Commit 7c00ffa3 authored by Mark Haverkamp's avatar Mark Haverkamp Committed by James Bottomley

[SCSI] 2.6 aacraid: Variable FIB size (updated patch)

New code from the Adaptec driver.  Performance enhancement for newer
adapters.  I hope that this isn't too big for a single patch.  I believe
that other than the few small cleanups mentioned, that the changes are
all related.

- Added Variable FIB size negotiation for new adapters.
- Added support to maximize scatter gather tables and thus permit
  requests larger than 64KB/each.
- Limit Scatter Gather to 34 elements for ROMB platforms.
- aac_printf is only enabled with AAC_QUIRK_34SG
- Large FIB ioctl support
- some minor cleanup

Passes sparse check.
I have tested it on x86 and ppc64 machines.
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 672b2d38
......@@ -53,10 +53,6 @@
#define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
#define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
#define MAX_FIB_DATA (sizeof(struct hw_fib) - sizeof(FIB_HEADER))
#define MAX_DRIVER_SG_SEGMENT_COUNT 17
/*
* Sense codes
*/
......@@ -158,6 +154,13 @@ MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0
module_param(commit, int, 0);
MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on");
int numacb = -1;
module_param(numacb, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid\nvalues are 512 and down. Default is to use suggestion from Firmware.");
int acbsize = -1;
module_param(acbsize, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512,\n2048, 4096 and 8192. Default is to use suggestion from Firmware.");
/**
* aac_get_config_status - check the adapter configuration
* @common: adapter to query
......@@ -462,7 +465,7 @@ static int probe_container(struct aac_dev *dev, int cid)
1, 1,
NULL, NULL);
if (status < 0) {
printk(KERN_WARNING "aacraid: probe_containers query failed.\n");
printk(KERN_WARNING "aacraid: probe_container query failed.\n");
goto error;
}
......@@ -605,35 +608,63 @@ static void set_sense(u8 *sense_buf, u8 sense_key, u8 sense_code,
int aac_get_adapter_info(struct aac_dev* dev)
{
struct fib* fibptr;
struct aac_adapter_info* info;
int rcode;
u32 tmp;
struct aac_adapter_info * info;
if (!(fibptr = fib_alloc(dev)))
return -ENOMEM;
fib_init(fibptr);
info = (struct aac_adapter_info*) fib_data(fibptr);
memset(info,0,sizeof(struct aac_adapter_info));
info = (struct aac_adapter_info *) fib_data(fibptr);
memset(info,0,sizeof(*info));
rcode = fib_send(RequestAdapterInfo,
fibptr,
sizeof(struct aac_adapter_info),
sizeof(*info),
FsaNormal,
1, 1,
NULL,
NULL);
if (rcode < 0) {
fib_complete(fibptr);
fib_free(fibptr);
return rcode;
}
memcpy(&dev->adapter_info, info, sizeof(*info));
if (dev->adapter_info.options & AAC_OPT_SUPPLEMENT_ADAPTER_INFO) {
struct aac_supplement_adapter_info * info;
fib_init(fibptr);
info = (struct aac_supplement_adapter_info *) fib_data(fibptr);
memset(info,0,sizeof(*info));
rcode = fib_send(RequestSupplementAdapterInfo,
fibptr,
sizeof(*info),
FsaNormal,
1, 1,
NULL,
NULL);
memcpy(&dev->adapter_info, info, sizeof(struct aac_adapter_info));
if (rcode >= 0)
memcpy(&dev->supplement_adapter_info, info, sizeof(*info));
}
tmp = le32_to_cpu(dev->adapter_info.kernelrev);
printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d]\n",
printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
dev->name,
dev->id,
tmp>>24,
(tmp>>16)&0xff,
tmp&0xff,
le32_to_cpu(dev->adapter_info.kernelbuild));
le32_to_cpu(dev->adapter_info.kernelbuild),
(int)sizeof(dev->supplement_adapter_info.BuildDate),
dev->supplement_adapter_info.BuildDate);
tmp = le32_to_cpu(dev->adapter_info.monitorrev);
printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
dev->name, dev->id,
......@@ -707,6 +738,38 @@ int aac_get_adapter_info(struct aac_dev* dev)
rcode = -ENOMEM;
}
}
/*
* 57 scatter gather elements
*/
dev->scsi_host_ptr->sg_tablesize = (dev->max_fib_size -
sizeof(struct aac_fibhdr) -
sizeof(struct aac_write) + sizeof(struct sgmap)) /
sizeof(struct sgmap);
if (dev->dac_support) {
/*
* 38 scatter gather elements
*/
dev->scsi_host_ptr->sg_tablesize =
(dev->max_fib_size -
sizeof(struct aac_fibhdr) -
sizeof(struct aac_write64) +
sizeof(struct sgmap64)) /
sizeof(struct sgmap64);
}
dev->scsi_host_ptr->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
if(!(dev->adapter_info.options & AAC_OPT_NEW_COMM)) {
/*
* Worst case size that could cause sg overflow when
* we break up SG elements that are larger than 64KB.
* Would be nice if we could tell the SCSI layer what
* the maximum SG element size can be. Worst case is
* (sg_tablesize-1) 4KB elements with one 64KB
* element.
* 32bit -> 468 or 238KB 64bit -> 424 or 212KB
*/
dev->scsi_host_ptr->max_sectors =
(dev->scsi_host_ptr->sg_tablesize * 8) + 112;
}
fib_complete(fibptr);
fib_free(fibptr);
......@@ -747,8 +810,10 @@ static void read_callback(void *context, struct fib * fibptr)
if (le32_to_cpu(readreply->status) == ST_OK)
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_GOOD;
else {
printk(KERN_WARNING "read_callback: read failed, status = %d\n",
#ifdef AAC_DETAILED_STATUS_INFO
printk(KERN_WARNING "read_callback: io failed, status = %d\n",
le32_to_cpu(readreply->status));
#endif
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
HARDWARE_ERROR,
......@@ -842,7 +907,8 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
lba = (scsicmd->cmnd[2] << 24) | (scsicmd->cmnd[3] << 16) | (scsicmd->cmnd[4] << 8) | scsicmd->cmnd[5];
count = (scsicmd->cmnd[7] << 8) | scsicmd->cmnd[8];
}
dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %u, t = %ld.\n", smp_processor_id(), lba, jiffies));
dprintk((KERN_DEBUG "aac_read[cpu %d]: lba = %u, t = %ld.\n",
smp_processor_id(), (unsigned long long)lba, jiffies));
/*
* Alocate and initialize a Fib
*/
......@@ -852,7 +918,7 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
fib_init(cmd_fibcontext);
if(dev->dac_support == 1) {
if (dev->dac_support == 1) {
struct aac_read64 *readcmd;
readcmd = (struct aac_read64 *) fib_data(cmd_fibcontext);
readcmd->command = cpu_to_le32(VM_CtHostRead64);
......@@ -886,14 +952,11 @@ static int aac_read(struct scsi_cmnd * scsicmd, int cid)
readcmd->block = cpu_to_le32(lba);
readcmd->count = cpu_to_le32(count * 512);
if (count * 512 > (64 * 1024))
BUG();
aac_build_sg(scsicmd, &readcmd->sg);
fibsize = sizeof(struct aac_read) +
((le32_to_cpu(readcmd->sg.count) - 1) *
sizeof (struct sgentry));
BUG_ON (fibsize > (sizeof(struct hw_fib) -
BUG_ON (fibsize > (dev->max_fib_size -
sizeof(struct aac_fibhdr)));
/*
* Now send the Fib to the adapter
......@@ -976,7 +1039,7 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
fibsize = sizeof(struct aac_write64) +
((le32_to_cpu(writecmd->sg.count) - 1) *
sizeof (struct sgentry64));
BUG_ON (fibsize > (sizeof(struct hw_fib) -
BUG_ON (fibsize > (dev->max_fib_size -
sizeof(struct aac_fibhdr)));
/*
* Now send the Fib to the adapter
......@@ -998,15 +1061,11 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
writecmd->sg.count = cpu_to_le32(1);
/* ->stable is not used - it did mean which type of write */
if (count * 512 > (64 * 1024)) {
BUG();
}
aac_build_sg(scsicmd, &writecmd->sg);
fibsize = sizeof(struct aac_write) +
((le32_to_cpu(writecmd->sg.count) - 1) *
sizeof (struct sgentry));
BUG_ON (fibsize > (sizeof(struct hw_fib) -
BUG_ON (fibsize > (dev->max_fib_size -
sizeof(struct aac_fibhdr)));
/*
* Now send the Fib to the adapter
......@@ -1025,7 +1084,6 @@ static int aac_write(struct scsi_cmnd * scsicmd, int cid)
*/
if (status == -EINPROGRESS)
{
dprintk("write queued.\n");
return 0;
}
......@@ -1111,7 +1169,7 @@ static int aac_synchronize(struct scsi_cmnd *scsicmd, int cid)
return SCSI_MLQUEUE_DEVICE_BUSY;
/*
* Alocate and initialize a Fib
* Allocate and initialize a Fib
*/
if (!(cmd_fibcontext =
fib_alloc((struct aac_dev *)scsicmd->device->host->hostdata)))
......@@ -1403,7 +1461,7 @@ int aac_scsi_cmd(struct scsi_cmnd * scsicmd)
/*
* Unhandled commands
*/
printk(KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]);
dprintk((KERN_WARNING "Unhandled SCSI Command: 0x%x.\n", scsicmd->cmnd[0]));
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
set_sense((u8 *) &dev->fsa_dev[cid].sense_data,
ILLEGAL_REQUEST, SENCODE_INVALID_COMMAND,
......@@ -1818,7 +1876,7 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
fibsize = sizeof (struct aac_srb) - sizeof (struct sgentry) +
((le32_to_cpu(srbcmd->sg.count) & 0xff) *
sizeof (struct sgentry64));
BUG_ON (fibsize > (sizeof(struct hw_fib) -
BUG_ON (fibsize > (dev->max_fib_size -
sizeof(struct aac_fibhdr)));
/*
......@@ -1840,7 +1898,7 @@ static int aac_send_srb_fib(struct scsi_cmnd* scsicmd)
fibsize = sizeof (struct aac_srb) +
(((le32_to_cpu(srbcmd->sg.count) & 0xff) - 1) *
sizeof (struct sgentry));
BUG_ON (fibsize > (sizeof(struct hw_fib) -
BUG_ON (fibsize > (dev->max_fib_size -
sizeof(struct aac_fibhdr)));
/*
......
......@@ -8,12 +8,18 @@
#define MAXIMUM_NUM_CONTAINERS 32
#define AAC_NUM_FIB (256 + 64)
#define AAC_NUM_IO_FIB 100
#define AAC_NUM_MGT_FIB 8
#define AAC_NUM_IO_FIB (512 - AAC_NUM_MGT_FIB)
#define AAC_NUM_FIB (AAC_NUM_IO_FIB + AAC_NUM_MGT_FIB)
#define AAC_MAX_LUN (8)
#define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff)
/*
* max_sectors is an unsigned short, otherwise limit is 0x100000000 / 512
* Linux has starvation problems if we permit larger than 4MB I/O ...
*/
#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)8192)
/*
* These macros convert from physical channels to virtual channels
......@@ -303,12 +309,9 @@ struct aac_fibhdr {
} _u;
};
#define FIB_DATA_SIZE_IN_BYTES (512 - sizeof(struct aac_fibhdr))
struct hw_fib {
struct aac_fibhdr header;
u8 data[FIB_DATA_SIZE_IN_BYTES]; // Command specific data
u8 data[512-sizeof(struct aac_fibhdr)]; // Command specific data
};
/*
......@@ -370,11 +373,12 @@ struct hw_fib {
#define RequestAdapterInfo 703
#define IsAdapterPaused 704
#define SendHostTime 705
#define LastMiscCommand 706
#define RequestSupplementAdapterInfo 706
#define LastMiscCommand 707
//
// Commands that will target the failover level on the FSA adapter
//
/*
* Commands that will target the failover level on the FSA adapter
*/
enum fib_xfer_state {
HostOwned = (1<<0),
......@@ -407,6 +411,7 @@ enum fib_xfer_state {
*/
#define ADAPTER_INIT_STRUCT_REVISION 3
#define ADAPTER_INIT_STRUCT_REVISION_4 4 // rocket science
struct aac_init
{
......@@ -424,6 +429,14 @@ struct aac_init
__le32 HostPhysMemPages; /* number of 4k pages of host
physical memory */
__le32 HostElapsedSeconds; /* number of seconds since 1970. */
/*
* ADAPTER_INIT_STRUCT_REVISION_4 begins here
*/
__le32 InitFlags; /* flags for supported features */
#define INITFLAGS_NEW_COMM_SUPPORTED 0x00000001
__le32 MaxIoCommands; /* max outstanding commands */
__le32 MaxIoSize; /* largest I/O command */
__le32 MaxFibSize; /* largest FIB to adapter */
};
enum aac_log_level {
......@@ -447,7 +460,7 @@ struct adapter_ops
{
void (*adapter_interrupt)(struct aac_dev *dev);
void (*adapter_notify)(struct aac_dev *dev, u32 event);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 *status);
int (*adapter_sync_cmd)(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4);
int (*adapter_check_health)(struct aac_dev *dev);
};
......@@ -567,6 +580,7 @@ struct sa_drawbridge_CSR {
#define Mailbox3 SaDbCSR.MAILBOX3
#define Mailbox4 SaDbCSR.MAILBOX4
#define Mailbox5 SaDbCSR.MAILBOX5
#define Mailbox6 SaDbCSR.MAILBOX6
#define Mailbox7 SaDbCSR.MAILBOX7
#define DoorbellReg_p SaDbCSR.PRISETIRQ
......@@ -812,6 +826,25 @@ struct aac_adapter_info
__le32 OEM;
};
struct aac_supplement_adapter_info
{
u8 AdapterTypeText[17+1];
u8 Pad[2];
__le32 FlashMemoryByteSize;
__le32 FlashImageId;
__le32 MaxNumberPorts;
__le32 Version;
__le32 FeatureBits;
u8 SlotNumber;
u8 ReservedPad0[0];
u8 BuildDate[12];
__le32 CurrentNumberPorts;
__le32 ReservedGrowth[24];
};
#define AAC_FEATURE_FALCON 0x00000010
#define AAC_SIS_VERSION_V3 3
#define AAC_SIS_SLOT_UNKNOWN 0xFF
/*
* Battery platforms
*/
......@@ -856,6 +889,12 @@ struct aac_dev
int id;
u16 irq_mask;
/*
* negotiated FIB settings
*/
unsigned max_fib_size;
unsigned sg_tablesize;
/*
* Map for 128 fib objects (64k)
*/
......@@ -915,12 +954,14 @@ struct aac_dev
u32 aif_thread;
struct completion aif_completion;
struct aac_adapter_info adapter_info;
struct aac_supplement_adapter_info supplement_adapter_info;
/* These are in adapter info but they are in the io flow so
* lets break them out so we don't have to do an AND to check them
*/
u8 nondasd_support;
u8 dac_support;
u8 raid_scsi_mode;
u8 printf_enabled;
};
#define aac_adapter_interrupt(dev) \
......@@ -929,6 +970,8 @@ struct aac_dev
#define aac_adapter_notify(dev, event) \
(dev)->a_ops.adapter_notify(dev, event)
#define aac_adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4) \
(dev)->a_ops.adapter_sync_cmd(dev, command, p1, p2, p3, p4, p5, p6, status, r1, r2, r3, r4)
#define aac_adapter_check_health(dev) \
(dev)->a_ops.adapter_check_health(dev)
......@@ -1327,7 +1370,7 @@ struct aac_commit_config {
};
/*
* Query for Container Configuration Count
* Query for Container Configuration Status
*/
#define CT_GET_CONTAINER_COUNT 4
......@@ -1481,6 +1524,7 @@ struct revision
#define FSACTL_GET_PCI_INFO CTL_CODE(2119, METHOD_BUFFERED)
#define FSACTL_FORCE_DELETE_DISK CTL_CODE(2120, METHOD_NEITHER)
#define FSACTL_GET_CONTAINERS 2131
#define FSACTL_SEND_LARGE_FIB CTL_CODE(2138, METHOD_BUFFERED)
struct aac_common
......@@ -1667,3 +1711,5 @@ int fib_adapter_complete(struct fib * fibptr, unsigned short size);
struct aac_driver_ident* aac_get_driver_ident(int devtype);
int aac_get_adapter_info(struct aac_dev* dev);
int aac_send_shutdown(struct aac_dev *dev);
extern int numacb;
extern int acbsize;
This diff is collapsed.
......@@ -39,6 +39,7 @@
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/mm.h>
#include <scsi/scsi_host.h>
#include <asm/semaphore.h>
#include "aacraid.h"
......@@ -49,8 +50,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
{
unsigned char *base;
unsigned long size, align;
unsigned long fibsize = 4096;
unsigned long printfbufsiz = 256;
const unsigned long fibsize = 4096;
const unsigned long printfbufsiz = 256;
struct aac_init *init;
dma_addr_t phys;
......@@ -74,6 +75,8 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
init = dev->init;
init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION);
if (dev->max_fib_size != sizeof(struct hw_fib))
init->InitStructRevision = cpu_to_le32(ADAPTER_INIT_STRUCT_REVISION_4);
init->MiniPortRevision = cpu_to_le32(Sa_MINIPORT_REVISION);
init->fsrev = cpu_to_le32(dev->fsrev);
......@@ -110,6 +113,10 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co
init->HostPhysMemPages = cpu_to_le32(AAC_MAX_HOSTPHYSMEMPAGES);
}
init->InitFlags = 0;
init->MaxIoCommands = cpu_to_le32(dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB);
init->MaxIoSize = cpu_to_le32(dev->scsi_host_ptr->max_sectors << 9);
init->MaxFibSize = cpu_to_le32(dev->max_fib_size);
/*
* Increment the base address by the amount already used
......@@ -173,6 +180,8 @@ int aac_send_shutdown(struct aac_dev * dev)
int status;
fibctx = fib_alloc(dev);
if (!fibctx)
return -ENOMEM;
fib_init(fibctx);
cmd = (struct aac_close *) fib_data(fibctx);
......@@ -293,6 +302,79 @@ static int aac_comm_init(struct aac_dev * dev)
struct aac_dev *aac_init_adapter(struct aac_dev *dev)
{
u32 status[5];
struct Scsi_Host * host = dev->scsi_host_ptr;
/*
* Check the preferred comm settings, defaults from template.
*/
dev->max_fib_size = sizeof(struct hw_fib);
dev->sg_tablesize = host->sg_tablesize = (dev->max_fib_size
- sizeof(struct aac_fibhdr)
- sizeof(struct aac_write) + sizeof(struct sgmap))
/ sizeof(struct sgmap);
if ((!aac_adapter_sync_cmd(dev, GET_COMM_PREFERRED_SETTINGS,
0, 0, 0, 0, 0, 0,
status+0, status+1, status+2, status+3, status+4))
&& (status[0] == 0x00000001)) {
/*
* status[1] >> 16 maximum command size in KB
* status[1] & 0xFFFF maximum FIB size
* status[2] >> 16 maximum SG elements to driver
* status[2] & 0xFFFF maximum SG elements from driver
* status[3] & 0xFFFF maximum number FIBs outstanding
*/
host->max_sectors = (status[1] >> 16) << 1;
dev->max_fib_size = status[1] & 0xFFFF;
host->sg_tablesize = status[2] >> 16;
dev->sg_tablesize = status[2] & 0xFFFF;
host->can_queue = (status[3] & 0xFFFF) - AAC_NUM_MGT_FIB;
/*
* NOTE:
* All these overrides are based on a fixed internal
* knowledge and understanding of existing adapters,
* acbsize should be set with caution.
*/
if (acbsize == 512) {
host->max_sectors = AAC_MAX_32BIT_SGBCOUNT;
dev->max_fib_size = 512;
dev->sg_tablesize = host->sg_tablesize
= (512 - sizeof(struct aac_fibhdr)
- sizeof(struct aac_write) + sizeof(struct sgmap))
/ sizeof(struct sgmap);
host->can_queue = AAC_NUM_IO_FIB;
} else if (acbsize == 2048) {
host->max_sectors = 512;
dev->max_fib_size = 2048;
host->sg_tablesize = 65;
dev->sg_tablesize = 81;
host->can_queue = 512 - AAC_NUM_MGT_FIB;
} else if (acbsize == 4096) {
host->max_sectors = 1024;
dev->max_fib_size = 4096;
host->sg_tablesize = 129;
dev->sg_tablesize = 166;
host->can_queue = 256 - AAC_NUM_MGT_FIB;
} else if (acbsize == 8192) {
host->max_sectors = 2048;
dev->max_fib_size = 8192;
host->sg_tablesize = 257;
dev->sg_tablesize = 337;
host->can_queue = 128 - AAC_NUM_MGT_FIB;
} else if (acbsize > 0) {
printk("Illegal acbsize=%d ignored\n", acbsize);
}
}
{
if (numacb > 0) {
if (numacb < host->can_queue)
host->can_queue = numacb;
else
printk("numacb=%d ignored\n", numacb);
}
}
/*
* Ok now init the communication subsystem
*/
......
......@@ -25,7 +25,7 @@
* commsup.c
*
* Abstract: Contain all routines that are required for FSA host/adapter
* commuication.
* communication.
*
*/
......@@ -38,6 +38,7 @@
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <asm/semaphore.h>
#include "aacraid.h"
......@@ -52,7 +53,13 @@
static int fib_map_alloc(struct aac_dev *dev)
{
if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, &dev->hw_fib_pa))==NULL)
dprintk((KERN_INFO
"allocate hardware fibs pci_alloc_consistent(%p, %d * (%d + %d), %p)\n",
dev->pdev, dev->max_fib_size, dev->scsi_host_ptr->can_queue,
AAC_NUM_MGT_FIB, &dev->hw_fib_pa));
if((dev->hw_fib_va = pci_alloc_consistent(dev->pdev, dev->max_fib_size
* (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB),
&dev->hw_fib_pa))==NULL)
return -ENOMEM;
return 0;
}
......@@ -67,7 +74,7 @@ static int fib_map_alloc(struct aac_dev *dev)
void fib_map_free(struct aac_dev *dev)
{
pci_free_consistent(dev->pdev, sizeof(struct hw_fib) * AAC_NUM_FIB, dev->hw_fib_va, dev->hw_fib_pa);
pci_free_consistent(dev->pdev, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB), dev->hw_fib_va, dev->hw_fib_pa);
}
/**
......@@ -85,16 +92,21 @@ int fib_setup(struct aac_dev * dev)
dma_addr_t hw_fib_pa;
int i;
if(fib_map_alloc(dev)<0)
while (((i = fib_map_alloc(dev)) == -ENOMEM)
&& (dev->scsi_host_ptr->can_queue > (64 - AAC_NUM_MGT_FIB))) {
dev->init->MaxIoCommands = cpu_to_le32((dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB) >> 1);
dev->scsi_host_ptr->can_queue = le32_to_cpu(dev->init->MaxIoCommands) - AAC_NUM_MGT_FIB;
}
if (i<0)
return -ENOMEM;
hw_fib_va = dev->hw_fib_va;
hw_fib_pa = dev->hw_fib_pa;
memset(hw_fib_va, 0, sizeof(struct hw_fib) * AAC_NUM_FIB);
memset(hw_fib_va, 0, dev->max_fib_size * (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB));
/*
* Initialise the fibs
*/
for (i = 0, fibptr = &dev->fibs[i]; i < AAC_NUM_FIB; i++, fibptr++)
for (i = 0, fibptr = &dev->fibs[i]; i < (dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++, fibptr++)
{
fibptr->dev = dev;
fibptr->hw_fib = hw_fib_va;
......@@ -103,15 +115,15 @@ int fib_setup(struct aac_dev * dev)
init_MUTEX_LOCKED(&fibptr->event_wait);
spin_lock_init(&fibptr->event_lock);
hw_fib_va->header.XferState = cpu_to_le32(0xffffffff);
hw_fib_va->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib));
hw_fib_va->header.SenderSize = cpu_to_le16(dev->max_fib_size);
fibptr->hw_fib_pa = hw_fib_pa;
hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + sizeof(struct hw_fib));
hw_fib_pa = hw_fib_pa + sizeof(struct hw_fib);
hw_fib_va = (struct hw_fib *)((unsigned char *)hw_fib_va + dev->max_fib_size);
hw_fib_pa = hw_fib_pa + dev->max_fib_size;
}
/*
* Add the fib chain to the free list
*/
dev->fibs[AAC_NUM_FIB-1].next = NULL;
dev->fibs[dev->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB - 1].next = NULL;
/*
* Enable this to debug out of queue space
*/
......@@ -124,7 +136,7 @@ int fib_setup(struct aac_dev * dev)
* @dev: Adapter to allocate the fib for
*
* Allocate a fib from the adapter fib pool. If the pool is empty we
* wait for fibs to become free.
* return NULL.
*/
struct fib * fib_alloc(struct aac_dev *dev)
......@@ -133,10 +145,10 @@ struct fib * fib_alloc(struct aac_dev *dev)
unsigned long flags;
spin_lock_irqsave(&dev->fib_lock, flags);
fibptr = dev->free_fib;
/* Cannot sleep here or you get hangs. Instead we did the
maths at compile time. */
if(!fibptr)
BUG();
if(!fibptr){
spin_unlock_irqrestore(&dev->fib_lock, flags);
return fibptr;
}
dev->free_fib = fibptr->next;
spin_unlock_irqrestore(&dev->fib_lock, flags);
/*
......@@ -196,11 +208,11 @@ void fib_init(struct fib *fibptr)
struct hw_fib *hw_fib = fibptr->hw_fib;
hw_fib->header.StructType = FIB_MAGIC;
hw_fib->header.Size = cpu_to_le16(sizeof(struct hw_fib));
hw_fib->header.Size = cpu_to_le16(fibptr->dev->max_fib_size);
hw_fib->header.XferState = cpu_to_le32(HostOwned | FibInitialized | FibEmpty | FastResponseCapable);
hw_fib->header.SenderFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
hw_fib->header.ReceiverFibAddress = cpu_to_le32(fibptr->hw_fib_pa);
hw_fib->header.SenderSize = cpu_to_le16(sizeof(struct hw_fib));
hw_fib->header.SenderSize = cpu_to_le16(fibptr->dev->max_fib_size);
}
/**
......@@ -279,7 +291,7 @@ static int aac_get_entry (struct aac_dev * dev, u32 qid, struct aac_entry **entr
}
if ((*index + 1) == le32_to_cpu(*(q->headers.consumer))) { /* Queue is full */
printk(KERN_WARNING "Queue %d full, %d outstanding.\n",
printk(KERN_WARNING "Queue %d full, %u outstanding.\n",
qid, q->numpending);
return 0;
} else {
......@@ -743,9 +755,11 @@ int fib_complete(struct fib * fibptr)
void aac_printf(struct aac_dev *dev, u32 val)
{
char *cp = dev->printfbuf;
if (dev->printf_enabled)
{
int length = val & 0xffff;
int level = (val >> 16) & 0xffff;
char *cp = dev->printfbuf;
/*
* The size of the printfbuf is set in port.c
......@@ -759,6 +773,7 @@ void aac_printf(struct aac_dev *dev, u32 val)
printk(KERN_WARNING "aacraid:%s", cp);
else
printk(KERN_INFO "aacraid:%s", cp);
}
memset(cp, 0, 256);
}
......
......@@ -347,10 +347,16 @@ static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
static int aac_slave_configure(struct scsi_device *sdev)
{
struct Scsi_Host *host = sdev->host;
if (sdev->tagged_supported)
scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128);
else
scsi_adjust_queue_depth(sdev, 0, 1);
if (host->max_sectors < AAC_MAX_32BIT_SGBCOUNT)
blk_queue_max_segment_size(sdev->request_queue, 65536);
return 0;
}
......@@ -439,11 +445,11 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
static int aac_cfg_open(struct inode *inode, struct file *file)
{
struct aac_dev *aac;
unsigned minor = iminor(inode);
unsigned minor_number = iminor(inode);
int err = -ENODEV;
list_for_each_entry(aac, &aac_devices, entry) {
if (aac->id == minor) {
if (aac->id == minor_number) {
file->private_data = aac;
err = 0;
break;
......@@ -489,6 +495,7 @@ static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long
case FSACTL_DELETE_DISK:
case FSACTL_FORCE_DELETE_DISK:
case FSACTL_GET_CONTAINERS:
case FSACTL_SEND_LARGE_FIB:
ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
break;
......@@ -538,7 +545,7 @@ static struct file_operations aac_cfg_fops = {
static struct scsi_host_template aac_driver_template = {
.module = THIS_MODULE,
.name = "AAC",
.proc_name = "aacraid",
.proc_name = AAC_DRIVERNAME,
.info = aac_info,
.ioctl = aac_ioctl,
#ifdef CONFIG_COMPAT
......@@ -612,7 +619,7 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
aac->cardtype = index;
INIT_LIST_HEAD(&aac->entry);
aac->fibs = kmalloc(sizeof(struct fib) * AAC_NUM_FIB, GFP_KERNEL);
aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL);
if (!aac->fibs)
goto out_free_host;
spin_lock_init(&aac->fib_lock);
......@@ -631,6 +638,24 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
aac_get_adapter_info(aac);
/*
* Lets override negotiations and drop the maximum SG limit to 34
*/
if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
(aac->scsi_host_ptr->sg_tablesize > 34)) {
aac->scsi_host_ptr->sg_tablesize = 34;
aac->scsi_host_ptr->max_sectors
= (aac->scsi_host_ptr->sg_tablesize * 8) + 112;
}
/*
* Firware printf works only with older firmware.
*/
if (aac_drivers[index].quirks & AAC_QUIRK_34SG)
aac->printf_enabled = 1;
else
aac->printf_enabled = 0;
/*
* max channel will be the physical channels plus 1 virtual channel
* all containers are on the virtual channel 0
......
......@@ -98,7 +98,9 @@ static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs)
* for its completion.
*/
static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
static int rkt_sync_cmd(struct aac_dev *dev, u32 command,
u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4)
{
unsigned long start;
int ok;
......@@ -107,12 +109,12 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
*/
rkt_writel(dev, InboundMailbox0, command);
/*
* Write the parameters into Mailboxes 1 - 4
* Write the parameters into Mailboxes 1 - 6
*/
rkt_writel(dev, InboundMailbox1, p1);
rkt_writel(dev, InboundMailbox2, 0);
rkt_writel(dev, InboundMailbox3, 0);
rkt_writel(dev, InboundMailbox4, 0);
rkt_writel(dev, InboundMailbox2, p2);
rkt_writel(dev, InboundMailbox3, p3);
rkt_writel(dev, InboundMailbox4, p4);
/*
* Clear the synch command doorbell to start on a clean slate.
*/
......@@ -169,6 +171,14 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
*/
if (status)
*status = rkt_readl(dev, IndexRegs.Mailbox[0]);
if (r1)
*r1 = rkt_readl(dev, IndexRegs.Mailbox[1]);
if (r2)
*r2 = rkt_readl(dev, IndexRegs.Mailbox[2]);
if (r3)
*r3 = rkt_readl(dev, IndexRegs.Mailbox[3]);
if (r4)
*r4 = rkt_readl(dev, IndexRegs.Mailbox[4]);
/*
* Clear the synch command doorbell.
*/
......@@ -190,8 +200,8 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
static void aac_rkt_interrupt_adapter(struct aac_dev *dev)
{
u32 ret;
rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0,
NULL, NULL, NULL, NULL, NULL);
}
/**
......@@ -220,7 +230,8 @@ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event)
rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
break;
case HostShutdown:
// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret);
// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
// NULL, NULL, NULL, NULL, NULL);
break;
case FastIo:
rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
......@@ -243,16 +254,10 @@ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event)
static void aac_rkt_start_adapter(struct aac_dev *dev)
{
u32 status;
struct aac_init *init;
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
/*
* Tell the adapter we are back and up and running so it will scan
* its command queues and enable our interrupts
*/
dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4);
/*
* First clear out all interrupts. Then enable the one's that we
* can handle.
......@@ -263,7 +268,8 @@ static void aac_rkt_start_adapter(struct aac_dev *dev)
rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
// We can only use a 32 bit address here
rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status);
rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
/**
......@@ -310,7 +316,8 @@ static int aac_rkt_check_health(struct aac_dev *dev)
post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
post->Post_Address = cpu_to_le32(baddr);
rkt_writel(dev, MUnit.IMRx[0], paddr);
rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
NULL, NULL, NULL, NULL, NULL);
pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
post, paddr);
if ((buffer[0] == '0') && (buffer[1] == 'x')) {
......
......@@ -98,7 +98,9 @@ static irqreturn_t aac_rx_intr(int irq, void *dev_id, struct pt_regs *regs)
* for its completion.
*/
static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
static int rx_sync_cmd(struct aac_dev *dev, u32 command,
u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
{
unsigned long start;
int ok;
......@@ -107,12 +109,12 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
*/
rx_writel(dev, InboundMailbox0, command);
/*
* Write the parameters into Mailboxes 1 - 4
* Write the parameters into Mailboxes 1 - 6
*/
rx_writel(dev, InboundMailbox1, p1);
rx_writel(dev, InboundMailbox2, 0);
rx_writel(dev, InboundMailbox3, 0);
rx_writel(dev, InboundMailbox4, 0);
rx_writel(dev, InboundMailbox2, p2);
rx_writel(dev, InboundMailbox3, p3);
rx_writel(dev, InboundMailbox4, p4);
/*
* Clear the synch command doorbell to start on a clean slate.
*/
......@@ -120,7 +122,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
/*
* Disable doorbell interrupts
*/
rx_writeb(dev, MUnit.OIMR, dev->OIMR |= 0x04);
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xff);
/*
* Force the completion of the mask register write before issuing
* the interrupt.
......@@ -169,6 +171,14 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
*/
if (status)
*status = rx_readl(dev, IndexRegs.Mailbox[0]);
if (r1)
*r1 = rx_readl(dev, IndexRegs.Mailbox[1]);
if (r2)
*r2 = rx_readl(dev, IndexRegs.Mailbox[2]);
if (r3)
*r3 = rx_readl(dev, IndexRegs.Mailbox[3]);
if (r4)
*r4 = rx_readl(dev, IndexRegs.Mailbox[4]);
/*
* Clear the synch command doorbell.
*/
......@@ -190,8 +200,7 @@ static int rx_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status)
static void aac_rx_interrupt_adapter(struct aac_dev *dev)
{
u32 ret;
rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
rx_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
/**
......@@ -220,7 +229,8 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3);
break;
case HostShutdown:
// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret);
// rx_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
// NULL, NULL, NULL, NULL, NULL);
break;
case FastIo:
rx_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6);
......@@ -243,16 +253,10 @@ static void aac_rx_notify_adapter(struct aac_dev *dev, u32 event)
static void aac_rx_start_adapter(struct aac_dev *dev)
{
u32 status;
struct aac_init *init;
init = dev->init;
init->HostElapsedSeconds = cpu_to_le32(get_seconds());
/*
* Tell the adapter we are back and up and running so it will scan
* its command queues and enable our interrupts
*/
dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4);
/*
* First clear out all interrupts. Then enable the one's that we
* can handle.
......@@ -263,7 +267,8 @@ static void aac_rx_start_adapter(struct aac_dev *dev)
rx_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb);
// We can only use a 32 bit address here
rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status);
rx_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
}
/**
......@@ -310,7 +315,8 @@ static int aac_rx_check_health(struct aac_dev *dev)
post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS);
post->Post_Address = cpu_to_le32(baddr);
rx_writel(dev, MUnit.IMRx[0], paddr);
rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status);
rx_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0,
NULL, NULL, NULL, NULL, NULL);
pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS),
post, paddr);
if ((buffer[0] == '0') && (buffer[1] == 'x')) {
......
......@@ -106,7 +106,10 @@ static void aac_sa_notify_adapter(struct aac_dev *dev, u32 event)
sa_writew(dev, DoorbellReg_s,DOORBELL_3);
break;
case HostShutdown:
//sa_sync_cmd(dev, HOST_CRASHING, 0, &ret);
/*
sa_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0,
NULL, NULL, NULL, NULL, NULL);
*/
break;
case FastIo:
sa_writew(dev, DoorbellReg_s,DOORBELL_6);
......@@ -132,7 +135,9 @@ static void aac_sa_notify_adapter(struct aac_dev *dev, u32 event)
* for its completion.
*/
static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret)
static int sa_sync_cmd(struct aac_dev *dev, u32 command,
u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
u32 *ret, u32 *r1, u32 *r2, u32 *r3, u32 *r4)
{
unsigned long start;
int ok;
......@@ -144,9 +149,10 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret)
* Write the parameters into Mailboxes 1 - 4
*/
sa_writel(dev, Mailbox1, p1);
sa_writel(dev, Mailbox2, 0);
sa_writel(dev, Mailbox3, 0);
sa_writel(dev, Mailbox4, 0);
sa_writel(dev, Mailbox2, p2);
sa_writel(dev, Mailbox3, p3);
sa_writel(dev, Mailbox4, p4);
/*
* Clear the synch command doorbell to start on a clean slate.
*/
......@@ -188,6 +194,14 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret)
*/
if (ret)
*ret = sa_readl(dev, Mailbox0);
if (r1)
*r1 = sa_readl(dev, Mailbox1);
if (r2)
*r2 = sa_readl(dev, Mailbox2);
if (r3)
*r3 = sa_readl(dev, Mailbox3);
if (r4)
*r4 = sa_readl(dev, Mailbox4);
return 0;
}
......@@ -201,7 +215,8 @@ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *ret)
static void aac_sa_interrupt_adapter (struct aac_dev *dev)
{
u32 ret;
sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret);
sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0,
&ret, NULL, NULL, NULL, NULL);
}
/**
......@@ -233,7 +248,9 @@ static void aac_sa_start_adapter(struct aac_dev *dev)
sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff);
sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4));
/* We can only use a 32 bit address here */
sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &ret);
sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS,
(u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0,
&ret, NULL, NULL, NULL, NULL);
}
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment