heads */
 	IDE_DFLAG_NO_UNLOAD		= (1 << 27),
 	/* heads unloaded, please don't reset port */
-	IDE_DFLAG_PARKED		= (1 << 28)
+	IDE_DFLAG_PARKED		= (1 << 28),
+	IDE_DFLAG_MEDIA_CHANGED		= (1 << 29),
+	/* write protect */
+	IDE_DFLAG_WP			= (1 << 30),
+	IDE_DFLAG_FORMAT_IN_PROGRESS	= (1 << 31),
 };
 
 struct ide_drive_s {
@@ -597,6 +611,8 @@ struct ide_drive_s {
 #endif
 	struct hwif_s		*hwif;	/* actually (ide_hwif_t *) */
 
+	const struct ide_disk_ops *disk_ops;
+
 	unsigned long dev_flags;
 
 	unsigned long sleep;		/* sleep until this time */
@@ -1123,8 +1139,8 @@ struct ide_driver_s {
 	void		(*resume)(ide_drive_t *);
 	void		(*shutdown)(ide_drive_t *);
 #ifdef CONFIG_IDE_PROC_FS
-	ide_proc_entry_t		*proc;
-	const struct ide_proc_devset	*settings;
+	ide_proc_entry_t *		(*proc_entries)(ide_drive_t *);
+	const struct ide_proc_devset *	(*proc_devsets)(ide_drive_t *);
 #endif
 };