Commit 7bd49fe1 authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Jonathan Cameron

staging:iio:ad7291: Use i2c_smbus_{read,write}_word_swapped instead of open-coding it

No need to swap the upper and lower byte by hand if there is a helper function
which already does this.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent 3f8db0d4
......@@ -87,20 +87,20 @@ static int ad7291_i2c_read(struct ad7291_chip_info *chip, u8 reg, u16 *data)
struct i2c_client *client = chip->client;
int ret = 0;
ret = i2c_smbus_read_word_data(client, reg);
ret = i2c_smbus_read_word_swapped(client, reg);
if (ret < 0) {
dev_err(&client->dev, "I2C read error\n");
return ret;
}
*data = swab16((u16)ret);
*data = ret;
return 0;
}
static int ad7291_i2c_write(struct ad7291_chip_info *chip, u8 reg, u16 data)
{
return i2c_smbus_write_word_data(chip->client, reg, swab16(data));
return i2c_smbus_write_word_swapped(chip->client, reg, data);
}
static irqreturn_t ad7291_event_handler(int irq, void *private)
......@@ -418,35 +418,33 @@ static int ad7291_read_raw(struct iio_dev *indio_dev,
return ret;
}
/* Read voltage */
ret = i2c_smbus_read_word_data(chip->client,
ret = i2c_smbus_read_word_swapped(chip->client,
AD7291_VOLTAGE);
if (ret < 0) {
mutex_unlock(&chip->state_lock);
return ret;
}
*val = swab16((u16)ret) & AD7291_VALUE_MASK;
*val = ret & AD7291_VALUE_MASK;
mutex_unlock(&chip->state_lock);
return IIO_VAL_INT;
case IIO_TEMP:
/* Assumes tsense bit of command register always set */
ret = i2c_smbus_read_word_data(chip->client,
ret = i2c_smbus_read_word_swapped(chip->client,
AD7291_T_SENSE);
if (ret < 0)
return ret;
signval = (s16)((swab16((u16)ret) &
AD7291_VALUE_MASK) << 4) >> 4;
signval = (s16)((ret & AD7291_VALUE_MASK) << 4) >> 4;
*val = signval;
return IIO_VAL_INT;
default:
return -EINVAL;
}
case IIO_CHAN_INFO_AVERAGE_RAW:
ret = i2c_smbus_read_word_data(chip->client,
ret = i2c_smbus_read_word_swapped(chip->client,
AD7291_T_AVERAGE);
if (ret < 0)
return ret;
signval = (s16)((swab16((u16)ret) &
AD7291_VALUE_MASK) << 4) >> 4;
signval = (s16)((ret & AD7291_VALUE_MASK) << 4) >> 4;
*val = signval;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment