Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

arch/arm/mach-pxa/lubbock.c

@@ -29,12 +29,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <asm/hardware/sa1111.h>
+
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/mmc.h>
-#include <asm/hardware/sa1111.h>
 
 #include "generic.h"
 

include/asm-arm/arch-pxa/pxa-regs.h

@@ -444,7 +444,8 @@
  */
 
 /* FIXME: This clash with SA1111 defines */
-#ifndef CONFIG_SA1111
+#ifndef _ASM_ARCH_SA1111
+
 #define SACR0		__REG(0x40400000)  /* Global Control Register */
 #define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
 #define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
@@ -452,7 +453,6 @@
 #define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
 #define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
 #define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
-#endif
 
 #define SACR0_RFTH(x)	(x << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
 #define SACR0_TFTH(x)	(x << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
@@ -461,7 +461,6 @@
 #define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
 #define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
 #define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
-
 #define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
 #define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
 #define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
@@ -476,13 +475,6 @@
 #define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
 #define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
 
-#define SADIV_3_058M	0x0c			/* Serial Clock Divider 3.058MHz */
-#define SADIV_2_836M	0x0d			/* 2.836 MHz */
-#define SADIV_1_405M	0x1a			/* 1.405 MHz */
-#define SADIV_1_026M	0x24			/* 1.026 MHz */
-#define SADIV_702K		0x34			/* 702 kHz */
-#define SADIV_513K		0x48			/* 513 kHz */
-
 #define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
 #define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
 
@@ -491,6 +483,7 @@
 #define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
 #define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
 
+#endif
 
 /*
  * AC97 Controller registers