[S390] convert qeth printks to dev_xxx and pr_xxx macros.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

drivers/s390/net/qeth_core.h

@@ -35,8 +35,6 @@
 
 #include "qeth_core_mpc.h"
 
-#define KMSG_COMPONENT "qeth"
-
 /**
  * Debug Facility stuff
  */
@@ -75,11 +73,6 @@ struct qeth_dbf_info {
 #define QETH_DBF_TEXT_(name, level, text...) \
 	qeth_dbf_longtext(QETH_DBF_##name, level, text)
 
-/**
- * some more debug stuff
- */
-#define PRINTK_HEADER	"qeth: "
-
 #define SENSE_COMMAND_REJECT_BYTE 0
 #define SENSE_COMMAND_REJECT_FLAG 0x80
 #define SENSE_RESETTING_EVENT_BYTE 1

drivers/s390/net/qeth_l2_main.c

@@ -8,6 +8,9 @@
  *		 Frank Blaschka <frank.blaschka@de.ibm.com>
  */
 
+#define KMSG_COMPONENT "qeth"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/string.h>
@@ -503,7 +506,8 @@ static int qeth_l2_send_setmac_cb(struct qeth_card *card,
 		card->info.mac_bits |= QETH_LAYER2_MAC_REGISTERED;
 		memcpy(card->dev->dev_addr, cmd->data.setdelmac.mac,
 		       OSA_ADDR_LEN);
-		PRINT_INFO("MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
+		dev_info(&card->gdev->dev,
+			"MAC address %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
 			"successfully registered on device %s\n",
 			card->dev->dev_addr[0], card->dev->dev_addr[1],
 			card->dev->dev_addr[2], card->dev->dev_addr[3],
@@ -1015,9 +1019,8 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 	if (rc) {
 		QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
 		if (rc == 0xe080) {
-			PRINT_WARN("LAN on card %s if offline! "
-				   "Waiting for STARTLAN from card.\n",
-				   CARD_BUS_ID(card));
+			dev_warn(&card->gdev->dev,
+				"The LAN is offline\n");
 			card->lan_online = 0;
 		}
 		return rc;
@@ -1117,8 +1120,8 @@ static int qeth_l2_recover(void *ptr)
 	if (!qeth_do_run_thread(card, QETH_RECOVER_THREAD))
 		return 0;
 	QETH_DBF_TEXT(TRACE, 2, "recover2");
-	PRINT_WARN("Recovery of device %s started ...\n",
-		   CARD_BUS_ID(card));
+	dev_warn(&card->gdev->dev,
+		"A recovery process has been started for the device\n");
 	card->use_hard_stop = 1;
 	__qeth_l2_set_offline(card->gdev, 1);
 	rc = __qeth_l2_set_online(card->gdev, 1);
@@ -1126,27 +1129,27 @@ static int qeth_l2_recover(void *ptr)
 	qeth_clear_thread_start_bit(card, QETH_RECOVER_THREAD);
 	qeth_clear_thread_running_bit(card, QETH_RECOVER_THREAD);
 	if (!rc)
-		PRINT_INFO("Device %s successfully recovered!\n",
-			   CARD_BUS_ID(card));
+		dev_info(&card->gdev->dev,
+			"Device successfully recovered!\n");
 	else {
 		rtnl_lock();
 		dev_close(card->dev);
 		rtnl_unlock();
-		PRINT_INFO("Device %s could not be recovered!\n",
-			   CARD_BUS_ID(card));
+		dev_warn(&card->gdev->dev, "The qeth device driver "
+			"failed to recover an error on the device\n");
 	}
 	return 0;
 }
 
 static int __init qeth_l2_init(void)
 {
-	PRINT_INFO("register layer 2 discipline\n");
+	pr_info("register layer 2 discipline\n");
 	return 0;
 }
 
 static void __exit qeth_l2_exit(void)
 {
-	PRINT_INFO("unregister layer 2 discipline\n");
+	pr_info("unregister layer 2 discipline\n");
 }
 
 static void qeth_l2_shutdown(struct ccwgroup_device *gdev)