Commit 7efe5d7c authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6

parents dbe0580d f8977d0a
......@@ -286,7 +286,9 @@ X!Edrivers/pci/search.c
-->
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
!Edrivers/pci/hotplug.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
!Edrivers/pci/rom.c
</sect1>
......
......@@ -2,6 +2,8 @@
* Exceptions for specific devices. Usually work-arounds for fatal design flaws.
*/
#include <linux/delay.h>
#include <linux/dmi.h>
#include <linux/pci.h>
#include <linux/init.h>
#include "pci.h"
......@@ -384,3 +386,60 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
/*
* Some Toshiba laptops need extra code to enable their TI TSB43AB22/A.
*
* We pretend to bring them out of full D3 state, and restore the proper
* IRQ, PCI cache line size, and BARs, otherwise the device won't function
* properly. In some cases, the device will generate an interrupt on
* the wrong IRQ line, causing any devices sharing the the line it's
* *supposed* to use to be disabled by the kernel's IRQ debug code.
*/
static u16 toshiba_line_size;
static struct dmi_system_id __devinit toshiba_ohci1394_dmi_table[] = {
{
.ident = "Toshiba PS5 based laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"),
},
},
{
.ident = "Toshiba PSM4 based laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"),
},
},
{ }
};
static void __devinit pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev)
{
if (!dmi_check_system(toshiba_ohci1394_dmi_table))
return; /* only applies to certain Toshibas (so far) */
dev->current_state = PCI_D3cold;
pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size);
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032,
pci_pre_fixup_toshiba_ohci1394);
static void __devinit pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev)
{
if (!dmi_check_system(toshiba_ohci1394_dmi_table))
return; /* only applies to certain Toshibas (so far) */
/* Restore config space on Toshiba laptops */
mdelay(10);
pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size);
pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq);
pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
pci_resource_start(dev, 0));
pci_write_config_dword(dev, PCI_BASE_ADDRESS_1,
pci_resource_start(dev, 1));
}
DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
pci_post_fixup_toshiba_ohci1394);
......@@ -60,3 +60,92 @@ EXPORT_SYMBOL(pci_bus_read_config_dword);
EXPORT_SYMBOL(pci_bus_write_config_byte);
EXPORT_SYMBOL(pci_bus_write_config_word);
EXPORT_SYMBOL(pci_bus_write_config_dword);
static u32 pci_user_cached_config(struct pci_dev *dev, int pos)
{
u32 data;
data = dev->saved_config_space[pos/sizeof(dev->saved_config_space[0])];
data >>= (pos % sizeof(dev->saved_config_space[0])) * 8;
return data;
}
#define PCI_USER_READ_CONFIG(size,type) \
int pci_user_read_config_##size \
(struct pci_dev *dev, int pos, type *val) \
{ \
unsigned long flags; \
int ret = 0; \
u32 data = -1; \
if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
spin_lock_irqsave(&pci_lock, flags); \
if (likely(!dev->block_ucfg_access)) \
ret = dev->bus->ops->read(dev->bus, dev->devfn, \
pos, sizeof(type), &data); \
else if (pos < sizeof(dev->saved_config_space)) \
data = pci_user_cached_config(dev, pos); \
spin_unlock_irqrestore(&pci_lock, flags); \
*val = (type)data; \
return ret; \
}
#define PCI_USER_WRITE_CONFIG(size,type) \
int pci_user_write_config_##size \
(struct pci_dev *dev, int pos, type val) \
{ \
unsigned long flags; \
int ret = -EIO; \
if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER; \
spin_lock_irqsave(&pci_lock, flags); \
if (likely(!dev->block_ucfg_access)) \
ret = dev->bus->ops->write(dev->bus, dev->devfn, \
pos, sizeof(type), val); \
spin_unlock_irqrestore(&pci_lock, flags); \
return ret; \
}
PCI_USER_READ_CONFIG(byte, u8)
PCI_USER_READ_CONFIG(word, u16)
PCI_USER_READ_CONFIG(dword, u32)
PCI_USER_WRITE_CONFIG(byte, u8)
PCI_USER_WRITE_CONFIG(word, u16)
PCI_USER_WRITE_CONFIG(dword, u32)
/**
* pci_block_user_cfg_access - Block userspace PCI config reads/writes
* @dev: pci device struct
*
* This function blocks any userspace PCI config accesses from occurring.
* When blocked, any writes will be bit bucketed and reads will return the
* data saved using pci_save_state for the first 64 bytes of config
* space and return 0xff for all other config reads.
**/
void pci_block_user_cfg_access(struct pci_dev *dev)
{
unsigned long flags;
pci_save_state(dev);
/* spinlock to synchronize with anyone reading config space now */
spin_lock_irqsave(&pci_lock, flags);
dev->block_ucfg_access = 1;
spin_unlock_irqrestore(&pci_lock, flags);
}
EXPORT_SYMBOL_GPL(pci_block_user_cfg_access);
/**
* pci_unblock_user_cfg_access - Unblock userspace PCI config reads/writes
* @dev: pci device struct
*
* This function allows userspace PCI config accesses to resume.
**/
void pci_unblock_user_cfg_access(struct pci_dev *dev)
{
unsigned long flags;
/* spinlock to synchronize with anyone reading saved config space */
spin_lock_irqsave(&pci_lock, flags);
dev->block_ucfg_access = 0;
spin_unlock_irqrestore(&pci_lock, flags);
}
EXPORT_SYMBOL_GPL(pci_unblock_user_cfg_access);
......@@ -58,6 +58,9 @@ static LIST_HEAD(bridge_list);
static void handle_hotplug_event_bridge (acpi_handle, u32, void *);
static void handle_hotplug_event_func (acpi_handle, u32, void *);
static void acpiphp_sanitize_bus(struct pci_bus *bus);
static void acpiphp_set_hpp_values(acpi_handle handle, struct pci_bus *bus);
/*
* initialization & terminatation routines
......@@ -796,8 +799,13 @@ static int enable_device(struct acpiphp_slot *slot)
}
}
pci_bus_size_bridges(bus);
pci_bus_assign_resources(bus);
acpiphp_sanitize_bus(bus);
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
acpiphp_set_hpp_values(DEVICE_ACPI_HANDLE(&bus->self->dev), bus);
acpiphp_configure_ioapics(DEVICE_ACPI_HANDLE(&bus->self->dev));
/* associate pci_dev to our representation */
list_for_each (l, &slot->funcs) {
......
......@@ -78,11 +78,20 @@ static void __iomem *csr_int_mask;
static int zt5550_hc_config(struct pci_dev *pdev)
{
int ret;
/* Since we know that no boards exist with two HC chips, treat it as an error */
if(hc_dev) {
err("too many host controller devices?");
return -EBUSY;
}
ret = pci_enable_device(pdev);
if(ret) {
err("cannot enable %s\n", pci_name(pdev));
return ret;
}
hc_dev = pdev;
dbg("hc_dev = %p", hc_dev);
dbg("pci resource start %lx", pci_resource_start(hc_dev, 1));
......@@ -91,7 +100,8 @@ static int zt5550_hc_config(struct pci_dev *pdev)
if(!request_mem_region(pci_resource_start(hc_dev, 1),
pci_resource_len(hc_dev, 1), MY_NAME)) {
err("cannot reserve MMIO region");
return -ENOMEM;
ret = -ENOMEM;
goto exit_disable_device;
}
hc_registers =
......@@ -99,9 +109,8 @@ static int zt5550_hc_config(struct pci_dev *pdev)
if(!hc_registers) {
err("cannot remap MMIO region %lx @ %lx",
pci_resource_len(hc_dev, 1), pci_resource_start(hc_dev, 1));
release_mem_region(pci_resource_start(hc_dev, 1),
pci_resource_len(hc_dev, 1));
return -ENODEV;
ret = -ENODEV;
goto exit_release_region;
}
csr_hc_index = hc_registers + CSR_HCINDEX;
......@@ -124,6 +133,13 @@ static int zt5550_hc_config(struct pci_dev *pdev)
writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask);
dbg("disabled timer0, timer1 and ENUM interrupts");
return 0;
exit_release_region:
release_mem_region(pci_resource_start(hc_dev, 1),
pci_resource_len(hc_dev, 1));
exit_disable_device:
pci_disable_device(hc_dev);
return ret;
}
static int zt5550_hc_cleanup(void)
......@@ -134,6 +150,7 @@ static int zt5550_hc_cleanup(void)
iounmap(hc_registers);
release_mem_region(pci_resource_start(hc_dev, 1),
pci_resource_len(hc_dev, 1));
pci_disable_device(hc_dev);
return 0;
}
......
......@@ -794,12 +794,21 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
u32 rc;
struct controller *ctrl;
struct pci_func *func;
int err;
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n",
pci_name(pdev), err);
return err;
}
// Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
err(msg_HPC_non_compaq_or_intel);
return -ENODEV;
rc = -ENODEV;
goto err_disable_device;
}
dbg("Vendor ID: %x\n", vendor_id);
......@@ -807,7 +816,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
dbg("revision: %d\n", rev);
if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
err(msg_HPC_rev_error);
return -ENODEV;
rc = -ENODEV;
goto err_disable_device;
}
/* Check for the proper subsytem ID's
......@@ -820,18 +830,20 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
err("%s : pci_read_config_word failed\n", __FUNCTION__);
return rc;
goto err_disable_device;
}
dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
err(msg_HPC_non_compaq_or_intel);
return -ENODEV;
rc = -ENODEV;
goto err_disable_device;
}
ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
err("%s : out of memory\n", __FUNCTION__);
return -ENOMEM;
rc = -ENOMEM;
goto err_disable_device;
}
memset(ctrl, 0, sizeof(struct controller));
......@@ -1264,6 +1276,8 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
kfree(ctrl->pci_bus);
err_free_ctrl:
kfree(ctrl);
err_disable_device:
pci_disable_device(pdev);
return rc;
}
......
......@@ -92,9 +92,10 @@ extern struct pci_bus *rpaphp_find_pci_bus(struct device_node *dn);
extern int rpaphp_claim_resource(struct pci_dev *dev, int resource);
extern int rpaphp_enable_pci_slot(struct slot *slot);
extern int register_pci_slot(struct slot *slot);
extern int rpaphp_unconfig_pci_adapter(struct slot *slot);
extern int rpaphp_get_pci_adapter_status(struct slot *slot, int is_init, u8 * value);
extern int rpaphp_config_pci_adapter(struct pci_bus *bus);
extern int rpaphp_unconfig_pci_adapter(struct pci_bus *bus);
/* rpaphp_core.c */
extern int rpaphp_add_slot(struct device_node *dn);
......
......@@ -426,8 +426,11 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
dbg("DISABLING SLOT %s\n", slot->name);
down(&rpaphp_sem);
retval = rpaphp_unconfig_pci_adapter(slot);
retval = rpaphp_unconfig_pci_adapter(slot->bus);
up(&rpaphp_sem);
slot->state = NOT_CONFIGURED;
info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
slot->name);
exit:
dbg("%s - Exit: rc[%d]\n", __FUNCTION__, retval);
return retval;
......
......@@ -319,20 +319,15 @@ static void rpaphp_eeh_remove_bus_device(struct pci_dev *dev)
return;
}
int rpaphp_unconfig_pci_adapter(struct slot *slot)
int rpaphp_unconfig_pci_adapter(struct pci_bus *bus)
{
struct pci_dev *dev, *tmp;
int retval = 0;
list_for_each_entry_safe(dev, tmp, slot->pci_devs, bus_list) {
list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
rpaphp_eeh_remove_bus_device(dev);
pci_remove_bus_device(dev);
}
slot->state = NOT_CONFIGURED;
info("%s: devices in slot[%s] unconfigured.\n", __FUNCTION__,
slot->name);
return retval;
return 0;
}
static int setup_pci_hotplug_slot_info(struct slot *slot)
......
......@@ -32,8 +32,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <asm/semaphore.h>
#include <asm/io.h>
#include "pci_hotplug.h"
#if !defined(MODULE)
......@@ -52,42 +50,18 @@ extern int shpchp_debug;
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
struct pci_func {
struct pci_func *next;
u8 bus;
u8 device;
u8 function;
u8 is_a_board;
u16 status;
u8 configured;
u8 switch_save;
u8 presence_save;
u8 pwr_save;
u32 base_length[0x06];
u8 base_type[0x06];
u16 reserved2;
u32 config_space[0x20];
struct pci_resource *mem_head;
struct pci_resource *p_mem_head;
struct pci_resource *io_head;
struct pci_resource *bus_head;
struct pci_dev* pci_dev;
};
#define SLOT_MAGIC 0x67267321
struct slot {
u32 magic;
struct slot *next;
u8 bus;
u8 device;
u16 status;
u32 number;
u8 is_a_board;
u8 configured;
u8 state;
u8 switch_save;
u8 presence_save;
u32 capabilities;
u16 reserved2;
u8 pwr_save;
struct timer_list task_event;
u8 hp_slot;
struct controller *ctrl;
......@@ -96,12 +70,6 @@ struct slot {
struct list_head slot_list;
};
struct pci_resource {
struct pci_resource * next;
u32 base;
u32 length;
};
struct event_info {
u32 event_type;
u8 hp_slot;
......@@ -110,13 +78,9 @@ struct event_info {
struct controller {
struct controller *next;
struct semaphore crit_sect; /* critical section semaphore */
void * hpc_ctlr_handle; /* HPC controller handle */
struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_resource *mem_head;
struct pci_resource *p_mem_head;
struct pci_resource *io_head;
struct pci_resource *bus_head;
struct pci_dev *pci_dev;
struct pci_bus *pci_bus;
struct event_info event_queue[10];
......@@ -124,33 +88,21 @@ struct controller {
struct hpc_ops *hpc_ops;
wait_queue_head_t queue; /* sleep & wake process */
u8 next_event;
u8 seg;
u8 bus;
u8 device;
u8 function;
u8 rev;
u8 slot_device_offset;
u8 add_support;
enum pci_bus_speed speed;
u32 first_slot; /* First physical slot number */
u8 slot_bus; /* Bus where the slots handled by this controller sit */
u8 push_flag;
u16 ctlrcap;
u16 vendor_id;
};
struct irq_mapping {
u8 barber_pole;
u8 valid_INT;
u8 interrupt[4];
};
struct resource_lists {
struct pci_resource *mem_head;
struct pci_resource *p_mem_head;
struct pci_resource *io_head;
struct pci_resource *bus_head;
struct irq_mapping *irqs;
struct hotplug_params {
u8 cache_line_size;
u8 latency_timer;
u8 enable_serr;
u8 enable_perr;
};
/* Define AMD SHPC ID */
......@@ -194,24 +146,16 @@ struct resource_lists {
* error Messages
*/
#define msg_initialization_err "Initialization failure, error=%d\n"
#define msg_HPC_rev_error "Unsupported revision of the PCI hot plug controller found.\n"
#define msg_HPC_non_shpc "The PCI hot plug controller is not supported by this driver.\n"
#define msg_HPC_not_supported "This system is not supported by this version of shpcphd mdoule. Upgrade to a newer version of shpchpd\n"
#define msg_unable_to_save "Unable to store PCI hot plug add resource information. This system must be rebooted before adding any PCI devices.\n"
#define msg_button_on "PCI slot #%d - powering on due to button press.\n"
#define msg_button_off "PCI slot #%d - powering off due to button press.\n"
#define msg_button_cancel "PCI slot #%d - action canceled due to button press.\n"
#define msg_button_ignore "PCI slot #%d - button press ignored. (action in progress...)\n"
/* sysfs functions for the hotplug controller info */
extern void shpchp_create_ctrl_files (struct controller *ctrl);
/* controller functions */
extern int shpchprm_find_available_resources(struct controller *ctrl);
extern int shpchp_event_start_thread(void);
extern void shpchp_event_stop_thread(void);
extern struct pci_func *shpchp_slot_create(unsigned char busnumber);
extern struct pci_func *shpchp_slot_find(unsigned char bus, unsigned char device, unsigned char index);
extern int shpchp_enable_slot(struct slot *slot);
extern int shpchp_disable_slot(struct slot *slot);
......@@ -220,29 +164,20 @@ extern u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id);
extern u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id);
extern u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id);
/* resource functions */
extern int shpchp_resource_sort_and_combine(struct pci_resource **head);
/* pci functions */
extern int shpchp_set_irq(u8 bus_num, u8 dev_num, u8 int_pin, u8 irq_num);
/*extern int shpchp_get_bus_dev(struct controller *ctrl, u8 *bus_num, u8 *dev_num, struct slot *slot);*/
extern int shpchp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num);
extern int shpchp_save_used_resources(struct controller *ctrl, struct pci_func * func, int flag);
extern int shpchp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot);
extern void shpchp_destroy_board_resources(struct pci_func * func);
extern int shpchp_return_board_resources(struct pci_func * func, struct resource_lists * resources);
extern void shpchp_destroy_resource_list(struct resource_lists * resources);
extern int shpchp_configure_device(struct controller* ctrl, struct pci_func* func);
extern int shpchp_unconfigure_device(struct pci_func* func);
extern int shpchp_configure_device(struct slot *p_slot);
extern int shpchp_unconfigure_device(struct slot *p_slot);
extern void get_hp_hw_control_from_firmware(struct pci_dev *dev);
extern void get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp);
extern int shpchprm_get_physical_slot_number(struct controller *ctrl,
u32 *sun, u8 busnum, u8 devnum);
extern void shpchp_remove_ctrl_files(struct controller *ctrl);
/* Global variables */
extern struct controller *shpchp_ctrl_list;
extern struct pci_func *shpchp_slot_list[256];
/* These are added to support AMD shpc */
extern u8 shpchp_nic_irq;
extern u8 shpchp_disk_irq;
struct ctrl_reg {
volatile u32 base_offset;
......@@ -298,7 +233,7 @@ enum ctrl_offsets {
SLOT11 = offsetof(struct ctrl_reg, slot11),
SLOT12 = offsetof(struct ctrl_reg, slot12),
};
typedef u8(*php_intr_callback_t) (unsigned int change_id, void *instance_id);
typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
struct php_ctlr_state_s {
struct php_ctlr_state_s *pnext;
struct pci_dev *pci_dev;
......@@ -359,12 +294,9 @@ static inline struct slot *shpchp_find_slot (struct controller *ctrl, u8 device)
p_slot = ctrl->slot;
dbg("p_slot = %p\n", p_slot);
while (p_slot && (p_slot->device != device)) {
tmp_slot = p_slot;
p_slot = p_slot->next;
dbg("In while loop, p_slot = %p\n", p_slot);
}
if (p_slot == NULL) {
err("ERROR: shpchp_find_slot device=0x%x\n", device);
......@@ -379,8 +311,6 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl)
DECLARE_WAITQUEUE(wait, current);
int retval = 0;
dbg("%s : start\n",__FUNCTION__);
add_wait_queue(&ctrl->queue, &wait);
if (!shpchp_poll_mode) {
......@@ -394,19 +324,9 @@ static inline int wait_for_ctrl_irq (struct controller *ctrl)
if (signal_pending(current))
retval = -EINTR;
dbg("%s : end\n", __FUNCTION__);
return retval;
}
/* Puts node back in the resource list pointed to by head */
static inline void return_resource(struct pci_resource **head, struct pci_resource *node)
{
if (!node || !head)
return;
node->next = *head;
*head = node;
}
#define SLOT_NAME_SIZE 10
static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
......@@ -420,11 +340,7 @@ enum php_ctlr_type {
ACPI
};
int shpc_init( struct controller *ctrl, struct pci_dev *pdev,
php_intr_callback_t attention_button_callback,
php_intr_callback_t switch_change_callback,
php_intr_callback_t presence_change_callback,
php_intr_callback_t power_fault_callback);
int shpc_init( struct controller *ctrl, struct pci_dev *pdev);
int shpc_get_ctlr_slot_config( struct controller *ctrl,
int *num_ctlr_slots,
......@@ -437,8 +353,6 @@ struct hpc_ops {
int (*power_on_slot ) (struct slot *slot);
int (*slot_enable ) (struct slot *slot);
int (*slot_disable ) (struct slot *slot);
int (*enable_all_slots) (struct slot *slot);
int (*pwr_on_all_slots) (struct slot *slot);
int (*set_bus_speed_mode) (struct slot *slot, enum pci_bus_speed speed);
int (*get_power_status) (struct slot *slot, u8 *status);
int (*get_attention_status) (struct slot *slot, u8 *status);
......
......@@ -27,26 +27,18 @@
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include "shpchp.h"
#include "shpchprm.h"
/* Global variables */
int shpchp_debug;
int shpchp_poll_mode;
int shpchp_poll_time;
struct controller *shpchp_ctrl_list; /* = NULL */
struct pci_func *shpchp_slot_list[256];
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
......@@ -113,8 +105,6 @@ static int init_slots(struct controller *ctrl)
u32 slot_number, sun;
int result = -ENOMEM;
dbg("%s\n",__FUNCTION__);
number_of_slots = ctrl->num_slots;
slot_device = ctrl->slot_device_offset;
slot_number = ctrl->first_slot;
......@@ -352,6 +342,17 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
return 0;
}
static int is_shpc_capable(struct pci_dev *dev)
{
if ((dev->vendor == PCI_VENDOR_ID_AMD) || (dev->device ==
PCI_DEVICE_ID_AMD_GOLAM_7450))
return 1;
if (pci_find_capability(dev, PCI_CAP_ID_SHPC))
return 1;
return 0;
}
static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
int rc;
......@@ -360,6 +361,9 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
int first_device_num; /* first PCI device number supported by this SHPC */
int num_ctlr_slots; /* number of slots supported by this SHPC */
if (!is_shpc_capable(pdev))
return -ENODEV;
ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
err("%s : out of memory\n", __FUNCTION__);
......@@ -367,19 +371,12 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
memset(ctrl, 0, sizeof(struct controller));
dbg("DRV_thread pid = %d\n", current->pid);
rc = shpc_init(ctrl, pdev,
(php_intr_callback_t) shpchp_handle_attention_button,
(php_intr_callback_t) shpchp_handle_switch_change,
(php_intr_callback_t) shpchp_handle_presence_change,
(php_intr_callback_t) shpchp_handle_power_fault);
rc = shpc_init(ctrl, pdev);
if (rc) {
dbg("%s: controller initialization failed\n", SHPC_MODULE_NAME);
goto err_out_free_ctrl;
}
dbg("%s: controller initialization success\n", __FUNCTION__);
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
pci_set_drvdata(pdev, ctrl);
......@@ -411,22 +408,7 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
first_device_num = ctrl->slot_device_offset;
num_ctlr_slots = ctrl->num_slots;
/* Store PCI Config Space for all devices on this bus */
rc = shpchp_save_config(ctrl, ctrl->slot_bus, num_ctlr_slots, first_device_num);
if (rc) {
err("%s: unable to save PCI configuration data, error %d\n", __FUNCTION__, rc);
goto err_out_free_ctrl_bus;
}
/* Get IO, memory, and IRQ resources for new devices */
rc = shpchprm_find_available_resources(ctrl);
ctrl->add_support = !rc;
if (rc) {
dbg("shpchprm_find_available_resources = %#x\n", rc);
err("unable to locate PCI configuration resources for hot plug add.\n");
goto err_out_free_ctrl_bus;
}
ctrl->add_support = 1;
/* Setup the slot information structures */
rc = init_slots(ctrl);
......@@ -477,7 +459,6 @@ static int shpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
static int shpc_start_thread(void)
{
int loop;
int retval = 0;
dbg("Initialize + Start the notification/polling mechanism \n");
......@@ -488,48 +469,21 @@ static int shpc_start_thread(void)
return retval;
}
dbg("Initialize slot lists\n");
/* One slot list for each bus in the system */
for (loop = 0; loop < 256; loop++) {
shpchp_slot_list[loop] = NULL;
}
return retval;
}
static inline void __exit
free_shpchp_res(struct pci_resource *res)
{
struct pci_resource *tres;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
}
static void __exit unload_shpchpd(void)
{
struct pci_func *next;
struct pci_func *TempSlot;
int loop;
struct controller *ctrl;
struct controller *tctrl;
ctrl = shpchp_ctrl_list;
while (ctrl) {
shpchp_remove_ctrl_files(ctrl);
cleanup_slots(ctrl);
free_shpchp_res(ctrl->io_head);
free_shpchp_res(ctrl->mem_head);
free_shpchp_res(ctrl->p_mem_head);
free_shpchp_res(ctrl->bus_head);
kfree (ctrl->pci_bus);
dbg("%s: calling release_ctlr\n", __FUNCTION__);
ctrl->hpc_ops->release_ctlr(ctrl);
tctrl = ctrl;
......@@ -538,20 +492,6 @@ static void __exit unload_shpchpd(void)
kfree(tctrl);
}
for (loop = 0; loop < 256; loop++) {
next = shpchp_slot_list[loop];
while (next != NULL) {
free_shpchp_res(next->io_head);
free_shpchp_res(next->mem_head);
free_shpchp_res(next->p_mem_head);
free_shpchp_res(next->bus_head);
TempSlot = next;
next = next->next;
kfree(TempSlot);
}
}
/* Stop the notification mechanism */
shpchp_event_stop_thread();
......@@ -596,20 +536,14 @@ static int __init shpcd_init(void)
if (retval)
goto error_hpc_init;
retval = shpchprm_init(PCI);
if (!retval) {
retval = pci_register_driver(&shpc_driver);
dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval);
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
}
error_hpc_init:
if (retval) {
shpchprm_cleanup();
shpchp_event_stop_thread();
} else
shpchprm_print_pirt();
}
return retval;
}
......@@ -618,9 +552,6 @@ static void __exit shpcd_cleanup(void)
dbg("unload_shpchpd()\n");
unload_shpchpd();
shpchprm_cleanup();
dbg("pci_unregister_driver\n");
pci_unregister_driver(&shpc_driver);
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -26,12 +26,9 @@
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/workqueue.h>
#include <linux/pci.h>
#include "shpchp.h"
......@@ -40,104 +37,60 @@
static ssize_t show_ctrl (struct device *dev, struct device_attribute *attr, char *buf)
{
struct pci_dev *pci_dev;
struct controller *ctrl;
struct pci_dev *pdev;
char * out = buf;
int index;
struct pci_resource *res;
int index, busnr;
struct resource *res;
struct pci_bus *bus;
pci_dev = container_of (dev, struct pci_dev, dev);
ctrl = pci_get_drvdata(pci_dev);
pdev = container_of (dev, struct pci_dev, dev);
bus = pdev->subordinate;
out += sprintf(buf, "Free resources: memory\n");
index = 11;
res = ctrl->mem_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
res = bus->resource[index];
if (res && (res->flags & IORESOURCE_MEM) &&
!(res->flags & IORESOURCE_PREFETCH)) {
out += sprintf(out, "start = %8.8lx, length = %8.8lx\n",
res->start, (res->end - res->start));
}
}
out += sprintf(out, "Free resources: prefetchable memory\n");
index = 11;
res = ctrl->p_mem_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
res = bus->resource[index];
if (res && (res->flags & IORESOURCE_MEM) &&
(res->flags & IORESOURCE_PREFETCH)) {
out += sprintf(out, "start = %8.8lx, length = %8.8lx\n",
res->start, (res->end - res->start));
}
}
out += sprintf(out, "Free resources: IO\n");
index = 11;
res = ctrl->io_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
for (index = 0; index < PCI_BUS_NUM_RESOURCES; index++) {
res = bus->resource[index];
if (res && (res->flags & IORESOURCE_IO)) {
out += sprintf(out, "start = %8.8lx, length = %8.8lx\n",
res->start, (res->end - res->start));
}
}
out += sprintf(out, "Free resources: bus numbers\n");
index = 11;
res = ctrl->bus_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
for (busnr = bus->secondary; busnr <= bus->subordinate; busnr++) {
if (!pci_find_bus(pci_domain_nr(bus), busnr))
break;
}
if (busnr < bus->subordinate)
out += sprintf(out, "start = %8.8x, length = %8.8x\n",
busnr, (bus->subordinate - busnr));
return out - buf;
}
static DEVICE_ATTR (ctrl, S_IRUGO, show_ctrl, NULL);
static ssize_t show_dev (struct device *dev, struct device_attribute *attr, char *buf)
void shpchp_create_ctrl_files (struct controller *ctrl)
{
struct pci_dev *pci_dev;
struct controller *ctrl;
char * out = buf;
int index;
struct pci_resource *res;
struct pci_func *new_slot;
struct slot *slot;
pci_dev = container_of (dev, struct pci_dev, dev);
ctrl = pci_get_drvdata(pci_dev);
slot=ctrl->slot;
while (slot) {
new_slot = shpchp_slot_find(slot->bus, slot->device, 0);
if (!new_slot)
break;
out += sprintf(out, "assigned resources: memory\n");
index = 11;
res = new_slot->mem_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
}
out += sprintf(out, "assigned resources: prefetchable memory\n");
index = 11;
res = new_slot->p_mem_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
}
out += sprintf(out, "assigned resources: IO\n");
index = 11;
res = new_slot->io_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
}
out += sprintf(out, "assigned resources: bus numbers\n");
index = 11;
res = new_slot->bus_head;
while (res && index--) {
out += sprintf(out, "start = %8.8x, length = %8.8x\n", res->base, res->length);
res = res->next;
}
slot=slot->next;
}
return out - buf;
device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl);
}
static DEVICE_ATTR (dev, S_IRUGO, show_dev, NULL);
void shpchp_create_ctrl_files (struct controller *ctrl)
void shpchp_remove_ctrl_files(struct controller *ctrl)
{
device_create_file (&ctrl->pci_dev->dev, &dev_attr_ctrl);
device_create_file (&ctrl->pci_dev->dev, &dev_attr_dev);
device_remove_file(&ctrl->pci_dev->dev, &dev_attr_ctrl);
}
/*
* SHPCHPRM : SHPCHP Resource Manager for ACPI/non-ACPI platform
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHPRM_H_
#define _SHPCHPRM_H_
#ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY
#include "shpchprm_legacy.h"
#else
#include "shpchprm_nonacpi.h"
#endif
int shpchprm_init(enum php_ctlr_type ct);
void shpchprm_cleanup(void);
int shpchprm_print_pirt(void);
int shpchprm_find_available_resources(struct controller *ctrl);
int shpchprm_set_hpp(struct controller *ctrl, struct pci_func *func, u8 card_type);
void shpchprm_enable_card(struct controller *ctrl, struct pci_func *func, u8 card_type);
int shpchprm_get_physical_slot_number(struct controller *ctrl, u32 *sun, u8 busnum, u8 devnum);
#ifdef DEBUG
#define RES_CHECK(this, bits) \
{ if (((this) & (bits - 1))) \
printk("%s:%d ERR: potential res loss!\n", __FUNCTION__, __LINE__); }
#else
#define RES_CHECK(this, bits)
#endif
#endif /* _SHPCHPRM_H_ */
This diff is collapsed.
This diff is collapsed.
/*
* SHPCHPRM Legacy: PHP Resource Manager for Non-ACPI/Legacy platform using HRT
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHPRM_LEGACY_H_
#define _SHPCHPRM_LEGACY_H_
#define ROM_PHY_ADDR 0x0F0000
#define ROM_PHY_LEN 0x00FFFF
struct slot_rt {
u8 dev_func;
u8 primary_bus;
u8 secondary_bus;
u8 max_bus;
u16 io_base;
u16 io_length;
u16 mem_base;
u16 mem_length;
u16 pre_mem_base;
u16 pre_mem_length;
} __attribute__ ((packed));
/* offsets to the hotplug slot resource table registers based on the above structure layout */
enum slot_rt_offsets {
DEV_FUNC = offsetof(struct slot_rt, dev_func),
PRIMARY_BUS = offsetof(struct slot_rt, primary_bus),
SECONDARY_BUS = offsetof(struct slot_rt, secondary_bus),
MAX_BUS = offsetof(struct slot_rt, max_bus),
IO_BASE = offsetof(struct slot_rt, io_base),
IO_LENGTH = offsetof(struct slot_rt, io_length),
MEM_BASE = offsetof(struct slot_rt, mem_base),
MEM_LENGTH = offsetof(struct slot_rt, mem_length),
PRE_MEM_BASE = offsetof(struct slot_rt, pre_mem_base),
PRE_MEM_LENGTH = offsetof(struct slot_rt, pre_mem_length),
};
struct hrt {
char sig0;
char sig1;
char sig2;
char sig3;
u16 unused_IRQ;
u16 PCIIRQ;
u8 number_of_entries;
u8 revision;
u16 reserved1;
u32 reserved2;
} __attribute__ ((packed));
/* offsets to the hotplug resource table registers based on the above structure layout */
enum hrt_offsets {
SIG0 = offsetof(struct hrt, sig0),
SIG1 = offsetof(struct hrt, sig1),
SIG2 = offsetof(struct hrt, sig2),
SIG3 = offsetof(struct hrt, sig3),
UNUSED_IRQ = offsetof(struct hrt, unused_IRQ),
PCIIRQ = offsetof(struct hrt, PCIIRQ),
NUMBER_OF_ENTRIES = offsetof(struct hrt, number_of_entries),
REVISION = offsetof(struct hrt, revision),
HRT_RESERVED1 = offsetof(struct hrt, reserved1),
HRT_RESERVED2 = offsetof(struct hrt, reserved2),
};
struct irq_info {
u8 bus, devfn; /* bus, device and function */
struct {
u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
u16 bitmap; /* Available IRQs */
} __attribute__ ((packed)) irq[4];
u8 slot; /* slot number, 0=onboard */
u8 rfu;
} __attribute__ ((packed));
struct irq_routing_table {
u32 signature; /* PIRQ_SIGNATURE should be here */
u16 version; /* PIRQ_VERSION */
u16 size; /* Table size in bytes */
u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
u32 miniport_data; /* Crap */
u8 rfu[11];
u8 checksum; /* Modulo 256 checksum must give zero */
struct irq_info slots[0];
} __attribute__ ((packed));
#endif /* _SHPCHPRM_LEGACY_H_ */
This diff is collapsed.
/*
* SHPCHPRM NONACPI: PHP Resource Manager for Non-ACPI/Legacy platform
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#ifndef _SHPCHPRM_NONACPI_H_
#define _SHPCHPRM_NONACPI_H_
struct irq_info {
u8 bus, devfn; /* bus, device and function */
struct {
u8 link; /* IRQ line ID, chipset dependent, 0=not routed */
u16 bitmap; /* Available IRQs */
} __attribute__ ((packed)) irq[4];
u8 slot; /* slot number, 0=onboard */
u8 rfu;
} __attribute__ ((packed));
struct irq_routing_table {
u32 signature; /* PIRQ_SIGNATURE should be here */
u16 version; /* PIRQ_VERSION */
u16 size; /* Table size in bytes */
u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
u16 exclusive_irqs; /* IRQs devoted exclusively to PCI usage */
u16 rtr_vendor, rtr_device; /* Vendor and device ID of interrupt router */
u32 miniport_data; /* Crap */
u8 rfu[11];
u8 checksum; /* Modulo 256 checksum must give zero */
struct irq_info slots[0];
} __attribute__ ((packed));
#endif /* _SHPCHPRM_NONACPI_H_ */
......@@ -575,6 +575,8 @@ static int msi_capability_init(struct pci_dev *dev)
/**
* msix_capability_init - configure device's MSI-X capability
* @dev: pointer to the pci_dev data structure of MSI-X device function
* @entries: pointer to an array of struct msix_entry entries
* @nvec: number of @entries
*
* Setup the MSI-X capability structure of device function with a
* single MSI-X vector. A return of zero indicates the successful setup of
......
......@@ -26,7 +26,10 @@ struct pci_dynid {
#ifdef CONFIG_HOTPLUG
/**
* store_new_id
* store_new_id - add a new PCI device ID to this driver and re-probe devices
* @driver: target device driver
* @buf: buffer for scanning device ID data
* @count: input size
*
* Adds a new dynamic pci device ID to this driver,
* and causes the driver to probe for all devices again.
......@@ -194,6 +197,8 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
/**
* __pci_device_probe()
* @drv: driver to call to check if it wants the PCI device
* @pci_dev: PCI device being probed
*
* returns 0 on success, else error.
* side-effect: pci_dev->driver is set to drv when drv claims pci_dev.
......@@ -377,6 +382,10 @@ int pci_register_driver(struct pci_driver *drv)
* the pci shutdown function, this test can go away. */
if (!drv->driver.shutdown)
drv->driver.shutdown = pci_device_shutdown;
else
printk(KERN_WARNING "Warning: PCI driver %s has a struct "
"device_driver shutdown method, please update!\n",
drv->name);
drv->driver.owner = drv->owner;
drv->driver.kobj.ktype = &pci_driver_kobj_type;
......@@ -436,11 +445,11 @@ pci_dev_driver(const struct pci_dev *dev)
/**
* pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure
* @ids: array of PCI device id structures to search in
* @dev: the PCI device structure to match against
* @drv: the device driver to search for matching PCI device id structures
*
* Used by a driver to check whether a PCI device present in the
* system is in its list of supported devices.Returns the matching
* system is in its list of supported devices. Returns the matching
* pci_device_id structure or %NULL if there is no match.
*/
static int pci_bus_match(struct device *dev, struct device_driver *drv)
......
......@@ -130,7 +130,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
if ((off & 1) && size) {
u8 val;
pci_read_config_byte(dev, off, &val);
pci_user_read_config_byte(dev, off, &val);
data[off - init_off] = val;
off++;
size--;
......@@ -138,7 +138,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
if ((off & 3) && size > 2) {
u16 val;
pci_read_config_word(dev, off, &val);
pci_user_read_config_word(dev, off, &val);
data[off - init_off] = val & 0xff;
data[off - init_off + 1] = (val >> 8) & 0xff;
off += 2;
......@@ -147,7 +147,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
while (size > 3) {
u32 val;
pci_read_config_dword(dev, off, &val);
pci_user_read_config_dword(dev, off, &val);
data[off - init_off] = val & 0xff;
data[off - init_off + 1] = (val >> 8) & 0xff;
data[off - init_off + 2] = (val >> 16) & 0xff;
......@@ -158,7 +158,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
if (size >= 2) {
u16 val;
pci_read_config_word(dev, off, &val);
pci_user_read_config_word(dev, off, &val);
data[off - init_off] = val & 0xff;
data[off - init_off + 1] = (val >> 8) & 0xff;
off += 2;
......@@ -167,7 +167,7 @@ pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
if (size > 0) {
u8 val;
pci_read_config_byte(dev, off, &val);
pci_user_read_config_byte(dev, off, &val);
data[off - init_off] = val;
off++;
--size;
......@@ -192,7 +192,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
}
if ((off & 1) && size) {
pci_write_config_byte(dev, off, data[off - init_off]);
pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
size--;
}
......@@ -200,7 +200,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
if ((off & 3) && size > 2) {
u16 val = data[off - init_off];
val |= (u16) data[off - init_off + 1] << 8;
pci_write_config_word(dev, off, val);
pci_user_write_config_word(dev, off, val);
off += 2;
size -= 2;
}
......@@ -210,7 +210,7 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
val |= (u32) data[off - init_off + 1] << 8;
val |= (u32) data[off - init_off + 2] << 16;
val |= (u32) data[off - init_off + 3] << 24;
pci_write_config_dword(dev, off, val);
pci_user_write_config_dword(dev, off, val);
off += 4;
size -= 4;
}
......@@ -218,13 +218,13 @@ pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
if (size >= 2) {
u16 val = data[off - init_off];
val |= (u16) data[off - init_off + 1] << 8;
pci_write_config_word(dev, off, val);
pci_user_write_config_word(dev, off, val);
off += 2;
size -= 2;
}
if (size) {
pci_write_config_byte(dev, off, data[off - init_off]);
pci_user_write_config_byte(dev, off, data[off - init_off]);
off++;
--size;
}
......
......@@ -252,6 +252,8 @@ pci_restore_bars(struct pci_dev *dev)
pci_update_resource(dev, &dev->resource[i], i);
}
int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
/**
* pci_set_power_state - Set the power state of a PCI device
* @dev: PCI device to be suspended
......@@ -266,7 +268,6 @@ pci_restore_bars(struct pci_dev *dev)
* -EIO if device does not support PCI PM.
* 0 if we can successfully change the power state.
*/
int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
int
pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
......@@ -314,19 +315,19 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
* sets PowerState to 0.
*/
switch (dev->current_state) {
case PCI_D0:
case PCI_D1:
case PCI_D2:
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
break;
case PCI_UNKNOWN: /* Boot-up */
if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
&& !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
need_restore = 1;
/* Fall-through: force to D0 */
case PCI_D3hot:
case PCI_D3cold:
case PCI_POWER_ERROR:
pmcsr = 0;
break;
default:
pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
pmcsr |= state;
pmcsr = 0;
break;
}
......@@ -808,8 +809,8 @@ pci_clear_mwi(struct pci_dev *dev)
/**
* pci_intx - enables/disables PCI INTx for device dev
* @dev: the PCI device to operate on
* @enable: boolean
* @pdev: the PCI device to operate on
* @enable: boolean: whether to enable or disable PCI INTx
*
* Enables/disables PCI INTx for device dev
*/
......
......@@ -15,6 +15,13 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val);
extern int pci_user_read_config_dword(struct pci_dev *dev, int where, u32 *val);
extern int pci_user_write_config_byte(struct pci_dev *dev, int where, u8 val);
extern int pci_user_write_config_word(struct pci_dev *dev, int where, u16 val);
extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val);
/* PCI /proc functions */
#ifdef CONFIG_PROC_FS
extern int pci_proc_attach_device(struct pci_dev *dev);
......
......@@ -669,6 +669,7 @@ static void pci_release_dev(struct device *dev)
/**
* pci_cfg_space_size - get the configuration space size of the PCI device.
* @dev: PCI device
*
* Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices
* have 4096 bytes. Even if the device is capable, that doesn't mean we can
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -4944,6 +4944,7 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
int rc;
ENTER;
pci_unblock_user_cfg_access(ioa_cfg->pdev);
rc = pci_restore_state(ioa_cfg->pdev);
if (rc != PCIBIOS_SUCCESSFUL) {
......@@ -4998,6 +4999,7 @@ static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd)
int rc;
ENTER;
pci_block_user_cfg_access(ioa_cfg->pdev);
rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START);
if (rc != PCIBIOS_SUCCESSFUL) {
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment