Skip to content

L
linux
Commit 74017294 authored by Paul Mundt's avatar Paul Mundt Committed by Linus Torvalds
Browse files
Options

[PATCH] sh: SH4-202 microdev updates 

A few trivial updates for the microdev board support code:

	- Update for __IO_PREFIX changes.
	- Consolidate headers into a single microdev.h.
	- Update the microdev_defconfig.
	- Add init values for the S1D13806 used by s1d13xxxfb.
Signed-off-by: default avatarPaul Mundt <lethal@linux-sh.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 4a41cdf9
Hide whitespace changes
Inline Side-by-side
Showing with 536 additions and 347 deletions
arch/sh/boards/superh/microdev/io.c
View file @ 74017294
...@@ -16,7 +16,7 @@ ...@@ -16,7 +16,7 @@
#include <linux/pci.h> #include <linux/pci.h>
#include <linux/wait.h> #include <linux/wait.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/mach/io.h> #include <asm/microdev.h>
/* /*
* we need to have a 'safe' address to re-direct all I/O requests * we need to have a 'safe' address to re-direct all I/O requests
...@@ -52,8 +52,90 @@ ...@@ -52,8 +52,90 @@
#define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */ #define IO_ISP1161_PHYS 0xa7700000ul /* Physical address of Philips ISP1161x USB chip */
#define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */ #define IO_SUPERIO_PHYS 0xa7800000ul /* Physical address of SMSC FDC37C93xAPM SuperIO chip */
#define PORT2ADDR(x) (microdev_isa_port2addr(x)) /*
* map I/O ports to memory-mapped addresses
*/
static unsigned long microdev_isa_port2addr(unsigned long offset)
{
unsigned long result;
if ((offset >= IO_LAN91C111_BASE) &&
(offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
/*
* SMSC LAN91C111 Ethernet chip
*/
result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
} else if ((offset >= IO_SUPERIO_BASE) &&
(offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* Configuration Registers
*/
result = IO_SUPERIO_PHYS + (offset << 1);
#if 0
} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
offset == KBD_STATUS_REG) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
*/
result = IO_SUPERIO_PHYS + (offset << 1);
#endif
} else if (((offset >= IO_IDE1_BASE) &&
(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
(offset == IO_IDE1_MISC)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* IDE #1
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if (((offset >= IO_IDE2_BASE) &&
(offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
(offset == IO_IDE2_MISC)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* IDE #2
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if ((offset >= IO_SERIAL1_BASE) &&
(offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* Serial #1
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if ((offset >= IO_SERIAL2_BASE) &&
(offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* Serial #2
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if ((offset >= IO_ISP1161_BASE) &&
(offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
/*
* Philips USB ISP1161x chip
*/
result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
} else {
/*
* safe default.
*/
printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
__FUNCTION__, offset);
result = PVR;
}
return result;
}
#define PORT2ADDR(x) (microdev_isa_port2addr(x))
static inline void delay(void) static inline void delay(void)
{ {
...@@ -94,6 +176,17 @@ unsigned int microdev_inl(unsigned long port) ...@@ -94,6 +176,17 @@ unsigned int microdev_inl(unsigned long port)
return *(volatile unsigned int*)PORT2ADDR(port); return *(volatile unsigned int*)PORT2ADDR(port);
} }
void microdev_outw(unsigned short b, unsigned long port)
{
#ifdef CONFIG_PCI
if (port >= PCIBIOS_MIN_IO) {
microdev_pci_outw(b, port);
return;
}
#endif
*(volatile unsigned short*)PORT2ADDR(port) = b;
}
void microdev_outb(unsigned char b, unsigned long port) void microdev_outb(unsigned char b, unsigned long port)
{ {
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
...@@ -158,17 +251,6 @@ void microdev_outb(unsigned char b, unsigned long port) ...@@ -158,17 +251,6 @@ void microdev_outb(unsigned char b, unsigned long port)
} }
} }
void microdev_outw(unsigned short b, unsigned long port)
{
#ifdef CONFIG_PCI
if (port >= PCIBIOS_MIN_IO) {
microdev_pci_outw(b, port);
return;
}
#endif
*(volatile unsigned short*)PORT2ADDR(port) = b;
}
void microdev_outl(unsigned int b, unsigned long port) void microdev_outl(unsigned int b, unsigned long port)
{ {
#ifdef CONFIG_PCI #ifdef CONFIG_PCI
...@@ -284,87 +366,3 @@ void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) ...@@ -284,87 +366,3 @@ void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
while (count--) while (count--)
*port_addr = *buf++; *port_addr = *buf++;
} }
/*
* map I/O ports to memory-mapped addresses
*/
unsigned long microdev_isa_port2addr(unsigned long offset)
{
unsigned long result;
if ((offset >= IO_LAN91C111_BASE) &&
(offset < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
/*
* SMSC LAN91C111 Ethernet chip
*/
result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
} else if ((offset >= IO_SUPERIO_BASE) &&
(offset < IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* Configuration Registers
*/
result = IO_SUPERIO_PHYS + (offset << 1);
#if 0
} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
offset == KBD_STATUS_REG) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
*/
result = IO_SUPERIO_PHYS + (offset << 1);
#endif
} else if (((offset >= IO_IDE1_BASE) &&
(offset < IO_IDE1_BASE + IO_IDE_EXTENT)) ||
(offset == IO_IDE1_MISC)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* IDE #1
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if (((offset >= IO_IDE2_BASE) &&
(offset < IO_IDE2_BASE + IO_IDE_EXTENT)) ||
(offset == IO_IDE2_MISC)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* IDE #2
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if ((offset >= IO_SERIAL1_BASE) &&
(offset < IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* Serial #1
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if ((offset >= IO_SERIAL2_BASE) &&
(offset < IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
/*
* SMSC FDC37C93xAPM SuperIO chip
*
* Serial #2
*/
result = IO_SUPERIO_PHYS + (offset << 1);
} else if ((offset >= IO_ISP1161_BASE) &&
(offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
/*
* Philips USB ISP1161x chip
*/
result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
} else {
/*
* safe default.
*/
printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
__FUNCTION__, offset);
result = PVR;
}
return result;
}
arch/sh/boards/superh/microdev/irq.c
View file @ 74017294
...@@ -15,7 +15,7 @@ ...@@ -15,7 +15,7 @@
#include <asm/system.h> #include <asm/system.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/mach/irq.h> #include <asm/microdev.h>
#define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */ #define NUM_EXTERNAL_IRQS 16 /* IRL0 .. IRL15 */
......
arch/sh/boards/superh/microdev/setup.c
View file @ 74017294
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
* *
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
* Copyright (C) 2003, 2004 SuperH, Inc. * Copyright (C) 2003, 2004 SuperH, Inc.
* Copyright (C) 2004 Paul Mundt * Copyright (C) 2004, 2005 Paul Mundt
* *
* SuperH SH4-202 MicroDev board support. * SuperH SH4-202 MicroDev board support.
* *
...@@ -15,11 +15,10 @@ ...@@ -15,11 +15,10 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/ioport.h> #include <linux/ioport.h>
#include <video/s1d13xxxfb.h>
#include <asm/microdev.h>
#include <asm/io.h> #include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/mach/io.h>
#include <asm/machvec.h> #include <asm/machvec.h>
#include <asm/machvec_init.h>
extern void microdev_heartbeat(void); extern void microdev_heartbeat(void);
...@@ -51,8 +50,6 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = { ...@@ -51,8 +50,6 @@ struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_outsw = microdev_outsw, .mv_outsw = microdev_outsw,
.mv_outsl = microdev_outsl, .mv_outsl = microdev_outsl,
.mv_isa_port2addr = microdev_isa_port2addr,
.mv_init_irq = init_microdev_irq, .mv_init_irq = init_microdev_irq,
#ifdef CONFIG_HEARTBEAT #ifdef CONFIG_HEARTBEAT
...@@ -142,16 +139,161 @@ static struct platform_device smc91x_device = { ...@@ -142,16 +139,161 @@ static struct platform_device smc91x_device = {
.resource = smc91x_resources, .resource = smc91x_resources,
}; };
static int __init smc91x_setup(void) #ifdef CONFIG_FB_S1D13XXX
static struct s1d13xxxfb_regval s1d13806_initregs[] = {
{ S1DREG_MISC, 0x00 },
{ S1DREG_COM_DISP_MODE, 0x00 },
{ S1DREG_GPIO_CNF0, 0x00 },
{ S1DREG_GPIO_CNF1, 0x00 },
{ S1DREG_GPIO_CTL0, 0x00 },
{ S1DREG_GPIO_CTL1, 0x00 },
{ S1DREG_CLK_CNF, 0x02 },
{ S1DREG_LCD_CLK_CNF, 0x01 },
{ S1DREG_CRT_CLK_CNF, 0x03 },
{ S1DREG_MPLUG_CLK_CNF, 0x03 },
{ S1DREG_CPU2MEM_WST_SEL, 0x02 },
{ S1DREG_SDRAM_REF_RATE, 0x03 },
{ S1DREG_SDRAM_TC0, 0x00 },
{ S1DREG_SDRAM_TC1, 0x01 },
{ S1DREG_MEM_CNF, 0x80 },
{ S1DREG_PANEL_TYPE, 0x25 },
{ S1DREG_MOD_RATE, 0x00 },
{ S1DREG_LCD_DISP_HWIDTH, 0x63 },
{ S1DREG_LCD_NDISP_HPER, 0x1e },
{ S1DREG_TFT_FPLINE_START, 0x06 },
{ S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
{ S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
{ S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
{ S1DREG_LCD_NDISP_VPER, 0x00 },
{ S1DREG_TFT_FPFRAME_START, 0x0a },
{ S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
{ S1DREG_LCD_DISP_MODE, 0x03 },
{ S1DREG_LCD_MISC, 0x00 },
{ S1DREG_LCD_DISP_START0, 0x00 },
{ S1DREG_LCD_DISP_START1, 0x00 },
{ S1DREG_LCD_DISP_START2, 0x00 },
{ S1DREG_LCD_MEM_OFF0, 0x90 },
{ S1DREG_LCD_MEM_OFF1, 0x01 },
{ S1DREG_LCD_PIX_PAN, 0x00 },
{ S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
{ S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
{ S1DREG_CRT_DISP_HWIDTH, 0x63 },
{ S1DREG_CRT_NDISP_HPER, 0x1f },
{ S1DREG_CRT_HRTC_START, 0x04 },
{ S1DREG_CRT_HRTC_PWIDTH, 0x8f },
{ S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
{ S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
{ S1DREG_CRT_NDISP_VPER, 0x1b },
{ S1DREG_CRT_VRTC_START, 0x00 },
{ S1DREG_CRT_VRTC_PWIDTH, 0x83 },
{ S1DREG_TV_OUT_CTL, 0x10 },
{ S1DREG_CRT_DISP_MODE, 0x05 },
{ S1DREG_CRT_DISP_START0, 0x00 },
{ S1DREG_CRT_DISP_START1, 0x00 },
{ S1DREG_CRT_DISP_START2, 0x00 },
{ S1DREG_CRT_MEM_OFF0, 0x20 },
{ S1DREG_CRT_MEM_OFF1, 0x03 },
{ S1DREG_CRT_PIX_PAN, 0x00 },
{ S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
{ S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
{ S1DREG_LCD_CUR_CTL, 0x00 },
{ S1DREG_LCD_CUR_START, 0x01 },
{ S1DREG_LCD_CUR_XPOS0, 0x00 },
{ S1DREG_LCD_CUR_XPOS1, 0x00 },
{ S1DREG_LCD_CUR_YPOS0, 0x00 },
{ S1DREG_LCD_CUR_YPOS1, 0x00 },
{ S1DREG_LCD_CUR_BCTL0, 0x00 },
{ S1DREG_LCD_CUR_GCTL0, 0x00 },
{ S1DREG_LCD_CUR_RCTL0, 0x00 },
{ S1DREG_LCD_CUR_BCTL1, 0x1f },
{ S1DREG_LCD_CUR_GCTL1, 0x3f },
{ S1DREG_LCD_CUR_RCTL1, 0x1f },
{ S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
{ S1DREG_CRT_CUR_CTL, 0x00 },
{ S1DREG_CRT_CUR_START, 0x01 },
{ S1DREG_CRT_CUR_XPOS0, 0x00 },
{ S1DREG_CRT_CUR_XPOS1, 0x00 },
{ S1DREG_CRT_CUR_YPOS0, 0x00 },
{ S1DREG_CRT_CUR_YPOS1, 0x00 },
{ S1DREG_CRT_CUR_BCTL0, 0x00 },
{ S1DREG_CRT_CUR_GCTL0, 0x00 },
{ S1DREG_CRT_CUR_RCTL0, 0x00 },
{ S1DREG_CRT_CUR_BCTL1, 0x1f },
{ S1DREG_CRT_CUR_GCTL1, 0x3f },
{ S1DREG_CRT_CUR_RCTL1, 0x1f },
{ S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
{ S1DREG_BBLT_CTL0, 0x00 },
{ S1DREG_BBLT_CTL1, 0x00 },
{ S1DREG_BBLT_CC_EXP, 0x00 },
{ S1DREG_BBLT_OP, 0x00 },
{ S1DREG_BBLT_SRC_START0, 0x00 },
{ S1DREG_BBLT_SRC_START1, 0x00 },
{ S1DREG_BBLT_SRC_START2, 0x00 },
{ S1DREG_BBLT_DST_START0, 0x00 },
{ S1DREG_BBLT_DST_START1, 0x00 },
{ S1DREG_BBLT_DST_START2, 0x00 },
{ S1DREG_BBLT_MEM_OFF0, 0x00 },
{ S1DREG_BBLT_MEM_OFF1, 0x00 },
{ S1DREG_BBLT_WIDTH0, 0x00 },
{ S1DREG_BBLT_WIDTH1, 0x00 },
{ S1DREG_BBLT_HEIGHT0, 0x00 },
{ S1DREG_BBLT_HEIGHT1, 0x00 },
{ S1DREG_BBLT_BGC0, 0x00 },
{ S1DREG_BBLT_BGC1, 0x00 },
{ S1DREG_BBLT_FGC0, 0x00 },
{ S1DREG_BBLT_FGC1, 0x00 },
{ S1DREG_LKUP_MODE, 0x00 },
{ S1DREG_LKUP_ADDR, 0x00 },
{ S1DREG_PS_CNF, 0x10 },
{ S1DREG_PS_STATUS, 0x00 },
{ S1DREG_CPU2MEM_WDOGT, 0x00 },
{ S1DREG_COM_DISP_MODE, 0x02 },
};
static struct s1d13xxxfb_pdata s1d13806_platform_data = {
.initregs = s1d13806_initregs,
.initregssize = ARRAY_SIZE(s1d13806_initregs),
};
static struct resource s1d13806_resources[] = {
[0] = {
.start = 0x07200000,
.end = 0x07200000 + 0x00200000 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x07000000,
.end = 0x07000000 + 0x00200000 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device s1d13806_device = {
.name = "s1d13806fb",
.id = -1,
.num_resources = ARRAY_SIZE(s1d13806_resources),
.resource = s1d13806_resources,
.dev = {
.platform_data = &s1d13806_platform_data,
},
};
#endif
static struct platform_device *microdev_devices[] __initdata = {
&smc91x_device,
#ifdef CONFIG_FB_S1D13XXX
&s1d13806_device,
#endif
};
static int __init microdev_devices_setup(void)
{ {
return platform_device_register(&smc91x_device); return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
} }
__initcall(smc91x_setup); __initcall(microdev_devices_setup);
/*
* Initialize the board
*/
void __init platform_setup(void) void __init platform_setup(void)
{ {
int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul); int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
......
arch/sh/configs/microdev_defconfig
View file @ 74017294
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.11-sh # Linux kernel version: 2.6.16-rc1
# Wed Mar 2 15:09:41 2005 # Fri Jan 27 19:43:20 2006
# #
CONFIG_SUPERH=y CONFIG_SUPERH=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_PROBE=y
...@@ -17,11 +16,13 @@ CONFIG_EXPERIMENTAL=y ...@@ -17,11 +16,13 @@ CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
# #
# General setup # General setup
# #
CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set # CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set # CONFIG_POSIX_MQUEUE is not set
...@@ -29,28 +30,53 @@ CONFIG_BSD_PROCESS_ACCT=y ...@@ -29,28 +30,53 @@ CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_SYSCTL=y CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set # CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set # CONFIG_IKCONFIG is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_EMBEDDED=y CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y CONFIG_FUTEX=y
CONFIG_EPOLL=y CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0 CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0 CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0 CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0 CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set # CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
# #
# Loadable module support # Loadable module support
# #
# CONFIG_MODULES is not set # CONFIG_MODULES is not set
#
# Block layer
#
# CONFIG_LBD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
# #
# System type # System type
# #
...@@ -61,9 +87,7 @@ CONFIG_CC_ALIGN_JUMPS=0 ...@@ -61,9 +87,7 @@ CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_SH_7751_SYSTEMH is not set # CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_STB1_HARP is not set # CONFIG_SH_STB1_HARP is not set
# CONFIG_SH_STB1_OVERDRIVE is not set # CONFIG_SH_STB1_OVERDRIVE is not set
# CONFIG_SH_HP620 is not set # CONFIG_SH_HP6XX is not set
# CONFIG_SH_HP680 is not set
# CONFIG_SH_HP690 is not set
# CONFIG_SH_CQREEK is not set # CONFIG_SH_CQREEK is not set
# CONFIG_SH_DMIDA is not set # CONFIG_SH_DMIDA is not set
# CONFIG_SH_EC3104 is not set # CONFIG_SH_EC3104 is not set
...@@ -78,45 +102,94 @@ CONFIG_CC_ALIGN_JUMPS=0 ...@@ -78,45 +102,94 @@ CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_SH_SECUREEDGE5410 is not set # CONFIG_SH_SECUREEDGE5410 is not set
# CONFIG_SH_HS7751RVOIP is not set # CONFIG_SH_HS7751RVOIP is not set
# CONFIG_SH_RTS7751R2D is not set # CONFIG_SH_RTS7751R2D is not set
# CONFIG_SH_R7780RP is not set
# CONFIG_SH_EDOSK7705 is not set # CONFIG_SH_EDOSK7705 is not set
CONFIG_SH_SH4202_MICRODEV=y CONFIG_SH_SH4202_MICRODEV=y
# CONFIG_SH_LANDISK is not set
# CONFIG_SH_TITAN is not set
# CONFIG_SH_UNKNOWN is not set # CONFIG_SH_UNKNOWN is not set
# CONFIG_CPU_SH2 is not set
# CONFIG_CPU_SH3 is not set #
# Processor selection
#
CONFIG_CPU_SH4=y CONFIG_CPU_SH4=y
#
# SH-2 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7604 is not set
#
# SH-3 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7300 is not set # CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set
# CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set
#
# SH-4 Processor Support
#
# CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set # CONFIG_CPU_SUBTYPE_SH7751 is not set
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH73180 is not set CONFIG_CPU_SUBTYPE_SH4_202=y
#
# ST40 Processor Support
#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set # CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set # CONFIG_CPU_SUBTYPE_ST40GX1 is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
#
# SH-4A Processor Support
#
# CONFIG_CPU_SUBTYPE_SH73180 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# Memory management options
#
CONFIG_MMU=y CONFIG_MMU=y
CONFIG_CMDLINE_BOOL=y CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_CMDLINE="console=ttySC0,115200" CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
#
# Cache configuration
#
# CONFIG_SH_DIRECT_MAPPED is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x04000000 CONFIG_MEMORY_SIZE=0x04000000
CONFIG_MEMORY_SET=y
# CONFIG_MEMORY_OVERRIDE is not set #
# Processor features
#
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_RTC=y CONFIG_SH_RTC=y
CONFIG_SH_FPU=y CONFIG_SH_FPU=y
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_PREEMPT=y
# CONFIG_UBC_WAKEUP is not set
# CONFIG_SH_WRITETHROUGH is not set
# CONFIG_SH_OCRAM is not set
# CONFIG_SH_STORE_QUEUES is not set # CONFIG_SH_STORE_QUEUES is not set
# CONFIG_SMP is not set CONFIG_CPU_HAS_INTEVT=y
CONFIG_SH_PCLK_CALC=y CONFIG_CPU_HAS_SR_RB=y
CONFIG_SH_PCLK_FREQ=65986048
#
# Timer support
#
CONFIG_SH_TMU=y
CONFIG_SH_PCLK_FREQ=66000000
# #
# CPU Frequency scaling # CPU Frequency scaling
...@@ -137,20 +210,31 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 ...@@ -137,20 +210,31 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
CONFIG_HEARTBEAT=y CONFIG_HEARTBEAT=y
# #
# Bus options (PCI, PCMCIA, EISA, MCA, ISA) # Kernel features
# #
CONFIG_ISA=y # CONFIG_KEXEC is not set
# CONFIG_PCI is not set CONFIG_PREEMPT=y
# CONFIG_SMP is not set
# #
# PCCARD (PCMCIA/CardBus) support # Boot options
# #
# CONFIG_PCCARD is not set CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200"
# #
# PC-card bridges # Bus options
# #
CONFIG_PCMCIA_PROBE=y # CONFIG_SUPERHYWAY is not set
# CONFIG_PCI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
# #
# PCI Hotplug Support # PCI Hotplug Support
...@@ -164,9 +248,79 @@ CONFIG_BINFMT_ELF=y ...@@ -164,9 +248,79 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set # CONFIG_BINFMT_MISC is not set
# #
# SH initrd options # Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
# #
# CONFIG_EMBEDDED_RAMDISK is not set # CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
# #
# Device Drivers # Device Drivers
...@@ -179,6 +333,11 @@ CONFIG_STANDALONE=y ...@@ -179,6 +333,11 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set # CONFIG_FW_LOADER is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
# #
...@@ -192,13 +351,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y ...@@ -192,13 +351,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# #
# Plug and Play support # Plug and Play support
# #
# CONFIG_PNP is not set
# #
# Block devices # Block devices
# #
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NBD is not set
...@@ -206,17 +362,7 @@ CONFIG_BLK_DEV_RAM=y ...@@ -206,17 +362,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set # CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set # CONFIG_ATA_OVER_ETH is not set
# #
...@@ -241,9 +387,7 @@ CONFIG_BLK_DEV_IDECD=y ...@@ -241,9 +387,7 @@ CONFIG_BLK_DEV_IDECD=y
# IDE chipset support/bugfixes # IDE chipset support/bugfixes
# #
CONFIG_IDE_GENERIC=y CONFIG_IDE_GENERIC=y
CONFIG_IDE_SH=y
# CONFIG_IDE_ARM is not set # CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set # CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set # CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_HD is not set
...@@ -251,13 +395,9 @@ CONFIG_IDE_SH=y ...@@ -251,13 +395,9 @@ CONFIG_IDE_SH=y
# #
# SCSI device support # SCSI device support
# #
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set # CONFIG_SCSI is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
# #
# Multi-device support (RAID and LVM) # Multi-device support (RAID and LVM)
# #
...@@ -266,6 +406,7 @@ CONFIG_IDE_SH=y ...@@ -266,6 +406,7 @@ CONFIG_IDE_SH=y
# #
# Fusion MPT device support # Fusion MPT device support
# #
# CONFIG_FUSION is not set
# #
# IEEE 1394 (FireWire) support # IEEE 1394 (FireWire) support
...@@ -276,69 +417,8 @@ CONFIG_IDE_SH=y ...@@ -276,69 +417,8 @@ CONFIG_IDE_SH=y
# #
# #
# Networking support # Network device support
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_UNIX is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
# #
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set # CONFIG_DUMMY is not set
# CONFIG_BONDING is not set # CONFIG_BONDING is not set
...@@ -346,9 +426,9 @@ CONFIG_NETDEVICES=y ...@@ -346,9 +426,9 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set # CONFIG_TUN is not set
# #
# ARCnet devices # PHY device support
# #
# CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set
# #
# Ethernet (10 or 100Mbit) # Ethernet (10 or 100Mbit)
...@@ -356,17 +436,7 @@ CONFIG_NETDEVICES=y ...@@ -356,17 +436,7 @@ CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y CONFIG_NET_ETHERNET=y
CONFIG_MII=y CONFIG_MII=y
# CONFIG_STNIC is not set # CONFIG_STNIC is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
CONFIG_SMC91X=y CONFIG_SMC91X=y
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
# #
# Ethernet (1000 Mbit) # Ethernet (1000 Mbit)
...@@ -379,7 +449,6 @@ CONFIG_SMC91X=y ...@@ -379,7 +449,6 @@ CONFIG_SMC91X=y
# #
# Token Ring devices # Token Ring devices
# #
# CONFIG_TR is not set
# #
# Wireless LAN (non-hamradio) # Wireless LAN (non-hamradio)
...@@ -394,6 +463,8 @@ CONFIG_SMC91X=y ...@@ -394,6 +463,8 @@ CONFIG_SMC91X=y
# CONFIG_SLIP is not set # CONFIG_SLIP is not set
# CONFIG_SHAPER is not set # CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set # CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# #
# ISDN subsystem # ISDN subsystem
...@@ -411,20 +482,10 @@ CONFIG_SMC91X=y ...@@ -411,20 +482,10 @@ CONFIG_SMC91X=y
# CONFIG_INPUT is not set # CONFIG_INPUT is not set
# #
# Userland interfaces # Hardware I/O ports
#
#
# Input I/O drivers
# #
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set # CONFIG_SERIO is not set
# CONFIG_SERIO_I8042 is not set # CONFIG_GAMEPORT is not set
#
# Input Device Drivers
#
# #
# Character devices # Character devices
...@@ -464,23 +525,45 @@ CONFIG_RTC=y ...@@ -464,23 +525,45 @@ CONFIG_RTC=y
# #
# Ftape, the floppy tape device driver # Ftape, the floppy tape device driver
# #
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set # CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# #
# I2C support # I2C support
# #
# CONFIG_I2C is not set # CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# #
# Dallas's 1-wire bus # Dallas's 1-wire bus
# #
# CONFIG_W1 is not set # CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# #
# Misc devices # Misc devices
# #
#
# Multimedia Capabilities Port drivers
#
# #
# Multimedia devices # Multimedia devices
# #
...@@ -508,7 +591,7 @@ CONFIG_RTC=y ...@@ -508,7 +591,7 @@ CONFIG_RTC=y
# CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_OHCI is not set
# #
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# #
# #
...@@ -524,13 +607,21 @@ CONFIG_RTC=y ...@@ -524,13 +607,21 @@ CONFIG_RTC=y
# #
# InfiniBand support # InfiniBand support
# #
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
# #
# File systems # File systems
# #
CONFIG_EXT2_FS=y CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_POSIX_ACL is not set
...@@ -540,17 +631,17 @@ CONFIG_JBD=y ...@@ -540,17 +631,17 @@ CONFIG_JBD=y
CONFIG_FS_MBCACHE=y CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set # CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set # CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set # CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set # CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# #
# CD-ROM/DVD Filesystems # CD-ROM/DVD Filesystems
...@@ -574,16 +665,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ...@@ -574,16 +665,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS_XATTR=y
# CONFIG_DEVPTS_FS_SECURITY is not set
CONFIG_TMPFS=y CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set # CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set # CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
# #
# Miscellaneous filesystems # Miscellaneous filesystems
...@@ -607,12 +694,14 @@ CONFIG_RAMFS=y ...@@ -607,12 +694,14 @@ CONFIG_RAMFS=y
# #
CONFIG_NFS_FS=y CONFIG_NFS_FS=y
CONFIG_NFS_V3=y CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set # CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y CONFIG_RPCSEC_GSS_KRB5=y
...@@ -622,6 +711,7 @@ CONFIG_RPCSEC_GSS_KRB5=y ...@@ -622,6 +711,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_NCP_FS is not set # CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set # CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set # CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
# #
# Partition Types # Partition Types
...@@ -681,8 +771,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" ...@@ -681,8 +771,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# #
# Kernel hacking # Kernel hacking
# #
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_PREEMPT=y CONFIG_LOG_BUF_SHIFT=14
# CONFIG_FRAME_POINTER is not set # CONFIG_FRAME_POINTER is not set
# CONFIG_SH_STANDARD_BIOS is not set # CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_SCIF_CONSOLE is not set
...@@ -706,6 +798,7 @@ CONFIG_CRYPTO_MD5=y ...@@ -706,6 +798,7 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH is not set
...@@ -730,5 +823,6 @@ CONFIG_CRYPTO_DES=y ...@@ -730,5 +823,6 @@ CONFIG_CRYPTO_DES=y
# Library routines # Library routines
# #
# CONFIG_CRC_CCITT is not set # CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
include/asm-sh/microdev/irq.h → include/asm-sh/microdev.h
View file @ 74017294
/* /*
* linux/include/asm-sh/irq_microdev.h * linux/include/asm-sh/microdev.h
* *
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
* *
* IRQ functions for the SuperH SH4-202 MicroDev board. * Definitions for the SuperH SH4-202 MicroDev board.
* *
* May be copied or modified under the terms of the GNU General Public * May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information. * License. See linux/COPYING for more information.
*
*/ */
#ifndef __ASM_SH_MICRODEV_H
#define __ASM_SH_MICRODEV_H
#ifndef _ASM_SH_IRQ_MICRODEV_H
#define _ASM_SH_IRQ_MICRODEV_H
extern void init_microdev_irq(void); extern void init_microdev_irq(void);
extern void microdev_print_fpga_intc_status(void); extern void microdev_print_fpga_intc_status(void);
/*
/* * The following are useful macros for manipulating the interrupt
* The following are useful macros for manipulating the * controller (INTC) on the CPU-board FPGA. should be noted that there
* interrupt controller (INTC) on the CPU-board FPGA. * is an INTC on the FPGA, and a seperate INTC on the SH4-202 core -
* It should be noted that there is an INTC on the FPGA, * these are two different things, both of which need to be prorammed to
* and a seperate INTC on the SH4-202 core - these are * correctly route - unfortunately, they have the same name and
* two different things, both of which need to be prorammed * abbreviations!
* to correctly route - unfortunately, they have the */
* same name and abbreviations!
*/
#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ #define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */
#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ #define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */
#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ #define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */
...@@ -38,10 +33,10 @@ extern void microdev_print_fpga_intc_status(void); ...@@ -38,10 +33,10 @@ extern void microdev_print_fpga_intc_status(void);
#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ #define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */
/* /*
* The following are the IRQ numbers for the Linux Kernel for external interrupts. * The following are the IRQ numbers for the Linux Kernel for external
* i.e. the numbers seen by 'cat /proc/interrupt'. * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'.
*/ */
#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ #define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ #define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */
#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ #define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */
...@@ -51,10 +46,11 @@ extern void microdev_print_fpga_intc_status(void); ...@@ -51,10 +46,11 @@ extern void microdev_print_fpga_intc_status(void);
#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ #define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */
#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ #define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */
/* /*
* The following are the IRQ numbers for the INTC on the FPGA for external interrupts. * The following are the IRQ numbers for the INTC on the FPGA for
* i.e. the bits in the INTC registers in the FPGA. * external interrupts. i.e. the bits in the INTC registers in the
*/ * FPGA.
*/
#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ #define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */
#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ #define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */
#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ #define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */
...@@ -69,4 +65,16 @@ extern void microdev_print_fpga_intc_status(void); ...@@ -69,4 +65,16 @@ extern void microdev_print_fpga_intc_status(void);
#define MICRODEV_IRQ_PCI_INTC 10 #define MICRODEV_IRQ_PCI_INTC 10
#define MICRODEV_IRQ_PCI_INTD 11 #define MICRODEV_IRQ_PCI_INTD 11
#endif /* _ASM_SH_IRQ_MICRODEV_H */ #define __IO_PREFIX microdev
#include <asm/io_generic.h>
#if defined(CONFIG_PCI)
unsigned char microdev_pci_inb(unsigned long port);
unsigned short microdev_pci_inw(unsigned long port);
unsigned long microdev_pci_inl(unsigned long port);
void microdev_pci_outb(unsigned char data, unsigned long port);
void microdev_pci_outw(unsigned short data, unsigned long port);
void microdev_pci_outl(unsigned long data, unsigned long port);
#endif
#endif /* __ASM_SH_MICRODEV_H */
include/asm-sh/microdev/io.h deleted 100644 → 0
View file @ 4a41cdf9
/*
* linux/include/asm-sh/io_microdev.h
*
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
*
* IO functions for the SuperH SH4-202 MicroDev board.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
*/
#ifndef _ASM_SH_IO_MICRODEV_H
#define _ASM_SH_IO_MICRODEV_H
extern unsigned long microdev_isa_port2addr(unsigned long offset);
extern unsigned char microdev_inb(unsigned long port);
extern unsigned short microdev_inw(unsigned long port);
extern unsigned int microdev_inl(unsigned long port);
extern void microdev_outb(unsigned char value, unsigned long port);
extern void microdev_outw(unsigned short value, unsigned long port);
extern void microdev_outl(unsigned int value, unsigned long port);
extern unsigned char microdev_inb_p(unsigned long port);
extern unsigned short microdev_inw_p(unsigned long port);
extern unsigned int microdev_inl_p(unsigned long port);
extern void microdev_outb_p(unsigned char value, unsigned long port);
extern void microdev_outw_p(unsigned short value, unsigned long port);
extern void microdev_outl_p(unsigned int value, unsigned long port);
extern void microdev_insb(unsigned long port, void *addr, unsigned long count);
extern void microdev_insw(unsigned long port, void *addr, unsigned long count);
extern void microdev_insl(unsigned long port, void *addr, unsigned long count);
extern void microdev_outsb(unsigned long port, const void *addr, unsigned long count);
extern void microdev_outsw(unsigned long port, const void *addr, unsigned long count);
extern void microdev_outsl(unsigned long port, const void *addr, unsigned long count);
#if defined(CONFIG_PCI)
extern unsigned char microdev_pci_inb(unsigned long port);
extern unsigned short microdev_pci_inw(unsigned long port);
extern unsigned long microdev_pci_inl(unsigned long port);
extern void microdev_pci_outb(unsigned char data, unsigned long port);
extern void microdev_pci_outw(unsigned short data, unsigned long port);
extern void microdev_pci_outl(unsigned long data, unsigned long port);
#endif
#endif /* _ASM_SH_IO_MICRODEV_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7