Merge tag 'drm-intel-fixes-2016-11-01' of git://anongit.freedesktop.org/drm-intel into drm-fixes

batch of scattered i915 fixes.

* tag 'drm-intel-fixes-2016-11-01' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation
  drm/i915: Remove two invalid warns
  drm/i915: Rotated view does not need a fence
  drm/i915/fbc: fix CFB size calculation for gen8+
  drm: i915: Wait for fences on new fb, not old
  drm/i915: Clean up DDI DDC/AUX CH sanitation
  drm/i915: Respect alternate_aux_channel for all DDI ports
  drm/i915/gen9: fix watermarks when using the pipe scaler
  drm/i915: Fix mismatched INIT power domain disabling during suspend
  drm/i915: fix a read size argument
  drm/i915: Use fence_write() from rpm resume
  drm/i915/gen9: fix DDB partitioning for multi-screen cases
  drm/i915: workaround sparse warning on variable length arrays
  drm/i915: keep declarations in i915_drv.h

drivers/gpu/drm/i915/i915_drv.c

@@ -1447,8 +1447,6 @@ static int i915_drm_suspend(struct drm_device *dev)
 
 	dev_priv->suspend_count++;
 
-	intel_display_set_init_power(dev_priv, false);
-
 	intel_csr_ucode_suspend(dev_priv);
 
 out:
@@ -1466,6 +1464,8 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation)
 
 	disable_rpm_wakeref_asserts(dev_priv);
 
+	intel_display_set_init_power(dev_priv, false);
+
 	fw_csr = !IS_BROXTON(dev_priv) &&
 		suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload;
 	/*

drivers/gpu/drm/i915/i915_drv.h

@@ -2883,6 +2883,11 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level,
 extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
 			      unsigned long arg);
 #endif
+extern const struct dev_pm_ops i915_pm_ops;
+
+extern int i915_driver_load(struct pci_dev *pdev,
+			    const struct pci_device_id *ent);
+extern void i915_driver_unload(struct drm_device *dev);
 extern int intel_gpu_reset(struct drm_i915_private *dev_priv, u32 engine_mask);
 extern bool intel_has_gpu_reset(struct drm_i915_private *dev_priv);
 extern void i915_reset(struct drm_i915_private *dev_priv);

drivers/gpu/drm/i915/i915_gem.c

@@ -3550,8 +3550,6 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
 
 	vma->display_alignment = max_t(u64, vma->display_alignment, alignment);
 
-	WARN_ON(obj->pin_display > i915_vma_pin_count(vma));
-
 	i915_gem_object_flush_cpu_write_domain(obj);
 
 	old_write_domain = obj->base.write_domain;
@@ -3588,7 +3586,6 @@ i915_gem_object_unpin_from_display_plane(struct i915_vma *vma)
 		list_move_tail(&vma->vm_link, &vma->vm->inactive_list);
 
 	i915_vma_unpin(vma);
-	WARN_ON(vma->obj->pin_display > i915_vma_pin_count(vma));
 }
 
 /**
@@ -3745,7 +3742,12 @@ void __i915_vma_set_map_and_fenceable(struct i915_vma *vma)
 	mappable = (vma->node.start + fence_size <=
 		    dev_priv->ggtt.mappable_end);
 
-	if (mappable && fenceable)
+	/*
+	 * Explicitly disable for rotated VMA since the display does not
+	 * need the fence and the VMA is not accessible to other users.
+	 */
+	if (mappable && fenceable &&
+	    vma->ggtt_view.type != I915_GGTT_VIEW_ROTATED)
 		vma->flags |= I915_VMA_CAN_FENCE;
 	else
 		vma->flags &= ~I915_VMA_CAN_FENCE;

drivers/gpu/drm/i915/i915_gem_fence.c

@@ -290,6 +290,8 @@ i915_vma_put_fence(struct i915_vma *vma)
 {
 	struct drm_i915_fence_reg *fence = vma->fence;
 
+	assert_rpm_wakelock_held(to_i915(vma->vm->dev));
+
 	if (!fence)
 		return 0;
 
@@ -341,6 +343,8 @@ i915_vma_get_fence(struct i915_vma *vma)
 	struct drm_i915_fence_reg *fence;
 	struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL;
 
+	assert_rpm_wakelock_held(to_i915(vma->vm->dev));
+
 	/* Just update our place in the LRU if our fence is getting reused. */
 	if (vma->fence) {
 		fence = vma->fence;
@@ -371,6 +375,12 @@ void i915_gem_restore_fences(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	int i;
 
+	/* Note that this may be called outside of struct_mutex, by
+	 * runtime suspend/resume. The barrier we require is enforced by
+	 * rpm itself - all access to fences/GTT are only within an rpm
+	 * wakeref, and to acquire that wakeref you must pass through here.
+	 */
+
 	for (i = 0; i < dev_priv->num_fence_regs; i++) {
 		struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i];
 		struct i915_vma *vma = reg->vma;
@@ -379,10 +389,17 @@ void i915_gem_restore_fences(struct drm_device *dev)
 		 * Commit delayed tiling changes if we have an object still
 		 * attached to the fence, otherwise just clear the fence.
 		 */
-		if (vma && !i915_gem_object_is_tiled(vma->obj))
+		if (vma && !i915_gem_object_is_tiled(vma->obj)) {
+			GEM_BUG_ON(!reg->dirty);
+			GEM_BUG_ON(vma->obj->fault_mappable);
+
+			list_move(&reg->link, &dev_priv->mm.fence_list);
+			vma->fence = NULL;
 			vma = NULL;
+		}
 
-		fence_update(reg, vma);
+		fence_write(reg, vma);
+		reg->vma = vma;
 	}
 }
 

drivers/gpu/drm/i915/i915_pci.c

@@ -431,9 +431,6 @@ static const struct pci_device_id pciidlist[] = {
 };
 MODULE_DEVICE_TABLE(pci, pciidlist);
 
-extern int i915_driver_load(struct pci_dev *pdev,
-			    const struct pci_device_id *ent);
-
 static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct intel_device_info *intel_info =
@@ -463,8 +460,6 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	return i915_driver_load(pdev, ent);
 }
 
-extern void i915_driver_unload(struct drm_device *dev);
-
 static void i915_pci_remove(struct pci_dev *pdev)
 {
 	struct drm_device *dev = pci_get_drvdata(pdev);
@@ -473,8 +468,6 @@ static void i915_pci_remove(struct pci_dev *pdev)
 	drm_dev_unref(dev);
 }
 
-extern const struct dev_pm_ops i915_pm_ops;
-
 static struct pci_driver i915_pci_driver = {
 	.name = DRIVER_NAME,
 	.id_table = pciidlist,

drivers/gpu/drm/i915/intel_bios.c

@@ -1031,6 +1031,77 @@ static u8 translate_iboost(u8 val)
 	return mapping[val];
 }
 
+static void sanitize_ddc_pin(struct drm_i915_private *dev_priv,
+			     enum port port)
+{
+	const struct ddi_vbt_port_info *info =
+		&dev_priv->vbt.ddi_port_info[port];
+	enum port p;
+
+	if (!info->alternate_ddc_pin)
+		return;
+
+	for_each_port_masked(p, (1 << port) - 1) {
+		struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p];
+
+		if (info->alternate_ddc_pin != i->alternate_ddc_pin)
+			continue;
+
+		DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, "
+			      "disabling port %c DVI/HDMI support\n",
+			      port_name(p), i->alternate_ddc_pin,
+			      port_name(port), port_name(p));
+
+		/*
+		 * If we have multiple ports supposedly sharing the
+		 * pin, then dvi/hdmi couldn't exist on the shared
+		 * port. Otherwise they share the same ddc bin and
+		 * system couldn't communicate with them separately.
+		 *
+		 * Due to parsing the ports in alphabetical order,
+		 * a higher port will always clobber a lower one.
+		 */
+		i->supports_dvi = false;
+		i->supports_hdmi = false;
+		i->alternate_ddc_pin = 0;
+	}
+}
+
+static void sanitize_aux_ch(struct drm_i915_private *dev_priv,
+			    enum port port)
+{
+	const struct ddi_vbt_port_info *info =
+		&dev_priv->vbt.ddi_port_info[port];
+	enum port p;
+
+	if (!info->alternate_aux_channel)
+		return;
+
+	for_each_port_masked(p, (1 << port) - 1) {
+		struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p];
+
+		if (info->alternate_aux_channel != i->alternate_aux_channel)
+			continue;
+
+		DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, "
+			      "disabling port %c DP support\n",
+			      port_name(p), i->alternate_aux_channel,
+			      port_name(port), port_name(p));
+
+		/*
+		 * If we have multiple ports supposedlt sharing the
+		 * aux channel, then DP couldn't exist on the shared
+		 * port. Otherwise they share the same aux channel
+		 * and system couldn't communicate with them separately.
+		 *
+		 * Due to parsing the ports in alphabetical order,
+		 * a higher port will always clobber a lower one.
+		 */
+		i->supports_dp = false;
+		i->alternate_aux_channel = 0;
+	}
+}
+
 static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 			   const struct bdb_header *bdb)
 {
@@ -1105,54 +1176,15 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port,
 		DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port));
 
 	if (is_dvi) {
-		if (port == PORT_E) {
 		info->alternate_ddc_pin = ddc_pin;
-			/* if DDIE share ddc pin with other port, then
-			 * dvi/hdmi couldn't exist on the shared port.
-			 * Otherwise they share the same ddc bin and system
-			 * couldn't communicate with them seperately. */
-			if (ddc_pin == DDC_PIN_B) {
-				dev_priv->vbt.ddi_port_info[PORT_B].supports_dvi = 0;
-				dev_priv->vbt.ddi_port_info[PORT_B].supports_hdmi = 0;
-			} else if (ddc_pin == DDC_PIN_C) {
-				dev_priv->vbt.ddi_port_info[PORT_C].supports_dvi = 0;
-				dev_priv->vbt.ddi_port_info[PORT_C].supports_hdmi = 0;
-			} else if (ddc_pin == DDC_PIN_D) {
-				dev_priv->vbt.ddi_port_info[PORT_D].supports_dvi = 0;
-				dev_priv->vbt.ddi_port_info[PORT_D].supports_hdmi = 0;
-			}
-		} else if (ddc_pin == DDC_PIN_B && port != PORT_B)
-			DRM_DEBUG_KMS("Unexpected DDC pin for port B\n");
-		else if (ddc_pin == DDC_PIN_C && port != PORT_C)
-			DRM_DEBUG_KMS("Unexpected DDC pin for port C\n");
-		else if (ddc_pin == DDC_PIN_D && port != PORT_D)
-			DRM_DEBUG_KMS("Unexpected DDC pin for port D\n");
+
+		sanitize_ddc_pin(dev_priv, port);
 	}
 
 	if (is_dp) {
-		if (port == PORT_E) {
 		info->alternate_aux_channel = aux_channel;
-			/* if DDIE share aux channel with other port, then
-			 * DP couldn't exist on the shared port. Otherwise
-			 * they share the same aux channel and system
-			 * couldn't communicate with them seperately. */
-			if (aux_channel == DP_AUX_A)
-				dev_priv->vbt.ddi_port_info[PORT_A].supports_dp = 0;
-			else if (aux_channel == DP_AUX_B)
-				dev_priv->vbt.ddi_port_info[PORT_B].supports_dp = 0;
-			else if (aux_channel == DP_AUX_C)
-				dev_priv->vbt.ddi_port_info[PORT_C].supports_dp = 0;
-			else if (aux_channel == DP_AUX_D)
-				dev_priv->vbt.ddi_port_info[PORT_D].supports_dp = 0;
-		}
-		else if (aux_channel == DP_AUX_A && port != PORT_A)
-			DRM_DEBUG_KMS("Unexpected AUX channel for port A\n");
-		else if (aux_channel == DP_AUX_B && port != PORT_B)
-			DRM_DEBUG_KMS("Unexpected AUX channel for port B\n");
-		else if (aux_channel == DP_AUX_C && port != PORT_C)
-			DRM_DEBUG_KMS("Unexpected AUX channel for port C\n");
-		else if (aux_channel == DP_AUX_D && port != PORT_D)
-			DRM_DEBUG_KMS("Unexpected AUX channel for port D\n");
+
+		sanitize_aux_ch(dev_priv, port);
 	}
 
 	if (bdb->version >= 158) {

drivers/gpu/drm/i915/intel_device_info.c

@@ -192,7 +192,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv)
 	struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu;
 	const int s_max = 3, ss_max = 3, eu_max = 8;
 	int s, ss;
-	u32 fuse2, eu_disable[s_max];
+	u32 fuse2, eu_disable[3]; /* s_max */
 
 	fuse2 = I915_READ(GEN8_FUSE2);
 	sseu->slice_mask = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT;

drivers/gpu/drm/i915/intel_display.c

@@ -2978,7 +2978,8 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state)
 	/* Rotate src coordinates to match rotated GTT view */
 	if (intel_rotation_90_or_270(rotation))
 		drm_rect_rotate(&plane_state->base.src,
-				fb->width, fb->height, DRM_ROTATE_270);
+				fb->width << 16, fb->height << 16,
+				DRM_ROTATE_270);
 
 	/*
 	 * Handle the AUX surface first since
@@ -14310,7 +14311,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 
 	for_each_plane_in_state(state, plane, plane_state, i) {
 		struct intel_plane_state *intel_plane_state =
-			to_intel_plane_state(plane_state);
+			to_intel_plane_state(plane->state);
 
 		if (!intel_plane_state->wait_req)
 			continue;

drivers/gpu/drm/i915/intel_dp.c

@@ -1108,6 +1108,44 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
 	return ret;
 }
 
+static enum port intel_aux_port(struct drm_i915_private *dev_priv,
+				enum port port)
+{
+	const struct ddi_vbt_port_info *info =
+		&dev_priv->vbt.ddi_port_info[port];
+	enum port aux_port;
+
+	if (!info->alternate_aux_channel) {
+		DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n",
+			      port_name(port), port_name(port));
+		return port;
+	}
+
+	switch (info->alternate_aux_channel) {
+	case DP_AUX_A:
+		aux_port = PORT_A;
+		break;
+	case DP_AUX_B:
+		aux_port = PORT_B;
+		break;
+	case DP_AUX_C:
+		aux_port = PORT_C;
+		break;
+	case DP_AUX_D:
+		aux_port = PORT_D;
+		break;
+	default:
+		MISSING_CASE(info->alternate_aux_channel);
+		aux_port = PORT_A;
+		break;
+	}
+
+	DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n",
+		      port_name(aux_port), port_name(port));
+
+	return aux_port;
+}
+
 static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv,
 				       enum port port)
 {
@@ -1168,36 +1206,9 @@ static i915_reg_t ilk_aux_data_reg(struct drm_i915_private *dev_priv,
 	}
 }
 
-/*
- * On SKL we don't have Aux for port E so we rely
- * on VBT to set a proper alternate aux channel.
- */
-static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv)
-{
-	const struct ddi_vbt_port_info *info =
-		&dev_priv->vbt.ddi_port_info[PORT_E];
-
-	switch (info->alternate_aux_channel) {
-	case DP_AUX_A:
-		return PORT_A;
-	case DP_AUX_B:
-		return PORT_B;
-	case DP_AUX_C:
-		return PORT_C;
-	case DP_AUX_D:
-		return PORT_D;
-	default:
-		MISSING_CASE(info->alternate_aux_channel);
-		return PORT_A;
-	}
-}
-
 static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 				       enum port port)
 {
-	if (port == PORT_E)
-		port = skl_porte_aux_port(dev_priv);
-
 	switch (port) {
 	case PORT_A:
 	case PORT_B:
@@ -1213,9 +1224,6 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv,
 static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv,
 					enum port port, int index)
 {
-	if (port == PORT_E)
-		port = skl_porte_aux_port(dev_priv);
-
 	switch (port) {
 	case PORT_A:
 	case PORT_B:
@@ -1253,7 +1261,8 @@ static i915_reg_t intel_aux_data_reg(struct drm_i915_private *dev_priv,
 static void intel_aux_reg_init(struct intel_dp *intel_dp)
 {
 	struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp));
-	enum port port = dp_to_dig_port(intel_dp)->port;
+	enum port port = intel_aux_port(dev_priv,
+					dp_to_dig_port(intel_dp)->port);
 	int i;
 
 	intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port);
@@ -3551,8 +3560,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp)
 	/* Read the eDP Display control capabilities registers */
 	if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) &&
 	    drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV,
-			     intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) ==
-			     sizeof(intel_dp->edp_dpcd)))
+			     intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) ==
+			     sizeof(intel_dp->edp_dpcd))
 		DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd),
 			      intel_dp->edp_dpcd);
 

drivers/gpu/drm/i915/intel_fbc.c

@@ -104,8 +104,10 @@ static int intel_fbc_calculate_cfb_size(struct drm_i915_private *dev_priv,
 	int lines;
 
 	intel_fbc_get_plane_source_size(cache, NULL, &lines);
-	if (INTEL_INFO(dev_priv)->gen >= 7)
+	if (INTEL_GEN(dev_priv) == 7)
 		lines = min(lines, 2048);
+	else if (INTEL_GEN(dev_priv) >= 8)
+		lines = min(lines, 2560);
 
 	/* Hardware needs the full buffer stride, not just the active area. */
 	return lines * cache->fb.stride;

drivers/gpu/drm/i915/intel_pm.c

@@ -3362,13 +3362,15 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 	int num_active;
 	int id, i;
 
+	/* Clear the partitioning for disabled planes. */
+	memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
+	memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe]));
+
 	if (WARN_ON(!state))
 		return 0;
 
 	if (!cstate->base.active) {
 		ddb->pipe[pipe].start = ddb->pipe[pipe].end = 0;
-		memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe]));
-		memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe]));
 		return 0;
 	}
 
@@ -3468,12 +3470,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate,
 	return 0;
 }
 
-static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config)
-{
-	/* TODO: Take into account the scalers once we support them */
-	return config->base.adjusted_mode.crtc_clock;
-}
-
 /*
  * The max latency should be 257 (max the punit can code is 255 and we add 2us
  * for the read latency) and cpp should always be <= 8, so that
@@ -3524,7 +3520,7 @@ static uint32_t skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cst
 	 * Adjusted plane pixel rate is just the pipe's adjusted pixel rate
 	 * with additional adjustments for plane-specific scaling.
 	 */
-	adjusted_pixel_rate = skl_pipe_pixel_rate(cstate);
+	adjusted_pixel_rate = ilk_pipe_pixel_rate(cstate);
 	downscale_amount = skl_plane_downscale_amount(pstate);
 
 	pixel_rate = adjusted_pixel_rate * downscale_amount >> 16;
@@ -3736,11 +3732,11 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate)
 	if (!cstate->base.active)
 		return 0;
 
-	if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0))
+	if (WARN_ON(ilk_pipe_pixel_rate(cstate) == 0))
 		return 0;
 
 	return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000,
-			    skl_pipe_pixel_rate(cstate));
+			    ilk_pipe_pixel_rate(cstate));
 }
 
 static void skl_compute_transition_wm(struct intel_crtc_state *cstate,
@@ -4050,6 +4046,12 @@ skl_compute_ddb(struct drm_atomic_state *state)
 		intel_state->wm_results.dirty_pipes = ~0;
 	}
 
+	/*
+	 * We're not recomputing for the pipes not included in the commit, so
+	 * make sure we start with the current state.
+	 */
+	memcpy(ddb, &dev_priv->wm.skl_hw.ddb, sizeof(*ddb));
+
 	for_each_intel_crtc_mask(dev, intel_crtc, realloc_pipes) {
 		struct intel_crtc_state *cstate;