[MIPS] remove unused mips_machtype

Removed unused mips_machtype.  These are only set but not used.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/au1000/db1x00/init.c

@@ -57,17 +57,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	/* Set the platform # */
-#if	defined(CONFIG_MIPS_DB1550)
-	mips_machtype = MACH_DB1550;
-#elif	defined(CONFIG_MIPS_DB1500)
-	mips_machtype = MACH_DB1500;
-#elif	defined(CONFIG_MIPS_DB1100)
-	mips_machtype = MACH_DB1100;
-#else
-	mips_machtype = MACH_DB1000;
-#endif
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/au1000/mtx-1/init.c

@@ -54,8 +54,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_MTX1;	/* set the platform # */
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/au1000/pb1000/init.c

@@ -52,8 +52,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1000;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/pb1100/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg3;
 
-	mips_machtype = MACH_PB1100;
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/au1000/pb1200/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1200;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/pb1500/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1500;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/pb1550/init.c

@@ -53,8 +53,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_PB1550;
-
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str) {

arch/mips/au1000/xxs1500/init.c

@@ -52,8 +52,6 @@ void __init prom_init(void)
 	prom_argv = (char **) fw_arg1;
 	prom_envp = (char **) fw_arg2;
 
-	mips_machtype = MACH_XXS1500;	/* set the platform # */
-
 	prom_init_cmdline();
 
 	memsize_str = prom_getenv("memsize");

arch/mips/basler/excite/excite_prom.c

@@ -135,8 +135,6 @@ void __init prom_init(void)
 #ifdef CONFIG_64BIT
 #	error 64 bit support not implemented
 #endif /* CONFIG_64BIT */
-
-	mips_machtype = MACH_TITAN_EXCITE;
 }
 
 /* This is called from free_initmem(), so we need to provide it */

arch/mips/gt64120/wrppmc/setup.c

@@ -121,8 +121,6 @@ const char *get_system_type(void)
  */
 void __init prom_init(void)
 {
-	mips_machtype = MACH_WRPPMC;
-
 	add_memory_region(WRPPMC_SDRAM_SCS0_BASE, WRPPMC_SDRAM_SCS0_SIZE, BOOT_MEM_RAM);
 	add_memory_region(WRPPMC_BOOTROM_BASE, WRPPMC_BOOTROM_SIZE, BOOT_MEM_ROM_DATA);
 

arch/mips/jmr3927/rbhma3100/init.c

@@ -52,10 +52,6 @@ void __init prom_init(void)
 		puts("Warning: TX3927 TLB off\n");
 #endif
 
-#ifdef CONFIG_TOSHIBA_JMR3927
-	mips_machtype = MACH_TOSHIBA_JMR3927;
-#endif
-
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
 }

arch/mips/lemote/lm2e/prom.c

@@ -57,8 +57,6 @@ void __init prom_init(void)
 	arg = (int *)fw_arg1;
 	env = (int *)fw_arg2;
 
-	mips_machtype = MACH_LEMOTE_FULONG;
-
 	prom_init_cmdline();
 
 	if ((strstr(arcs_cmdline, "console=")) == NULL)

arch/mips/philips/pnx8550/jbs/init.c

@@ -45,11 +45,8 @@ const char *get_system_type(void)
 
 void __init prom_init(void)
 {
-
 	unsigned long memsize;
 
-	mips_machtype = MACH_PHILIPS_JBS;
-
 	//memsize = 0x02800000; /* Trimedia uses memory above */
 	memsize = 0x08000000; /* Trimedia uses memory above */
 	add_memory_region(0, memsize, BOOT_MEM_RAM);

arch/mips/philips/pnx8550/stb810/prom_init.c

@@ -41,8 +41,6 @@ void __init prom_init(void)
 
 	prom_init_cmdline();
 
-	mips_machtype = MACH_PHILIPS_STB810;
-
 	memsize = 0x08000000; /* Trimedia uses memory above */
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/pmc-sierra/yosemite/prom.c

@@ -126,8 +126,6 @@ void __init prom_init(void)
 		env++;
 	}
 
-	mips_machtype = MACH_TITAN_YOSEMITE;
-
 	prom_grab_secondary();
 }
 

arch/mips/tx4938/toshiba_rbtx4938/prom.c

@@ -47,7 +47,6 @@ void __init prom_init(void)
 #ifndef CONFIG_TX4938_NAND_BOOT
 	prom_init_cmdline();
 #endif
-	mips_machtype = MACH_TOSHIBA_RBTX4938;
 
 	msize = tx4938_get_mem_size();
 	add_memory_region(0, msize << 20, BOOT_MEM_RAM);

arch/mips/vr41xx/nec-cmbvr4133/setup.c

@@ -64,8 +64,6 @@ static void __init nec_cmbvr4133_setup(void)
 #endif
 	set_io_port_base(KSEG1ADDR(0x16000000));
 
-	mips_machtype = MACH_NEC_CMBVR4133;
-
 #ifdef CONFIG_PCI
 #ifdef CONFIG_ROCKHOPPER
 	ali_m5229_preinit();

include/asm-mips/bootinfo.h

@@ -47,22 +47,11 @@
 #define  MACH_DS5800		9	/* DECsystem 5800		*/
 #define  MACH_DS5900		10	/* DECsystem 5900		*/
 
-/*
- * Valid machtype for group ARC
- */
-#define MACH_DESKSTATION_RPC44  0	/* Deskstation rPC44 */
-#define MACH_DESKSTATION_TYNE	1	/* Deskstation Tyne */
-
 /*
  * Valid machtype for group SNI_RM
  */
 #define  MACH_SNI_RM200_PCI	0	/* RM200/RM300/RM400 PCI series */
 
-/*
- * Valid machtype for group ACN
- */
-#define  MACH_ACN_MIPS_BOARD	0       /* ACN MIPS single board        */
-
 /*
  * Valid machtype for group SGI
  */
@@ -72,44 +61,6 @@
 #define  MACH_SGI_IP32		3	/* O2				*/
 #define  MACH_SGI_IP30		4	/* Octane, Octane2              */
 
-/*
- * Valid machtype for group COBALT
- */
-#define  MACH_COBALT_27		0	/* Proto "27" hardware		*/
-
-/*
- * Valid machtype for group BAGET
- */
-#define  MACH_BAGET201		0	/* BT23-201 */
-#define  MACH_BAGET202		1	/* BT23-202 */
-
-/*
- * Cosine boards.
- */
-#define  MACH_COSINE_ORION	0
-
-/*
- * Valid machtype for group MOMENCO
- */
-#define  MACH_MOMENCO_OCELOT	0
-#define  MACH_MOMENCO_OCELOT_G	1	/* no more supported (may 2007) */
-#define  MACH_MOMENCO_OCELOT_C	2	/* no more supported (jun 2007) */
-#define  MACH_MOMENCO_JAGUAR_ATX 3	/* no more supported (may 2007) */
-#define  MACH_MOMENCO_OCELOT_3	4
-
-/*
- * Valid machtype for group PHILIPS
- */
-#define  MACH_PHILIPS_NINO	0	/* Nino */
-#define  MACH_PHILIPS_VELO	1	/* Velo */
-#define  MACH_PHILIPS_JBS	2	/* JBS */
-#define  MACH_PHILIPS_STB810	3	/* STB810 */
-
-/*
- * Valid machtype for group SIBYTE
- */
-#define  MACH_SWARM              0
-
 /*
  * Valid machtypes for group Toshiba
  */
@@ -121,64 +72,17 @@
 #define  MACH_TOSHIBA_RBTX4937	5
 #define  MACH_TOSHIBA_RBTX4938	6
 
-/*
- * Valid machtype for group Alchemy
- */
-#define  MACH_PB1000		0	/* Au1000-based eval board */
-#define  MACH_PB1100		1	/* Au1100-based eval board */
-#define  MACH_PB1500		2	/* Au1500-based eval board */
-#define  MACH_DB1000		3       /* Au1000-based eval board */
-#define  MACH_DB1100		4       /* Au1100-based eval board */
-#define  MACH_DB1500		5       /* Au1500-based eval board */
-#define  MACH_XXS1500		6       /* Au1500-based eval board */
-#define  MACH_MTX1		7       /* 4G MTX-1 Au1500-based board */
-#define  MACH_PB1550		8       /* Au1550-based eval board */
-#define  MACH_DB1550		9       /* Au1550-based eval board */
-#define  MACH_PB1200		10       /* Au1200-based eval board */
-#define  MACH_DB1200		11       /* Au1200-based eval board */
-
-/*
- * Valid machtype for group NEC_VR41XX
- *
- * Various NEC-based devices.
- *
- * FIXME: MACH_GROUPs should be by _MANUFACTURER_ of * the device, not by
- *        technical properties, so no new additions to this group.
- */
-#define  MACH_NEC_OSPREY	0	/* Osprey eval board */
-#define  MACH_NEC_EAGLE		1	/* NEC Eagle/Hawk board */
-#define  MACH_ZAO_CAPCELLA	2	/* ZAO Networks Capcella */
-#define  MACH_VICTOR_MPC30X	3	/* Victor MP-C303/304 */
-#define  MACH_IBM_WORKPAD	4	/* IBM WorkPad z50 */
-#define  MACH_CASIO_E55		5	/* CASIO CASSIOPEIA E-10/15/55/65 */
-#define  MACH_TANBAC_TB0226	6	/* TANBAC TB0226 (Mbase) */
-#define  MACH_TANBAC_TB0229	7	/* TANBAC TB0229 (VR4131DIMM) */
-#define  MACH_NEC_CMBVR4133	8	/* CMB VR4133 Board */
-
-#define  MACH_HP_LASERJET	1
-
 /*
  * Valid machtype for group LASAT
  */
 #define  MACH_LASAT_100		0	/* Masquerade II/SP100/SP50/SP25 */
 #define  MACH_LASAT_200		1	/* Masquerade PRO/SP200 */
 
-/*
- * Valid machtype for group TITAN
- */
-#define  MACH_TITAN_YOSEMITE	1	/* PMC-Sierra Yosemite		*/
-#define  MACH_TITAN_EXCITE	2	/* Basler eXcite		*/
-
 /*
  * Valid machtype for group NEC EMMA2RH
  */
 #define  MACH_NEC_MARKEINS	0	/* NEC EMMA2RH Mark-eins	*/
 
-/*
- * Valid machtype for group LEMOTE
- */
-#define  MACH_LEMOTE_FULONG        0
-
 /*
  * Valid machtype for group PMC-MSP
  */
@@ -190,14 +94,6 @@
 #define MACH_MSP7120_FPGA       5	/* PMC-Sierra MSP7120 Emulation */
 #define MACH_MSP_OTHER        255	/* PMC-Sierra unknown board type */
 
-#define MACH_WRPPMC             1
-
-/*
- * Valid machtype for group Broadcom
- */
-#define MACH_GROUP_BRCM		23	/* Broadcom			*/
-#define  MACH_BCM47XX		1	/* Broadcom BCM47XX		*/
-
 #define CL_SIZE			COMMAND_LINE_SIZE
 
 const char *get_system_type(void);