Commit 75d0de8c authored by David S. Miller's avatar David S. Miller

Merge branch 'dsa-cross-chip-FDB-support'

Vivien Didelot says:

====================
net: dsa: cross-chip FDB support

DSA can have interconnected switches. For instance, the ZII Dev Rev B
board described in arch/arm/boot/dts/vf610-zii-dev-rev-b.dts has a
switch fabric composed of 3 switch devices like this:

                          lan4                 lan6
        CPU (eth1)            |  lan5         |  lan7
                  |           | |             | |
       [0 1 2 3 4 6 5]---[6 0 1 2 3 4 5]---[9 0 1 2 3 4 5 6 7 8]
        | | |               |                     | | |
    lan0  |  lan2       lan3                  lan8  |  optical4
           lan1                                      optical3

One current issue with DSA is cross-chip FDB. If we add a static MAC
address on lan3, only its parent switch 1 (the one in the middle) will
be programmed. That is not correct in a cross-chip environment, because
the DSA ports connecting to switch 1 of adjacent switch 0 (on the left)
and switch 2 (on the right) must be programmed too.

Without this patchset, a dump of the hardware FDB of switches 0, 1 and 2
after programming a MAC address on lan3 looks like this (*):

    # bridge fdb add 11:22:33:44:55:66 dev lan3
    # cat /sys/kernel/debug/mv88e6xxx/sw*/atu/0 | grep -v FID
       0  ff:ff:ff:ff:ff:ff            MC_STATIC       n  0 1 2 3 4 5 6
       0  11:22:33:44:55:66    MC_STATIC_MGMT_PO       n  0 - - - - - -
       0  ff:ff:ff:ff:ff:ff            MC_STATIC       n  0 1 2 3 4 5 6
       0  ff:ff:ff:ff:ff:ff            MC_STATIC       n  0 1 2 3 4 5 6 7 8 9

With this patchset applied, adjacent DSA ports get programmed too:

    # bridge fdb add 11:22:33:44:55:66 dev lan3
    # cat /sys/kernel/debug/mv88e6xxx/sw*/atu/0 | grep -v FID
       0  11:22:33:44:55:66    MC_STATIC_MGMT_PO       n  - - - - - 5 -
       0  ff:ff:ff:ff:ff:ff            MC_STATIC       n  0 1 2 3 4 5 6
       0  11:22:33:44:55:66    MC_STATIC_MGMT_PO       n  0 - - - - - -
       0  ff:ff:ff:ff:ff:ff            MC_STATIC       n  0 1 2 3 4 5 6
       0  11:22:33:44:55:66    MC_STATIC_MGMT_PO       n  - - - - - - - - - 9
       0  ff:ff:ff:ff:ff:ff            MC_STATIC       n  0 1 2 3 4 5 6 7 8 9

In order to do that, the first commit introduces a dsa_towards_port()
helper which returns the local port of a switch which must be used to
reach an arbitrary switch port (local or from an adjacent switch.)

The second patch uses this helper to configure the port reaching the
target port for every switches of the fabric.

(*) a patch for squashed debugfs interface which applies on top of this
patchset is available here:

    https://github.com/vivien/linux/commit/f8e6ba34c68a72d3bf42f4dea79abacb2e61a3cc.patch
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 5420683a 3169241f
...@@ -296,20 +296,23 @@ static inline u32 dsa_user_ports(struct dsa_switch *ds) ...@@ -296,20 +296,23 @@ static inline u32 dsa_user_ports(struct dsa_switch *ds)
return mask; return mask;
} }
/* Return the local port used to reach an arbitrary switch port */
static inline unsigned int dsa_towards_port(struct dsa_switch *ds, int device,
int port)
{
if (device == ds->index)
return port;
else
return ds->rtable[device];
}
/* Return the local port used to reach the dedicated CPU port */
static inline u8 dsa_upstream_port(struct dsa_switch *ds) static inline u8 dsa_upstream_port(struct dsa_switch *ds)
{ {
struct dsa_switch_tree *dst = ds->dst; struct dsa_switch_tree *dst = ds->dst;
struct dsa_port *cpu_dp = dst->cpu_dp;
/* return dsa_towards_port(ds, cpu_dp->ds->index, cpu_dp->index);
* If this is the root switch (i.e. the switch that connects
* to the CPU), return the cpu port number on this switch.
* Else return the (DSA) port number that connects to the
* switch that is one hop closer to the cpu.
*/
if (dst->cpu_dp->ds == ds)
return dst->cpu_dp->index;
else
return ds->rtable[dst->cpu_dp->ds->index];
} }
typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid, typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid,
......
...@@ -83,29 +83,23 @@ static int dsa_switch_bridge_leave(struct dsa_switch *ds, ...@@ -83,29 +83,23 @@ static int dsa_switch_bridge_leave(struct dsa_switch *ds,
static int dsa_switch_fdb_add(struct dsa_switch *ds, static int dsa_switch_fdb_add(struct dsa_switch *ds,
struct dsa_notifier_fdb_info *info) struct dsa_notifier_fdb_info *info)
{ {
/* Do not care yet about other switch chips of the fabric */ int port = dsa_towards_port(ds, info->sw_index, info->port);
if (ds->index != info->sw_index)
return 0;
if (!ds->ops->port_fdb_add) if (!ds->ops->port_fdb_add)
return -EOPNOTSUPP; return -EOPNOTSUPP;
return ds->ops->port_fdb_add(ds, info->port, info->addr, return ds->ops->port_fdb_add(ds, port, info->addr, info->vid);
info->vid);
} }
static int dsa_switch_fdb_del(struct dsa_switch *ds, static int dsa_switch_fdb_del(struct dsa_switch *ds,
struct dsa_notifier_fdb_info *info) struct dsa_notifier_fdb_info *info)
{ {
/* Do not care yet about other switch chips of the fabric */ int port = dsa_towards_port(ds, info->sw_index, info->port);
if (ds->index != info->sw_index)
return 0;
if (!ds->ops->port_fdb_del) if (!ds->ops->port_fdb_del)
return -EOPNOTSUPP; return -EOPNOTSUPP;
return ds->ops->port_fdb_del(ds, info->port, info->addr, return ds->ops->port_fdb_del(ds, port, info->addr, info->vid);
info->vid);
} }
static int static int
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment