Merge branch 'exynos-drm-next' of...

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
. Add atomic feature support
  - Exynos also now supports atomic feature. However, it doesn't
    guarantee atomic operation yet, and is required for more cleanups.
    This time we just modified for Exynos drm driver to use atomic
    interfaces instead of legacy ones. Next time, we will enhance
    Exynos drm driver to support the atomic operation.
. Add iommu support
  - This is a patch series according to below Exynos iommu integration
    work with DT and dma-mapping subsystem,
    http://lwn.net/Articles/607626/
. Consolidate Exynos drm driver initialization.
  - This patch sereis resolves the issue that only the first compoments
    was bound when happened deferred probing for other pipelines and
    also makes the driver to be more cleanned up by moving the dispered
    codes for registering kms drivers to one place.
. Add new MIC, DECON drivers, and MIPI-DSI support for Exynos5433.
  - Add MIC(Mobile image compressor) driver. MIC is a new IP for Exynos5433
    and later, which is used to transfer frame data to MIPI-DSI controller
    compressing the data to reduce memory bandwidth.
  - Add DECON driver for Exynos5433 SoC. This IP is a dislay controller
    similar to Exynos7's one but this controller has much different registers
    from Exynos7's ones so this driver has been implemented separately.
    We will implement a helper modules for FIMD and two DECON controllers
    to remove duplicated codes later.
  - Add Exynos5433 SoC support to MIPI-DSI driver, and device tree
    relevant patches.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (50 commits)
  ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi'
  drm/exynos: dsi: do not set TE GPIO direction by input
  drm/exynos: dsi: add support for MIC driver as a bridge
  drm/exynos: dsi: add support for Exynos5433
  drm/exynos: dsi: make use of array for clock access
  drm/exynos: dsi: make use of driver data for static values
  drm/exynos: dsi: add macros for register access
  drm/exynos: dsi: rename pll_clk to sclk_clk
  drm/exynos: mic: add MIC driver
  of: add helper for getting endpoint node of specific identifiers
  drm/exynos: add Exynos5433 decon driver
  drm/exynos: fix the input prompt of Exynos7 DECON
  drm/exynos: add drm_iommu_attach_device_if_possible()
  drm/exynos: Add the dependency for DRM_EXYNOS to DPI/DSI/DP
  drm/exynos: remove the dependency of DP driver for ARCH_EXYNOS
  drm/exynos: do not wait for vblank at atomic operation
  drm/exynos: Remove unused vma field of exynos_drm_gem_obj
  drm/exynos: fimd: fix page fault issue with iommu
  drm/exynos: iommu: improve a check for non-iommu dma_ops
  drm/exynos: iommu: detach from default dma-mapping domain on init
  ...

Documentation/devicetree/bindings/video/exynos-mic.txt

+Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
+
+MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
+not capable to transfer high resoltuion frame data as decon can send. MIC
+solves this problem by compressing the frame data by 1/2 before it is
+transferred through mipi dsi. The compressed frame data must be uncompressed in
+the panel PCB.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-mic".
+- reg: physical base address and length of the MIC registers set and system
+       register of mic.
+- clocks: must include clock specifiers corresponding to entries in the
+	  clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
+- samsung,disp-syscon: the reference node for syscon for DISP block.
+- ports: contains a port which is connected to decon node and dsi node.
+	 address-cells and size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the
+	decon node or dsi node. The reg value must be 0 and 1 respectively.
+
+Example:
+SoC specific DT entry:
+mic: mic@13930000 {
+	compatible = "samsung,exynos5433-mic";
+	reg = <0x13930000 0x48>;
+	clocks = <&cmu_disp CLK_PCLK_MIC0>,
+	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
+	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
+	samsung,disp-syscon = <&syscon_disp>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			mic_to_decon: endpoint {
+				remote-endpoint = <&decon_to_mic>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			mic_to_dsi: endpoint {
+				remote-endpoint = <&dsi_to_mic>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/video/exynos5433-decon.txt

+Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos5433-decon";
+- reg: physical base address and length of the DECON registers set.
+- interrupts: should contain a list of all DECON IP block interrupts in the
+	      order: VSYNC, LCD_SYSTEM. The interrupt specifier format
+	      depends on the interrupt controller used.
+- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
+		   in the same order as they were listed in the interrupts
+		   property.
+- clocks: must include clock specifiers corresponding to entries in the
+	  clock-names property.
+- clock-names: list of clock names sorted in the same order as the clocks
+	       property. Must contain "aclk_decon", "aclk_smmu_decon0x",
+	       "aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
+	       "sclk_decon_eclk"
+- ports: contains a port which is connected to mic node. address-cells and
+	 size-cells must 1 and 0, respectively.
+- port: contains an endpoint node which is connected to the endpoint in the mic
+	node. The reg value muset be 0.
+- i80-if-timings: specify whether the panel which is connected to decon uses
+		  i80 lcd interface or mipi video interface. This node contains
+		  no timing information as that of fimd does. Because there is
+		  no register in decon to specify i80 interface timing value,
+		  it is not needed, but make it remain to use same kind of node
+		  in fimd and exynos7 decon.
+
+Example:
+SoC specific DT entry:
+decon: decon@13800000 {
+	compatible = "samsung,exynos5433-decon";
+	reg = <0x13800000 0x2104>;
+	clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_ACLK_XIU_DECON0X>,
+		<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
+		<&cmu_disp CLK_SCLK_DECON_VCLK>,
+		<&cmu_disp CLK_SCLK_DECON_ECLK>;
+	clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
+		"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
+	interrupt-names = "vsync", "lcd_sys";
+	interrupts = <0 202 0>, <0 203 0>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			decon_to_mic: endpoint {
+				remote-endpoint = <&mic_to_decon>;
+			};
+		};
+	};
+};
+
+Board specific DT entry:
+&decon {
+	i80-if-timings {
+	};
+};

Documentation/devicetree/bindings/video/exynos_dsim.txt

@@ -6,17 +6,19 @@ Required properties:
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
 		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
   - clocks: list of clock specifiers, must contain an entry for each required
     entry in clock-names
-  - clock-names: should include "bus_clk"and "pll_clk" entries
+  - clock-names: should include "bus_clk"and "sclk_mipi" entries
+		 the use of "pll_clk" is deprecated
   - phys: list of phy specifiers, must contain an entry for each required
     entry in phy-names
   - phy-names: should include "dsim" entry
   - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
   - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
-  - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
+  - samsung,pll-clock-frequency: specifies frequency of the oscillator clock
   - #address-cells, #size-cells: should be set respectively to <1> and <0>
     according to DSI host bindings (see MIPI DSI bindings [1])
 
@@ -30,10 +32,19 @@ Video interfaces:
   Device node can contain video interface port nodes according to [2].
   The following are properties specific to those nodes:
 
-  port node:
-    - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+  port node inbound:
+    - reg: (required) must be 0.
+  port node outbound:
+    - reg: (required) must be 1.
 
-  endpoint node of DSI port (reg = 1):
+  endpoint node connected from mic node (reg = 0):
+    - remote-endpoint: specifies the endpoint in mic node. This node is required
+		       for Exynos5433 mipi dsi. So mic can access to panel node
+		       thoughout this dsi node.
+  endpoint node connected to panel node (reg = 1):
+    - remote-endpoint: specifies the endpoint in panel node. This node is
+		       required in all kinds of exynos mipi dsi to represent
+		       the connection between mipi dsi and panel.
     - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
       mode
     - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
@@ -48,7 +59,7 @@ Example:
 		reg = <0x11C80000 0x10000>;
 		interrupts = <0 79 0>;
 		clocks = <&clock 286>, <&clock 143>;
-		clock-names = "bus_clk", "pll_clk";
+		clock-names = "bus_clk", "sclk_mipi";
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		vddcore-supply = <&vusb_reg>;
@@ -72,7 +83,15 @@ Example:
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			port@0 {
+				reg = <0>;
+				decon_to_mic: endpoint {
+					remote-endpoint = <&mic_to_decon>;
+				};
+			};
+
 			port@1 {
+				reg = <1>;
 				dsi_ep: endpoint {
 					reg = <0>;
 					samsung,burst-clock-frequency = <500000000>;

arch/arm/boot/dts/exynos4.dtsi

@@ -167,7 +167,7 @@ dsi_0: dsi@11C80000 {
 		phys = <&mipi_phy 1>;
 		phy-names = "dsim";
 		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-		clock-names = "bus_clk", "pll_clk";
+		clock-names = "bus_clk", "sclk_mipi";
 		status = "disabled";
 		#address-cells = <1>;
 		#size-cells = <0>;

drivers/gpu/drm/bridge/ps8622.c

@@ -32,6 +32,7 @@
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_atomic_helper.h"
 
 /* Brightness scale on the Parade chip */
 #define PS8622_MAX_BRIGHTNESS 0xff
@@ -499,10 +500,13 @@ static void ps8622_connector_destroy(struct drm_connector *connector)
 }
 
 static const struct drm_connector_funcs ps8622_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = drm_atomic_helper_connector_dpms,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = ps8622_detect,
 	.destroy = ps8622_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
 static int ps8622_attach(struct drm_bridge *bridge)

drivers/gpu/drm/bridge/ptn3460.c

@@ -26,6 +26,7 @@
 
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_atomic_helper.h"
 #include "drm_edid.h"
 #include "drmP.h"
 
@@ -258,10 +259,13 @@ static void ptn3460_connector_destroy(struct drm_connector *connector)
 }
 
 static struct drm_connector_funcs ptn3460_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = drm_atomic_helper_connector_dpms,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = ptn3460_detect,
 	.destroy = ptn3460_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
 static int ptn3460_bridge_attach(struct drm_bridge *bridge)

drivers/gpu/drm/exynos/Kconfig

@@ -24,16 +24,22 @@ config DRM_EXYNOS_FIMD
 	help
 	  Choose this option if you want to use Exynos FIMD for DRM.
 
-config DRM_EXYNOS7_DECON
-	bool "Exynos DRM DECON"
+config DRM_EXYNOS5433_DECON
+	bool "Exynos5433 DRM DECON"
 	depends on DRM_EXYNOS
+	help
+	  Choose this option if you want to use Exynos5433 DECON for DRM.
+
+config DRM_EXYNOS7_DECON
+	bool "Exynos7 DRM DECON"
+	depends on DRM_EXYNOS && !FB_S3C
 	select FB_MODE_HELPERS
 	help
 	  Choose this option if you want to use Exynos DECON for DRM.
 
 config DRM_EXYNOS_DPI
 	bool "EXYNOS DRM parallel output support"
-	depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON)
+	depends on DRM_EXYNOS && (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON)
 	select DRM_PANEL
 	default n
 	help
@@ -41,7 +47,7 @@ config DRM_EXYNOS_DPI
 
 config DRM_EXYNOS_DSI
 	bool "EXYNOS DRM MIPI-DSI driver support"
-	depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON)
+	depends on DRM_EXYNOS && (DRM_EXYNOS_FIMD || DRM_EXYNOS5433_DECON || DRM_EXYNOS7_DECON)
 	select DRM_MIPI_DSI
 	select DRM_PANEL
 	default n
@@ -50,7 +56,7 @@ config DRM_EXYNOS_DSI
 
 config DRM_EXYNOS_DP
 	bool "EXYNOS DRM DP driver support"
-	depends on (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON) && ARCH_EXYNOS && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
+	depends on DRM_EXYNOS && (DRM_EXYNOS_FIMD || DRM_EXYNOS7_DECON) && (DRM_PTN3460=n || DRM_PTN3460=y || DRM_PTN3460=DRM_EXYNOS)
 	default DRM_EXYNOS
 	select DRM_PANEL
 	help
@@ -97,3 +103,9 @@ config DRM_EXYNOS_GSC
 	depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5 && !ARCH_MULTIPLATFORM
 	help
 	  Choose this option if you want to use Exynos GSC for DRM.
+
+config DRM_EXYNOS_MIC
+	bool "Exynos DRM MIC"
+	depends on (DRM_EXYNOS && DRM_EXYNOS5433_DECON)
+	help
+	  Choose this option if you want to use Exynos MIC for DRM.

drivers/gpu/drm/exynos/Makefile

@@ -10,6 +10,7 @@ exynosdrm-y := exynos_drm_drv.o exynos_drm_encoder.o \
 
 exynosdrm-$(CONFIG_DRM_EXYNOS_IOMMU) += exynos_drm_iommu.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_FIMD)	+= exynos_drm_fimd.o
+exynosdrm-$(CONFIG_DRM_EXYNOS5433_DECON)	+= exynos5433_drm_decon.o
 exynosdrm-$(CONFIG_DRM_EXYNOS7_DECON)	+= exynos7_drm_decon.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_DPI)	+= exynos_drm_dpi.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_DSI)	+= exynos_drm_dsi.o
@@ -21,5 +22,6 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_IPP)	+= exynos_drm_ipp.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_FIMC)	+= exynos_drm_fimc.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_ROTATOR)	+= exynos_drm_rotator.o
 exynosdrm-$(CONFIG_DRM_EXYNOS_GSC)	+= exynos_drm_gsc.o
+exynosdrm-$(CONFIG_DRM_EXYNOS_MIC)     += exynos_drm_mic.o
 
 obj-$(CONFIG_DRM_EXYNOS)		+= exynosdrm.o

drivers/gpu/drm/exynos/exynos7_drm_decon.c

@@ -89,8 +89,9 @@ static void decon_wait_for_vblank(struct exynos_drm_crtc *crtc)
 		DRM_DEBUG_KMS("vblank wait timed out.\n");
 }
 
-static void decon_clear_channel(struct decon_context *ctx)
+static void decon_clear_channels(struct exynos_drm_crtc *crtc)
 {
+	struct decon_context *ctx = crtc->ctx;
 	unsigned int win, ch_enabled = 0;
 
 	DRM_DEBUG_KMS("%s\n", __FILE__);
@@ -120,27 +121,16 @@ static int decon_ctx_initialize(struct decon_context *ctx,
 			struct drm_device *drm_dev)
 {
 	struct exynos_drm_private *priv = drm_dev->dev_private;
+	int ret;
 
 	ctx->drm_dev = drm_dev;
 	ctx->pipe = priv->pipe++;
 
-	/* attach this sub driver to iommu mapping if supported. */
-	if (is_drm_iommu_supported(ctx->drm_dev)) {
-		int ret;
+	ret = drm_iommu_attach_device_if_possible(ctx->crtc, drm_dev, ctx->dev);
+	if (ret)
+		priv->pipe--;
 
-		/*
-		 * If any channel is already active, iommu will throw
-		 * a PAGE FAULT when enabled. So clear any channel if enabled.
-		 */
-		decon_clear_channel(ctx);
-		ret = drm_iommu_attach_device(ctx->drm_dev, ctx->dev);
-		if (ret) {
-			DRM_ERROR("drm_iommu_attach failed.\n");
 	return ret;
-		}
-	}
-
-	return 0;
 }
 
 static void decon_ctx_remove(struct decon_context *ctx)
@@ -175,7 +165,7 @@ static bool decon_mode_fixup(struct exynos_drm_crtc *crtc,
 static void decon_commit(struct exynos_drm_crtc *crtc)
 {
 	struct decon_context *ctx = crtc->ctx;
-	struct drm_display_mode *mode = &crtc->base.mode;
+	struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
 	u32 val, clkdiv;
 
 	if (ctx->suspended)
@@ -395,7 +385,7 @@ static void decon_shadow_protect_win(struct decon_context *ctx,
 static void decon_win_commit(struct exynos_drm_crtc *crtc, unsigned int win)
 {
 	struct decon_context *ctx = crtc->ctx;
-	struct drm_display_mode *mode = &crtc->base.mode;
+	struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
 	struct exynos_drm_plane *plane;
 	int padding;
 	unsigned long val, alpha;
@@ -410,11 +400,8 @@ static void decon_win_commit(struct exynos_drm_crtc *crtc, unsigned int win)
 
 	plane = &ctx->planes[win];
 
-	/* If suspended, enable this on resume */
-	if (ctx->suspended) {
-		plane->resume = true;
+	if (ctx->suspended)
 		return;
-	}
 
 	/*
 	 * SHADOWCON/PRTCON register is used for enabling timing.
@@ -506,8 +493,6 @@ static void decon_win_commit(struct exynos_drm_crtc *crtc, unsigned int win)
 	val = readl(ctx->regs + DECON_UPDATE);
 	val |= DECON_UPDATE_STANDALONE_F;
 	writel(val, ctx->regs + DECON_UPDATE);
-
-	plane->enabled = true;
 }
 
 static void decon_win_disable(struct exynos_drm_crtc *crtc, unsigned int win)
@@ -521,11 +506,8 @@ static void decon_win_disable(struct exynos_drm_crtc *crtc, unsigned int win)
 
 	plane = &ctx->planes[win];
 
-	if (ctx->suspended) {
-		/* do not resume this window*/
-		plane->resume = false;
+	if (ctx->suspended)
 		return;
-	}
 
 	/* protect windows */
 	decon_shadow_protect_win(ctx, win, true);
@@ -541,49 +523,6 @@ static void decon_win_disable(struct exynos_drm_crtc *crtc, unsigned int win)
 	val = readl(ctx->regs + DECON_UPDATE);
 	val |= DECON_UPDATE_STANDALONE_F;
 	writel(val, ctx->regs + DECON_UPDATE);
-
-	plane->enabled = false;
-}
-
-static void decon_window_suspend(struct decon_context *ctx)
-{
-	struct exynos_drm_plane *plane;
-	int i;
-
-	for (i = 0; i < WINDOWS_NR; i++) {
-		plane = &ctx->planes[i];
-		plane->resume = plane->enabled;
-		if (plane->enabled)
-			decon_win_disable(ctx->crtc, i);
-	}
-}
-
-static void decon_window_resume(struct decon_context *ctx)
-{
-	struct exynos_drm_plane *plane;
-	int i;
-
-	for (i = 0; i < WINDOWS_NR; i++) {
-		plane = &ctx->planes[i];
-		plane->enabled = plane->resume;
-		plane->resume = false;
-	}
-}
-
-static void decon_apply(struct decon_context *ctx)
-{
-	struct exynos_drm_plane *plane;
-	int i;
-
-	for (i = 0; i < WINDOWS_NR; i++) {
-		plane = &ctx->planes[i];
-		if (plane->enabled)
-			decon_win_commit(ctx->crtc, i);
-		else
-			decon_win_disable(ctx->crtc, i);
-	}
-
-	decon_commit(ctx->crtc);
 }
 
 static void decon_init(struct decon_context *ctx)
@@ -603,12 +542,13 @@ static void decon_init(struct decon_context *ctx)
 		writel(VIDCON1_VCLK_HOLD, ctx->regs + VIDCON1(0));
 }
 
-static int decon_poweron(struct decon_context *ctx)
+static void decon_enable(struct exynos_drm_crtc *crtc)
 {
+	struct decon_context *ctx = crtc->ctx;
 	int ret;
 
 	if (!ctx->suspended)
-		return 0;
+		return;
 
 	ctx->suspended = false;
 
@@ -617,68 +557,51 @@ static int decon_poweron(struct decon_context *ctx)
 	ret = clk_prepare_enable(ctx->pclk);
 	if (ret < 0) {
 		DRM_ERROR("Failed to prepare_enable the pclk [%d]\n", ret);
-		goto pclk_err;
+		return;
 	}
 
 	ret = clk_prepare_enable(ctx->aclk);
 	if (ret < 0) {
 		DRM_ERROR("Failed to prepare_enable the aclk [%d]\n", ret);
-		goto aclk_err;
+		return;
 	}
 
 	ret = clk_prepare_enable(ctx->eclk);
 	if  (ret < 0) {
 		DRM_ERROR("Failed to prepare_enable the eclk [%d]\n", ret);
-		goto eclk_err;
+		return;
 	}
 
 	ret = clk_prepare_enable(ctx->vclk);
 	if  (ret < 0) {
 		DRM_ERROR("Failed to prepare_enable the vclk [%d]\n", ret);
-		goto vclk_err;
+		return;
 	}
 
 	decon_init(ctx);
 
 	/* if vblank was enabled status, enable it again. */
-	if (test_and_clear_bit(0, &ctx->irq_flags)) {
-		ret = decon_enable_vblank(ctx->crtc);
-		if (ret) {
-			DRM_ERROR("Failed to re-enable vblank [%d]\n", ret);
-			goto err;
-		}
-	}
-
-	decon_window_resume(ctx);
+	if (test_and_clear_bit(0, &ctx->irq_flags))
+		decon_enable_vblank(ctx->crtc);
 
-	decon_apply(ctx);
-
-	return 0;
-
-err:
-	clk_disable_unprepare(ctx->vclk);
-vclk_err:
-	clk_disable_unprepare(ctx->eclk);
-eclk_err:
-	clk_disable_unprepare(ctx->aclk);
-aclk_err:
-	clk_disable_unprepare(ctx->pclk);
-pclk_err:
-	ctx->suspended = true;
-	return ret;
+	decon_commit(ctx->crtc);
 }
 
-static int decon_poweroff(struct decon_context *ctx)
+static void decon_disable(struct exynos_drm_crtc *crtc)
 {
+	struct decon_context *ctx = crtc->ctx;
+	int i;
+
 	if (ctx->suspended)
-		return 0;
+		return;
 
 	/*
 	 * We need to make sure that all windows are disabled before we
 	 * suspend that connector. Otherwise we might try to scan from
 	 * a destroyed buffer later.
 	 */
-	decon_window_suspend(ctx);
+	for (i = 0; i < WINDOWS_NR; i++)
+		decon_win_disable(crtc, i);
 
 	clk_disable_unprepare(ctx->vclk);
 	clk_disable_unprepare(ctx->eclk);
@@ -688,30 +611,11 @@ static int decon_poweroff(struct decon_context *ctx)
 	pm_runtime_put_sync(ctx->dev);
 
 	ctx->suspended = true;
-	return 0;
-}
-
-static void decon_dpms(struct exynos_drm_crtc *crtc, int mode)
-{
-	DRM_DEBUG_KMS("%s, %d\n", __FILE__, mode);
-
-	switch (mode) {
-	case DRM_MODE_DPMS_ON:
-		decon_poweron(crtc->ctx);
-		break;
-	case DRM_MODE_DPMS_STANDBY:
-	case DRM_MODE_DPMS_SUSPEND:
-	case DRM_MODE_DPMS_OFF:
-		decon_poweroff(crtc->ctx);
-		break;
-	default:
-		DRM_DEBUG_KMS("unspecified mode %d\n", mode);
-		break;
-	}
 }
 
 static const struct exynos_drm_crtc_ops decon_crtc_ops = {
-	.dpms = decon_dpms,
+	.enable = decon_enable,
+	.disable = decon_disable,
 	.mode_fixup = decon_mode_fixup,
 	.commit = decon_commit,
 	.enable_vblank = decon_enable_vblank,
@@ -719,6 +623,7 @@ static const struct exynos_drm_crtc_ops decon_crtc_ops = {
 	.wait_for_vblank = decon_wait_for_vblank,
 	.win_commit = decon_win_commit,
 	.win_disable = decon_win_disable,
+	.clear_channels = decon_clear_channels,
 };
 
 
@@ -796,7 +701,7 @@ static void decon_unbind(struct device *dev, struct device *master,
 {
 	struct decon_context *ctx = dev_get_drvdata(dev);
 
-	decon_dpms(ctx->crtc, DRM_MODE_DPMS_OFF);
+	decon_disable(ctx->crtc);
 
 	if (ctx->display)
 		exynos_dpi_remove(ctx->display);
@@ -824,11 +729,6 @@ static int decon_probe(struct platform_device *pdev)
 	if (!ctx)
 		return -ENOMEM;
 
-	ret = exynos_drm_component_add(dev, EXYNOS_DEVICE_TYPE_CRTC,
-					EXYNOS_DISPLAY_TYPE_LCD);
-	if (ret)
-		return ret;
-
 	ctx->dev = dev;
 	ctx->suspended = true;
 
@@ -838,10 +738,8 @@ static int decon_probe(struct platform_device *pdev)
 	of_node_put(i80_if_timings);
 
 	ctx->regs = of_iomap(dev->of_node, 0);
-	if (!ctx->regs) {
-		ret = -ENOMEM;
-		goto err_del_component;
-	}
+	if (!ctx->regs)
+		return -ENOMEM;
 
 	ctx->pclk = devm_clk_get(dev, "pclk_decon0");
 	if (IS_ERR(ctx->pclk)) {
@@ -911,8 +809,6 @@ static int decon_probe(struct platform_device *pdev)
 err_iounmap:
 	iounmap(ctx->regs);
 
-err_del_component:
-	exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CRTC);
 	return ret;
 }
 
@@ -925,7 +821,6 @@ static int decon_remove(struct platform_device *pdev)
 	iounmap(ctx->regs);
 
 	component_del(&pdev->dev, &decon_component_ops);
-	exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CRTC);
 
 	return 0;
 }

drivers/gpu/drm/exynos/exynos_dp_core.c

@@ -28,6 +28,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_atomic_helper.h>
 #include <drm/drm_panel.h>
 
 #include "exynos_dp_core.h"
@@ -952,10 +953,13 @@ static void exynos_dp_connector_destroy(struct drm_connector *connector)
 }
 
 static struct drm_connector_funcs exynos_dp_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = drm_atomic_helper_connector_dpms,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = exynos_dp_detect,
 	.destroy = exynos_dp_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
 static int exynos_dp_get_modes(struct drm_connector *connector)
@@ -1328,7 +1332,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *panel_node, *bridge_node, *endpoint;
 	struct exynos_dp_device *dp;
-	int ret;
 
 	dp = devm_kzalloc(&pdev->dev, sizeof(struct exynos_dp_device),
 				GFP_KERNEL);
@@ -1339,11 +1342,6 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	dp->display.ops = &exynos_dp_display_ops;
 	platform_set_drvdata(pdev, dp);
 
-	ret = exynos_drm_component_add(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR,
-					dp->display.type);
-	if (ret)
-		return ret;
-
 	panel_node = of_parse_phandle(dev->of_node, "panel", 0);
 	if (panel_node) {
 		dp->panel = of_drm_find_panel(panel_node);
@@ -1364,18 +1362,12 @@ static int exynos_dp_probe(struct platform_device *pdev)
 			return -EPROBE_DEFER;
 	}
 
-	ret = component_add(&pdev->dev, &exynos_dp_ops);
-	if (ret)
-		exynos_drm_component_del(&pdev->dev,
-						EXYNOS_DEVICE_TYPE_CONNECTOR);
-
-	return ret;
+	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
 	component_del(&pdev->dev, &exynos_dp_ops);
-	exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
 
 	return 0;
 }

drivers/gpu/drm/exynos/exynos_drm_crtc.c

@@ -14,57 +14,47 @@
 
 #include <drm/drmP.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
 
 #include "exynos_drm_crtc.h"
 #include "exynos_drm_drv.h"
 #include "exynos_drm_encoder.h"
 #include "exynos_drm_plane.h"
 
-static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
+static void exynos_drm_crtc_enable(struct drm_crtc *crtc)
 {
 	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
 
-	DRM_DEBUG_KMS("crtc[%d] mode[%d]\n", crtc->base.id, mode);
-
-	if (exynos_crtc->dpms == mode) {
-		DRM_DEBUG_KMS("desired dpms mode is same as previous one.\n");
+	if (exynos_crtc->enabled)
 		return;
-	}
-
-	if (mode > DRM_MODE_DPMS_ON) {
-		/* wait for the completion of page flip. */
-		if (!wait_event_timeout(exynos_crtc->pending_flip_queue,
-				(exynos_crtc->event == NULL), HZ/20))
-			exynos_crtc->event = NULL;
-		drm_crtc_vblank_off(crtc);
-	}
 
-	if (exynos_crtc->ops->dpms)
-		exynos_crtc->ops->dpms(exynos_crtc, mode);
+	if (exynos_crtc->ops->enable)
+		exynos_crtc->ops->enable(exynos_crtc);
 
-	exynos_crtc->dpms = mode;
+	exynos_crtc->enabled = true;
 
-	if (mode == DRM_MODE_DPMS_ON)
 	drm_crtc_vblank_on(crtc);
 }
 
-static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
-{
-	/* drm framework doesn't check NULL. */
-}
-
-static void exynos_drm_crtc_commit(struct drm_crtc *crtc)
+static void exynos_drm_crtc_disable(struct drm_crtc *crtc)
 {
 	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
-	struct exynos_drm_plane *exynos_plane = to_exynos_plane(crtc->primary);
 
-	exynos_drm_crtc_dpms(crtc, DRM_MODE_DPMS_ON);
+	if (!exynos_crtc->enabled)
+		return;
+
+	/* wait for the completion of page flip. */
+	if (!wait_event_timeout(exynos_crtc->pending_flip_queue,
+				(exynos_crtc->event == NULL), HZ/20))
+		exynos_crtc->event = NULL;
+
+	drm_crtc_vblank_off(crtc);
 
-	if (exynos_crtc->ops->win_commit)
-		exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
+	if (exynos_crtc->ops->disable)
+		exynos_crtc->ops->disable(exynos_crtc);
 
-	if (exynos_crtc->ops->commit)
-		exynos_crtc->ops->commit(exynos_crtc);
+	exynos_crtc->enabled = false;
 }
 
 static bool
@@ -81,145 +71,38 @@ exynos_drm_crtc_mode_fixup(struct drm_crtc *crtc,
 	return true;
 }
 
-static int
-exynos_drm_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode,
-			  struct drm_display_mode *adjusted_mode, int x, int y,
-			  struct drm_framebuffer *old_fb)
+static void
+exynos_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
 {
-	struct drm_framebuffer *fb = crtc->primary->fb;
-	unsigned int crtc_w;
-	unsigned int crtc_h;
-	int ret;
-
-	/*
-	 * copy the mode data adjusted by mode_fixup() into crtc->mode
-	 * so that hardware can be seet to proper mode.
-	 */
-	memcpy(&crtc->mode, adjusted_mode, sizeof(*adjusted_mode));
-
-	ret = exynos_check_plane(crtc->primary, fb);
-	if (ret < 0)
-		return ret;
-
-	crtc_w = fb->width - x;
-	crtc_h = fb->height - y;
-	exynos_plane_mode_set(crtc->primary, crtc, fb, 0, 0,
-			      crtc_w, crtc_h, x, y, crtc_w, crtc_h);
+	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
 
-	return 0;
+	if (exynos_crtc->ops->commit)
+		exynos_crtc->ops->commit(exynos_crtc);
 }
 
-static int exynos_drm_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
-					  struct drm_framebuffer *old_fb)
+static void exynos_crtc_atomic_begin(struct drm_crtc *crtc)
 {
 	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
-	struct drm_framebuffer *fb = crtc->primary->fb;
-	unsigned int crtc_w;
-	unsigned int crtc_h;
 
-	/* when framebuffer changing is requested, crtc's dpms should be on */
-	if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
-		DRM_ERROR("failed framebuffer changing request.\n");
-		return -EPERM;
+	if (crtc->state->event) {
+		WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+		exynos_crtc->event = crtc->state->event;
 	}
-
-	crtc_w = fb->width - x;
-	crtc_h = fb->height - y;
-
-	return exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
-				   crtc_w, crtc_h, x, y, crtc_w, crtc_h);
 }
 
-static void exynos_drm_crtc_disable(struct drm_crtc *crtc)
+static void exynos_crtc_atomic_flush(struct drm_crtc *crtc)
 {
-	struct drm_plane *plane;
-	int ret;
-
-	exynos_drm_crtc_dpms(crtc, DRM_MODE_DPMS_OFF);
-
-	drm_for_each_legacy_plane(plane, &crtc->dev->mode_config.plane_list) {
-		if (plane->crtc != crtc)
-			continue;
-
-		ret = plane->funcs->disable_plane(plane);
-		if (ret)
-			DRM_ERROR("Failed to disable plane %d\n", ret);
-	}
 }
 
 static struct drm_crtc_helper_funcs exynos_crtc_helper_funcs = {
-	.dpms		= exynos_drm_crtc_dpms,
-	.prepare	= exynos_drm_crtc_prepare,
-	.commit		= exynos_drm_crtc_commit,
-	.mode_fixup	= exynos_drm_crtc_mode_fixup,
-	.mode_set	= exynos_drm_crtc_mode_set,
-	.mode_set_base	= exynos_drm_crtc_mode_set_base,
+	.enable		= exynos_drm_crtc_enable,
 	.disable	= exynos_drm_crtc_disable,
+	.mode_fixup	= exynos_drm_crtc_mode_fixup,
+	.mode_set_nofb	= exynos_drm_crtc_mode_set_nofb,
+	.atomic_begin	= exynos_crtc_atomic_begin,
+	.atomic_flush	= exynos_crtc_atomic_flush,
 };
 
-static int exynos_drm_crtc_page_flip(struct drm_crtc *crtc,
-				     struct drm_framebuffer *fb,
-				     struct drm_pending_vblank_event *event,
-				     uint32_t page_flip_flags)
-{
-	struct drm_device *dev = crtc->dev;
-	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
-	struct drm_framebuffer *old_fb = crtc->primary->fb;
-	unsigned int crtc_w, crtc_h;
-	int ret;
-
-	/* when the page flip is requested, crtc's dpms should be on */
-	if (exynos_crtc->dpms > DRM_MODE_DPMS_ON) {
-		DRM_ERROR("failed page flip request.\n");
-		return -EINVAL;
-	}
-
-	if (!event)
-		return -EINVAL;
-
-	spin_lock_irq(&dev->event_lock);
-	if (exynos_crtc->event) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	ret = drm_vblank_get(dev, exynos_crtc->pipe);
-	if (ret) {
-		DRM_DEBUG("failed to acquire vblank counter\n");
-		goto out;
-	}
-
-	exynos_crtc->event = event;
-	spin_unlock_irq(&dev->event_lock);
-
-	/*
-	 * the pipe from user always is 0 so we can set pipe number
-	 * of current owner to event.
-	 */
-	event->pipe = exynos_crtc->pipe;
-
-	crtc->primary->fb = fb;
-	crtc_w = fb->width - crtc->x;
-	crtc_h = fb->height - crtc->y;
-	ret = exynos_update_plane(crtc->primary, crtc, fb, 0, 0,
-				  crtc_w, crtc_h, crtc->x, crtc->y,
-				  crtc_w, crtc_h);
-	if (ret) {
-		crtc->primary->fb = old_fb;
-		spin_lock_irq(&dev->event_lock);
-		exynos_crtc->event = NULL;
-		drm_vblank_put(dev, exynos_crtc->pipe);
-		spin_unlock_irq(&dev->event_lock);
-		return ret;
-	}
-
-	return 0;
-
-out:
-	spin_unlock_irq(&dev->event_lock);
-	return ret;
-}
-
 static void exynos_drm_crtc_destroy(struct drm_crtc *crtc)
 {
 	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
@@ -232,9 +115,12 @@ static void exynos_drm_crtc_destroy(struct drm_crtc *crtc)
 }
 
 static struct drm_crtc_funcs exynos_crtc_funcs = {
-	.set_config	= drm_crtc_helper_set_config,
-	.page_flip	= exynos_drm_crtc_page_flip,
+	.set_config	= drm_atomic_helper_set_config,
+	.page_flip	= drm_atomic_helper_page_flip,
 	.destroy	= exynos_drm_crtc_destroy,
+	.reset = drm_atomic_helper_crtc_reset,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
 };
 
 struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev,
@@ -255,7 +141,6 @@ struct exynos_drm_crtc *exynos_drm_crtc_create(struct drm_device *drm_dev,
 
 	init_waitqueue_head(&exynos_crtc->pending_flip_queue);
 
-	exynos_crtc->dpms = DRM_MODE_DPMS_OFF;
 	exynos_crtc->pipe = pipe;
 	exynos_crtc->type = type;
 	exynos_crtc->ops = ops;
@@ -286,7 +171,7 @@ int exynos_drm_crtc_enable_vblank(struct drm_device *dev, int pipe)
 	struct exynos_drm_crtc *exynos_crtc =
 		to_exynos_crtc(private->crtc[pipe]);
 
-	if (exynos_crtc->dpms != DRM_MODE_DPMS_ON)
+	if (!exynos_crtc->enabled)
 		return -EPERM;
 
 	if (exynos_crtc->ops->enable_vblank)
@@ -301,7 +186,7 @@ void exynos_drm_crtc_disable_vblank(struct drm_device *dev, int pipe)
 	struct exynos_drm_crtc *exynos_crtc =
 		to_exynos_crtc(private->crtc[pipe]);
 
-	if (exynos_crtc->dpms != DRM_MODE_DPMS_ON)
+	if (!exynos_crtc->enabled)
 		return;
 
 	if (exynos_crtc->ops->disable_vblank)

drivers/gpu/drm/exynos/exynos_drm_dpi.c

@@ -13,6 +13,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_panel.h>
+#include <drm/drm_atomic_helper.h>
 
 #include <linux/regulator/consumer.h>
 
@@ -59,10 +60,13 @@ static void exynos_dpi_connector_destroy(struct drm_connector *connector)
 }
 
 static struct drm_connector_funcs exynos_dpi_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = drm_atomic_helper_connector_dpms,
 	.detect = exynos_dpi_detect,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.destroy = exynos_dpi_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
 static int exynos_dpi_get_modes(struct drm_connector *connector)
@@ -309,33 +313,19 @@ struct exynos_drm_display *exynos_dpi_probe(struct device *dev)
 	ctx->dev = dev;
 	ctx->dpms_mode = DRM_MODE_DPMS_OFF;
 
-	ret = exynos_drm_component_add(dev,
-					EXYNOS_DEVICE_TYPE_CONNECTOR,
-					ctx->display.type);
-	if (ret)
-		return ERR_PTR(ret);
-
 	ret = exynos_dpi_parse_dt(ctx);
 	if (ret < 0) {
 		devm_kfree(dev, ctx);
-		goto err_del_component;
+		return NULL;
 	}
 
 	if (ctx->panel_node) {
 		ctx->panel = of_drm_find_panel(ctx->panel_node);
-		if (!ctx->panel) {
-			exynos_drm_component_del(dev,
-						EXYNOS_DEVICE_TYPE_CONNECTOR);
+		if (!ctx->panel)
 			return ERR_PTR(-EPROBE_DEFER);
 	}
-	}
 
 	return &ctx->display;
-
-err_del_component:
-	exynos_drm_component_del(dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
-
-	return NULL;
 }
 
 int exynos_dpi_remove(struct exynos_drm_display *display)
@@ -347,7 +337,5 @@ int exynos_dpi_remove(struct exynos_drm_display *display)
 	if (ctx->panel)
 		drm_panel_detach(ctx->panel);
 
-	exynos_drm_component_del(ctx->dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
-
 	return 0;
 }

drivers/gpu/drm/exynos/exynos_drm_drv.h

@@ -25,13 +25,6 @@
 #define to_exynos_crtc(x)	container_of(x, struct exynos_drm_crtc, base)
 #define to_exynos_plane(x)	container_of(x, struct exynos_drm_plane, base)
 
-/* This enumerates device type. */
-enum exynos_drm_device_type {
-	EXYNOS_DEVICE_TYPE_NONE,
-	EXYNOS_DEVICE_TYPE_CRTC,
-	EXYNOS_DEVICE_TYPE_CONNECTOR,
-};
-
 /* this enumerates display type. */
 enum exynos_drm_output_type {
 	EXYNOS_DISPLAY_TYPE_NONE,
@@ -71,8 +64,6 @@ enum exynos_drm_output_type {
  * @dma_addr: array of bus(accessed by dma) address to the memory region
  *	      allocated for a overlay.
  * @zpos: order of overlay layer(z position).
- * @enabled: enabled or not.
- * @resume: to resume or not.
  *
  * this structure is common to exynos SoC and its contents would be copied
  * to hardware specific overlay info.
@@ -101,9 +92,6 @@ struct exynos_drm_plane {
 	uint32_t pixel_format;
 	dma_addr_t dma_addr[MAX_FB_BUFFER];
 	unsigned int zpos;
-
-	bool enabled:1;
-	bool resume:1;
 };
 
 /*
@@ -157,7 +145,8 @@ struct exynos_drm_display {
 /*
  * Exynos drm crtc ops
  *
- * @dpms: control device power.
+ * @enable: enable the device
+ * @disable: disable the device
  * @mode_fixup: fix mode data before applying it
  * @commit: set current hw specific display mode to hw.
  * @enable_vblank: specific driver callback for enabling vblank interrupt.
@@ -175,7 +164,8 @@ struct exynos_drm_display {
  */
 struct exynos_drm_crtc;
 struct exynos_drm_crtc_ops {
-	void (*dpms)(struct exynos_drm_crtc *crtc, int mode);
+	void (*enable)(struct exynos_drm_crtc *crtc);
+	void (*disable)(struct exynos_drm_crtc *crtc);
 	bool (*mode_fixup)(struct exynos_drm_crtc *crtc,
 				const struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode);
@@ -187,6 +177,7 @@ struct exynos_drm_crtc_ops {
 	void (*win_disable)(struct exynos_drm_crtc *crtc, unsigned int zpos);
 	void (*te_handler)(struct exynos_drm_crtc *crtc);
 	void (*clock_enable)(struct exynos_drm_crtc *crtc, bool enable);
+	void (*clear_channels)(struct exynos_drm_crtc *crtc);
 };
 
 /*
@@ -201,7 +192,7 @@ struct exynos_drm_crtc_ops {
  *	drm framework doesn't support multiple irq yet.
  *	we can refer to the crtc to current hardware interrupt occurred through
  *	this pipe value.
- * @dpms: store the crtc dpms value
+ * @enabled: if the crtc is enabled or not
  * @event: vblank event that is currently queued for flip
  * @ops: pointer to callbacks for exynos drm specific functionality
  * @ctx: A pointer to the crtc's implementation specific context
@@ -210,7 +201,7 @@ struct exynos_drm_crtc {
 	struct drm_crtc			base;
 	enum exynos_drm_output_type	type;
 	unsigned int			pipe;
-	unsigned int			dpms;
+	bool				enabled;
 	wait_queue_head_t		pending_flip_queue;
 	struct drm_pending_vblank_event	*event;
 	const struct exynos_drm_crtc_ops	*ops;
@@ -293,15 +284,6 @@ int exynos_drm_device_subdrv_remove(struct drm_device *dev);
 int exynos_drm_subdrv_open(struct drm_device *dev, struct drm_file *file);
 void exynos_drm_subdrv_close(struct drm_device *dev, struct drm_file *file);
 
-#ifdef CONFIG_DRM_EXYNOS_IPP
-int exynos_platform_device_ipp_register(void);
-void exynos_platform_device_ipp_unregister(void);
-#else
-static inline int exynos_platform_device_ipp_register(void) { return 0; }
-static inline void exynos_platform_device_ipp_unregister(void) {}
-#endif
-
-
 #ifdef CONFIG_DRM_EXYNOS_DPI
 struct exynos_drm_display * exynos_dpi_probe(struct device *dev);
 int exynos_dpi_remove(struct exynos_drm_display *display);
@@ -314,26 +296,12 @@ static inline int exynos_dpi_remove(struct exynos_drm_display *display)
 }
 #endif
 
-#ifdef CONFIG_DRM_EXYNOS_VIDI
-int exynos_drm_probe_vidi(void);
-void exynos_drm_remove_vidi(void);
-#else
-static inline int exynos_drm_probe_vidi(void) { return 0; }
-static inline void exynos_drm_remove_vidi(void) {}
-#endif
-
 /* This function creates a encoder and a connector, and initializes them. */
 int exynos_drm_create_enc_conn(struct drm_device *dev,
 				struct exynos_drm_display *display);
 
-int exynos_drm_component_add(struct device *dev,
-				enum exynos_drm_device_type dev_type,
-				enum exynos_drm_output_type out_type);
-
-void exynos_drm_component_del(struct device *dev,
-				enum exynos_drm_device_type dev_type);
-
 extern struct platform_driver fimd_driver;
+extern struct platform_driver exynos5433_decon_driver;
 extern struct platform_driver decon_driver;
 extern struct platform_driver dp_driver;
 extern struct platform_driver dsi_driver;
@@ -346,4 +314,5 @@ extern struct platform_driver fimc_driver;
 extern struct platform_driver rotator_driver;
 extern struct platform_driver gsc_driver;
 extern struct platform_driver ipp_driver;
+extern struct platform_driver mic_driver;
 #endif

drivers/gpu/drm/exynos/exynos_drm_encoder.c

@@ -32,17 +32,6 @@ struct exynos_drm_encoder {
 	struct exynos_drm_display	*display;
 };
 
-static void exynos_drm_encoder_dpms(struct drm_encoder *encoder, int mode)
-{
-	struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
-	struct exynos_drm_display *display = exynos_encoder->display;
-
-	DRM_DEBUG_KMS("encoder dpms: %d\n", mode);
-
-	if (display->ops->dpms)
-		display->ops->dpms(display, mode);
-}
-
 static bool
 exynos_drm_encoder_mode_fixup(struct drm_encoder *encoder,
 			       const struct drm_display_mode *mode,
@@ -76,12 +65,7 @@ static void exynos_drm_encoder_mode_set(struct drm_encoder *encoder,
 		display->ops->mode_set(display, adjusted_mode);
 }
 
-static void exynos_drm_encoder_prepare(struct drm_encoder *encoder)
-{
-	/* drm framework doesn't check NULL. */
-}
-
-static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
+static void exynos_drm_encoder_enable(struct drm_encoder *encoder)
 {
 	struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
 	struct exynos_drm_display *display = exynos_encoder->display;
@@ -95,24 +79,17 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder)
 
 static void exynos_drm_encoder_disable(struct drm_encoder *encoder)
 {
-	struct drm_plane *plane;
-	struct drm_device *dev = encoder->dev;
-
-	exynos_drm_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
+	struct exynos_drm_encoder *exynos_encoder = to_exynos_encoder(encoder);
+	struct exynos_drm_display *display = exynos_encoder->display;
 
-	/* all planes connected to this encoder should be also disabled. */
-	drm_for_each_legacy_plane(plane, &dev->mode_config.plane_list) {
-		if (plane->crtc && (plane->crtc == encoder->crtc))
-			plane->funcs->disable_plane(plane);
-	}
+	if (display->ops->dpms)
+		display->ops->dpms(display, DRM_MODE_DPMS_OFF);
 }
 
 static struct drm_encoder_helper_funcs exynos_encoder_helper_funcs = {
-	.dpms		= exynos_drm_encoder_dpms,
 	.mode_fixup	= exynos_drm_encoder_mode_fixup,
 	.mode_set	= exynos_drm_encoder_mode_set,
-	.prepare	= exynos_drm_encoder_prepare,
-	.commit		= exynos_drm_encoder_commit,
+	.enable		= exynos_drm_encoder_enable,
 	.disable	= exynos_drm_encoder_disable,
 };
 

drivers/gpu/drm/exynos/exynos_drm_fb.c

@@ -16,6 +16,8 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
 #include <uapi/drm/exynos_drm.h>
 
 #include "exynos_drm_drv.h"
@@ -265,9 +267,46 @@ static void exynos_drm_output_poll_changed(struct drm_device *dev)
 		exynos_drm_fbdev_init(dev);
 }
 
+static int exynos_atomic_commit(struct drm_device *dev,
+				struct drm_atomic_state *state,
+				bool async)
+{
+	int ret;
+
+	ret = drm_atomic_helper_prepare_planes(dev, state);
+	if (ret)
+		return ret;
+
+	/* This is the point of no return */
+
+	drm_atomic_helper_swap_state(dev, state);
+
+	drm_atomic_helper_commit_modeset_disables(dev, state);
+
+	drm_atomic_helper_commit_modeset_enables(dev, state);
+
+	/*
+	 * Exynos can't update planes with CRTCs and encoders disabled,
+	 * its updates routines, specially for FIMD, requires the clocks
+	 * to be enabled. So it is necessary to handle the modeset operations
+	 * *before* the commit_planes() step, this way it will always
+	 * have the relevant clocks enabled to perform the update.
+	 */
+
+	drm_atomic_helper_commit_planes(dev, state);
+
+	drm_atomic_helper_cleanup_planes(dev, state);
+
+	drm_atomic_state_free(state);
+
+	return 0;
+}
+
 static const struct drm_mode_config_funcs exynos_drm_mode_config_funcs = {
 	.fb_create = exynos_user_fb_create,
 	.output_poll_changed = exynos_drm_output_poll_changed,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = exynos_atomic_commit,
 };
 
 void exynos_drm_mode_config_init(struct drm_device *dev)

drivers/gpu/drm/exynos/exynos_drm_fbdev.c

@@ -275,9 +275,6 @@ int exynos_drm_fbdev_init(struct drm_device *dev)
 
 	}
 
-	/* disable all the possible outputs/crtcs before entering KMS mode */
-	drm_helper_disable_unused_functions(dev);
-
 	ret = drm_fb_helper_initial_config(helper, PREFERRED_BPP);
 	if (ret < 0) {
 		DRM_ERROR("failed to set up hw configuration.\n");

drivers/gpu/drm/exynos/exynos_drm_gem.h

@@ -61,7 +61,6 @@ struct exynos_drm_gem_buf {
  *	or at framebuffer creation.
  * @size: size requested from user, in bytes and this size is aligned
  *	in page unit.
- * @vma: a pointer to vm_area.
  * @flags: indicate memory type to allocated buffer and cache attruibute.
  *
  * P.S. this object would be transferred to user as kms_bo.handle so
@@ -71,7 +70,6 @@ struct exynos_drm_gem_obj {
 	struct drm_gem_object		base;
 	struct exynos_drm_gem_buf	*buffer;
 	unsigned long			size;
-	struct vm_area_struct		*vma;
 	unsigned int			flags;
 };
 

drivers/gpu/drm/exynos/exynos_drm_iommu.c

@@ -100,6 +100,9 @@ int drm_iommu_attach_device(struct drm_device *drm_dev,
 
 	dma_set_max_seg_size(subdrv_dev, 0xffffffffu);
 
+	if (subdrv_dev->archdata.mapping)
+		arm_iommu_detach_device(subdrv_dev);
+
 	ret = arm_iommu_attach_device(subdrv_dev, dev->archdata.mapping);
 	if (ret < 0) {
 		DRM_DEBUG_KMS("failed iommu attach.\n");
@@ -114,8 +117,8 @@ int drm_iommu_attach_device(struct drm_device *drm_dev,
 	 * If iommu attach succeeded, the sub driver would have dma_ops
 	 * for iommu and also all sub drivers have same dma_ops.
 	 */
-	if (!dev->archdata.dma_ops)
-		dev->archdata.dma_ops = subdrv_dev->archdata.dma_ops;
+	if (get_dma_ops(dev) == get_dma_ops(NULL))
+		set_dma_ops(dev, get_dma_ops(subdrv_dev));
 
 	return 0;
 }
@@ -141,3 +144,17 @@ void drm_iommu_detach_device(struct drm_device *drm_dev,
 	iommu_detach_device(mapping->domain, subdrv_dev);
 	drm_release_iommu_mapping(drm_dev);
 }
+
+int drm_iommu_attach_device_if_possible(struct exynos_drm_crtc *exynos_crtc,
+			struct drm_device *drm_dev, struct device *subdrv_dev)
+{
+	int ret = 0;
+
+	if (is_drm_iommu_supported(drm_dev)) {
+		if (exynos_crtc->ops->clear_channels)
+			exynos_crtc->ops->clear_channels(exynos_crtc);
+		return drm_iommu_attach_device(drm_dev, subdrv_dev);
+	}
+
+	return ret;
+}

drivers/gpu/drm/exynos/exynos_drm_iommu.h

@@ -38,6 +38,10 @@ static inline bool is_drm_iommu_supported(struct drm_device *drm_dev)
 #endif
 }
 
+int drm_iommu_attach_device_if_possible(
+		struct exynos_drm_crtc *exynos_crtc, struct drm_device *drm_dev,
+		struct device *subdrv_dev);
+
 #else
 
 static inline int drm_create_iommu_mapping(struct drm_device *drm_dev)
@@ -65,5 +69,12 @@ static inline bool is_drm_iommu_supported(struct drm_device *drm_dev)
 	return false;
 }
 
+static inline int drm_iommu_attach_device_if_possible(
+		struct exynos_drm_crtc *exynos_crtc, struct drm_device *drm_dev,
+		struct device *subdrv_dev)
+{
+	return 0;
+}
+
 #endif
 #endif

drivers/gpu/drm/exynos/exynos_drm_ipp.c

@@ -45,9 +45,6 @@
 #define get_ipp_context(dev)	platform_get_drvdata(to_platform_device(dev))
 #define ipp_is_m2m_cmd(c)	(c == IPP_CMD_M2M)
 
-/* platform device pointer for ipp device. */
-static struct platform_device *exynos_drm_ipp_pdev;
-
 /*
  * A structure of event.
  *
@@ -102,30 +99,6 @@ static LIST_HEAD(exynos_drm_ippdrv_list);
 static DEFINE_MUTEX(exynos_drm_ippdrv_lock);
 static BLOCKING_NOTIFIER_HEAD(exynos_drm_ippnb_list);
 
-int exynos_platform_device_ipp_register(void)
-{
-	struct platform_device *pdev;
-
-	if (exynos_drm_ipp_pdev)
-		return -EEXIST;
-
-	pdev = platform_device_register_simple("exynos-drm-ipp", -1, NULL, 0);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	exynos_drm_ipp_pdev = pdev;
-
-	return 0;
-}
-
-void exynos_platform_device_ipp_unregister(void)
-{
-	if (exynos_drm_ipp_pdev) {
-		platform_device_unregister(exynos_drm_ipp_pdev);
-		exynos_drm_ipp_pdev = NULL;
-	}
-}
-
 int exynos_drm_ippdrv_register(struct exynos_drm_ippdrv *ippdrv)
 {
 	mutex_lock(&exynos_drm_ippdrv_lock);
@@ -482,12 +455,11 @@ static int ipp_validate_mem_node(struct drm_device *drm_dev,
 {
 	struct drm_exynos_ipp_config *ipp_cfg;
 	unsigned int num_plane;
-	unsigned long min_size, size;
-	unsigned int bpp;
+	unsigned long size, buf_size = 0, plane_size, img_size = 0;
+	unsigned int bpp, width, height;
 	int i;
 
-	/* The property id should already be varified */
-	ipp_cfg = &c_node->property.config[m_node->prop_id];
+	ipp_cfg = &c_node->property.config[m_node->ops_id];
 	num_plane = drm_format_num_planes(ipp_cfg->fmt);
 
 	/**
@@ -498,20 +470,45 @@ static int ipp_validate_mem_node(struct drm_device *drm_dev,
 	 * but it seems more than enough
 	 */
 	for (i = 0; i < num_plane; ++i) {
-		if (!m_node->buf_info.handles[i]) {
-			DRM_ERROR("invalid handle for plane %d\n", i);
-			return -EINVAL;
-		}
+		width = ipp_cfg->sz.hsize;
+		height = ipp_cfg->sz.vsize;
 		bpp = drm_format_plane_cpp(ipp_cfg->fmt, i);
-		min_size = (ipp_cfg->sz.hsize * ipp_cfg->sz.vsize * bpp) >> 3;
+
+		/*
+		 * The result of drm_format_plane_cpp() for chroma planes must
+		 * be used with drm_format_xxxx_chroma_subsampling() for
+		 * correct result.
+		 */
+		if (i > 0) {
+			width /= drm_format_horz_chroma_subsampling(
+								ipp_cfg->fmt);
+			height /= drm_format_vert_chroma_subsampling(
+								ipp_cfg->fmt);
+		}
+		plane_size = width * height * bpp;
+		img_size += plane_size;
+
+		if (m_node->buf_info.handles[i]) {
 			size = exynos_drm_gem_get_size(drm_dev,
 					m_node->buf_info.handles[i],
 					c_node->filp);
-		if (min_size > size) {
-			DRM_ERROR("invalid size for plane %d\n", i);
+			if (plane_size > size) {
+				DRM_ERROR(
+					"buffer %d is smaller than required\n",
+					i);
 				return -EINVAL;
 			}
+
+			buf_size += size;
+		}
+	}
+
+	if (buf_size < img_size) {
+		DRM_ERROR("size of buffers(%lu) is smaller than image(%lu)\n",
+			buf_size, img_size);
+		return -EINVAL;
 	}
+
 	return 0;
 }
 

drivers/gpu/drm/exynos/exynos_drm_plane.c

@@ -13,6 +13,7 @@
 
 #include <drm/exynos_drm.h>
 #include <drm/drm_plane_helper.h>
+#include <drm/drm_atomic_helper.h>
 #include "exynos_drm_drv.h"
 #include "exynos_drm_crtc.h"
 #include "exynos_drm_fb.h"
@@ -61,42 +62,21 @@ static int exynos_plane_get_size(int start, unsigned length, unsigned last)
 	return size;
 }
 
-int exynos_check_plane(struct drm_plane *plane, struct drm_framebuffer *fb)
-{
-	struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
-	int nr;
-	int i;
-
-	nr = exynos_drm_fb_get_buf_cnt(fb);
-	for (i = 0; i < nr; i++) {
-		struct exynos_drm_gem_buf *buffer = exynos_drm_fb_buffer(fb, i);
-
-		if (!buffer) {
-			DRM_DEBUG_KMS("buffer is null\n");
-			return -EFAULT;
-		}
-
-		exynos_plane->dma_addr[i] = buffer->dma_addr + fb->offsets[i];
-
-		DRM_DEBUG_KMS("buffer: %d, dma_addr = 0x%lx\n",
-				i, (unsigned long)exynos_plane->dma_addr[i]);
-	}
-
-	return 0;
-}
-
-void exynos_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc,
-			  struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+static void exynos_plane_mode_set(struct drm_plane *plane,
+				  struct drm_crtc *crtc,
+				  struct drm_framebuffer *fb,
+				  int crtc_x, int crtc_y,
 				  unsigned int crtc_w, unsigned int crtc_h,
 				  uint32_t src_x, uint32_t src_y,
 				  uint32_t src_w, uint32_t src_h)
 {
 	struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
+	struct drm_display_mode *mode = &crtc->state->adjusted_mode;
 	unsigned int actual_w;
 	unsigned int actual_h;
 
-	actual_w = exynos_plane_get_size(crtc_x, crtc_w, crtc->mode.hdisplay);
-	actual_h = exynos_plane_get_size(crtc_y, crtc_h, crtc->mode.vdisplay);
+	actual_w = exynos_plane_get_size(crtc_x, crtc_w, mode->hdisplay);
+	actual_h = exynos_plane_get_size(crtc_y, crtc_h, mode->vdisplay);
 
 	if (crtc_x < 0) {
 		if (actual_w)
@@ -132,10 +112,10 @@ void exynos_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc,
 	exynos_plane->crtc_height = actual_h;
 
 	/* set drm mode data. */
-	exynos_plane->mode_width = crtc->mode.hdisplay;
-	exynos_plane->mode_height = crtc->mode.vdisplay;
-	exynos_plane->refresh = crtc->mode.vrefresh;
-	exynos_plane->scan_flag = crtc->mode.flags;
+	exynos_plane->mode_width = mode->hdisplay;
+	exynos_plane->mode_height = mode->vdisplay;
+	exynos_plane->refresh = mode->vrefresh;
+	exynos_plane->scan_flag = mode->flags;
 
 	DRM_DEBUG_KMS("plane : offset_x/y(%d,%d), width/height(%d,%d)",
 			exynos_plane->crtc_x, exynos_plane->crtc_y,
@@ -144,48 +124,83 @@ void exynos_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc,
 	plane->crtc = crtc;
 }
 
-int
-exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
-		     struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-		     unsigned int crtc_w, unsigned int crtc_h,
-		     uint32_t src_x, uint32_t src_y,
-		     uint32_t src_w, uint32_t src_h)
+static struct drm_plane_funcs exynos_plane_funcs = {
+	.update_plane	= drm_atomic_helper_update_plane,
+	.disable_plane	= drm_atomic_helper_disable_plane,
+	.destroy	= drm_plane_cleanup,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+};
+
+static int exynos_plane_atomic_check(struct drm_plane *plane,
+				     struct drm_plane_state *state)
 {
+	struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
+	int nr;
+	int i;
+
+	if (!state->fb)
+		return 0;
+
+	nr = exynos_drm_fb_get_buf_cnt(state->fb);
+	for (i = 0; i < nr; i++) {
+		struct exynos_drm_gem_buf *buffer =
+					exynos_drm_fb_buffer(state->fb, i);
+
+		if (!buffer) {
+			DRM_DEBUG_KMS("buffer is null\n");
+			return -EFAULT;
+		}
+
+		exynos_plane->dma_addr[i] = buffer->dma_addr +
+					    state->fb->offsets[i];
+
+		DRM_DEBUG_KMS("buffer: %d, dma_addr = 0x%lx\n",
+				i, (unsigned long)exynos_plane->dma_addr[i]);
+	}
 
-	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
+	return 0;
+}
+
+static void exynos_plane_atomic_update(struct drm_plane *plane,
+				       struct drm_plane_state *old_state)
+{
+	struct drm_plane_state *state = plane->state;
+	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(state->crtc);
 	struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
-	int ret;
 
-	ret = exynos_check_plane(plane, fb);
-	if (ret < 0)
-		return ret;
+	if (!state->crtc)
+		return;
 
-	exynos_plane_mode_set(plane, crtc, fb, crtc_x, crtc_y,
-			      crtc_w, crtc_h, src_x >> 16, src_y >> 16,
-			      src_w >> 16, src_h >> 16);
+	exynos_plane_mode_set(plane, state->crtc, state->fb,
+			      state->crtc_x, state->crtc_y,
+			      state->crtc_w, state->crtc_h,
+			      state->src_x >> 16, state->src_y >> 16,
+			      state->src_w >> 16, state->src_h >> 16);
 
 	if (exynos_crtc->ops->win_commit)
 		exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
-
-	return 0;
 }
 
-static int exynos_disable_plane(struct drm_plane *plane)
+static void exynos_plane_atomic_disable(struct drm_plane *plane,
+					struct drm_plane_state *old_state)
 {
 	struct exynos_drm_plane *exynos_plane = to_exynos_plane(plane);
-	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(plane->crtc);
+	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(old_state->crtc);
 
-	if (exynos_crtc && exynos_crtc->ops->win_disable)
+	if (!old_state->crtc)
+		return;
+
+	if (exynos_crtc->ops->win_disable)
 		exynos_crtc->ops->win_disable(exynos_crtc,
 					      exynos_plane->zpos);
-
-	return 0;
 }
 
-static struct drm_plane_funcs exynos_plane_funcs = {
-	.update_plane	= exynos_update_plane,
-	.disable_plane	= exynos_disable_plane,
-	.destroy	= drm_plane_cleanup,
+static const struct drm_plane_helper_funcs plane_helper_funcs = {
+	.atomic_check = exynos_plane_atomic_check,
+	.atomic_update = exynos_plane_atomic_update,
+	.atomic_disable = exynos_plane_atomic_disable,
 };
 
 static void exynos_plane_attach_zpos_property(struct drm_plane *plane,
@@ -223,6 +238,8 @@ int exynos_plane_init(struct drm_device *dev,
 		return err;
 	}
 
+	drm_plane_helper_add(&exynos_plane->base, &plane_helper_funcs);
+
 	exynos_plane->zpos = zpos;
 
 	if (type == DRM_PLANE_TYPE_OVERLAY)

drivers/gpu/drm/exynos/exynos_drm_plane.h

@@ -9,17 +9,6 @@
  *
  */
 
-int exynos_check_plane(struct drm_plane *plane, struct drm_framebuffer *fb);
-void exynos_plane_mode_set(struct drm_plane *plane, struct drm_crtc *crtc,
-			   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-			   unsigned int crtc_w, unsigned int crtc_h,
-			   uint32_t src_x, uint32_t src_y,
-			   uint32_t src_w, uint32_t src_h);
-int exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
-			struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-			unsigned int crtc_w, unsigned int crtc_h,
-			uint32_t src_x, uint32_t src_y,
-			uint32_t src_w, uint32_t src_h);
 int exynos_plane_init(struct drm_device *dev,
 		      struct exynos_drm_plane *exynos_plane,
 		      unsigned long possible_crtcs, enum drm_plane_type type,

drivers/gpu/drm/exynos/exynos_hdmi.c

@@ -17,6 +17,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_atomic_helper.h>
 
 #include "regs-hdmi.h"
 
@@ -1050,10 +1051,13 @@ static void hdmi_connector_destroy(struct drm_connector *connector)
 }
 
 static struct drm_connector_funcs hdmi_connector_funcs = {
-	.dpms = drm_helper_connector_dpms,
+	.dpms = drm_atomic_helper_connector_dpms,
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.detect = hdmi_detect,
 	.destroy = hdmi_connector_destroy,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
 static int hdmi_get_modes(struct drm_connector *connector)
@@ -2123,8 +2127,8 @@ static void hdmi_dpms(struct exynos_drm_display *display, int mode)
 		 */
 		if (crtc)
 			funcs = crtc->helper_private;
-		if (funcs && funcs->dpms)
-			(*funcs->dpms)(crtc, mode);
+		if (funcs && funcs->disable)
+			(*funcs->disable)(crtc);
 
 		hdmi_poweroff(hdata);
 		break;
@@ -2356,20 +2360,13 @@ static int hdmi_probe(struct platform_device *pdev)
 	hdata->display.type = EXYNOS_DISPLAY_TYPE_HDMI;
 	hdata->display.ops = &hdmi_display_ops;
 
-	ret = exynos_drm_component_add(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR,
-					hdata->display.type);
-	if (ret)
-		return ret;
-
 	mutex_init(&hdata->hdmi_mutex);
 
 	platform_set_drvdata(pdev, hdata);
 
 	match = of_match_node(hdmi_match_types, dev->of_node);
-	if (!match) {
-		ret = -ENODEV;
-		goto err_del_component;
-	}
+	if (!match)
+		return -ENODEV;
 
 	drv_data = (struct hdmi_driver_data *)match->data;
 	hdata->type = drv_data->type;
@@ -2389,13 +2386,13 @@ static int hdmi_probe(struct platform_device *pdev)
 	hdata->regs = devm_ioremap_resource(dev, res);
 	if (IS_ERR(hdata->regs)) {
 		ret = PTR_ERR(hdata->regs);
-		goto err_del_component;
+		return ret;
 	}
 
 	ret = devm_gpio_request(dev, hdata->hpd_gpio, "HPD");
 	if (ret) {
 		DRM_ERROR("failed to request HPD gpio\n");
-		goto err_del_component;
+		return ret;
 	}
 
 	ddc_node = hdmi_legacy_ddc_dt_binding(dev);
@@ -2406,8 +2403,7 @@ static int hdmi_probe(struct platform_device *pdev)
 	ddc_node = of_parse_phandle(dev->of_node, "ddc", 0);
 	if (!ddc_node) {
 		DRM_ERROR("Failed to find ddc node in device tree\n");
-		ret = -ENODEV;
-		goto err_del_component;
+		return -ENODEV;
 	}
 
 out_get_ddc_adpt:
@@ -2491,9 +2487,6 @@ static int hdmi_probe(struct platform_device *pdev)
 err_ddc:
 	put_device(&hdata->ddc_adpt->dev);
 
-err_del_component:
-	exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
-
 	return ret;
 }
 
@@ -2513,7 +2506,6 @@ static int hdmi_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	component_del(&pdev->dev, &hdmi_component_ops);
 
-	exynos_drm_component_del(&pdev->dev, EXYNOS_DEVICE_TYPE_CONNECTOR);
 	return 0;
 }
 

drivers/of/base.c

@@ -2232,6 +2232,39 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 }
 EXPORT_SYMBOL(of_graph_get_next_endpoint);
 
+/**
+ * of_graph_get_endpoint_by_regs() - get endpoint node of specific identifiers
+ * @parent: pointer to the parent device node
+ * @port_reg: identifier (value of reg property) of the parent port node
+ * @reg: identifier (value of reg property) of the endpoint node
+ *
+ * Return: An 'endpoint' node pointer which is identified by reg and at the same
+ * is the child of a port node identified by port_reg. reg and port_reg are
+ * ignored when they are -1.
+ */
+struct device_node *of_graph_get_endpoint_by_regs(
+	const struct device_node *parent, int port_reg, int reg)
+{
+	struct of_endpoint endpoint;
+	struct device_node *node, *prev_node = NULL;
+
+	while (1) {
+		node = of_graph_get_next_endpoint(parent, prev_node);
+		of_node_put(prev_node);
+		if (!node)
+			break;
+
+		of_graph_parse_endpoint(node, &endpoint);
+		if (((port_reg == -1) || (endpoint.port == port_reg)) &&
+			((reg == -1) || (endpoint.id == reg)))
+			return node;
+
+		prev_node = node;
+	}
+
+	return NULL;
+}
+
 /**
  * of_graph_get_remote_port_parent() - get remote port's parent node
  * @node: pointer to a local endpoint device_node

include/linux/of_graph.h

@@ -45,6 +45,8 @@ int of_graph_parse_endpoint(const struct device_node *node,
 struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
 struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 					struct device_node *previous);
+struct device_node *of_graph_get_endpoint_by_regs(
+		const struct device_node *parent, int port_reg, int reg);
 struct device_node *of_graph_get_remote_port_parent(
 					const struct device_node *node);
 struct device_node *of_graph_get_remote_port(const struct device_node *node);
@@ -69,6 +71,12 @@ static inline struct device_node *of_graph_get_next_endpoint(
 	return NULL;
 }
 
+struct device_node *of_graph_get_endpoint_by_regs(
+		const struct device_node *parent, int port_reg, int reg)
+{
+	return NULL;
+}
+
 static inline struct device_node *of_graph_get_remote_port_parent(
 					const struct device_node *node)
 {