clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks

There could be few clocks where the clock status bit is not
required to be polled as the clock on/off would be controlled
by enabling/disabling external source. Add support for the
same by introducing new flag named as 'BRANCH_HALT_SKIP'.
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
[sboyd@kernel.org: Rename flag to BRANCH_HALT_SKIP]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

drivers/clk/qcom/clk-branch.c

@@ -77,8 +77,11 @@ static int clk_branch_wait(const struct clk_branch *br, bool enabling,
 	bool voted = br->halt_check & BRANCH_VOTED;
 	const char *name = clk_hw_get_name(&br->clkr.hw);
 
-	/* Skip checking halt bit if the clock is in hardware gated mode */
-	if (clk_branch_in_hwcg_mode(br))
+	/*
+	 * Skip checking halt bit if we're explicitly ignoring the bit or the
+	 * clock is in hardware gated mode
+	 */
+	if (br->halt_check == BRANCH_HALT_SKIP || clk_branch_in_hwcg_mode(br))
 		return 0;
 
 	if (br->halt_check == BRANCH_HALT_DELAY || (!enabling && voted)) {

drivers/clk/qcom/clk-branch.h

@@ -42,6 +42,7 @@ struct clk_branch {
 #define BRANCH_HALT_ENABLE		1 /* pol: 0 = halt */
 #define BRANCH_HALT_ENABLE_VOTED	(BRANCH_HALT_ENABLE | BRANCH_VOTED)
 #define BRANCH_HALT_DELAY		2 /* No bit to check; just delay */
+#define BRANCH_HALT_SKIP		3 /* Don't check halt bit */
 
 	struct clk_regmap clkr;
 };