Commit 78e01a8d authored by Jitao Shi's avatar Jitao Shi Committed by CK Hu

drm/mediatek: separate mipi_tx to different file

Different IC has different mipi_tx setting of dsi.
This patch separates the mipi_tx hardware relate part for mt8173.
Signed-off-by: default avatarJitao Shi <jitao.shi@mediatek.com>
Signed-off-by: default avatarCK Hu <ck.hu@mediatek.com>
parent f9201325
......@@ -12,6 +12,7 @@ mediatek-drm-y := mtk_disp_color.o \
mtk_drm_plane.o \
mtk_dsi.o \
mtk_mipi_tx.o \
mtk_mt8173_mipi_tx.o \
mtk_dpi.o
obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
......
This diff is collapsed.
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2019 MediaTek Inc.
* Author: Jitao Shi <jitao.shi@mediatek.com>
*/
#ifndef _MTK_MIPI_TX_H
#define _MTK_MIPI_TX_H
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
struct mtk_mipitx_data {
const u32 mppll_preserve;
const struct clk_ops *mipi_tx_clk_ops;
void (*mipi_tx_enable_signal)(struct phy *phy);
void (*mipi_tx_disable_signal)(struct phy *phy);
};
struct mtk_mipi_tx {
struct device *dev;
void __iomem *regs;
u32 data_rate;
const struct mtk_mipitx_data *driver_data;
struct clk_hw pll_hw;
struct clk *pll;
};
struct mtk_mipi_tx *mtk_mipi_tx_from_clk_hw(struct clk_hw *hw);
void mtk_mipi_tx_clear_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, u32 bits);
void mtk_mipi_tx_set_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, u32 bits);
void mtk_mipi_tx_update_bits(struct mtk_mipi_tx *mipi_tx, u32 offset, u32 mask,
u32 data);
int mtk_mipi_tx_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
unsigned long mtk_mipi_tx_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate);
extern const struct mtk_mipitx_data mt2701_mipitx_data;
extern const struct mtk_mipitx_data mt8173_mipitx_data;
#endif
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 MediaTek Inc.
* Author: jitao.shi <jitao.shi@mediatek.com>
*/
#include "mtk_mipi_tx.h"
#define MIPITX_DSI_CON 0x00
#define RG_DSI_LDOCORE_EN BIT(0)
#define RG_DSI_CKG_LDOOUT_EN BIT(1)
#define RG_DSI_BCLK_SEL (3 << 2)
#define RG_DSI_LD_IDX_SEL (7 << 4)
#define RG_DSI_PHYCLK_SEL (2 << 8)
#define RG_DSI_DSICLK_FREQ_SEL BIT(10)
#define RG_DSI_LPTX_CLMP_EN BIT(11)
#define MIPITX_DSI_CLOCK_LANE 0x04
#define MIPITX_DSI_DATA_LANE0 0x08
#define MIPITX_DSI_DATA_LANE1 0x0c
#define MIPITX_DSI_DATA_LANE2 0x10
#define MIPITX_DSI_DATA_LANE3 0x14
#define RG_DSI_LNTx_LDOOUT_EN BIT(0)
#define RG_DSI_LNTx_CKLANE_EN BIT(1)
#define RG_DSI_LNTx_LPTX_IPLUS1 BIT(2)
#define RG_DSI_LNTx_LPTX_IPLUS2 BIT(3)
#define RG_DSI_LNTx_LPTX_IMINUS BIT(4)
#define RG_DSI_LNTx_LPCD_IPLUS BIT(5)
#define RG_DSI_LNTx_LPCD_IMINUS BIT(6)
#define RG_DSI_LNTx_RT_CODE (0xf << 8)
#define MIPITX_DSI_TOP_CON 0x40
#define RG_DSI_LNT_INTR_EN BIT(0)
#define RG_DSI_LNT_HS_BIAS_EN BIT(1)
#define RG_DSI_LNT_IMP_CAL_EN BIT(2)
#define RG_DSI_LNT_TESTMODE_EN BIT(3)
#define RG_DSI_LNT_IMP_CAL_CODE (0xf << 4)
#define RG_DSI_LNT_AIO_SEL (7 << 8)
#define RG_DSI_PAD_TIE_LOW_EN BIT(11)
#define RG_DSI_DEBUG_INPUT_EN BIT(12)
#define RG_DSI_PRESERVE (7 << 13)
#define MIPITX_DSI_BG_CON 0x44
#define RG_DSI_BG_CORE_EN BIT(0)
#define RG_DSI_BG_CKEN BIT(1)
#define RG_DSI_BG_DIV (0x3 << 2)
#define RG_DSI_BG_FAST_CHARGE BIT(4)
#define RG_DSI_VOUT_MSK (0x3ffff << 5)
#define RG_DSI_V12_SEL (7 << 5)
#define RG_DSI_V10_SEL (7 << 8)
#define RG_DSI_V072_SEL (7 << 11)
#define RG_DSI_V04_SEL (7 << 14)
#define RG_DSI_V032_SEL (7 << 17)
#define RG_DSI_V02_SEL (7 << 20)
#define RG_DSI_BG_R1_TRIM (0xf << 24)
#define RG_DSI_BG_R2_TRIM (0xf << 28)
#define MIPITX_DSI_PLL_CON0 0x50
#define RG_DSI_MPPLL_PLL_EN BIT(0)
#define RG_DSI_MPPLL_DIV_MSK (0x1ff << 1)
#define RG_DSI_MPPLL_PREDIV (3 << 1)
#define RG_DSI_MPPLL_TXDIV0 (3 << 3)
#define RG_DSI_MPPLL_TXDIV1 (3 << 5)
#define RG_DSI_MPPLL_POSDIV (7 << 7)
#define RG_DSI_MPPLL_MONVC_EN BIT(10)
#define RG_DSI_MPPLL_MONREF_EN BIT(11)
#define RG_DSI_MPPLL_VOD_EN BIT(12)
#define MIPITX_DSI_PLL_CON1 0x54
#define RG_DSI_MPPLL_SDM_FRA_EN BIT(0)
#define RG_DSI_MPPLL_SDM_SSC_PH_INIT BIT(1)
#define RG_DSI_MPPLL_SDM_SSC_EN BIT(2)
#define RG_DSI_MPPLL_SDM_SSC_PRD (0xffff << 16)
#define MIPITX_DSI_PLL_CON2 0x58
#define MIPITX_DSI_PLL_TOP 0x64
#define RG_DSI_MPPLL_PRESERVE (0xff << 8)
#define MIPITX_DSI_PLL_PWR 0x68
#define RG_DSI_MPPLL_SDM_PWR_ON BIT(0)
#define RG_DSI_MPPLL_SDM_ISO_EN BIT(1)
#define RG_DSI_MPPLL_SDM_PWR_ACK BIT(8)
#define MIPITX_DSI_SW_CTRL 0x80
#define SW_CTRL_EN BIT(0)
#define MIPITX_DSI_SW_CTRL_CON0 0x84
#define SW_LNTC_LPTX_PRE_OE BIT(0)
#define SW_LNTC_LPTX_OE BIT(1)
#define SW_LNTC_LPTX_P BIT(2)
#define SW_LNTC_LPTX_N BIT(3)
#define SW_LNTC_HSTX_PRE_OE BIT(4)
#define SW_LNTC_HSTX_OE BIT(5)
#define SW_LNTC_HSTX_ZEROCLK BIT(6)
#define SW_LNT0_LPTX_PRE_OE BIT(7)
#define SW_LNT0_LPTX_OE BIT(8)
#define SW_LNT0_LPTX_P BIT(9)
#define SW_LNT0_LPTX_N BIT(10)
#define SW_LNT0_HSTX_PRE_OE BIT(11)
#define SW_LNT0_HSTX_OE BIT(12)
#define SW_LNT0_LPRX_EN BIT(13)
#define SW_LNT1_LPTX_PRE_OE BIT(14)
#define SW_LNT1_LPTX_OE BIT(15)
#define SW_LNT1_LPTX_P BIT(16)
#define SW_LNT1_LPTX_N BIT(17)
#define SW_LNT1_HSTX_PRE_OE BIT(18)
#define SW_LNT1_HSTX_OE BIT(19)
#define SW_LNT2_LPTX_PRE_OE BIT(20)
#define SW_LNT2_LPTX_OE BIT(21)
#define SW_LNT2_LPTX_P BIT(22)
#define SW_LNT2_LPTX_N BIT(23)
#define SW_LNT2_HSTX_PRE_OE BIT(24)
#define SW_LNT2_HSTX_OE BIT(25)
static int mtk_mipi_tx_pll_prepare(struct clk_hw *hw)
{
struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
u8 txdiv, txdiv0, txdiv1;
u64 pcw;
dev_dbg(mipi_tx->dev, "prepare: %u Hz\n", mipi_tx->data_rate);
if (mipi_tx->data_rate >= 500000000) {
txdiv = 1;
txdiv0 = 0;
txdiv1 = 0;
} else if (mipi_tx->data_rate >= 250000000) {
txdiv = 2;
txdiv0 = 1;
txdiv1 = 0;
} else if (mipi_tx->data_rate >= 125000000) {
txdiv = 4;
txdiv0 = 2;
txdiv1 = 0;
} else if (mipi_tx->data_rate > 62000000) {
txdiv = 8;
txdiv0 = 2;
txdiv1 = 1;
} else if (mipi_tx->data_rate >= 50000000) {
txdiv = 16;
txdiv0 = 2;
txdiv1 = 2;
} else {
return -EINVAL;
}
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_BG_CON,
RG_DSI_VOUT_MSK |
RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN,
(4 << 20) | (4 << 17) | (4 << 14) |
(4 << 11) | (4 << 8) | (4 << 5) |
RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN);
usleep_range(30, 100);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_TOP_CON,
RG_DSI_LNT_IMP_CAL_CODE | RG_DSI_LNT_HS_BIAS_EN,
(8 << 4) | RG_DSI_LNT_HS_BIAS_EN);
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_CON,
RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR,
RG_DSI_MPPLL_SDM_PWR_ON |
RG_DSI_MPPLL_SDM_ISO_EN,
RG_DSI_MPPLL_SDM_PWR_ON);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
RG_DSI_MPPLL_PLL_EN);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
RG_DSI_MPPLL_TXDIV0 | RG_DSI_MPPLL_TXDIV1 |
RG_DSI_MPPLL_PREDIV,
(txdiv0 << 3) | (txdiv1 << 5));
/*
* PLL PCW config
* PCW bit 24~30 = integer part of pcw
* PCW bit 0~23 = fractional part of pcw
* pcw = data_Rate*4*txdiv/(Ref_clk*2);
* Post DIV =4, so need data_Rate*4
* Ref_clk is 26MHz
*/
pcw = div_u64(((u64)mipi_tx->data_rate * 2 * txdiv) << 24,
26000000);
writel(pcw, mipi_tx->regs + MIPITX_DSI_PLL_CON2);
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON1,
RG_DSI_MPPLL_SDM_FRA_EN);
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_PLL_CON0, RG_DSI_MPPLL_PLL_EN);
usleep_range(20, 100);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON1,
RG_DSI_MPPLL_SDM_SSC_EN);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP,
RG_DSI_MPPLL_PRESERVE,
mipi_tx->driver_data->mppll_preserve);
return 0;
}
static void mtk_mipi_tx_pll_unprepare(struct clk_hw *hw)
{
struct mtk_mipi_tx *mipi_tx = mtk_mipi_tx_from_clk_hw(hw);
dev_dbg(mipi_tx->dev, "unprepare\n");
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
RG_DSI_MPPLL_PLL_EN);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_TOP,
RG_DSI_MPPLL_PRESERVE, 0);
mtk_mipi_tx_update_bits(mipi_tx, MIPITX_DSI_PLL_PWR,
RG_DSI_MPPLL_SDM_ISO_EN |
RG_DSI_MPPLL_SDM_PWR_ON,
RG_DSI_MPPLL_SDM_ISO_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_TOP_CON,
RG_DSI_LNT_HS_BIAS_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_CON,
RG_DSI_CKG_LDOOUT_EN | RG_DSI_LDOCORE_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_BG_CON,
RG_DSI_BG_CKEN | RG_DSI_BG_CORE_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_PLL_CON0,
RG_DSI_MPPLL_DIV_MSK);
}
static long mtk_mipi_tx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
return clamp_val(rate, 50000000, 1250000000);
}
static const struct clk_ops mtk_mipi_tx_pll_ops = {
.prepare = mtk_mipi_tx_pll_prepare,
.unprepare = mtk_mipi_tx_pll_unprepare,
.round_rate = mtk_mipi_tx_pll_round_rate,
.set_rate = mtk_mipi_tx_pll_set_rate,
.recalc_rate = mtk_mipi_tx_pll_recalc_rate,
};
static void mtk_mipi_tx_power_on_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
u32 reg;
for (reg = MIPITX_DSI_CLOCK_LANE;
reg <= MIPITX_DSI_DATA_LANE3; reg += 4)
mtk_mipi_tx_set_bits(mipi_tx, reg, RG_DSI_LNTx_LDOOUT_EN);
mtk_mipi_tx_clear_bits(mipi_tx, MIPITX_DSI_TOP_CON,
RG_DSI_PAD_TIE_LOW_EN);
}
static void mtk_mipi_tx_power_off_signal(struct phy *phy)
{
struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
u32 reg;
mtk_mipi_tx_set_bits(mipi_tx, MIPITX_DSI_TOP_CON,
RG_DSI_PAD_TIE_LOW_EN);
for (reg = MIPITX_DSI_CLOCK_LANE;
reg <= MIPITX_DSI_DATA_LANE3; reg += 4)
mtk_mipi_tx_clear_bits(mipi_tx, reg, RG_DSI_LNTx_LDOOUT_EN);
}
const struct mtk_mipitx_data mt2701_mipitx_data = {
.mppll_preserve = (3 << 8),
.mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops,
.mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal,
.mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal,
};
const struct mtk_mipitx_data mt8173_mipitx_data = {
.mppll_preserve = (0 << 8),
.mipi_tx_clk_ops = &mtk_mipi_tx_pll_ops,
.mipi_tx_enable_signal = mtk_mipi_tx_power_on_signal,
.mipi_tx_disable_signal = mtk_mipi_tx_power_off_signal,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment