Skip to content

L
linux
Commit 7ec48ced authored by Corentin Chary's avatar Corentin Chary Committed by Matthew Garrett
Browse files
Options

platform/x86: drop deprecated asus_acpi driver 

asus_acpi only support old models, it has been deprecated since
2009 in favor of asus-laptop, it's not built by any (sane) distro,
so it is time to say good bye.

Thanks to Julien Lerouge and Karol Kozimor for the work they have
done on it, I would never have wrote asus-laptop and other asus
related drivers without asus_acpi.
Signed-off-by: default avatarCorentin Chary <corentin.chary@gmail.com>
Signed-off-by: default avatarMatthew Garrett <mjg@redhat.com>
parent 26594dd4
Hide whitespace changes
Inline Side-by-side
Showing with 6 additions and 1555 deletions
Documentation/laptops/asus-laptop.txt
View file @ 7ec48ced
......@@ -45,7 +45,7 @@ Status
Usage
-----
Try "modprobe asus_acpi". Check your dmesg (simply type dmesg). You should
Try "modprobe asus-laptop". Check your dmesg (simply type dmesg). You should
see some lines like this :
Asus Laptop Extras version 0.42
......
drivers/acpi/video_detect.c
View file @ 7ec48ced
......@@ -23,7 +23,7 @@
* Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
* are available, video.ko should be used to handle the device.
*
* Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
* Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop,
* sony_acpi,... can take care about backlight brightness.
*
* If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
......
drivers/platform/x86/Kconfig
View file @ 7ec48ced
......@@ -54,7 +54,6 @@ config ACERHDF
config ASUS_LAPTOP
tristate "Asus Laptop Extras"
depends on ACPI
depends on !ACPI_ASUS
select LEDS_CLASS
select NEW_LEDS
select BACKLIGHT_CLASS_DEVICE
......@@ -460,10 +459,9 @@ config INTEL_MENLOW
If unsure, say N.
config EEEPC_LAPTOP
tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
tristate "Eee PC Hotkey Driver"
depends on ACPI
depends on INPUT
depends on EXPERIMENTAL
depends on RFKILL || RFKILL = n
depends on HOTPLUG_PCI
select BACKLIGHT_CLASS_DEVICE
......@@ -482,11 +480,10 @@ config EEEPC_LAPTOP
doesn't work on your Eee PC, try eeepc-wmi instead.
config ASUS_WMI
tristate "ASUS WMI Driver (EXPERIMENTAL)"
tristate "ASUS WMI Driver"
depends on ACPI_WMI
depends on INPUT
depends on HWMON
depends on EXPERIMENTAL
depends on BACKLIGHT_CLASS_DEVICE
depends on RFKILL || RFKILL = n
depends on HOTPLUG_PCI
......@@ -501,7 +498,7 @@ config ASUS_WMI
be called asus-wmi.
config ASUS_NB_WMI
tristate "Asus Notebook WMI Driver (EXPERIMENTAL)"
tristate "Asus Notebook WMI Driver"
depends on ASUS_WMI
---help---
This is a driver for newer Asus notebooks. It adds extra features
......@@ -514,7 +511,7 @@ config ASUS_NB_WMI
here.
config EEEPC_WMI
tristate "Eee PC WMI Driver (EXPERIMENTAL)"
tristate "Eee PC WMI Driver"
depends on ASUS_WMI
---help---
This is a driver for newer Eee PC laptops. It adds extra features
......@@ -559,38 +556,6 @@ config MSI_WMI
To compile this driver as a module, choose M here: the module will
be called msi-wmi.
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras (DEPRECATED)"
depends on ACPI
select BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for extra features of ACPI-compatible
ASUS laptops. As some of Medion laptops are made by ASUS, it may also
support some Medion laptops (such as 9675 for example). It makes all
the extra buttons generate standard ACPI events that go through
/proc/acpi/events, and (on some models) adds support for changing the
display brightness and output, switching the LCD backlight on and off,
and most importantly, allows you to blink those fancy LEDs intended
for reporting mail and wireless status.
Note: display switching code is currently considered EXPERIMENTAL,
toying with these values may even lock your machine.
All settings are changed via /proc/acpi/asus directory entries. Owner
and group for these entries can be set with asus_uid and asus_gid
parameters.
More information and a userspace daemon for handling the extra buttons
at <http://acpi4asus.sf.net>.
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
something works not quite as expected, please use the mailing list
available on the above page (acpi4asus-user@lists.sourceforge.net).
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
config TOPSTAR_LAPTOP
tristate "Topstar Laptop Extras"
depends on ACPI
......
drivers/platform/x86/Makefile
View file @ 7ec48ced
......@@ -29,7 +29,6 @@ obj-$(CONFIG_PANASONIC_LAPTOP) += panasonic-laptop.o
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
obj-$(CONFIG_ACPI_WMI) += wmi.o
obj-$(CONFIG_MSI_WMI) += msi-wmi.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_TOPSTAR_LAPTOP) += topstar-laptop.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_TOSHIBA_BT_RFKILL) += toshiba_bluetooth.o
......
drivers/platform/x86/asus_acpi.c deleted 100644 → 0
View file @ 26594dd4
/*
* asus_acpi.c - Asus Laptop ACPI Extras
*
*
* Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* The development page for this driver is located at
* http://sourceforge.net/projects/acpi4asus/
*
* Credits:
* Pontus Fuchs - Helper functions, cleanup
* Johann Wiesner - Small compile fixes
* John Belmonte - ACPI code for Toshiba laptop was a good starting point.
* �ic Burghard - LED display support for W1N
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/backlight.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acpi_bus.h>
#include <asm/uaccess.h>
#define ASUS_ACPI_VERSION "0.30"
#define PROC_ASUS "asus" /* The directory */
#define PROC_MLED "mled"
#define PROC_WLED "wled"
#define PROC_TLED "tled"
#define PROC_BT "bluetooth"
#define PROC_LEDD "ledd"
#define PROC_INFO "info"
#define PROC_LCD "lcd"
#define PROC_BRN "brn"
#define PROC_DISP "disp"
#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver"
#define ACPI_HOTK_CLASS "hotkey"
#define ACPI_HOTK_DEVICE_NAME "Hotkey"
/*
* Some events we use, same for all Asus
*/
#define BR_UP 0x10
#define BR_DOWN 0x20
/*
* Flags for hotk status
*/
#define MLED_ON 0x01 /* Mail LED */
#define WLED_ON 0x02 /* Wireless LED */
#define TLED_ON 0x04 /* Touchpad LED */
#define BT_ON 0x08 /* Internal Bluetooth */
MODULE_AUTHOR("Julien Lerouge, Karol Kozimor");
MODULE_DESCRIPTION(ACPI_HOTK_NAME);
MODULE_LICENSE("GPL");
static uid_t asus_uid;
static gid_t asus_gid;
module_param(asus_uid, uint, 0);
MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus");
module_param(asus_gid, uint, 0);
MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
/* For each model, all features implemented,
* those marked with R are relative to HOTK, A for absolute */
struct model_data {
char *name; /* name of the laptop________________A */
char *mt_mled; /* method to handle mled_____________R */
char *mled_status; /* node to handle mled reading_______A */
char *mt_wled; /* method to handle wled_____________R */
char *wled_status; /* node to handle wled reading_______A */
char *mt_tled; /* method to handle tled_____________R */
char *tled_status; /* node to handle tled reading_______A */
char *mt_ledd; /* method to handle LED display______R */
char *mt_bt_switch; /* method to switch Bluetooth on/off_R */
char *bt_status; /* no model currently supports this__? */
char *mt_lcd_switch; /* method to turn LCD on/off_________A */
char *lcd_status; /* node to read LCD panel state______A */
char *brightness_up; /* method to set brightness up_______A */
char *brightness_down; /* method to set brightness down ____A */
char *brightness_set; /* method to set absolute brightness_R */
char *brightness_get; /* method to get absolute brightness_R */
char *brightness_status;/* node to get brightness____________A */
char *display_set; /* method to set video output________R */
char *display_get; /* method to get video output________R */
};
/*
* This is the main structure, we can use it to store anything interesting
* about the hotk device
*/
struct asus_hotk {
struct acpi_device *device; /* the device we are in */
acpi_handle handle; /* the handle of the hotk device */
char status; /* status of the hotk, for LEDs */
u32 ledd_status; /* status of the LED display */
struct model_data *methods; /* methods available on the laptop */
u8 brightness; /* brightness level */
enum {
A1x = 0, /* A1340D, A1300F */
A2x, /* A2500H */
A4G, /* A4700G */
D1x, /* D1 */
L2D, /* L2000D */
L3C, /* L3800C */
L3D, /* L3400D */
L3H, /* L3H, L2000E, L5D */
L4R, /* L4500R */
L5x, /* L5800C */
L8L, /* L8400L */
M1A, /* M1300A */
M2E, /* M2400E, L4400L */
M6N, /* M6800N, W3400N */
M6R, /* M6700R, A3000G */
P30, /* Samsung P30 */
S1x, /* S1300A, but also L1400B and M2400A (L84F) */
S2x, /* S200 (J1 reported), Victor MP-XP7210 */
W1N, /* W1000N */
W5A, /* W5A */
W3V, /* W3030V */
xxN, /* M2400N, M3700N, M5200N, M6800N,
S1300N, S5200N*/
A4S, /* Z81sp */
F3Sa, /* (Centrino) */
R1F,
END_MODEL
} model; /* Models currently supported */
u16 event_count[128]; /* Count for each event TODO make this better */
};
/* Here we go */
#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0."
#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0."
#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0."
#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0."
#define S1x_PREFIX "\\_SB.PCI0.PX40."
#define S2x_PREFIX A1x_PREFIX
#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0."
static struct model_data model_conf[END_MODEL] = {
/*
* TODO I have seen a SWBX and AIBX method on some models, like L1400B,
* it seems to be a kind of switch, but what for ?
*/
{
.name = "A1x",
.mt_mled = "MLED",
.mled_status = "\\MAIL",
.mt_lcd_switch = A1x_PREFIX "_Q10",
.lcd_status = "\\BKLI",
.brightness_up = A1x_PREFIX "_Q0E",
.brightness_down = A1x_PREFIX "_Q0F"},
{
.name = "A2x",
.mt_mled = "MLED",
.mt_wled = "WLED",
.wled_status = "\\SG66",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\BAOF",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "A4G",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.mt_lcd_switch = xxN_PREFIX "_Q10",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "D1x",
.mt_mled = "MLED",
.mt_lcd_switch = "\\Q0D",
.lcd_status = "\\GP11",
.brightness_up = "\\Q0C",
.brightness_down = "\\Q0B",
.brightness_status = "\\BLVL",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L2D",
.mt_mled = "MLED",
.mled_status = "\\SGP6",
.mt_wled = "WLED",
.wled_status = "\\RCP3",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\SGP0",
.brightness_up = "\\Q0E",
.brightness_down = "\\Q0F",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L3C",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = L3C_PREFIX "_Q10",
.lcd_status = "\\GL32",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"},
{
.name = "L3D",
.mt_mled = "MLED",
.mled_status = "\\MALD",
.mt_wled = "WLED",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\BKLG",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L3H",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = "EHK",
.lcd_status = "\\_SB.PCI0.PM.PBC",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L4R",
.mt_mled = "MLED",
.mt_wled = "WLED",
.wled_status = "\\_SB.PCI0.SBRG.SG13",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\_SB.PCI0.SBSM.SEO4",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
.name = "L5x",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.mt_tled = "TLED",
.mt_lcd_switch = "\\Q0D",
.lcd_status = "\\BAOF",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "L8L"
/* No features, but at least support the hotkeys */
},
{
.name = "M1A",
.mt_mled = "MLED",
.mt_lcd_switch = M1A_PREFIX "Q10",
.lcd_status = "\\PNOF",
.brightness_up = M1A_PREFIX "Q0E",
.brightness_down = M1A_PREFIX "Q0F",
.brightness_status = "\\BRIT",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "M2E",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\GP06",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "M6N",
.mt_mled = "MLED",
.mt_wled = "WLED",
.wled_status = "\\_SB.PCI0.SBRG.SG13",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\_SB.BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\SSTE"},
{
.name = "M6R",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\_SB.PCI0.SBSM.SEO4",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
{
.name = "P30",
.mt_wled = "WLED",
.mt_lcd_switch = P30_PREFIX "_Q0E",
.lcd_status = "\\BKLT",
.brightness_up = P30_PREFIX "_Q68",
.brightness_down = P30_PREFIX "_Q69",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\DNXT"},
{
.name = "S1x",
.mt_mled = "MLED",
.mled_status = "\\EMLE",
.mt_wled = "WLED",
.mt_lcd_switch = S1x_PREFIX "Q10",
.lcd_status = "\\PNOF",
.brightness_set = "SPLV",
.brightness_get = "GPLV"},
{
.name = "S2x",
.mt_mled = "MLED",
.mled_status = "\\MAIL",
.mt_lcd_switch = S2x_PREFIX "_Q10",
.lcd_status = "\\BKLI",
.brightness_up = S2x_PREFIX "_Q0B",
.brightness_down = S2x_PREFIX "_Q0A"},
{
.name = "W1N",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_ledd = "SLCM",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "W5A",
.mt_bt_switch = "BLED",
.mt_wled = "WLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "W3V",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"},
{
.name = "xxN",
.mt_mled = "MLED",
/* WLED present, but not controlled by ACPI */
.mt_lcd_switch = xxN_PREFIX "_Q10",
.lcd_status = "\\BKLT",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\ADVG"},
{
.name = "A4S",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.mt_bt_switch = "BLED",
.mt_wled = "WLED"
},
{
.name = "F3Sa",
.mt_bt_switch = "BLED",
.mt_wled = "WLED",
.mt_mled = "MLED",
.brightness_get = "GPLV",
.brightness_set = "SPLV",
.mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10",
.lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN",
.display_get = "\\ADVG",
.display_set = "SDSP",
},
{
.name = "R1F",
.mt_bt_switch = "BLED",
.mt_mled = "MLED",
.mt_wled = "WLED",
.mt_lcd_switch = "\\Q10",
.lcd_status = "\\GP06",
.brightness_set = "SPLV",
.brightness_get = "GPLV",
.display_set = "SDSP",
.display_get = "\\INFB"
}
};
/* procdir we use */
static struct proc_dir_entry *asus_proc_dir;
static struct backlight_device *asus_backlight_device;
/*
* This header is made available to allow proper configuration given model,
* revision number , ... this info cannot go in struct asus_hotk because it is
* available before the hotk
*/
static struct acpi_table_header *asus_info;
/* The actual device the driver binds to */
static struct asus_hotk *hotk;
/*
* The hotkey driver and autoloading declaration
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static void asus_hotk_notify(struct acpi_device *device, u32 event);
static const struct acpi_device_id asus_device_ids[] = {
{"ATK0100", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, asus_device_ids);
static struct acpi_driver asus_hotk_driver = {
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.owner = THIS_MODULE,
.ids = asus_device_ids,
.flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
.notify = asus_hotk_notify,
},
};
/*
* This function evaluates an ACPI method, given an int as parameter, the
* method is searched within the scope of the handle, can be NULL. The output
* of the method is written is output, which can also be NULL
*
* returns 1 if write is successful, 0 else.
*/
static int write_acpi_int(acpi_handle handle, const char *method, int val,
struct acpi_buffer *output)
{
struct acpi_object_list params; /* list of input parameters (int) */
union acpi_object in_obj; /* the only param we use */
acpi_status status;
params.count = 1;
params.pointer = &in_obj;
in_obj.type = ACPI_TYPE_INTEGER;
in_obj.integer.value = val;
status = acpi_evaluate_object(handle, (char *)method, &params, output);
return (status == AE_OK);
}
static int read_acpi_int(acpi_handle handle, const char *method, int *val)
{
struct acpi_buffer output;
union acpi_object out_obj;
acpi_status status;
output.length = sizeof(out_obj);
output.pointer = &out_obj;
status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
*val = out_obj.integer.value;
return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
}
static int asus_info_proc_show(struct seq_file *m, void *v)
{
int temp;
seq_printf(m, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
seq_printf(m, "Model reference : %s\n", hotk->methods->name);
/*
* The SFUN method probably allows the original driver to get the list
* of features supported by a given model. For now, 0x0100 or 0x0800
* bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
* The significance of others is yet to be found.
*/
if (read_acpi_int(hotk->handle, "SFUN", &temp))
seq_printf(m, "SFUN value : 0x%04x\n", temp);
/*
* Another value for userspace: the ASYM method returns 0x02 for
* battery low and 0x04 for battery critical, its readings tend to be
* more accurate than those provided by _BST.
* Note: since not all the laptops provide this method, errors are
* silently ignored.
*/
if (read_acpi_int(hotk->handle, "ASYM", &temp))
seq_printf(m, "ASYM value : 0x%04x\n", temp);
if (asus_info) {
seq_printf(m, "DSDT length : %d\n", asus_info->length);
seq_printf(m, "DSDT checksum : %d\n", asus_info->checksum);
seq_printf(m, "DSDT revision : %d\n", asus_info->revision);
seq_printf(m, "OEM id : %.*s\n", ACPI_OEM_ID_SIZE, asus_info->oem_id);
seq_printf(m, "OEM table id : %.*s\n", ACPI_OEM_TABLE_ID_SIZE, asus_info->oem_table_id);
seq_printf(m, "OEM revision : 0x%x\n", asus_info->oem_revision);
seq_printf(m, "ASL comp vendor id : %.*s\n", ACPI_NAME_SIZE, asus_info->asl_compiler_id);
seq_printf(m, "ASL comp revision : 0x%x\n", asus_info->asl_compiler_revision);
}
return 0;
}
static int asus_info_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, asus_info_proc_show, NULL);
}
static const struct file_operations asus_info_proc_fops = {
.owner = THIS_MODULE,
.open = asus_info_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/*
* /proc handlers
* We write our info in page, we begin at offset off and cannot write more
* than count bytes. We set eof to 1 if we handle those 2 values. We return the
* number of bytes written in page
*/
/* Generic LED functions */
static int read_led(const char *ledname, int ledmask)
{
if (ledname) {
int led_status;
if (read_acpi_int(NULL, ledname, &led_status))
return led_status;
else
pr_warn("Error reading LED status\n");
}
return (hotk->status & ledmask) ? 1 : 0;
}
static int parse_arg(const char __user *buf, unsigned long count, int *val)
{
char s[32];
if (!count)
return 0;
if (count > 31)
return -EINVAL;
if (copy_from_user(s, buf, count))
return -EFAULT;
s[count] = 0;
if (sscanf(s, "%i", val) != 1)
return -EINVAL;
return count;
}
/* FIXME: kill extraneous args so it can be called independently */
static int
write_led(const char __user *buffer, unsigned long count,
char *ledname, int ledmask, int invert)
{
int rv, value;
int led_out = 0;
rv = parse_arg(buffer, count, &value);
if (rv > 0)
led_out = value ? 1 : 0;
hotk->status =
(led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
if (invert) /* invert target value */
led_out = !led_out;
if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
pr_warn("LED (%s) write failed\n", ledname);
return rv;
}
/*
* Proc handlers for MLED
*/
static int mled_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%d\n", read_led(hotk->methods->mled_status, MLED_ON));
return 0;
}
static int mled_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, mled_proc_show, NULL);
}
static ssize_t mled_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1);
}
static const struct file_operations mled_proc_fops = {
.owner = THIS_MODULE,
.open = mled_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = mled_proc_write,
};
/*
* Proc handlers for LED display
*/
static int ledd_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "0x%08x\n", hotk->ledd_status);
return 0;
}
static int ledd_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, ledd_proc_show, NULL);
}
static ssize_t ledd_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0) {
if (!write_acpi_int
(hotk->handle, hotk->methods->mt_ledd, value, NULL))
pr_warn("LED display write failed\n");
else
hotk->ledd_status = (u32) value;
}
return rv;
}
static const struct file_operations ledd_proc_fops = {
.owner = THIS_MODULE,
.open = ledd_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = ledd_proc_write,
};
/*
* Proc handlers for WLED
*/
static int wled_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%d\n", read_led(hotk->methods->wled_status, WLED_ON));
return 0;
}
static int wled_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, wled_proc_show, NULL);
}
static ssize_t wled_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0);
}
static const struct file_operations wled_proc_fops = {
.owner = THIS_MODULE,
.open = wled_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = wled_proc_write,
};
/*
* Proc handlers for Bluetooth
*/
static int bluetooth_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%d\n", read_led(hotk->methods->bt_status, BT_ON));
return 0;
}
static int bluetooth_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, bluetooth_proc_show, NULL);
}
static ssize_t bluetooth_proc_write(struct file *file,
const char __user *buffer, size_t count, loff_t *pos)
{
/* Note: mt_bt_switch controls both internal Bluetooth adapter's
presence and its LED */
return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0);
}
static const struct file_operations bluetooth_proc_fops = {
.owner = THIS_MODULE,
.open = bluetooth_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = bluetooth_proc_write,
};
/*
* Proc handlers for TLED
*/
static int tled_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%d\n", read_led(hotk->methods->tled_status, TLED_ON));
return 0;
}
static int tled_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, tled_proc_show, NULL);
}
static ssize_t tled_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0);
}
static const struct file_operations tled_proc_fops = {
.owner = THIS_MODULE,
.open = tled_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = tled_proc_write,
};
static int get_lcd_state(void)
{
int lcd = 0;
if (hotk->model == L3H) {
/* L3H and the like have to be handled differently */
acpi_status status = 0;
struct acpi_object_list input;
union acpi_object mt_params[2];
struct acpi_buffer output;
union acpi_object out_obj;
input.count = 2;
input.pointer = mt_params;
/* Note: the following values are partly guessed up, but
otherwise they seem to work */
mt_params[0].type = ACPI_TYPE_INTEGER;
mt_params[0].integer.value = 0x02;
mt_params[1].type = ACPI_TYPE_INTEGER;
mt_params[1].integer.value = 0x02;
output.length = sizeof(out_obj);
output.pointer = &out_obj;
status =
acpi_evaluate_object(NULL, hotk->methods->lcd_status,
&input, &output);
if (status != AE_OK)
return -1;
if (out_obj.type == ACPI_TYPE_INTEGER)
/* That's what the AML code does */
lcd = out_obj.integer.value >> 8;
} else if (hotk->model == F3Sa) {
unsigned long long tmp;
union acpi_object param;
struct acpi_object_list input;
acpi_status status;
/* Read pin 11 */
param.type = ACPI_TYPE_INTEGER;
param.integer.value = 0x11;
input.count = 1;
input.pointer = &param;
status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status,
&input, &tmp);
if (status != AE_OK)
return -1;
lcd = tmp;
} else {
/* We don't have to check anything if we are here */
if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
pr_warn("Error reading LCD status\n");
if (hotk->model == L2D)
lcd = ~lcd;
}
return (lcd & 1);
}
static int set_lcd_state(int value)
{
int lcd = 0;
acpi_status status = 0;
lcd = value ? 1 : 0;
if (lcd != get_lcd_state()) {
/* switch */
if (hotk->model != L3H) {
status =
acpi_evaluate_object(NULL,
hotk->methods->mt_lcd_switch,
NULL, NULL);
} else {
/* L3H and the like must be handled differently */
if (!write_acpi_int
(hotk->handle, hotk->methods->mt_lcd_switch, 0x07,
NULL))
status = AE_ERROR;
/* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
the exact behaviour is simulated here */
}
if (ACPI_FAILURE(status))
pr_warn("Error switching LCD\n");
}
return 0;
}
static int lcd_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%d\n", get_lcd_state());
return 0;
}
static int lcd_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, lcd_proc_show, NULL);
}
static ssize_t lcd_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0)
set_lcd_state(value);
return rv;
}
static const struct file_operations lcd_proc_fops = {
.owner = THIS_MODULE,
.open = lcd_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = lcd_proc_write,
};
static int read_brightness(struct backlight_device *bd)
{
int value;
if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */
if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
&value))
pr_warn("Error reading brightness\n");
} else if (hotk->methods->brightness_status) { /* For D1 for example */
if (!read_acpi_int(NULL, hotk->methods->brightness_status,
&value))
pr_warn("Error reading brightness\n");
} else /* No GPLV method */
value = hotk->brightness;
return value;
}
/*
* Change the brightness level
*/
static int set_brightness(int value)
{
acpi_status status = 0;
int ret = 0;
/* SPLV laptop */
if (hotk->methods->brightness_set) {
if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
value, NULL)) {
pr_warn("Error changing brightness\n");
ret = -EIO;
}
goto out;
}
/* No SPLV method if we are here, act as appropriate */
value -= read_brightness(NULL);
while (value != 0) {
status = acpi_evaluate_object(NULL, (value > 0) ?
hotk->methods->brightness_up :
hotk->methods->brightness_down,
NULL, NULL);
(value > 0) ? value-- : value++;
if (ACPI_FAILURE(status)) {
pr_warn("Error changing brightness\n");
ret = -EIO;
}
}
out:
return ret;
}
static int set_brightness_status(struct backlight_device *bd)
{
return set_brightness(bd->props.brightness);
}
static int brn_proc_show(struct seq_file *m, void *v)
{
seq_printf(m, "%d\n", read_brightness(NULL));
return 0;
}
static int brn_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, brn_proc_show, NULL);
}
static ssize_t brn_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0) {
value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
/* 0 <= value <= 15 */
set_brightness(value);
}
return rv;
}
static const struct file_operations brn_proc_fops = {
.owner = THIS_MODULE,
.open = brn_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = brn_proc_write,
};
static void set_display(int value)
{
/* no sanity check needed for now */
if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
value, NULL))
pr_warn("Error setting display\n");
return;
}
/*
* Now, *this* one could be more user-friendly, but so far, no-one has
* complained. The significance of bits is the same as in proc_write_disp()
*/
static int disp_proc_show(struct seq_file *m, void *v)
{
int value = 0;
if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
pr_warn("Error reading display status\n");
value &= 0x07; /* needed for some models, shouldn't hurt others */
seq_printf(m, "%d\n", value);
return 0;
}
static int disp_proc_open(struct inode *inode, struct file *file)
{
return single_open(file, disp_proc_show, NULL);
}
/*
* Experimental support for display switching. As of now: 1 should activate
* the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
* (bitwise) of these will suffice. I never actually tested 3 displays hooked
* up simultaneously, so be warned. See the acpi4asus README for more info.
*/
static ssize_t disp_proc_write(struct file *file, const char __user *buffer,
size_t count, loff_t *pos)
{
int rv, value;
rv = parse_arg(buffer, count, &value);
if (rv > 0)
set_display(value);
return rv;
}
static const struct file_operations disp_proc_fops = {
.owner = THIS_MODULE,
.open = disp_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
.write = disp_proc_write,
};
static int
asus_proc_add(char *name, const struct file_operations *proc_fops, umode_t mode,
struct acpi_device *device)
{
struct proc_dir_entry *proc;
proc = proc_create_data(name, mode, acpi_device_dir(device),
proc_fops, acpi_driver_data(device));
if (!proc) {
pr_warn(" Unable to create %s fs entry\n", name);
return -1;
}
proc->uid = asus_uid;
proc->gid = asus_gid;
return 0;
}
static int asus_hotk_add_fs(struct acpi_device *device)
{
struct proc_dir_entry *proc;
umode_t mode;
if ((asus_uid == 0) && (asus_gid == 0)) {
mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP;
} else {
mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
pr_warn(" asus_uid and asus_gid parameters are "
"deprecated, use chown and chmod instead!\n");
}
acpi_device_dir(device) = asus_proc_dir;
if (!acpi_device_dir(device))
return -ENODEV;
proc = proc_create(PROC_INFO, mode, acpi_device_dir(device),
&asus_info_proc_fops);
if (proc) {
proc->uid = asus_uid;
proc->gid = asus_gid;
} else {
pr_warn(" Unable to create " PROC_INFO " fs entry\n");
}
if (hotk->methods->mt_wled) {
asus_proc_add(PROC_WLED, &wled_proc_fops, mode, device);
}
if (hotk->methods->mt_ledd) {
asus_proc_add(PROC_LEDD, &ledd_proc_fops, mode, device);
}
if (hotk->methods->mt_mled) {
asus_proc_add(PROC_MLED, &mled_proc_fops, mode, device);
}
if (hotk->methods->mt_tled) {
asus_proc_add(PROC_TLED, &tled_proc_fops, mode, device);
}
if (hotk->methods->mt_bt_switch) {
asus_proc_add(PROC_BT, &bluetooth_proc_fops, mode, device);
}
/*
* We need both read node and write method as LCD switch is also
* accessible from the keyboard
*/
if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
asus_proc_add(PROC_LCD, &lcd_proc_fops, mode, device);
}
if ((hotk->methods->brightness_up && hotk->methods->brightness_down) ||
(hotk->methods->brightness_get && hotk->methods->brightness_set)) {
asus_proc_add(PROC_BRN, &brn_proc_fops, mode, device);
}
if (hotk->methods->display_set) {
asus_proc_add(PROC_DISP, &disp_proc_fops, mode, device);
}
return 0;
}
static int asus_hotk_remove_fs(struct acpi_device *device)
{
if (acpi_device_dir(device)) {
remove_proc_entry(PROC_INFO, acpi_device_dir(device));
if (hotk->methods->mt_wled)
remove_proc_entry(PROC_WLED, acpi_device_dir(device));
if (hotk->methods->mt_mled)
remove_proc_entry(PROC_MLED, acpi_device_dir(device));
if (hotk->methods->mt_tled)
remove_proc_entry(PROC_TLED, acpi_device_dir(device));
if (hotk->methods->mt_ledd)
remove_proc_entry(PROC_LEDD, acpi_device_dir(device));
if (hotk->methods->mt_bt_switch)
remove_proc_entry(PROC_BT, acpi_device_dir(device));
if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status)
remove_proc_entry(PROC_LCD, acpi_device_dir(device));
if ((hotk->methods->brightness_up
&& hotk->methods->brightness_down)
|| (hotk->methods->brightness_get
&& hotk->methods->brightness_set))
remove_proc_entry(PROC_BRN, acpi_device_dir(device));
if (hotk->methods->display_set)
remove_proc_entry(PROC_DISP, acpi_device_dir(device));
}
return 0;
}
static void asus_hotk_notify(struct acpi_device *device, u32 event)
{
/* TODO Find a better way to handle events count. */
if (!hotk)
return;
/*
* The BIOS *should* be sending us device events, but apparently
* Asus uses system events instead, so just ignore any device
* events we get.
*/
if (event > ACPI_MAX_SYS_NOTIFY)
return;
if ((event & ~((u32) BR_UP)) < 16)
hotk->brightness = (event & ~((u32) BR_UP));
else if ((event & ~((u32) BR_DOWN)) < 16)
hotk->brightness = (event & ~((u32) BR_DOWN));
acpi_bus_generate_proc_event(hotk->device, event,
hotk->event_count[event % 128]++);
return;
}
/*
* Match the model string to the list of supported models. Return END_MODEL if
* no match or model is NULL.
*/
static int asus_model_match(char *model)
{
if (model == NULL)
return END_MODEL;
if (strncmp(model, "L3D", 3) == 0)
return L3D;
else if (strncmp(model, "L2E", 3) == 0 ||
strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0)
return L3H;
else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0)
return L3C;
else if (strncmp(model, "L8L", 3) == 0)
return L8L;
else if (strncmp(model, "L4R", 3) == 0)
return L4R;
else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0)
return M6N;
else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0)
return M6R;
else if (strncmp(model, "M2N", 3) == 0 ||
strncmp(model, "M3N", 3) == 0 ||
strncmp(model, "M5N", 3) == 0 ||
strncmp(model, "S1N", 3) == 0 ||
strncmp(model, "S5N", 3) == 0)
return xxN;
else if (strncmp(model, "M1", 2) == 0)
return M1A;
else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0)
return M2E;
else if (strncmp(model, "L2", 2) == 0)
return L2D;
else if (strncmp(model, "L8", 2) == 0)
return S1x;
else if (strncmp(model, "D1", 2) == 0)
return D1x;
else if (strncmp(model, "A1", 2) == 0)
return A1x;
else if (strncmp(model, "A2", 2) == 0)
return A2x;
else if (strncmp(model, "J1", 2) == 0)
return S2x;
else if (strncmp(model, "L5", 2) == 0)
return L5x;
else if (strncmp(model, "A4G", 3) == 0)
return A4G;
else if (strncmp(model, "W1N", 3) == 0)
return W1N;
else if (strncmp(model, "W3V", 3) == 0)
return W3V;
else if (strncmp(model, "W5A", 3) == 0)
return W5A;
else if (strncmp(model, "R1F", 3) == 0)
return R1F;
else if (strncmp(model, "A4S", 3) == 0)
return A4S;
else if (strncmp(model, "F3Sa", 4) == 0)
return F3Sa;
else
return END_MODEL;
}
/*
* This function is used to initialize the hotk with right values. In this
* method, we can make all the detection we want, and modify the hotk struct
*/
static int asus_hotk_get_info(void)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
int bsts_result;
char *string = NULL;
acpi_status status;
/*
* Get DSDT headers early enough to allow for differentiating between
* models, but late enough to allow acpi_bus_register_driver() to fail
* before doing anything ACPI-specific. Should we encounter a machine,
* which needs special handling (i.e. its hotkey device has a different
* HID), this bit will be moved. A global variable asus_info contains
* the DSDT header.
*/
status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
pr_warn(" Couldn't get the DSDT table header\n");
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
pr_err(" Hotkey initialization failed\n");
return -ENODEV;
}
/* This needs to be called for some laptops to init properly */
if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result))
pr_warn(" Error calling BSTS\n");
else if (bsts_result)
pr_notice(" BSTS called, 0x%02x returned\n", bsts_result);
/*
* Try to match the object returned by INIT to the specific model.
* Handle every possible object (or the lack of thereof) the DSDT
* writers might throw at us. When in trouble, we pass NULL to
* asus_model_match() and try something completely different.
*/
if (buffer.pointer) {
model = buffer.pointer;
switch (model->type) {
case ACPI_TYPE_STRING:
string = model->string.pointer;
break;
case ACPI_TYPE_BUFFER:
string = model->buffer.pointer;
break;
default:
kfree(model);
model = NULL;
break;
}
}
hotk->model = asus_model_match(string);
if (hotk->model == END_MODEL) { /* match failed */
if (asus_info &&
strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
hotk->model = P30;
pr_notice(" Samsung P30 detected, supported\n");
hotk->methods = &model_conf[hotk->model];
kfree(model);
return 0;
} else {
hotk->model = M2E;
pr_notice(" unsupported model %s, trying default values\n",
string);
pr_notice(" send /proc/acpi/dsdt to the developers\n");
kfree(model);
return -ENODEV;
}
}
hotk->methods = &model_conf[hotk->model];
pr_notice(" %s model detected, supported\n", string);
/* Sort of per-model blacklist */
if (strncmp(string, "L2B", 3) == 0)
hotk->methods->lcd_status = NULL;
/* L2B is similar enough to L3C to use its settings, with this only
exception */
else if (strncmp(string, "A3G", 3) == 0)
hotk->methods->lcd_status = "\\BLFG";
/* A3G is like M6R */
else if (strncmp(string, "S5N", 3) == 0 ||
strncmp(string, "M5N", 3) == 0 ||
strncmp(string, "W3N", 3) == 0)
hotk->methods->mt_mled = NULL;
/* S5N, M5N and W3N have no MLED */
else if (strncmp(string, "L5D", 3) == 0)
hotk->methods->mt_wled = NULL;
/* L5D's WLED is not controlled by ACPI */
else if (strncmp(string, "M2N", 3) == 0 ||
strncmp(string, "W3V", 3) == 0 ||
strncmp(string, "S1N", 3) == 0)
hotk->methods->mt_wled = "WLED";
/* M2N, S1N and W3V have a usable WLED */
else if (asus_info) {
if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
hotk->methods->mled_status = NULL;
/* S1300A reports L84F, but L1400B too, account for that */
}
kfree(model);
return 0;
}
static int asus_hotk_check(void)
{
int result = 0;
result = acpi_bus_get_status(hotk->device);
if (result)
return result;
if (hotk->device->status.present) {
result = asus_hotk_get_info();
} else {
pr_err(" Hotkey device not present, aborting\n");
return -EINVAL;
}
return result;
}
static int asus_hotk_found;
static int asus_hotk_add(struct acpi_device *device)
{
acpi_status status = AE_OK;
int result;
pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION);
hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
if (!hotk)
return -ENOMEM;
hotk->handle = device->handle;
strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_HOTK_CLASS);
device->driver_data = hotk;
hotk->device = device;
result = asus_hotk_check();
if (result)
goto end;
result = asus_hotk_add_fs(device);
if (result)
goto end;
/* For laptops without GPLV: init the hotk->brightness value */
if ((!hotk->methods->brightness_get)
&& (!hotk->methods->brightness_status)
&& (hotk->methods->brightness_up && hotk->methods->brightness_down)) {
status =
acpi_evaluate_object(NULL, hotk->methods->brightness_down,
NULL, NULL);
if (ACPI_FAILURE(status))
pr_warn(" Error changing brightness\n");
else {
status =
acpi_evaluate_object(NULL,
hotk->methods->brightness_up,
NULL, NULL);
if (ACPI_FAILURE(status))
pr_warn(" Strange, error changing brightness\n");
}
}
asus_hotk_found = 1;
/* LED display is off by default */
hotk->ledd_status = 0xFFF;
end:
if (result)
kfree(hotk);
return result;
}
static int asus_hotk_remove(struct acpi_device *device, int type)
{
asus_hotk_remove_fs(device);
kfree(hotk);
return 0;
}
static const struct backlight_ops asus_backlight_data = {
.get_brightness = read_brightness,
.update_status = set_brightness_status,
};
static void asus_acpi_exit(void)
{
if (asus_backlight_device)
backlight_device_unregister(asus_backlight_device);
acpi_bus_unregister_driver(&asus_hotk_driver);
remove_proc_entry(PROC_ASUS, acpi_root_dir);
return;
}
static int __init asus_acpi_init(void)
{
struct backlight_properties props;
int result;
result = acpi_bus_register_driver(&asus_hotk_driver);
if (result < 0)
return result;
asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
if (!asus_proc_dir) {
pr_err("Unable to create /proc entry\n");
acpi_bus_unregister_driver(&asus_hotk_driver);
return -ENODEV;
}
/*
* This is a bit of a kludge. We only want this module loaded
* for ASUS systems, but there's currently no way to probe the
* ACPI namespace for ASUS HIDs. So we just return failure if
* we didn't find one, which will cause the module to be
* unloaded.
*/
if (!asus_hotk_found) {
acpi_bus_unregister_driver(&asus_hotk_driver);
remove_proc_entry(PROC_ASUS, acpi_root_dir);
return -ENODEV;
}
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = 15;
asus_backlight_device = backlight_device_register("asus", NULL, NULL,
&asus_backlight_data,
&props);
if (IS_ERR(asus_backlight_device)) {
pr_err("Could not register asus backlight device\n");
asus_backlight_device = NULL;
asus_acpi_exit();
return -ENODEV;
}
return 0;
}
module_init(asus_acpi_init);
module_exit(asus_acpi_exit);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7