Skip to content

L
linux
Commit 77d0ca6b authored by David Mosberger's avatar David Mosberger Committed by David Mosberger
Browse files
Options

ia64: Patch by Christoph Hellwig: Kill two SN headers never references in 

	the current tree.
parent 87673af0
Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 269 deletions
include/asm-ia64/sn/mmtimer_private.h deleted 100644 → 0
View file @ 87673af0
/*
* Intel Multimedia Timer device interface
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (c) 2001-2003 Silicon Graphics, Inc. All rights reserved.
*
* Helper file for the SN implementation of mmtimers
*
* 11/01/01 - jbarnes - initial revision
*/
#ifndef _SN_MMTIMER_PRIVATE_H
#define RTC_BITS 55 /* 55 bits for this implementation */
#define NUM_COMPARATORS 2 /* two comparison registers in SN1 */
/*
* Check for an interrupt and clear the pending bit if
* one is waiting.
*/
#define MMTIMER_INT_PENDING(x) (x ? *(RTC_INT_PENDING_B_ADDR) : *(RTC_INT_PENDING_A_ADDR))
/*
* Set interrupts on RTC 'x' to 'v' (true or false)
*/
#define MMTIMER_SET_INT(x,v) (x ? (*(RTC_INT_ENABLED_B_ADDR) = (unsigned long)(v)) : (*(RTC_INT_ENABLED_A_ADDR) = (unsigned long)(v)))
#define MMTIMER_ENABLE_INT(x) MMTIMER_SET_INT(x, 1)
#define MMTIMER_DISABLE_INT(x) MMTIMER_SET_INT(x, 0)
typedef struct mmtimer {
spinlock_t timer_lock;
unsigned long periodic;
int signo;
volatile unsigned long *compare;
struct task_struct *process;
} mmtimer_t;
#endif /* _SN_LINUX_MMTIMER_PRIVATE_H */
include/asm-ia64/sn/uart16550.h deleted 100644 → 0
View file @ 87673af0
/*
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992-1997,2000-2003 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_IA64_SN_UART16550_H
#define _ASM_IA64_SN_UART16550_H
/*
* Definitions for 16550 chip
*/
/* defined as offsets from the data register */
#define REG_DAT 0 /* receive/transmit data */
#define REG_ICR 1 /* interrupt control register */
#define REG_ISR 2 /* interrupt status register */
#define REG_FCR 2 /* fifo control register */
#define REG_LCR 3 /* line control register */
#define REG_MCR 4 /* modem control register */
#define REG_LSR 5 /* line status register */
#define REG_MSR 6 /* modem status register */
#define REG_SCR 7 /* Scratch register */
#define REG_DLL 0 /* divisor latch (lsb) */
#define REG_DLH 1 /* divisor latch (msb) */
#define REG_EFR 2 /* 16650 enhanced feature register */
/*
* 16450/16550 Registers Structure.
*/
/* Line Control Register */
#define LCR_WLS0 0x01 /*word length select bit 0 */
#define LCR_WLS1 0x02 /*word length select bit 2 */
#define LCR_STB 0x04 /* number of stop bits */
#define LCR_PEN 0x08 /* parity enable */
#define LCR_EPS 0x10 /* even parity select */
#define LCR_SETBREAK 0x40 /* break key */
#define LCR_DLAB 0x80 /* divisor latch access bit */
#define LCR_RXLEN 0x03 /* # of data bits per received/xmitted char */
#define LCR_STOP1 0x00
#define LCR_STOP2 0x04
#define LCR_PAREN 0x08
#define LCR_PAREVN 0x10
#define LCR_PARMARK 0x20
#define LCR_SNDBRK 0x40
#define LCR_DLAB 0x80
#define LCR_BITS5 0x00 /* 5 bits per char */
#define LCR_BITS6 0x01 /* 6 bits per char */
#define LCR_BITS7 0x02 /* 7 bits per char */
#define LCR_BITS8 0x03 /* 8 bits per char */
#define LCR_MASK_BITS_CHAR 0x03
#define LCR_MASK_STOP_BITS 0x04
#define LCR_MASK_PARITY_BITS 0x18
/* Line Status Register */
#define LSR_RCA 0x01 /* data ready */
#define LSR_OVRRUN 0x02 /* overrun error */
#define LSR_PARERR 0x04 /* parity error */
#define LSR_FRMERR 0x08 /* framing error */
#define LSR_BRKDET 0x10 /* a break has arrived */
#define LSR_XHRE 0x20 /* tx hold reg is now empty */
#define LSR_XSRE 0x40 /* tx shift reg is now empty */
#define LSR_RFBE 0x80 /* rx FIFO Buffer error */
/* Interrupt Status Regisger */
#define ISR_MSTATUS 0x00
#define ISR_TxRDY 0x02
#define ISR_RxRDY 0x04
#define ISR_ERROR_INTR 0x08
#define ISR_FFTMOUT 0x0c /* FIFO Timeout */
#define ISR_RSTATUS 0x06 /* Receiver Line status */
/* Interrupt Enable Register */
#define ICR_RIEN 0x01 /* Received Data Ready */
#define ICR_TIEN 0x02 /* Tx Hold Register Empty */
#define ICR_SIEN 0x04 /* Receiver Line Status */
#define ICR_MIEN 0x08 /* Modem Status */
/* Modem Control Register */
#define MCR_DTR 0x01 /* Data Terminal Ready */
#define MCR_RTS 0x02 /* Request To Send */
#define MCR_OUT1 0x04 /* Aux output - not used */
#define MCR_OUT2 0x08 /* turns intr to 386 on/off */
#define MCR_LOOP 0x10 /* loopback for diagnostics */
#define MCR_AFE 0x20 /* Auto flow control enable */
/* Modem Status Register */
#define MSR_DCTS 0x01 /* Delta Clear To Send */
#define MSR_DDSR 0x02 /* Delta Data Set Ready */
#define MSR_DRI 0x04 /* Trail Edge Ring Indicator */
#define MSR_DDCD 0x08 /* Delta Data Carrier Detect */
#define MSR_CTS 0x10 /* Clear To Send */
#define MSR_DSR 0x20 /* Data Set Ready */
#define MSR_RI 0x40 /* Ring Indicator */
#define MSR_DCD 0x80 /* Data Carrier Detect */
#define DELTAS(x) ((x)&(MSR_DCTS|MSR_DDSR|MSR_DRI|MSR_DDCD))
#define STATES(x) ((x)(MSR_CTS|MSR_DSR|MSR_RI|MSR_DCD))
#define FCR_FIFOEN 0x01 /* enable receive/transmit fifo */
#define FCR_RxFIFO 0x02 /* enable receive fifo */
#define FCR_TxFIFO 0x04 /* enable transmit fifo */
#define FCR_MODE1 0x08 /* change to mode 1 */
#define RxLVL0 0x00 /* Rx fifo level at 1 */
#define RxLVL1 0x40 /* Rx fifo level at 4 */
#define RxLVL2 0x80 /* Rx fifo level at 8 */
#define RxLVL3 0xc0 /* Rx fifo level at 14 */
#define FIFOEN (FCR_FIFOEN | FCR_RxFIFO | FCR_TxFIFO | RxLVL3 | FCR_MODE1)
#define FCT_TxMASK 0x30 /* mask for Tx trigger */
#define FCT_RxMASK 0xc0 /* mask for Rx trigger */
/* enhanced festures register */
#define EFR_SFLOW 0x0f /* various S/w Flow Controls */
#define EFR_EIC 0x10 /* Enhanced Interrupt Control bit */
#define EFR_SCD 0x20 /* Special Character Detect */
#define EFR_RTS 0x40 /* RTS flow control */
#define EFR_CTS 0x80 /* CTS flow control */
/* Rx Tx software flow controls in 16650 enhanced mode */
#define SFLOW_Tx0 0x00 /* no Xmit flow control */
#define SFLOW_Tx1 0x08 /* Transmit Xon1, Xoff1 */
#define SFLOW_Tx2 0x04 /* Transmit Xon2, Xoff2 */
#define SFLOW_Tx3 0x0c /* Transmit Xon1,Xon2, Xoff1,Xoff2 */
#define SFLOW_Rx0 0x00 /* no Rcv flow control */
#define SFLOW_Rx1 0x02 /* Receiver compares Xon1, Xoff1 */
#define SFLOW_Rx2 0x01 /* Receiver compares Xon2, Xoff2 */
#define ASSERT_DTR(x) (x |= MCR_DTR)
#define ASSERT_RTS(x) (x |= MCR_RTS)
#define DU_RTS_ASSERTED(x) (((x) & MCR_RTS) != 0)
#define DU_RTS_ASSERT(x) ((x) |= MCR_RTS)
#define DU_RTS_DEASSERT(x) ((x) &= ~MCR_RTS)
/*
* ioctl(fd, I_STR, arg)
* use the SIOC_RS422 and SIOC_EXTCLK combination to support MIDI
*/
#define SIOC ('z' << 8) /* z for z85130 */
#define SIOC_EXTCLK (SIOC | 1) /* select/de-select external clock */
#define SIOC_RS422 (SIOC | 2) /* select/de-select RS422 protocol */
#define SIOC_ITIMER (SIOC | 3) /* upstream timer adjustment */
#define SIOC_LOOPBACK (SIOC | 4) /* diagnostic loopback test mode */
/* channel control register */
#define DMA_INT_MASK 0xe0 /* ring intr mask */
#define DMA_INT_TH25 0x20 /* 25% threshold */
#define DMA_INT_TH50 0x40 /* 50% threshold */
#define DMA_INT_TH75 0x60 /* 75% threshold */
#define DMA_INT_EMPTY 0x80 /* ring buffer empty */
#define DMA_INT_NEMPTY 0xa0 /* ring buffer not empty */
#define DMA_INT_FULL 0xc0 /* ring buffer full */
#define DMA_INT_NFULL 0xe0 /* ring buffer not full */
#define DMA_CHANNEL_RESET 0x400 /* reset dma channel */
#define DMA_ENABLE 0x200 /* enable DMA */
/* peripheral controller intr status bits applicable to serial ports */
#define ISA_SERIAL0_MASK 0x03f00000 /* mask for port #1 intrs */
#define ISA_SERIAL0_DIR 0x00100000 /* device intr request */
#define ISA_SERIAL0_Tx_THIR 0x00200000 /* Transmit DMA threshold */
#define ISA_SERIAL0_Tx_PREQ 0x00400000 /* Transmit DMA pair req */
#define ISA_SERIAL0_Tx_MEMERR 0x00800000 /* Transmit DMA memory err */
#define ISA_SERIAL0_Rx_THIR 0x01000000 /* Receive DMA threshold */
#define ISA_SERIAL0_Rx_OVERRUN 0x02000000 /* Receive DMA over-run */
#define ISA_SERIAL1_MASK 0xfc000000 /* mask for port #1 intrs */
#define ISA_SERIAL1_DIR 0x04000000 /* device intr request */
#define ISA_SERIAL1_Tx_THIR 0x08000000 /* Transmit DMA threshold */
#define ISA_SERIAL1_Tx_PREQ 0x10000000 /* Transmit DMA pair req */
#define ISA_SERIAL1_Tx_MEMERR 0x20000000 /* Transmit DMA memory err */
#define ISA_SERIAL1_Rx_THIR 0x40000000 /* Receive DMA threshold */
#define ISA_SERIAL1_Rx_OVERRUN 0x80000000 /* Receive DMA over-run */
#define MAX_RING_BLOCKS 128 /* 4096/32 */
#define MAX_RING_SIZE 4096
/* DMA Input Control Byte */
#define DMA_IC_OVRRUN 0x01 /* overrun error */
#define DMA_IC_PARERR 0x02 /* parity error */
#define DMA_IC_FRMERR 0x04 /* framing error */
#define DMA_IC_BRKDET 0x08 /* a break has arrived */
#define DMA_IC_VALID 0x80 /* pair is valid */
/* DMA Output Control Byte */
#define DMA_OC_TxINTR 0x20 /* set Tx intr after processing byte */
#define DMA_OC_INVALID 0x00 /* invalid pair */
#define DMA_OC_WTHR 0x40 /* Write byte to THR */
#define DMA_OC_WMCR 0x80 /* Write byte to MCR */
#define DMA_OC_DELAY 0xc0 /* time delay before next xmit */
/* ring id's */
#define RID_SERIAL0_TX 0x4 /* serial port 0, transmit ring buffer */
#define RID_SERIAL0_RX 0x5 /* serial port 0, receive ring buffer */
#define RID_SERIAL1_TX 0x6 /* serial port 1, transmit ring buffer */
#define RID_SERIAL1_RX 0x7 /* serial port 1, receive ring buffer */
#define CLOCK_XIN 22
#define PRESCALER_DIVISOR 3
#define CLOCK_ACE 7333333
/*
* increment the ring offset. One way to do this would be to add b'100000.
* this would let the offset value roll over automatically when it reaches
* its maximum value (127). However when we use the offset, we must use
* the appropriate bits only by masking with 0xfe0.
* The other option is to shift the offset right by 5 bits and look at its
* value. Then increment if required and shift back
* note: 127 * 2^5 = 4064
*/
#define INC_RING_POINTER(x) \
( ((x & 0xffe0) < 4064) ? (x += 32) : 0 )
#endif /* _ASM_IA64_SN_UART16550_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7