Merge tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

Pull EDAC updates from Borislav Petkov:
 "Following up on last week's discussion, here's my part of the EDAC
  pile, highlights in the signed tag.

  The last two patches have a date from just now because I've just
  applied them to the tree after Johannes sent them to me earlier.  I
  decided to forward them now because they're trivial.

  There's a third one for MPC85xx which adds PCIe error interrupt
  support but since it is not so trivial and hasn't seen any linux-next
  time, I'm deferring it to 3.14

  EDAC update highlights:
   - Support for Calxeda ECX-2000 memory controller, from Robert Richter
   - Misc Calxeda Highbank drivers and EDAC core cleanups, from Rob
     Herring and Robert Richter
   - New maintainer for Freescale's MPC85xx EDAC driver: Johannes
     Thumshirn"

* tag 'edac_for_3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  edac/85xx: Remove mpc85xx_pci_err_remove
  EDAC: Add edac-mpc85xx driver to MAINTAINERS
  edac, highbank: Moving error injection to sysfs for edac
  edac, highbank: Add MAINTAINERS entry
  edac: Unify reporting of device info for device, mc and pci
  edac, highbank: Improve and unify naming
  edac, highbank: Add Calxeda ECX-2000 support
  ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
  edac, highbank: Fix interrupt setup of mem and l2 controller

Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt

 Calxeda DDR memory controller
 
 Properties:
-- compatible : Should be "calxeda,hb-ddr-ctrl"
+- compatible : Should be:
+  - "calxeda,hb-ddr-ctrl" for ECX-1000
+  - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
 - reg : Address and size for DDR controller registers.
 - interrupts : Interrupt for DDR controller.
 

MAINTAINERS

@@ -3063,6 +3063,14 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/amd64_edac*
 
+EDAC-CALXEDA
+M:	Doug Thompson <dougthompson@xmission.com>
+M:	Robert Richter <rric@kernel.org>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/highbank*
+
 EDAC-CAVIUM
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	David Daney <david.daney@cavium.com>
@@ -3144,6 +3152,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
+EDAC-MPC85XX
+M:	Johannes Thumshirn <johannes.thumshirn@men.de>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/mpc85xx_edac.[ch]
+
 EDAC-PASEMI
 M:	Egor Martovetsky <egor@pasemi.com>
 L:	linux-edac@vger.kernel.org

arch/arm/boot/dts/ecx-2000.dts

@@ -85,6 +85,12 @@ timer {
 				<1 10 0xf08>;
 		};
 
+		memory-controller@fff00000 {
+			compatible = "calxeda,ecx-2000-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;

arch/arm/boot/dts/ecx-common.dtsi

@@ -53,12 +53,6 @@ sdhci@ffe0e000 {
 			status = "disabled";
 		};
 
-		memory-controller@fff00000 {
-			compatible = "calxeda,hb-ddr-ctrl";
-			reg = <0xfff00000 0x1000>;
-			interrupts = <0 91 4>;
-		};
-
 		ipc@fff20000 {
 			compatible = "arm,pl320", "arm,primecell";
 			reg = <0xfff20000 0x1000>;

arch/arm/boot/dts/highbank.dts

@@ -86,6 +86,12 @@ memory {
 	soc {
 		ranges = <0x00000000 0x00000000 0xffffffff>;
 
+		memory-controller@fff00000 {
+			compatible = "calxeda,hb-ddr-ctrl";
+			reg = <0xfff00000 0x1000>;
+			interrupts = <0 91 4>;
+		};
+
 		timer@fff10600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xfff10600 0x20>;

drivers/edac/edac_device.c

@@ -530,11 +530,8 @@ int edac_device_add_device(struct edac_device_ctl_info *edac_dev)
 
 	/* Report action taken */
 	edac_device_printk(edac_dev, KERN_INFO,
-				"Giving out device to module '%s' controller "
-				"'%s': DEV '%s' (%s)\n",
-				edac_dev->mod_name,
-				edac_dev->ctl_name,
-				edac_dev_name(edac_dev),
+		"Giving out device to module %s controller %s: DEV %s (%s)\n",
+		edac_dev->mod_name, edac_dev->ctl_name, edac_dev->dev_name,
 		edac_op_state_to_string(edac_dev->op_state));
 
 	mutex_unlock(&device_ctls_mutex);

drivers/edac/edac_mc.c

@@ -788,8 +788,10 @@ int edac_mc_add_mc(struct mem_ctl_info *mci)
 	}
 
 	/* Report action taken */
-	edac_mc_printk(mci, KERN_INFO, "Giving out device to '%s' '%s':"
-		" DEV %s\n", mci->mod_name, mci->ctl_name, edac_dev_name(mci));
+	edac_mc_printk(mci, KERN_INFO,
+		"Giving out device to module %s controller %s: DEV %s (%s)\n",
+		mci->mod_name, mci->ctl_name, mci->dev_name,
+		edac_op_state_to_string(mci->op_state));
 
 	edac_mc_owner = mci->mod_name;
 

drivers/edac/edac_pci.c

@@ -358,11 +358,9 @@ int edac_pci_add_device(struct edac_pci_ctl_info *pci, int edac_idx)
 	}
 
 	edac_pci_printk(pci, KERN_INFO,
-			"Giving out device to module '%s' controller '%s':"
-			" DEV '%s' (%s)\n",
-			pci->mod_name,
-			pci->ctl_name,
-			edac_dev_name(pci), edac_op_state_to_string(pci->op_state));
+		"Giving out device to module %s controller %s: DEV %s (%s)\n",
+		pci->mod_name, pci->ctl_name, pci->dev_name,
+		edac_op_state_to_string(pci->op_state));
 
 	mutex_unlock(&edac_pci_ctls_mutex);
 	return 0;

drivers/edac/highbank_l2_edac.c

@@ -50,8 +50,15 @@ static irqreturn_t highbank_l2_err_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static const struct of_device_id hb_l2_err_of_match[] = {
+	{ .compatible = "calxeda,hb-sregs-l2-ecc", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hb_l2_err_of_match);
+
 static int highbank_l2_err_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *id;
 	struct edac_device_ctl_info *dci;
 	struct hb_l2_drvdata *drvdata;
 	struct resource *r;
@@ -90,28 +97,32 @@ static int highbank_l2_err_probe(struct platform_device *pdev)
 		goto err;
 	}
 
+	id = of_match_device(hb_l2_err_of_match, &pdev->dev);
+	dci->mod_name = pdev->dev.driver->name;
+	dci->ctl_name = id ? id->compatible : "unknown";
+	dci->dev_name = dev_name(&pdev->dev);
+
+	if (edac_device_add_device(dci))
+		goto err;
+
 	drvdata->db_irq = platform_get_irq(pdev, 0);
 	res = devm_request_irq(&pdev->dev, drvdata->db_irq,
 			       highbank_l2_err_handler,
 			       0, dev_name(&pdev->dev), dci);
 	if (res < 0)
-		goto err;
+		goto err2;
 
 	drvdata->sb_irq = platform_get_irq(pdev, 1);
 	res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
 			       highbank_l2_err_handler,
 			       0, dev_name(&pdev->dev), dci);
 	if (res < 0)
-		goto err;
-
-	dci->mod_name = dev_name(&pdev->dev);
-	dci->dev_name = dev_name(&pdev->dev);
-
-	if (edac_device_add_device(dci))
-		goto err;
+		goto err2;
 
 	devres_close_group(&pdev->dev, NULL);
 	return 0;
+err2:
+	edac_device_del_device(&pdev->dev);
 err:
 	devres_release_group(&pdev->dev, NULL);
 	edac_device_free_ctl_info(dci);
@@ -127,12 +138,6 @@ static int highbank_l2_err_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id hb_l2_err_of_match[] = {
-	{ .compatible = "calxeda,hb-sregs-l2-ecc", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, hb_l2_err_of_match);
-
 static struct platform_driver highbank_l2_edac_driver = {
 	.probe = highbank_l2_err_probe,
 	.remove = highbank_l2_err_remove,

drivers/edac/highbank_mc_edac.c

@@ -26,31 +26,40 @@
 #include "edac_module.h"
 
 /* DDR Ctrlr Error Registers */
-#define HB_DDR_ECC_OPT			0x128
-#define HB_DDR_ECC_U_ERR_ADDR		0x130
-#define HB_DDR_ECC_U_ERR_STAT		0x134
-#define HB_DDR_ECC_U_ERR_DATAL		0x138
-#define HB_DDR_ECC_U_ERR_DATAH		0x13c
-#define HB_DDR_ECC_C_ERR_ADDR		0x140
-#define HB_DDR_ECC_C_ERR_STAT		0x144
-#define HB_DDR_ECC_C_ERR_DATAL		0x148
-#define HB_DDR_ECC_C_ERR_DATAH		0x14c
-#define HB_DDR_ECC_INT_STATUS		0x180
-#define HB_DDR_ECC_INT_ACK		0x184
-#define HB_DDR_ECC_U_ERR_ID		0x424
-#define HB_DDR_ECC_C_ERR_ID		0x428
 
-#define HB_DDR_ECC_INT_STAT_CE		0x8
-#define HB_DDR_ECC_INT_STAT_DOUBLE_CE	0x10
-#define HB_DDR_ECC_INT_STAT_UE		0x20
-#define HB_DDR_ECC_INT_STAT_DOUBLE_UE	0x40
+#define HB_DDR_ECC_ERR_BASE		0x128
+#define MW_DDR_ECC_ERR_BASE		0x1b4
+
+#define HB_DDR_ECC_OPT			0x00
+#define HB_DDR_ECC_U_ERR_ADDR		0x08
+#define HB_DDR_ECC_U_ERR_STAT		0x0c
+#define HB_DDR_ECC_U_ERR_DATAL		0x10
+#define HB_DDR_ECC_U_ERR_DATAH		0x14
+#define HB_DDR_ECC_C_ERR_ADDR		0x18
+#define HB_DDR_ECC_C_ERR_STAT		0x1c
+#define HB_DDR_ECC_C_ERR_DATAL		0x20
+#define HB_DDR_ECC_C_ERR_DATAH		0x24
 
 #define HB_DDR_ECC_OPT_MODE_MASK	0x3
 #define HB_DDR_ECC_OPT_FWC		0x100
 #define HB_DDR_ECC_OPT_XOR_SHIFT	16
 
+/* DDR Ctrlr Interrupt Registers */
+
+#define HB_DDR_ECC_INT_BASE		0x180
+#define MW_DDR_ECC_INT_BASE		0x218
+
+#define HB_DDR_ECC_INT_STATUS		0x00
+#define HB_DDR_ECC_INT_ACK		0x04
+
+#define HB_DDR_ECC_INT_STAT_CE		0x8
+#define HB_DDR_ECC_INT_STAT_DOUBLE_CE	0x10
+#define HB_DDR_ECC_INT_STAT_UE		0x20
+#define HB_DDR_ECC_INT_STAT_DOUBLE_UE	0x40
+
 struct hb_mc_drvdata {
-	void __iomem *mc_vbase;
+	void __iomem *mc_err_base;
+	void __iomem *mc_int_base;
 };
 
 static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
@@ -60,10 +69,10 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
 	u32 status, err_addr;
 
 	/* Read the interrupt status register */
-	status = readl(drvdata->mc_vbase + HB_DDR_ECC_INT_STATUS);
+	status = readl(drvdata->mc_int_base + HB_DDR_ECC_INT_STATUS);
 
 	if (status & HB_DDR_ECC_INT_STAT_UE) {
-		err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_U_ERR_ADDR);
+		err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_U_ERR_ADDR);
 		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
 				     err_addr >> PAGE_SHIFT,
 				     err_addr & ~PAGE_MASK, 0,
@@ -71,9 +80,9 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
 				     mci->ctl_name, "");
 	}
 	if (status & HB_DDR_ECC_INT_STAT_CE) {
-		u32 syndrome = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_STAT);
+		u32 syndrome = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_STAT);
 		syndrome = (syndrome >> 8) & 0xff;
-		err_addr = readl(drvdata->mc_vbase + HB_DDR_ECC_C_ERR_ADDR);
+		err_addr = readl(drvdata->mc_err_base + HB_DDR_ECC_C_ERR_ADDR);
 		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
 				     err_addr >> PAGE_SHIFT,
 				     err_addr & ~PAGE_MASK, syndrome,
@@ -82,66 +91,79 @@ static irqreturn_t highbank_mc_err_handler(int irq, void *dev_id)
 	}
 
 	/* clear the error, clears the interrupt */
-	writel(status, drvdata->mc_vbase + HB_DDR_ECC_INT_ACK);
+	writel(status, drvdata->mc_int_base + HB_DDR_ECC_INT_ACK);
 	return IRQ_HANDLED;
 }
 
-#ifdef CONFIG_EDAC_DEBUG
-static ssize_t highbank_mc_err_inject_write(struct file *file,
-				      const char __user *data,
-				      size_t count, loff_t *ppos)
+static void highbank_mc_err_inject(struct mem_ctl_info *mci, u8 synd)
 {
-	struct mem_ctl_info *mci = file->private_data;
 	struct hb_mc_drvdata *pdata = mci->pvt_info;
-	char buf[32];
-	size_t buf_size;
 	u32 reg;
-	u8 synd;
 
-	buf_size = min(count, (sizeof(buf)-1));
-	if (copy_from_user(buf, data, buf_size))
-		return -EFAULT;
-	buf[buf_size] = 0;
-
-	if (!kstrtou8(buf, 16, &synd)) {
-		reg = readl(pdata->mc_vbase + HB_DDR_ECC_OPT);
+	reg = readl(pdata->mc_err_base + HB_DDR_ECC_OPT);
 	reg &= HB_DDR_ECC_OPT_MODE_MASK;
 	reg |= (synd << HB_DDR_ECC_OPT_XOR_SHIFT) | HB_DDR_ECC_OPT_FWC;
-		writel(reg, pdata->mc_vbase + HB_DDR_ECC_OPT);
-	}
+	writel(reg, pdata->mc_err_base + HB_DDR_ECC_OPT);
+}
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+
+static ssize_t highbank_mc_inject_ctrl(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct mem_ctl_info *mci = to_mci(dev);
+	u8 synd;
+
+	if (kstrtou8(buf, 16, &synd))
+		return -EINVAL;
+
+	highbank_mc_err_inject(mci, synd);
 
 	return count;
 }
 
-static const struct file_operations highbank_mc_debug_inject_fops = {
-	.open = simple_open,
-	.write = highbank_mc_err_inject_write,
-	.llseek = generic_file_llseek,
+static DEVICE_ATTR(inject_ctrl, S_IWUSR, NULL, highbank_mc_inject_ctrl);
+
+struct hb_mc_settings {
+	int	err_offset;
+	int	int_offset;
 };
 
-static void highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
-{
-	if (mci->debugfs)
-		debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
-				    &highbank_mc_debug_inject_fops);
-;
-}
-#else
-static void highbank_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
-{}
-#endif
+static struct hb_mc_settings hb_settings = {
+	.err_offset = HB_DDR_ECC_ERR_BASE,
+	.int_offset = HB_DDR_ECC_INT_BASE,
+};
+
+static struct hb_mc_settings mw_settings = {
+	.err_offset = MW_DDR_ECC_ERR_BASE,
+	.int_offset = MW_DDR_ECC_INT_BASE,
+};
+
+static struct of_device_id hb_ddr_ctrl_of_match[] = {
+	{ .compatible = "calxeda,hb-ddr-ctrl",		.data = &hb_settings },
+	{ .compatible = "calxeda,ecx-2000-ddr-ctrl",	.data = &mw_settings },
+	{},
+};
+MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
 
 static int highbank_mc_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *id;
+	const struct hb_mc_settings *settings;
 	struct edac_mc_layer layers[2];
 	struct mem_ctl_info *mci;
 	struct hb_mc_drvdata *drvdata;
 	struct dimm_info *dimm;
 	struct resource *r;
+	void __iomem *base;
 	u32 control;
 	int irq;
 	int res = 0;
 
+	id = of_match_device(hb_ddr_ctrl_of_match, &pdev->dev);
+	if (!id)
+		return -ENODEV;
+
 	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
 	layers[0].size = 1;
 	layers[0].is_virt_csrow = true;
@@ -174,35 +196,31 @@ static int highbank_mc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	drvdata->mc_vbase = devm_ioremap(&pdev->dev,
-					  r->start, resource_size(r));
-	if (!drvdata->mc_vbase) {
+	base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+	if (!base) {
 		dev_err(&pdev->dev, "Unable to map regs\n");
 		res = -ENOMEM;
 		goto err;
 	}
 
-	control = readl(drvdata->mc_vbase + HB_DDR_ECC_OPT) & 0x3;
+	settings = id->data;
+	drvdata->mc_err_base = base + settings->err_offset;
+	drvdata->mc_int_base = base + settings->int_offset;
+
+	control = readl(drvdata->mc_err_base + HB_DDR_ECC_OPT) & 0x3;
 	if (!control || (control == 0x2)) {
 		dev_err(&pdev->dev, "No ECC present, or ECC disabled\n");
 		res = -ENODEV;
 		goto err;
 	}
 
-	irq = platform_get_irq(pdev, 0);
-	res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
-			       0, dev_name(&pdev->dev), mci);
-	if (res < 0) {
-		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
-		goto err;
-	}
-
 	mci->mtype_cap = MEM_FLAG_DDR3;
 	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
 	mci->edac_cap = EDAC_FLAG_SECDED;
-	mci->mod_name = dev_name(&pdev->dev);
+	mci->mod_name = pdev->dev.driver->name;
 	mci->mod_ver = "1";
-	mci->ctl_name = dev_name(&pdev->dev);
+	mci->ctl_name = id->compatible;
+	mci->dev_name = dev_name(&pdev->dev);
 	mci->scrub_mode = SCRUB_SW_SRC;
 
 	/* Only a single 4GB DIMM is supported */
@@ -217,10 +235,20 @@ static int highbank_mc_probe(struct platform_device *pdev)
 	if (res < 0)
 		goto err;
 
-	highbank_mc_create_debugfs_nodes(mci);
+	irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, irq, highbank_mc_err_handler,
+			       0, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+		goto err2;
+	}
+
+	device_create_file(&mci->dev, &dev_attr_inject_ctrl);
 
 	devres_close_group(&pdev->dev, NULL);
 	return 0;
+err2:
+	edac_mc_del_mc(&pdev->dev);
 err:
 	devres_release_group(&pdev->dev, NULL);
 	edac_mc_free(mci);
@@ -231,17 +259,12 @@ static int highbank_mc_remove(struct platform_device *pdev)
 {
 	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
 
+	device_remove_file(&mci->dev, &dev_attr_inject_ctrl);
 	edac_mc_del_mc(&pdev->dev);
 	edac_mc_free(mci);
 	return 0;
 }
 
-static const struct of_device_id hb_ddr_ctrl_of_match[] = {
-	{ .compatible = "calxeda,hb-ddr-ctrl", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, hb_ddr_ctrl_of_match);
-
 static struct platform_driver highbank_mc_edac_driver = {
 	.probe = highbank_mc_probe,
 	.remove = highbank_mc_remove,

drivers/edac/mpc85xx_edac.c

@@ -327,28 +327,6 @@ int mpc85xx_pci_err_probe(struct platform_device *op)
 }
 EXPORT_SYMBOL(mpc85xx_pci_err_probe);
 
-static int mpc85xx_pci_err_remove(struct platform_device *op)
-{
-	struct edac_pci_ctl_info *pci = dev_get_drvdata(&op->dev);
-	struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
-
-	edac_dbg(0, "\n");
-
-	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR,
-		 orig_pci_err_cap_dr);
-
-	out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, orig_pci_err_en);
-
-	edac_pci_del_device(pci->dev);
-
-	if (edac_op_state == EDAC_OPSTATE_INT)
-		irq_dispose_mapping(pdata->irq);
-
-	edac_pci_free_ctl_info(pci);
-
-	return 0;
-}
-
 #endif				/* CONFIG_PCI */
 
 /**************************** L2 Err device ***************************/