ARM: dts: omap3: Set disabled status for McBSP instances as default state

In omap3.dtsi disable all mcbsp nodes and board dts files can explicitly
enable the mcbsp they are using.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -234,3 +234,7 @@ &vaux2 {
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };
+
+&mcbsp2 {
+	status = "okay";
+};

arch/arm/boot/dts/omap3-beagle.dts

@@ -211,3 +211,7 @@ &vaux2 {
 	regulator-max-microvolt = <1800000>;
 	regulator-always-on;
 };
+
+&mcbsp2 {
+	status = "okay";
+};

arch/arm/boot/dts/omap3-devkit8000.dts

@@ -101,20 +101,8 @@ &wdt2 {
 	status = "disabled";
 };
 
-&mcbsp1 {
-	status = "disabled";
-};
-
-&mcbsp3 {
-	status = "disabled";
-};
-
-&mcbsp4 {
-	status = "disabled";
-};
-
-&mcbsp5 {
-	status = "disabled";
+&mcbsp2 {
+	status = "okay";
 };
 
 &gpmc {

arch/arm/boot/dts/omap3-igep.dtsi

@@ -170,6 +170,7 @@ &i2c3 {
 &mcbsp2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
 };
 
 &mmc1 {

arch/arm/boot/dts/omap3-overo.dtsi

@@ -95,3 +95,7 @@ &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
 };
+
+&mcbsp2 {
+	status = "okay";
+};

arch/arm/boot/dts/omap3.dtsi

@@ -436,6 +436,7 @@ mcbsp1: mcbsp@48074000 {
 			dmas = <&sdma 31>,
 			       <&sdma 32>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp2: mcbsp@49022000 {
@@ -453,6 +454,7 @@ mcbsp2: mcbsp@49022000 {
 			dmas = <&sdma 33>,
 			       <&sdma 34>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp3: mcbsp@49024000 {
@@ -470,6 +472,7 @@ mcbsp3: mcbsp@49024000 {
 			dmas = <&sdma 17>,
 			       <&sdma 18>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp4: mcbsp@49026000 {
@@ -485,6 +488,7 @@ mcbsp4: mcbsp@49026000 {
 			dmas = <&sdma 19>,
 			       <&sdma 20>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		mcbsp5: mcbsp@48096000 {
@@ -500,6 +504,7 @@ mcbsp5: mcbsp@48096000 {
 			dmas = <&sdma 21>,
 			       <&sdma 22>;
 			dma-names = "tx", "rx";
+			status = "disabled";
 		};
 
 		sham: sham@480c3000 {