Merge tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - fix regressions detecting HS/HS DDR eMMC cards related to CMD6

  MMC host:
   - mmc: mxs-mmc: Fix additional cycles after transmission stop
   - sdhci-acpi: Only powered up enabled acpi child devices
   - meson: avoid possible NULL dereference"

* tag 'mmc-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Restore parts of the polling policy when switch to HS/HS DDR
  mmc: mxs-mmc: Fix additional cycles after transmission stop
  mmc: sdhci-acpi: Only powered up enabled acpi child devices
  MMC: meson: avoid possible NULL dereference

drivers/mmc/core/mmc_ops.c

@@ -506,9 +506,6 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
 		}
 	} while (busy);
 
-	if (host->ops->card_busy && send_status)
-		return mmc_switch_status(card);
-
 	return 0;
 }
 
@@ -577,24 +574,26 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 	if (!use_busy_signal)
 		goto out;
 
-	/* Switch to new timing before poll and check switch status. */
-	if (timing)
-		mmc_set_timing(host, timing);
-
 	/*If SPI or used HW busy detection above, then we don't need to poll. */
 	if (((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) ||
-		mmc_host_is_spi(host)) {
-		if (send_status)
-			err = mmc_switch_status(card);
+		mmc_host_is_spi(host))
 		goto out_tim;
-	}
 
 	/* Let's try to poll to find out when the command is completed. */
 	err = mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err);
+	if (err)
+		goto out;
 
 out_tim:
+	/* Switch to new timing before check switch status. */
+	if (timing)
+		mmc_set_timing(host, timing);
+
+	if (send_status) {
+		err = mmc_switch_status(card);
 		if (err && timing)
 			mmc_set_timing(host, old_timing);
+	}
 out:
 	mmc_retune_release(host);
 

drivers/mmc/host/meson-gx-mmc.c

@@ -578,13 +578,15 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
 {
 	struct meson_host *host = dev_id;
 	struct mmc_request *mrq;
-	struct mmc_command *cmd = host->cmd;
+	struct mmc_command *cmd;
 	u32 irq_en, status, raw_status;
 	irqreturn_t ret = IRQ_HANDLED;
 
 	if (WARN_ON(!host))
 		return IRQ_NONE;
 
+	cmd = host->cmd;
+
 	mrq = host->mrq;
 
 	if (WARN_ON(!mrq))
@@ -670,10 +672,10 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
 	int ret = IRQ_HANDLED;
 
 	if (WARN_ON(!mrq))
-		ret = IRQ_NONE;
+		return IRQ_NONE;
 
 	if (WARN_ON(!cmd))
-		ret = IRQ_NONE;
+		return IRQ_NONE;
 
 	data = cmd->data;
 	if (data) {

drivers/mmc/host/mxs-mmc.c

@@ -309,6 +309,9 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host)
 	cmd0 = BF_SSP(cmd->opcode, CMD0_CMD);
 	cmd1 = cmd->arg;
 
+	if (cmd->opcode == MMC_STOP_TRANSMISSION)
+		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
+
 	if (host->sdio_irq_en) {
 		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
 		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
@@ -417,8 +420,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host)
 		       ssp->base + HW_SSP_BLOCK_SIZE);
 	}
 
-	if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
-	    (cmd->opcode == SD_IO_RW_EXTENDED))
+	if (cmd->opcode == SD_IO_RW_EXTENDED)
 		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
 
 	cmd1 = cmd->arg;

drivers/mmc/host/sdhci-acpi.c

@@ -395,6 +395,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 	/* Power on the SDHCI controller and its children */
 	acpi_device_fix_up_power(device);
 	list_for_each_entry(child, &device->children, node)
+		if (child->status.present && child->status.enabled)
 			acpi_device_fix_up_power(child);
 
 	if (acpi_bus_get_status(device) || !device->status.present)