Merge tag 'drm-intel-next-fixes-2016-05-25' of...

Merge tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel into drm-next

I see the main drm pull got merged, here's the first batch of fixes for
4.7 already. Fixes all around, a large portion cc: stable stuff.

[airlied: the DP++ stuff is a regression fix].
* tag 'drm-intel-next-fixes-2016-05-25' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Stop automatically retiring requests after a GPU hang
  drm/i915: Unify intel_ring_begin()
  drm/i915: Ignore stale wm register values on resume on ilk-bdw (v2)
  drm/i915/psr: Try to program link training times correctly
  drm/i915/bxt: Adjusting the error in horizontal timings retrieval
  drm/i915: Don't leave old junk in ilk active watermarks on readout
  drm/i915: s/DPPL/DPLL/ for SKL DPLLs
  drm/i915: Fix gen8 semaphores id for legacy mode
  drm/i915: Set crtc_state->lane_count for HDMI
  drm/i915/BXT: Retrieving the horizontal timing for DSI
  drm/i915: Protect gen7 irq_seqno_barrier with uncore lock
  drm/i915: Re-enable GGTT earlier during resume on pre-gen6 platforms
  drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT
  drm/i915: Enable/disable TMDS output buffers in DP++ adaptor as needed
  drm/i915: Respect DP++ adaptor TMDS clock limit
  drm: Add helper for DP++ adaptors

Documentation/DocBook/gpu.tmpl

@@ -1626,6 +1626,12 @@ void intel_crt_init(struct drm_device *dev)
 !Pdrivers/gpu/drm/drm_dp_helper.c dp helpers
 !Iinclude/drm/drm_dp_helper.h
 !Edrivers/gpu/drm/drm_dp_helper.c
+    </sect2>
+    <sect2>
+      <title>Display Port Dual Mode Adaptor Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_dp_dual_mode_helper.c dp dual mode helpers
+!Iinclude/drm/drm_dp_dual_mode_helper.h
+!Edrivers/gpu/drm/drm_dp_dual_mode_helper.c
     </sect2>
     <sect2>
       <title>Display Port MST Helper Functions Reference</title>

drivers/gpu/drm/Makefile

@@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o
 
 drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
-		drm_kms_helper_common.o
+		drm_kms_helper_common.o drm_dp_dual_mode_helper.o
 
 drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o

drivers/gpu/drm/drm_dp_dual_mode_helper.c

+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <drm/drm_dp_dual_mode_helper.h>
+#include <drm/drmP.h>
+
+/**
+ * DOC: dp dual mode helpers
+ *
+ * Helper functions to deal with DP dual mode (aka. DP++) adaptors.
+ *
+ * Type 1:
+ * Adaptor registers (if any) and the sink DDC bus may be accessed via I2C.
+ *
+ * Type 2:
+ * Adaptor registers and sink DDC bus can be accessed either via I2C or
+ * I2C-over-AUX. Source devices may choose to implement either of these
+ * access methods.
+ */
+
+#define DP_DUAL_MODE_SLAVE_ADDRESS 0x40
+
+/**
+ * drm_dp_dual_mode_read - Read from the DP dual mode adaptor register(s)
+ * @adapter: I2C adapter for the DDC bus
+ * @offset: register offset
+ * @buffer: buffer for return data
+ * @size: sizo of the buffer
+ *
+ * Reads @size bytes from the DP dual mode adaptor registers
+ * starting at @offset.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure
+ */
+ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter,
+			      u8 offset, void *buffer, size_t size)
+{
+	struct i2c_msg msgs[] = {
+		{
+			.addr = DP_DUAL_MODE_SLAVE_ADDRESS,
+			.flags = 0,
+			.len = 1,
+			.buf = &offset,
+		},
+		{
+			.addr = DP_DUAL_MODE_SLAVE_ADDRESS,
+			.flags = I2C_M_RD,
+			.len = size,
+			.buf = buffer,
+		},
+	};
+	int ret;
+
+	ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	if (ret != ARRAY_SIZE(msgs))
+		return -EPROTO;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_dual_mode_read);
+
+/**
+ * drm_dp_dual_mode_write - Write to the DP dual mode adaptor register(s)
+ * @adapter: I2C adapter for the DDC bus
+ * @offset: register offset
+ * @buffer: buffer for write data
+ * @size: sizo of the buffer
+ *
+ * Writes @size bytes to the DP dual mode adaptor registers
+ * starting at @offset.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure
+ */
+ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter,
+			       u8 offset, const void *buffer, size_t size)
+{
+	struct i2c_msg msg = {
+		.addr = DP_DUAL_MODE_SLAVE_ADDRESS,
+		.flags = 0,
+		.len = 1 + size,
+		.buf = NULL,
+	};
+	void *data;
+	int ret;
+
+	data = kmalloc(msg.len, GFP_TEMPORARY);
+	if (!data)
+		return -ENOMEM;
+
+	msg.buf = data;
+
+	memcpy(data, &offset, 1);
+	memcpy(data + 1, buffer, size);
+
+	ret = i2c_transfer(adapter, &msg, 1);
+
+	kfree(data);
+
+	if (ret < 0)
+		return ret;
+	if (ret != 1)
+		return -EPROTO;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_dual_mode_write);
+
+static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN])
+{
+	static const char dp_dual_mode_hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] =
+		"DP-HDMI ADAPTOR\x04";
+
+	return memcmp(hdmi_id, dp_dual_mode_hdmi_id,
+		      sizeof(dp_dual_mode_hdmi_id)) == 0;
+}
+
+static bool is_type2_adaptor(uint8_t adaptor_id)
+{
+	return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 |
+			      DP_DUAL_MODE_REV_TYPE2);
+}
+
+/**
+ * drm_dp_dual_mode_detect - Identify the DP dual mode adaptor
+ * @adapter: I2C adapter for the DDC bus
+ *
+ * Attempt to identify the type of the DP dual mode adaptor used.
+ *
+ * Note that when the answer is @DRM_DP_DUAL_MODE_UNKNOWN it's not
+ * certain whether we're dealing with a native HDMI port or
+ * a type 1 DVI dual mode adaptor. The driver will have to use
+ * some other hardware/driver specific mechanism to make that
+ * distinction.
+ *
+ * Returns:
+ * The type of the DP dual mode adaptor used
+ */
+enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
+{
+	char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = {};
+	uint8_t adaptor_id = 0x00;
+	ssize_t ret;
+
+	/*
+	 * Let's see if the adaptor is there the by reading the
+	 * HDMI ID registers.
+	 *
+	 * Note that type 1 DVI adaptors are not required to implemnt
+	 * any registers, and that presents a problem for detection.
+	 * If the i2c transfer is nacked, we may or may not be dealing
+	 * with a type 1 DVI adaptor. Some other mechanism of detecting
+	 * the presence of the adaptor is required. One way would be
+	 * to check the state of the CONFIG1 pin, Another method would
+	 * simply require the driver to know whether the port is a DP++
+	 * port or a native HDMI port. Both of these methods are entirely
+	 * hardware/driver specific so we can't deal with them here.
+	 */
+	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
+				    hdmi_id, sizeof(hdmi_id));
+	if (ret)
+		return DRM_DP_DUAL_MODE_UNKNOWN;
+
+	/*
+	 * Sigh. Some (maybe all?) type 1 adaptors are broken and ack
+	 * the offset but ignore it, and instead they just always return
+	 * data from the start of the HDMI ID buffer. So for a broken
+	 * type 1 HDMI adaptor a single byte read will always give us
+	 * 0x44, and for a type 1 DVI adaptor it should give 0x00
+	 * (assuming it implements any registers). Fortunately neither
+	 * of those values will match the type 2 signature of the
+	 * DP_DUAL_MODE_ADAPTOR_ID register so we can proceed with
+	 * the type 2 adaptor detection safely even in the presence
+	 * of broken type 1 adaptors.
+	 */
+	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
+				    &adaptor_id, sizeof(adaptor_id));
+	if (ret == 0) {
+		if (is_type2_adaptor(adaptor_id)) {
+			if (is_hdmi_adaptor(hdmi_id))
+				return DRM_DP_DUAL_MODE_TYPE2_HDMI;
+			else
+				return DRM_DP_DUAL_MODE_TYPE2_DVI;
+		}
+	}
+
+	if (is_hdmi_adaptor(hdmi_id))
+		return DRM_DP_DUAL_MODE_TYPE1_HDMI;
+	else
+		return DRM_DP_DUAL_MODE_TYPE1_DVI;
+}
+EXPORT_SYMBOL(drm_dp_dual_mode_detect);
+
+/**
+ * drm_dp_dual_mode_max_tmds_clock - Max TMDS clock for DP dual mode adaptor
+ * @type: DP dual mode adaptor type
+ * @adapter: I2C adapter for the DDC bus
+ *
+ * Determine the max TMDS clock the adaptor supports based on the
+ * type of the dual mode adaptor and the DP_DUAL_MODE_MAX_TMDS_CLOCK
+ * register (on type2 adaptors). As some type 1 adaptors have
+ * problems with registers (see comments in drm_dp_dual_mode_detect())
+ * we don't read the register on those, instead we simply assume
+ * a 165 MHz limit based on the specification.
+ *
+ * Returns:
+ * Maximum supported TMDS clock rate for the DP dual mode adaptor in kHz.
+ */
+int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type,
+				    struct i2c_adapter *adapter)
+{
+	uint8_t max_tmds_clock;
+	ssize_t ret;
+
+	/* native HDMI so no limit */
+	if (type == DRM_DP_DUAL_MODE_NONE)
+		return 0;
+
+	/*
+	 * Type 1 adaptors are limited to 165MHz
+	 * Type 2 adaptors can tells us their limit
+	 */
+	if (type < DRM_DP_DUAL_MODE_TYPE2_DVI)
+		return 165000;
+
+	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_MAX_TMDS_CLOCK,
+				    &max_tmds_clock, sizeof(max_tmds_clock));
+	if (ret || max_tmds_clock == 0x00 || max_tmds_clock == 0xff) {
+		DRM_DEBUG_KMS("Failed to query max TMDS clock\n");
+		return 165000;
+	}
+
+	return max_tmds_clock * 5000 / 2;
+}
+EXPORT_SYMBOL(drm_dp_dual_mode_max_tmds_clock);
+
+/**
+ * drm_dp_dual_mode_get_tmds_output - Get the state of the TMDS output buffers in the DP dual mode adaptor
+ * @type: DP dual mode adaptor type
+ * @adapter: I2C adapter for the DDC bus
+ * @enabled: current state of the TMDS output buffers
+ *
+ * Get the state of the TMDS output buffers in the adaptor. For
+ * type2 adaptors this is queried from the DP_DUAL_MODE_TMDS_OEN
+ * register. As some type 1 adaptors have problems with registers
+ * (see comments in drm_dp_dual_mode_detect()) we don't read the
+ * register on those, instead we simply assume that the buffers
+ * are always enabled.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure
+ */
+int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
+				     struct i2c_adapter *adapter,
+				     bool *enabled)
+{
+	uint8_t tmds_oen;
+	ssize_t ret;
+
+	if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) {
+		*enabled = true;
+		return 0;
+	}
+
+	ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN,
+				    &tmds_oen, sizeof(tmds_oen));
+	if (ret) {
+		DRM_DEBUG_KMS("Failed to query state of TMDS output buffers\n");
+		return ret;
+	}
+
+	*enabled = !(tmds_oen & DP_DUAL_MODE_TMDS_DISABLE);
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_dual_mode_get_tmds_output);
+
+/**
+ * drm_dp_dual_mode_set_tmds_output - Enable/disable TMDS output buffers in the DP dual mode adaptor
+ * @type: DP dual mode adaptor type
+ * @adapter: I2C adapter for the DDC bus
+ * @enable: enable (as opposed to disable) the TMDS output buffers
+ *
+ * Set the state of the TMDS output buffers in the adaptor. For
+ * type2 this is set via the DP_DUAL_MODE_TMDS_OEN register. As
+ * some type 1 adaptors have problems with registers (see comments
+ * in drm_dp_dual_mode_detect()) we avoid touching the register,
+ * making this function a no-op on type 1 adaptors.
+ *
+ * Returns:
+ * 0 on success, negative error code on failure
+ */
+int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type,
+				     struct i2c_adapter *adapter, bool enable)
+{
+	uint8_t tmds_oen = enable ? 0 : DP_DUAL_MODE_TMDS_DISABLE;
+	ssize_t ret;
+
+	if (type < DRM_DP_DUAL_MODE_TYPE2_DVI)
+		return 0;
+
+	ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN,
+				     &tmds_oen, sizeof(tmds_oen));
+	if (ret) {
+		DRM_DEBUG_KMS("Failed to %s TMDS output buffers\n",
+			      enable ? "enable" : "disable");
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_dp_dual_mode_set_tmds_output);
+
+/**
+ * drm_dp_get_dual_mode_type_name - Get the name of the DP dual mode adaptor type as a string
+ * @type: DP dual mode adaptor type
+ *
+ * Returns:
+ * String representation of the DP dual mode adaptor type
+ */
+const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type)
+{
+	switch (type) {
+	case DRM_DP_DUAL_MODE_NONE:
+		return "none";
+	case DRM_DP_DUAL_MODE_TYPE1_DVI:
+		return "type 1 DVI";
+	case DRM_DP_DUAL_MODE_TYPE1_HDMI:
+		return "type 1 HDMI";
+	case DRM_DP_DUAL_MODE_TYPE2_DVI:
+		return "type 2 DVI";
+	case DRM_DP_DUAL_MODE_TYPE2_HDMI:
+		return "type 2 HDMI";
+	default:
+		WARN_ON(type != DRM_DP_DUAL_MODE_UNKNOWN);
+		return "unknown";
+	}
+}
+EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name);

drivers/gpu/drm/i915/i915_dma.c

@@ -1183,6 +1183,12 @@ static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
 	if (ret)
 		return ret;
 
+	ret = i915_ggtt_enable_hw(dev);
+	if (ret) {
+		DRM_ERROR("failed to enable GGTT\n");
+		goto out_ggtt;
+	}
+
 	/* WARNING: Apparently we must kick fbdev drivers before vgacon,
 	 * otherwise the vga fbdev driver falls over. */
 	ret = i915_kick_out_firmware_fb(dev_priv);

drivers/gpu/drm/i915/i915_drv.c

@@ -734,9 +734,14 @@ int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state)
 static int i915_drm_resume(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret;
 
 	disable_rpm_wakeref_asserts(dev_priv);
 
+	ret = i915_ggtt_enable_hw(dev);
+	if (ret)
+		DRM_ERROR("failed to re-enable GGTT\n");
+
 	intel_csr_ucode_resume(dev_priv);
 
 	mutex_lock(&dev->struct_mutex);

drivers/gpu/drm/i915/i915_drv.h

@@ -3482,6 +3482,7 @@ bool intel_bios_is_valid_vbt(const void *buf, size_t size);
 bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv);
 bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin);
 bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
+bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port);
 bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
 bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
 				     enum port port);

drivers/gpu/drm/i915/i915_gem.c

@@ -1456,7 +1456,10 @@ i915_wait_request(struct drm_i915_gem_request *req)
 	if (ret)
 		return ret;
 
+	/* If the GPU hung, we want to keep the requests to find the guilty. */
+	if (req->reset_counter == i915_reset_counter(&dev_priv->gpu_error))
 		__i915_gem_request_retire__upto(req);
+
 	return 0;
 }
 
@@ -1513,6 +1516,7 @@ i915_gem_object_retire_request(struct drm_i915_gem_object *obj,
 	else if (obj->last_write_req == req)
 		i915_gem_object_retire__write(obj);
 
+	if (req->reset_counter == i915_reset_counter(&req->i915->gpu_error))
 		__i915_gem_request_retire__upto(req);
 }
 
@@ -4860,9 +4864,6 @@ i915_gem_init_hw(struct drm_device *dev)
 	struct intel_engine_cs *engine;
 	int ret, j;
 
-	if (INTEL_INFO(dev)->gen < 6 && !intel_enable_gtt())
-		return -EIO;
-
 	/* Double layer security blanket, see i915_gem_init() */
 	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
 

drivers/gpu/drm/i915/i915_gem_gtt.c

@@ -3236,6 +3236,14 @@ int i915_ggtt_init_hw(struct drm_device *dev)
 	return ret;
 }
 
+int i915_ggtt_enable_hw(struct drm_device *dev)
+{
+	if (INTEL_INFO(dev)->gen < 6 && !intel_enable_gtt())
+		return -EIO;
+
+	return 0;
+}
+
 void i915_gem_restore_gtt_mappings(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);

drivers/gpu/drm/i915/i915_gem_gtt.h

@@ -514,6 +514,7 @@ i915_page_dir_dma_addr(const struct i915_hw_ppgtt *ppgtt, const unsigned n)
 }
 
 int i915_ggtt_init_hw(struct drm_device *dev);
+int i915_ggtt_enable_hw(struct drm_device *dev);
 void i915_gem_init_ggtt(struct drm_device *dev);
 void i915_ggtt_cleanup_hw(struct drm_device *dev);
 

drivers/gpu/drm/i915/intel_bios.c

@@ -1578,6 +1578,42 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port)
 	return false;
 }
 
+bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port)
+{
+	static const struct {
+		u16 dp, hdmi;
+	} port_mapping[] = {
+		/*
+		 * Buggy VBTs may declare DP ports as having
+		 * HDMI type dvo_port :( So let's check both.
+		 */
+		[PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
+		[PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
+		[PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
+		[PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+	};
+	int i;
+
+	if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
+		return false;
+
+	if (!dev_priv->vbt.child_dev_num)
+		return false;
+
+	for (i = 0; i < dev_priv->vbt.child_dev_num; i++) {
+		const union child_device_config *p_child =
+			&dev_priv->vbt.child_dev[i];
+
+		if ((p_child->common.dvo_port == port_mapping[port].dp ||
+		     p_child->common.dvo_port == port_mapping[port].hdmi) &&
+		    (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) ==
+		    (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
+			return true;
+	}
+
+	return false;
+}
+
 /**
  * intel_bios_is_dsi_present - is DSI present in VBT
  * @dev_priv:	i915 device instance

drivers/gpu/drm/i915/intel_ddi.c

@@ -1601,6 +1601,12 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 	enum port port = intel_ddi_get_encoder_port(intel_encoder);
 	int type = intel_encoder->type;
 
+	if (type == INTEL_OUTPUT_HDMI) {
+		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+		intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
+	}
+
 	intel_prepare_ddi_buffer(intel_encoder);
 
 	if (type == INTEL_OUTPUT_EDP) {
@@ -1667,6 +1673,12 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
 					DPLL_CTRL2_DDI_CLK_OFF(port)));
 	else if (INTEL_INFO(dev)->gen < 9)
 		I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
+
+	if (type == INTEL_OUTPUT_HDMI) {
+		struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
+
+		intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
+	}
 }
 
 static void intel_enable_ddi(struct intel_encoder *intel_encoder)
@@ -2180,8 +2192,10 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
 
 		if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config))
 			pipe_config->has_infoframe = true;
-		break;
+		/* fall through */
 	case TRANS_DDI_MODE_SELECT_DVI:
+		pipe_config->lane_count = 4;
+		break;
 	case TRANS_DDI_MODE_SELECT_FDI:
 		break;
 	case TRANS_DDI_MODE_SELECT_DP_SST:

drivers/gpu/drm/i915/intel_display.c

@@ -12005,6 +12005,9 @@ static int intel_crtc_atomic_check(struct drm_crtc *crtc,
 			DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n");
 			return ret;
 		}
+	} else if (dev_priv->display.compute_intermediate_wm) {
+		if (HAS_PCH_SPLIT(dev_priv) && INTEL_GEN(dev_priv) < 9)
+			pipe_config->wm.intermediate = pipe_config->wm.optimal.ilk;
 	}
 
 	if (INTEL_INFO(dev)->gen >= 9) {
@@ -15990,6 +15993,9 @@ void intel_display_resume(struct drm_device *dev)
 
 		state->acquire_ctx = &ctx;
 
+		/* ignore any reset values/BIOS leftovers in the WM registers */
+		to_intel_atomic_state(state)->skip_intermediate_wm = true;
+
 		for_each_crtc_in_state(state, crtc, crtc_state, i) {
 			/*
 			 * Force recalculation even if we restore

drivers/gpu/drm/i915/intel_dpll_mgr.c

@@ -1702,9 +1702,9 @@ static const struct intel_dpll_mgr hsw_pll_mgr = {
 
 static const struct dpll_info skl_plls[] = {
 	{ "DPLL 0", DPLL_ID_SKL_DPLL0, &skl_ddi_dpll0_funcs, INTEL_DPLL_ALWAYS_ON },
-	{ "DPPL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs,   0 },
-	{ "DPPL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs,   0 },
-	{ "DPPL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs,   0 },
+	{ "DPLL 1", DPLL_ID_SKL_DPLL1, &skl_ddi_pll_funcs,   0 },
+	{ "DPLL 2", DPLL_ID_SKL_DPLL2, &skl_ddi_pll_funcs,   0 },
+	{ "DPLL 3", DPLL_ID_SKL_DPLL3, &skl_ddi_pll_funcs,   0 },
 	{ NULL, -1, NULL, },
 };
 

drivers/gpu/drm/i915/intel_drv.h

@@ -33,6 +33,7 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_dp_dual_mode_helper.h>
 #include <drm/drm_dp_mst_helper.h>
 #include <drm/drm_rect.h>
 #include <drm/drm_atomic.h>
@@ -753,6 +754,10 @@ struct cxsr_latency {
 struct intel_hdmi {
 	i915_reg_t hdmi_reg;
 	int ddc_bus;
+	struct {
+		enum drm_dp_dual_mode_type type;
+		int max_tmds_clock;
+	} dp_dual_mode;
 	bool limited_color_range;
 	bool color_range_auto;
 	bool has_hdmi_sink;
@@ -1401,6 +1406,7 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
 struct intel_hdmi *enc_to_intel_hdmi(struct drm_encoder *encoder);
 bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 			       struct intel_crtc_state *pipe_config);
+void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable);
 
 
 /* intel_lvds.c */

drivers/gpu/drm/i915/intel_dsi.c

@@ -46,6 +46,22 @@ static const struct {
 	},
 };
 
+/* return pixels in terms of txbyteclkhs */
+static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
+		       u16 burst_mode_ratio)
+{
+	return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
+					 8 * 100), lane_count);
+}
+
+/* return pixels equvalent to txbyteclkhs */
+static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count,
+			u16 burst_mode_ratio)
+{
+	return DIV_ROUND_UP((clk_hs * lane_count * 8 * 100),
+						(bpp * burst_mode_ratio));
+}
+
 enum mipi_dsi_pixel_format pixel_format_from_register_bits(u32 fmt)
 {
 	/* It just so happens the VBT matches register contents. */
@@ -780,10 +796,19 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_display_mode *adjusted_mode =
 					&pipe_config->base.adjusted_mode;
+	struct drm_display_mode *adjusted_mode_sw;
+	struct intel_crtc *intel_crtc;
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base);
+	unsigned int lane_count = intel_dsi->lane_count;
 	unsigned int bpp, fmt;
 	enum port port;
-	u16 vfp, vsync, vbp;
+	u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp;
+	u16 hfp_sw, hsync_sw, hbp_sw;
+	u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw,
+				crtc_hblank_start_sw, crtc_hblank_end_sw;
+
+	intel_crtc = to_intel_crtc(encoder->base.crtc);
+	adjusted_mode_sw = &intel_crtc->config->base.adjusted_mode;
 
 	/*
 	 * Atleast one port is active as encoder->get_config called only if
@@ -808,26 +833,118 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder,
 	adjusted_mode->crtc_vtotal =
 				I915_READ(BXT_MIPI_TRANS_VTOTAL(port));
 
+	hactive = adjusted_mode->crtc_hdisplay;
+	hfp = I915_READ(MIPI_HFP_COUNT(port));
+
 	/*
-	 * TODO: Retrieve hfp, hsync and hbp. Adjust them for dual link and
-	 * calculate hsync_start, hsync_end, htotal and hblank_end
+	 * Meaningful for video mode non-burst sync pulse mode only,
+	 * can be zero for non-burst sync events and burst modes
 	 */
+	hsync = I915_READ(MIPI_HSYNC_PADDING_COUNT(port));
+	hbp = I915_READ(MIPI_HBP_COUNT(port));
+
+	/* harizontal values are in terms of high speed byte clock */
+	hfp = pixels_from_txbyteclkhs(hfp, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+	hsync = pixels_from_txbyteclkhs(hsync, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+	hbp = pixels_from_txbyteclkhs(hbp, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+
+	if (intel_dsi->dual_link) {
+		hfp *= 2;
+		hsync *= 2;
+		hbp *= 2;
+	}
 
 	/* vertical values are in terms of lines */
 	vfp = I915_READ(MIPI_VFP_COUNT(port));
 	vsync = I915_READ(MIPI_VSYNC_PADDING_COUNT(port));
 	vbp = I915_READ(MIPI_VBP_COUNT(port));
 
+	adjusted_mode->crtc_htotal = hactive + hfp + hsync + hbp;
+	adjusted_mode->crtc_hsync_start = hfp + adjusted_mode->crtc_hdisplay;
+	adjusted_mode->crtc_hsync_end = hsync + adjusted_mode->crtc_hsync_start;
 	adjusted_mode->crtc_hblank_start = adjusted_mode->crtc_hdisplay;
+	adjusted_mode->crtc_hblank_end = adjusted_mode->crtc_htotal;
 
-	adjusted_mode->crtc_vsync_start =
-				vfp + adjusted_mode->crtc_vdisplay;
-	adjusted_mode->crtc_vsync_end =
-				vsync + adjusted_mode->crtc_vsync_start;
+	adjusted_mode->crtc_vsync_start = vfp + adjusted_mode->crtc_vdisplay;
+	adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start;
 	adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay;
 	adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal;
-}
 
+	/*
+	 * In BXT DSI there is no regs programmed with few horizontal timings
+	 * in Pixels but txbyteclkhs.. So retrieval process adds some
+	 * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs.
+	 * Actually here for the given adjusted_mode, we are calculating the
+	 * value programmed to the port and then back to the horizontal timing
+	 * param in pixels. This is the expected value, including roundup errors
+	 * And if that is same as retrieved value from port, then
+	 * (HW state) adjusted_mode's horizontal timings are corrected to
+	 * match with SW state to nullify the errors.
+	 */
+	/* Calculating the value programmed to the Port register */
+	hfp_sw = adjusted_mode_sw->crtc_hsync_start -
+					adjusted_mode_sw->crtc_hdisplay;
+	hsync_sw = adjusted_mode_sw->crtc_hsync_end -
+					adjusted_mode_sw->crtc_hsync_start;
+	hbp_sw = adjusted_mode_sw->crtc_htotal -
+					adjusted_mode_sw->crtc_hsync_end;
+
+	if (intel_dsi->dual_link) {
+		hfp_sw /= 2;
+		hsync_sw /= 2;
+		hbp_sw /= 2;
+	}
+
+	hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+	hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count,
+			    intel_dsi->burst_mode_ratio);
+	hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+
+	/* Reverse calculating the adjusted mode parameters from port reg vals*/
+	hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+	hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+	hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count,
+						intel_dsi->burst_mode_ratio);
+
+	if (intel_dsi->dual_link) {
+		hfp_sw *= 2;
+		hsync_sw *= 2;
+		hbp_sw *= 2;
+	}
+
+	crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw +
+							hsync_sw + hbp_sw;
+	crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay;
+	crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw;
+	crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay;
+	crtc_hblank_end_sw = crtc_htotal_sw;
+
+	if (adjusted_mode->crtc_htotal == crtc_htotal_sw)
+		adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal;
+
+	if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw)
+		adjusted_mode->crtc_hsync_start =
+					adjusted_mode_sw->crtc_hsync_start;
+
+	if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw)
+		adjusted_mode->crtc_hsync_end =
+					adjusted_mode_sw->crtc_hsync_end;
+
+	if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw)
+		adjusted_mode->crtc_hblank_start =
+					adjusted_mode_sw->crtc_hblank_start;
+
+	if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw)
+		adjusted_mode->crtc_hblank_end =
+					adjusted_mode_sw->crtc_hblank_end;
+}
 
 static void intel_dsi_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_state *pipe_config)
@@ -891,14 +1008,6 @@ static u16 txclkesc(u32 divider, unsigned int us)
 	}
 }
 
-/* return pixels in terms of txbyteclkhs */
-static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
-		       u16 burst_mode_ratio)
-{
-	return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio,
-					 8 * 100), lane_count);
-}
-
 static void set_dsi_timings(struct drm_encoder *encoder,
 			    const struct drm_display_mode *adjusted_mode)
 {

drivers/gpu/drm/i915/intel_hdmi.c

@@ -836,6 +836,22 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
 	intel_hdmi_set_hdmi_infoframe(encoder, adjusted_mode);
 }
 
+void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
+	struct i2c_adapter *adapter =
+		intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
+
+	if (hdmi->dp_dual_mode.type < DRM_DP_DUAL_MODE_TYPE2_DVI)
+		return;
+
+	DRM_DEBUG_KMS("%s DP dual mode adaptor TMDS output\n",
+		      enable ? "Enabling" : "Disabling");
+
+	drm_dp_dual_mode_set_tmds_output(hdmi->dp_dual_mode.type,
+					 adapter, enable);
+}
+
 static void intel_hdmi_prepare(struct intel_encoder *encoder)
 {
 	struct drm_device *dev = encoder->base.dev;
@@ -845,6 +861,8 @@ static void intel_hdmi_prepare(struct intel_encoder *encoder)
 	const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
 	u32 hdmi_val;
 
+	intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
+
 	hdmi_val = SDVO_ENCODING_HDMI;
 	if (!HAS_PCH_SPLIT(dev) && crtc->config->limited_color_range)
 		hdmi_val |= HDMI_COLOR_RANGE_16_235;
@@ -953,6 +971,8 @@ static void intel_hdmi_get_config(struct intel_encoder *encoder,
 		dotclock /= pipe_config->pixel_multiplier;
 
 	pipe_config->base.adjusted_mode.crtc_clock = dotclock;
+
+	pipe_config->lane_count = 4;
 }
 
 static void intel_enable_hdmi_audio(struct intel_encoder *encoder)
@@ -1140,6 +1160,8 @@ static void intel_disable_hdmi(struct intel_encoder *encoder)
 	}
 
 	intel_hdmi->set_infoframes(&encoder->base, false, NULL);
+
+	intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
 }
 
 static void g4x_disable_hdmi(struct intel_encoder *encoder)
@@ -1165,27 +1187,42 @@ static void pch_post_disable_hdmi(struct intel_encoder *encoder)
 	intel_disable_hdmi(encoder);
 }
 
-static int hdmi_port_clock_limit(struct intel_hdmi *hdmi, bool respect_dvi_limit)
+static int intel_hdmi_source_max_tmds_clock(struct drm_i915_private *dev_priv)
 {
-	struct drm_device *dev = intel_hdmi_to_dev(hdmi);
-
-	if ((respect_dvi_limit && !hdmi->has_hdmi_sink) || IS_G4X(dev))
+	if (IS_G4X(dev_priv))
 		return 165000;
-	else if (IS_HASWELL(dev) || INTEL_INFO(dev)->gen >= 8)
+	else if (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)
 		return 300000;
 	else
 		return 225000;
 }
 
+static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
+				 bool respect_downstream_limits)
+{
+	struct drm_device *dev = intel_hdmi_to_dev(hdmi);
+	int max_tmds_clock = intel_hdmi_source_max_tmds_clock(to_i915(dev));
+
+	if (respect_downstream_limits) {
+		if (hdmi->dp_dual_mode.max_tmds_clock)
+			max_tmds_clock = min(max_tmds_clock,
+					     hdmi->dp_dual_mode.max_tmds_clock);
+		if (!hdmi->has_hdmi_sink)
+			max_tmds_clock = min(max_tmds_clock, 165000);
+	}
+
+	return max_tmds_clock;
+}
+
 static enum drm_mode_status
 hdmi_port_clock_valid(struct intel_hdmi *hdmi,
-		      int clock, bool respect_dvi_limit)
+		      int clock, bool respect_downstream_limits)
 {
 	struct drm_device *dev = intel_hdmi_to_dev(hdmi);
 
 	if (clock < 25000)
 		return MODE_CLOCK_LOW;
-	if (clock > hdmi_port_clock_limit(hdmi, respect_dvi_limit))
+	if (clock > hdmi_port_clock_limit(hdmi, respect_downstream_limits))
 		return MODE_CLOCK_HIGH;
 
 	/* BXT DPLL can't generate 223-240 MHz */
@@ -1309,7 +1346,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	 * within limits.
 	 */
 	if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink &&
-	    hdmi_port_clock_valid(intel_hdmi, clock_12bpc, false) == MODE_OK &&
+	    hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true) == MODE_OK &&
 	    hdmi_12bpc_possible(pipe_config)) {
 		DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
 		desired_bpp = 12*3;
@@ -1337,6 +1374,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
 	/* Set user selected PAR to incoming mode's member */
 	adjusted_mode->picture_aspect_ratio = intel_hdmi->aspect_ratio;
 
+	pipe_config->lane_count = 4;
+
 	return true;
 }
 
@@ -1349,10 +1388,57 @@ intel_hdmi_unset_edid(struct drm_connector *connector)
 	intel_hdmi->has_audio = false;
 	intel_hdmi->rgb_quant_range_selectable = false;
 
+	intel_hdmi->dp_dual_mode.type = DRM_DP_DUAL_MODE_NONE;
+	intel_hdmi->dp_dual_mode.max_tmds_clock = 0;
+
 	kfree(to_intel_connector(connector)->detect_edid);
 	to_intel_connector(connector)->detect_edid = NULL;
 }
 
+static void
+intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
+{
+	struct drm_i915_private *dev_priv = to_i915(connector->dev);
+	struct intel_hdmi *hdmi = intel_attached_hdmi(connector);
+	enum port port = hdmi_to_dig_port(hdmi)->port;
+	struct i2c_adapter *adapter =
+		intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
+	enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
+
+	/*
+	 * Type 1 DVI adaptors are not required to implement any
+	 * registers, so we can't always detect their presence.
+	 * Ideally we should be able to check the state of the
+	 * CONFIG1 pin, but no such luck on our hardware.
+	 *
+	 * The only method left to us is to check the VBT to see
+	 * if the port is a dual mode capable DP port. But let's
+	 * only do that when we sucesfully read the EDID, to avoid
+	 * confusing log messages about DP dual mode adaptors when
+	 * there's nothing connected to the port.
+	 */
+	if (type == DRM_DP_DUAL_MODE_UNKNOWN) {
+		if (has_edid &&
+		    intel_bios_is_port_dp_dual_mode(dev_priv, port)) {
+			DRM_DEBUG_KMS("Assuming DP dual mode adaptor presence based on VBT\n");
+			type = DRM_DP_DUAL_MODE_TYPE1_DVI;
+		} else {
+			type = DRM_DP_DUAL_MODE_NONE;
+		}
+	}
+
+	if (type == DRM_DP_DUAL_MODE_NONE)
+		return;
+
+	hdmi->dp_dual_mode.type = type;
+	hdmi->dp_dual_mode.max_tmds_clock =
+		drm_dp_dual_mode_max_tmds_clock(type, adapter);
+
+	DRM_DEBUG_KMS("DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n",
+		      drm_dp_get_dual_mode_type_name(type),
+		      hdmi->dp_dual_mode.max_tmds_clock);
+}
+
 static bool
 intel_hdmi_set_edid(struct drm_connector *connector, bool force)
 {
@@ -1368,6 +1454,8 @@ intel_hdmi_set_edid(struct drm_connector *connector, bool force)
 				    intel_gmbus_get_adapter(dev_priv,
 				    intel_hdmi->ddc_bus));
 
+		intel_hdmi_dp_dual_mode_detect(connector, edid != NULL);
+
 		intel_display_power_put(dev_priv, POWER_DOMAIN_GMBUS);
 	}
 

drivers/gpu/drm/i915/intel_lrc.c

@@ -721,48 +721,6 @@ int intel_logical_ring_alloc_request_extras(struct drm_i915_gem_request *request
 	return ret;
 }
 
-static int logical_ring_wait_for_space(struct drm_i915_gem_request *req,
-				       int bytes)
-{
-	struct intel_ringbuffer *ringbuf = req->ringbuf;
-	struct intel_engine_cs *engine = req->engine;
-	struct drm_i915_gem_request *target;
-	unsigned space;
-	int ret;
-
-	if (intel_ring_space(ringbuf) >= bytes)
-		return 0;
-
-	/* The whole point of reserving space is to not wait! */
-	WARN_ON(ringbuf->reserved_in_use);
-
-	list_for_each_entry(target, &engine->request_list, list) {
-		/*
-		 * The request queue is per-engine, so can contain requests
-		 * from multiple ringbuffers. Here, we must ignore any that
-		 * aren't from the ringbuffer we're considering.
-		 */
-		if (target->ringbuf != ringbuf)
-			continue;
-
-		/* Would completion of this request free enough space? */
-		space = __intel_ring_space(target->postfix, ringbuf->tail,
-					   ringbuf->size);
-		if (space >= bytes)
-			break;
-	}
-
-	if (WARN_ON(&target->list == &engine->request_list))
-		return -ENOSPC;
-
-	ret = i915_wait_request(target);
-	if (ret)
-		return ret;
-
-	ringbuf->space = space;
-	return 0;
-}
-
 /*
  * intel_logical_ring_advance_and_submit() - advance the tail and submit the workload
  * @request: Request to advance the logical ringbuffer of.
@@ -814,92 +772,6 @@ intel_logical_ring_advance_and_submit(struct drm_i915_gem_request *request)
 	return 0;
 }
 
-static void __wrap_ring_buffer(struct intel_ringbuffer *ringbuf)
-{
-	uint32_t __iomem *virt;
-	int rem = ringbuf->size - ringbuf->tail;
-
-	virt = ringbuf->virtual_start + ringbuf->tail;
-	rem /= 4;
-	while (rem--)
-		iowrite32(MI_NOOP, virt++);
-
-	ringbuf->tail = 0;
-	intel_ring_update_space(ringbuf);
-}
-
-static int logical_ring_prepare(struct drm_i915_gem_request *req, int bytes)
-{
-	struct intel_ringbuffer *ringbuf = req->ringbuf;
-	int remain_usable = ringbuf->effective_size - ringbuf->tail;
-	int remain_actual = ringbuf->size - ringbuf->tail;
-	int ret, total_bytes, wait_bytes = 0;
-	bool need_wrap = false;
-
-	if (ringbuf->reserved_in_use)
-		total_bytes = bytes;
-	else
-		total_bytes = bytes + ringbuf->reserved_size;
-
-	if (unlikely(bytes > remain_usable)) {
-		/*
-		 * Not enough space for the basic request. So need to flush
-		 * out the remainder and then wait for base + reserved.
-		 */
-		wait_bytes = remain_actual + total_bytes;
-		need_wrap = true;
-	} else {
-		if (unlikely(total_bytes > remain_usable)) {
-			/*
-			 * The base request will fit but the reserved space
-			 * falls off the end. So don't need an immediate wrap
-			 * and only need to effectively wait for the reserved
-			 * size space from the start of ringbuffer.
-			 */
-			wait_bytes = remain_actual + ringbuf->reserved_size;
-		} else if (total_bytes > ringbuf->space) {
-			/* No wrapping required, just waiting. */
-			wait_bytes = total_bytes;
-		}
-	}
-
-	if (wait_bytes) {
-		ret = logical_ring_wait_for_space(req, wait_bytes);
-		if (unlikely(ret))
-			return ret;
-
-		if (need_wrap)
-			__wrap_ring_buffer(ringbuf);
-	}
-
-	return 0;
-}
-
-/**
- * intel_logical_ring_begin() - prepare the logical ringbuffer to accept some commands
- *
- * @req: The request to start some new work for
- * @num_dwords: number of DWORDs that we plan to write to the ringbuffer.
- *
- * The ringbuffer might not be ready to accept the commands right away (maybe it needs to
- * be wrapped, or wait a bit for the tail to be updated). This function takes care of that
- * and also preallocates a request (every workload submission is still mediated through
- * requests, same as it did with legacy ringbuffer submission).
- *
- * Return: non-zero if the ringbuffer is not ready to be written to.
- */
-int intel_logical_ring_begin(struct drm_i915_gem_request *req, int num_dwords)
-{
-	int ret;
-
-	ret = logical_ring_prepare(req, num_dwords * sizeof(uint32_t));
-	if (ret)
-		return ret;
-
-	req->ringbuf->space -= num_dwords * sizeof(uint32_t);
-	return 0;
-}
-
 int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request)
 {
 	/*
@@ -912,7 +784,7 @@ int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request)
 	 */
 	intel_ring_reserved_space_reserve(request->ringbuf, MIN_SPACE_FOR_ADD_REQUEST);
 
-	return intel_logical_ring_begin(request, 0);
+	return intel_ring_begin(request, 0);
 }
 
 /**
@@ -982,7 +854,7 @@ int intel_execlists_submission(struct i915_execbuffer_params *params,
 
 	if (engine == &dev_priv->engine[RCS] &&
 	    instp_mode != dev_priv->relative_constants_mode) {
-		ret = intel_logical_ring_begin(params->request, 4);
+		ret = intel_ring_begin(params->request, 4);
 		if (ret)
 			return ret;
 
@@ -1178,7 +1050,7 @@ static int intel_logical_ring_workarounds_emit(struct drm_i915_gem_request *req)
 	if (ret)
 		return ret;
 
-	ret = intel_logical_ring_begin(req, w->count * 2 + 2);
+	ret = intel_ring_begin(req, w->count * 2 + 2);
 	if (ret)
 		return ret;
 
@@ -1669,7 +1541,7 @@ static int intel_logical_ring_emit_pdps(struct drm_i915_gem_request *req)
 	const int num_lri_cmds = GEN8_LEGACY_PDPES * 2;
 	int i, ret;
 
-	ret = intel_logical_ring_begin(req, num_lri_cmds * 2 + 2);
+	ret = intel_ring_begin(req, num_lri_cmds * 2 + 2);
 	if (ret)
 		return ret;
 
@@ -1716,7 +1588,7 @@ static int gen8_emit_bb_start(struct drm_i915_gem_request *req,
 		req->ctx->ppgtt->pd_dirty_rings &= ~intel_engine_flag(req->engine);
 	}
 
-	ret = intel_logical_ring_begin(req, 4);
+	ret = intel_ring_begin(req, 4);
 	if (ret)
 		return ret;
 
@@ -1778,7 +1650,7 @@ static int gen8_emit_flush(struct drm_i915_gem_request *request,
 	uint32_t cmd;
 	int ret;
 
-	ret = intel_logical_ring_begin(request, 4);
+	ret = intel_ring_begin(request, 4);
 	if (ret)
 		return ret;
 
@@ -1846,7 +1718,7 @@ static int gen8_emit_flush_render(struct drm_i915_gem_request *request,
 			vf_flush_wa = true;
 	}
 
-	ret = intel_logical_ring_begin(request, vf_flush_wa ? 12 : 6);
+	ret = intel_ring_begin(request, vf_flush_wa ? 12 : 6);
 	if (ret)
 		return ret;
 
@@ -1920,7 +1792,7 @@ static int gen8_emit_request(struct drm_i915_gem_request *request)
 	struct intel_ringbuffer *ringbuf = request->ringbuf;
 	int ret;
 
-	ret = intel_logical_ring_begin(request, 6 + WA_TAIL_DWORDS);
+	ret = intel_ring_begin(request, 6 + WA_TAIL_DWORDS);
 	if (ret)
 		return ret;
 
@@ -1944,7 +1816,7 @@ static int gen8_emit_request_render(struct drm_i915_gem_request *request)
 	struct intel_ringbuffer *ringbuf = request->ringbuf;
 	int ret;
 
-	ret = intel_logical_ring_begin(request, 8 + WA_TAIL_DWORDS);
+	ret = intel_ring_begin(request, 8 + WA_TAIL_DWORDS);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/i915/intel_lrc.h

@@ -63,7 +63,6 @@ int intel_logical_ring_reserve_space(struct drm_i915_gem_request *request);
 void intel_logical_ring_stop(struct intel_engine_cs *engine);
 void intel_logical_ring_cleanup(struct intel_engine_cs *engine);
 int intel_logical_rings_init(struct drm_device *dev);
-int intel_logical_ring_begin(struct drm_i915_gem_request *req, int num_dwords);
 
 int logical_ring_flush_all_caches(struct drm_i915_gem_request *req);
 /**

drivers/gpu/drm/i915/intel_mocs.c

@@ -239,11 +239,9 @@ static int emit_mocs_control_table(struct drm_i915_gem_request *req,
 	if (WARN_ON(table->size > GEN9_NUM_MOCS_ENTRIES))
 		return -ENODEV;
 
-	ret = intel_logical_ring_begin(req, 2 + 2 * GEN9_NUM_MOCS_ENTRIES);
-	if (ret) {
-		DRM_DEBUG("intel_logical_ring_begin failed %d\n", ret);
+	ret = intel_ring_begin(req, 2 + 2 * GEN9_NUM_MOCS_ENTRIES);
+	if (ret)
 		return ret;
-	}
 
 	intel_logical_ring_emit(ringbuf,
 				MI_LOAD_REGISTER_IMM(GEN9_NUM_MOCS_ENTRIES));
@@ -305,11 +303,9 @@ static int emit_mocs_l3cc_table(struct drm_i915_gem_request *req,
 	if (WARN_ON(table->size > GEN9_NUM_MOCS_ENTRIES))
 		return -ENODEV;
 
-	ret = intel_logical_ring_begin(req, 2 + GEN9_NUM_MOCS_ENTRIES);
-	if (ret) {
-		DRM_DEBUG("intel_logical_ring_begin failed %d\n", ret);
+	ret = intel_ring_begin(req, 2 + GEN9_NUM_MOCS_ENTRIES);
+	if (ret)
 		return ret;
-	}
 
 	intel_logical_ring_emit(ringbuf,
 			MI_LOAD_REGISTER_IMM(GEN9_NUM_MOCS_ENTRIES / 2));

drivers/gpu/drm/i915/intel_pm.c

@@ -3904,6 +3904,8 @@ static void ilk_pipe_wm_get_hw_state(struct drm_crtc *crtc)
 	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		hw->wm_linetime[pipe] = I915_READ(PIPE_WM_LINETIME(pipe));
 
+	memset(active, 0, sizeof(*active));
+
 	active->pipe_enabled = intel_crtc->active;
 
 	if (active->pipe_enabled) {

drivers/gpu/drm/i915/intel_psr.c

@@ -280,7 +280,10 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
 	 * with the 5 or 6 idle patterns.
 	 */
 	uint32_t idle_frames = max(6, dev_priv->vbt.psr.idle_frames);
-	uint32_t val = 0x0;
+	uint32_t val = EDP_PSR_ENABLE;
+
+	val |= max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT;
+	val |= idle_frames << EDP_PSR_IDLE_FRAME_SHIFT;
 
 	if (IS_HASWELL(dev))
 		val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
@@ -288,14 +291,50 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
 	if (dev_priv->psr.link_standby)
 		val |= EDP_PSR_LINK_STANDBY;
 
-	I915_WRITE(EDP_PSR_CTL, val |
-		   max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
-		   idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
-		   EDP_PSR_ENABLE);
+	if (dev_priv->vbt.psr.tp1_wakeup_time > 5)
+		val |= EDP_PSR_TP1_TIME_2500us;
+	else if (dev_priv->vbt.psr.tp1_wakeup_time > 1)
+		val |= EDP_PSR_TP1_TIME_500us;
+	else if (dev_priv->vbt.psr.tp1_wakeup_time > 0)
+		val |= EDP_PSR_TP1_TIME_100us;
+	else
+		val |= EDP_PSR_TP1_TIME_0us;
+
+	if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
+		val |= EDP_PSR_TP2_TP3_TIME_2500us;
+	else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
+		val |= EDP_PSR_TP2_TP3_TIME_500us;
+	else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0)
+		val |= EDP_PSR_TP2_TP3_TIME_100us;
+	else
+		val |= EDP_PSR_TP2_TP3_TIME_0us;
+
+	if (intel_dp_source_supports_hbr2(intel_dp) &&
+	    drm_dp_tps3_supported(intel_dp->dpcd))
+		val |= EDP_PSR_TP1_TP3_SEL;
+	else
+		val |= EDP_PSR_TP1_TP2_SEL;
+
+	I915_WRITE(EDP_PSR_CTL, val);
+
+	if (!dev_priv->psr.psr2_support)
+		return;
+
+	/* FIXME: selective update is probably totally broken because it doesn't
+	 * mesh at all with our frontbuffer tracking. And the hw alone isn't
+	 * good enough. */
+	val = EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
+
+	if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 5)
+		val |= EDP_PSR2_TP2_TIME_2500;
+	else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 1)
+		val |= EDP_PSR2_TP2_TIME_500;
+	else if (dev_priv->vbt.psr.tp2_tp3_wakeup_time > 0)
+		val |= EDP_PSR2_TP2_TIME_100;
+	else
+		val |= EDP_PSR2_TP2_TIME_50;
 
-	if (dev_priv->psr.psr2_support)
-		I915_WRITE(EDP_PSR2_CTL, EDP_PSR2_ENABLE |
-				EDP_SU_TRACK_ENABLE | EDP_PSR2_TP2_TIME_100);
+	I915_WRITE(EDP_PSR2_CTL, val);
 }
 
 static bool intel_psr_match_conditions(struct intel_dp *intel_dp)

drivers/gpu/drm/i915/intel_ringbuffer.c

@@ -53,12 +53,6 @@ void intel_ring_update_space(struct intel_ringbuffer *ringbuf)
 					    ringbuf->tail, ringbuf->size);
 }
 
-int intel_ring_space(struct intel_ringbuffer *ringbuf)
-{
-	intel_ring_update_space(ringbuf);
-	return ringbuf->space;
-}
-
 bool intel_engine_stopped(struct intel_engine_cs *engine)
 {
 	struct drm_i915_private *dev_priv = engine->dev->dev_private;
@@ -1309,7 +1303,7 @@ static int gen8_rcs_signal(struct drm_i915_gem_request *signaller_req,
 		intel_ring_emit(signaller, seqno);
 		intel_ring_emit(signaller, 0);
 		intel_ring_emit(signaller, MI_SEMAPHORE_SIGNAL |
-					   MI_SEMAPHORE_TARGET(waiter->id));
+					   MI_SEMAPHORE_TARGET(waiter->hw_id));
 		intel_ring_emit(signaller, 0);
 	}
 
@@ -1349,7 +1343,7 @@ static int gen8_xcs_signal(struct drm_i915_gem_request *signaller_req,
 		intel_ring_emit(signaller, upper_32_bits(gtt_offset));
 		intel_ring_emit(signaller, seqno);
 		intel_ring_emit(signaller, MI_SEMAPHORE_SIGNAL |
-					   MI_SEMAPHORE_TARGET(waiter->id));
+					   MI_SEMAPHORE_TARGET(waiter->hw_id));
 		intel_ring_emit(signaller, 0);
 	}
 
@@ -1573,6 +1567,8 @@ pc_render_add_request(struct drm_i915_gem_request *req)
 static void
 gen6_seqno_barrier(struct intel_engine_cs *engine)
 {
+	struct drm_i915_private *dev_priv = engine->dev->dev_private;
+
 	/* Workaround to force correct ordering between irq and seqno writes on
 	 * ivb (and maybe also on snb) by reading from a CS register (like
 	 * ACTHD) before reading the status page.
@@ -1584,9 +1580,13 @@ gen6_seqno_barrier(struct intel_engine_cs *engine)
 	 * the write time to land, but that would incur a delay after every
 	 * batch i.e. much more frequent than a delay when waiting for the
 	 * interrupt (with the same net latency).
+	 *
+	 * Also note that to prevent whole machine hangs on gen7, we have to
+	 * take the spinlock to guard against concurrent cacheline access.
 	 */
-	struct drm_i915_private *dev_priv = engine->dev->dev_private;
+	spin_lock_irq(&dev_priv->uncore.lock);
 	POSTING_READ_FW(RING_ACTHD(engine->mmio_base));
+	spin_unlock_irq(&dev_priv->uncore.lock);
 }
 
 static u32
@@ -2312,51 +2312,6 @@ void intel_cleanup_engine(struct intel_engine_cs *engine)
 	engine->dev = NULL;
 }
 
-static int ring_wait_for_space(struct intel_engine_cs *engine, int n)
-{
-	struct intel_ringbuffer *ringbuf = engine->buffer;
-	struct drm_i915_gem_request *request;
-	unsigned space;
-	int ret;
-
-	if (intel_ring_space(ringbuf) >= n)
-		return 0;
-
-	/* The whole point of reserving space is to not wait! */
-	WARN_ON(ringbuf->reserved_in_use);
-
-	list_for_each_entry(request, &engine->request_list, list) {
-		space = __intel_ring_space(request->postfix, ringbuf->tail,
-					   ringbuf->size);
-		if (space >= n)
-			break;
-	}
-
-	if (WARN_ON(&request->list == &engine->request_list))
-		return -ENOSPC;
-
-	ret = i915_wait_request(request);
-	if (ret)
-		return ret;
-
-	ringbuf->space = space;
-	return 0;
-}
-
-static void __wrap_ring_buffer(struct intel_ringbuffer *ringbuf)
-{
-	uint32_t __iomem *virt;
-	int rem = ringbuf->size - ringbuf->tail;
-
-	virt = ringbuf->virtual_start + ringbuf->tail;
-	rem /= 4;
-	while (rem--)
-		iowrite32(MI_NOOP, virt++);
-
-	ringbuf->tail = 0;
-	intel_ring_update_space(ringbuf);
-}
-
 int intel_engine_idle(struct intel_engine_cs *engine)
 {
 	struct drm_i915_gem_request *req;
@@ -2398,62 +2353,81 @@ int intel_ring_reserve_space(struct drm_i915_gem_request *request)
 
 void intel_ring_reserved_space_reserve(struct intel_ringbuffer *ringbuf, int size)
 {
-	WARN_ON(ringbuf->reserved_size);
-	WARN_ON(ringbuf->reserved_in_use);
-
+	GEM_BUG_ON(ringbuf->reserved_size);
 	ringbuf->reserved_size = size;
 }
 
 void intel_ring_reserved_space_cancel(struct intel_ringbuffer *ringbuf)
 {
-	WARN_ON(ringbuf->reserved_in_use);
-
+	GEM_BUG_ON(!ringbuf->reserved_size);
 	ringbuf->reserved_size   = 0;
-	ringbuf->reserved_in_use = false;
 }
 
 void intel_ring_reserved_space_use(struct intel_ringbuffer *ringbuf)
 {
-	WARN_ON(ringbuf->reserved_in_use);
-
-	ringbuf->reserved_in_use = true;
-	ringbuf->reserved_tail   = ringbuf->tail;
+	GEM_BUG_ON(!ringbuf->reserved_size);
+	ringbuf->reserved_size   = 0;
 }
 
 void intel_ring_reserved_space_end(struct intel_ringbuffer *ringbuf)
 {
-	WARN_ON(!ringbuf->reserved_in_use);
-	if (ringbuf->tail > ringbuf->reserved_tail) {
-		WARN(ringbuf->tail > ringbuf->reserved_tail + ringbuf->reserved_size,
-		     "request reserved size too small: %d vs %d!\n",
-		     ringbuf->tail - ringbuf->reserved_tail, ringbuf->reserved_size);
-	} else {
+	GEM_BUG_ON(ringbuf->reserved_size);
+}
+
+static int wait_for_space(struct drm_i915_gem_request *req, int bytes)
+{
+	struct intel_ringbuffer *ringbuf = req->ringbuf;
+	struct intel_engine_cs *engine = req->engine;
+	struct drm_i915_gem_request *target;
+
+	intel_ring_update_space(ringbuf);
+	if (ringbuf->space >= bytes)
+		return 0;
+
+	/*
+	 * Space is reserved in the ringbuffer for finalising the request,
+	 * as that cannot be allowed to fail. During request finalisation,
+	 * reserved_space is set to 0 to stop the overallocation and the
+	 * assumption is that then we never need to wait (which has the
+	 * risk of failing with EINTR).
+	 *
+	 * See also i915_gem_request_alloc() and i915_add_request().
+	 */
+	GEM_BUG_ON(!ringbuf->reserved_size);
+
+	list_for_each_entry(target, &engine->request_list, list) {
+		unsigned space;
+
 		/*
-		 * The ring was wrapped while the reserved space was in use.
-		 * That means that some unknown amount of the ring tail was
-		 * no-op filled and skipped. Thus simply adding the ring size
-		 * to the tail and doing the above space check will not work.
-		 * Rather than attempt to track how much tail was skipped,
-		 * it is much simpler to say that also skipping the sanity
-		 * check every once in a while is not a big issue.
+		 * The request queue is per-engine, so can contain requests
+		 * from multiple ringbuffers. Here, we must ignore any that
+		 * aren't from the ringbuffer we're considering.
 		 */
+		if (target->ringbuf != ringbuf)
+			continue;
+
+		/* Would completion of this request free enough space? */
+		space = __intel_ring_space(target->postfix, ringbuf->tail,
+					   ringbuf->size);
+		if (space >= bytes)
+			break;
 	}
 
-	ringbuf->reserved_size   = 0;
-	ringbuf->reserved_in_use = false;
+	if (WARN_ON(&target->list == &engine->request_list))
+		return -ENOSPC;
+
+	return i915_wait_request(target);
 }
 
-static int __intel_ring_prepare(struct intel_engine_cs *engine, int bytes)
+int intel_ring_begin(struct drm_i915_gem_request *req, int num_dwords)
 {
-	struct intel_ringbuffer *ringbuf = engine->buffer;
-	int remain_usable = ringbuf->effective_size - ringbuf->tail;
+	struct intel_ringbuffer *ringbuf = req->ringbuf;
 	int remain_actual = ringbuf->size - ringbuf->tail;
-	int ret, total_bytes, wait_bytes = 0;
+	int remain_usable = ringbuf->effective_size - ringbuf->tail;
+	int bytes = num_dwords * sizeof(u32);
+	int total_bytes, wait_bytes;
 	bool need_wrap = false;
 
-	if (ringbuf->reserved_in_use)
-		total_bytes = bytes;
-	else
 	total_bytes = bytes + ringbuf->reserved_size;
 
 	if (unlikely(bytes > remain_usable)) {
@@ -2463,44 +2437,42 @@ static int __intel_ring_prepare(struct intel_engine_cs *engine, int bytes)
 		 */
 		wait_bytes = remain_actual + total_bytes;
 		need_wrap = true;
-	} else {
-		if (unlikely(total_bytes > remain_usable)) {
+	} else if (unlikely(total_bytes > remain_usable)) {
 		/*
 		 * The base request will fit but the reserved space
-			 * falls off the end. So don't need an immediate wrap
+		 * falls off the end. So we don't need an immediate wrap
 		 * and only need to effectively wait for the reserved
 		 * size space from the start of ringbuffer.
 		 */
 		wait_bytes = remain_actual + ringbuf->reserved_size;
-		} else if (total_bytes > ringbuf->space) {
+	} else {
 		/* No wrapping required, just waiting. */
 		wait_bytes = total_bytes;
 	}
-	}
 
-	if (wait_bytes) {
-		ret = ring_wait_for_space(engine, wait_bytes);
+	if (wait_bytes > ringbuf->space) {
+		int ret = wait_for_space(req, wait_bytes);
 		if (unlikely(ret))
 			return ret;
 
-		if (need_wrap)
-			__wrap_ring_buffer(ringbuf);
+		intel_ring_update_space(ringbuf);
+		if (unlikely(ringbuf->space < wait_bytes))
+			return -EAGAIN;
 	}
 
-	return 0;
-}
-
-int intel_ring_begin(struct drm_i915_gem_request *req,
-		     int num_dwords)
-{
-	struct intel_engine_cs *engine = req->engine;
-	int ret;
+	if (unlikely(need_wrap)) {
+		GEM_BUG_ON(remain_actual > ringbuf->space);
+		GEM_BUG_ON(ringbuf->tail + remain_actual > ringbuf->size);
 
-	ret = __intel_ring_prepare(engine, num_dwords * sizeof(uint32_t));
-	if (ret)
-		return ret;
+		/* Fill the tail with MI_NOOP */
+		memset(ringbuf->virtual_start + ringbuf->tail,
+		       0, remain_actual);
+		ringbuf->tail = 0;
+		ringbuf->space -= remain_actual;
+	}
 
-	engine->buffer->space -= num_dwords * sizeof(uint32_t);
+	ringbuf->space -= bytes;
+	GEM_BUG_ON(ringbuf->space < 0);
 	return 0;
 }
 
@@ -2772,6 +2744,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev)
 	engine->name = "render ring";
 	engine->id = RCS;
 	engine->exec_id = I915_EXEC_RENDER;
+	engine->hw_id = 0;
 	engine->mmio_base = RENDER_RING_BASE;
 
 	if (INTEL_INFO(dev)->gen >= 8) {
@@ -2923,6 +2896,7 @@ int intel_init_bsd_ring_buffer(struct drm_device *dev)
 	engine->name = "bsd ring";
 	engine->id = VCS;
 	engine->exec_id = I915_EXEC_BSD;
+	engine->hw_id = 1;
 
 	engine->write_tail = ring_write_tail;
 	if (INTEL_INFO(dev)->gen >= 6) {
@@ -3001,6 +2975,7 @@ int intel_init_bsd2_ring_buffer(struct drm_device *dev)
 	engine->name = "bsd2 ring";
 	engine->id = VCS2;
 	engine->exec_id = I915_EXEC_BSD;
+	engine->hw_id = 4;
 
 	engine->write_tail = ring_write_tail;
 	engine->mmio_base = GEN8_BSD2_RING_BASE;
@@ -3033,6 +3008,7 @@ int intel_init_blt_ring_buffer(struct drm_device *dev)
 	engine->name = "blitter ring";
 	engine->id = BCS;
 	engine->exec_id = I915_EXEC_BLT;
+	engine->hw_id = 2;
 
 	engine->mmio_base = BLT_RING_BASE;
 	engine->write_tail = ring_write_tail;
@@ -3092,6 +3068,7 @@ int intel_init_vebox_ring_buffer(struct drm_device *dev)
 	engine->name = "video enhancement ring";
 	engine->id = VECS;
 	engine->exec_id = I915_EXEC_VEBOX;
+	engine->hw_id = 3;
 
 	engine->mmio_base = VEBOX_RING_BASE;
 	engine->write_tail = ring_write_tail;

drivers/gpu/drm/i915/intel_ringbuffer.h

@@ -108,8 +108,6 @@ struct intel_ringbuffer {
 	int size;
 	int effective_size;
 	int reserved_size;
-	int reserved_tail;
-	bool reserved_in_use;
 
 	/** We track the position of the requests in the ring buffer, and
 	 * when each is retired we increment last_retired_head as the GPU
@@ -156,7 +154,8 @@ struct  intel_engine_cs {
 #define I915_NUM_ENGINES 5
 #define _VCS(n) (VCS + (n))
 	unsigned int exec_id;
-	unsigned int guc_id;
+	unsigned int hw_id;
+	unsigned int guc_id; /* XXX same as hw_id? */
 	u32		mmio_base;
 	struct		drm_device *dev;
 	struct intel_ringbuffer *buffer;
@@ -459,7 +458,6 @@ static inline void intel_ring_advance(struct intel_engine_cs *engine)
 }
 int __intel_ring_space(int head, int tail, int size);
 void intel_ring_update_space(struct intel_ringbuffer *ringbuf);
-int intel_ring_space(struct intel_ringbuffer *ringbuf);
 bool intel_engine_stopped(struct intel_engine_cs *engine);
 
 int __must_check intel_engine_idle(struct intel_engine_cs *engine);

drivers/gpu/drm/i915/intel_vbt_defs.h

@@ -740,6 +740,7 @@ struct bdb_psr {
 #define	 DEVICE_TYPE_INT_TV	0x1009
 #define	 DEVICE_TYPE_HDMI	0x60D2
 #define	 DEVICE_TYPE_DP		0x68C6
+#define	 DEVICE_TYPE_DP_DUAL_MODE	0x60D6
 #define	 DEVICE_TYPE_eDP	0x78C6
 
 #define  DEVICE_TYPE_CLASS_EXTENSION	(1 << 15)
@@ -774,6 +775,17 @@ struct bdb_psr {
 	 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
 	 DEVICE_TYPE_ANALOG_OUTPUT)
 
+#define DEVICE_TYPE_DP_DUAL_MODE_BITS \
+	(DEVICE_TYPE_INTERNAL_CONNECTOR | \
+	 DEVICE_TYPE_MIPI_OUTPUT | \
+	 DEVICE_TYPE_COMPOSITE_OUTPUT | \
+	 DEVICE_TYPE_LVDS_SINGALING | \
+	 DEVICE_TYPE_TMDS_DVI_SIGNALING | \
+	 DEVICE_TYPE_VIDEO_SIGNALING | \
+	 DEVICE_TYPE_DISPLAYPORT_OUTPUT | \
+	 DEVICE_TYPE_DIGITAL_OUTPUT | \
+	 DEVICE_TYPE_ANALOG_OUTPUT)
+
 /* define the DVO port for HDMI output type */
 #define		DVO_B		1
 #define		DVO_C		2

include/drm/drm_dp_dual_mode_helper.h

+/*
+ * Copyright © 2016 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef DRM_DP_DUAL_MODE_HELPER_H
+#define DRM_DP_DUAL_MODE_HELPER_H
+
+#include <linux/types.h>
+
+/*
+ * Optional for type 1 DVI adaptors
+ * Mandatory for type 1 HDMI and type 2 adaptors
+ */
+#define DP_DUAL_MODE_HDMI_ID 0x00 /* 00-0f */
+#define  DP_DUAL_MODE_HDMI_ID_LEN 16
+/*
+ * Optional for type 1 adaptors
+ * Mandatory for type 2 adaptors
+ */
+#define DP_DUAL_MODE_ADAPTOR_ID 0x10
+#define  DP_DUAL_MODE_REV_MASK 0x07
+#define  DP_DUAL_MODE_REV_TYPE2 0x00
+#define  DP_DUAL_MODE_TYPE_MASK 0xf0
+#define  DP_DUAL_MODE_TYPE_TYPE2 0xa0
+#define DP_DUAL_MODE_IEEE_OUI 0x11 /* 11-13*/
+#define  DP_DUAL_IEEE_OUI_LEN 3
+#define DP_DUAL_DEVICE_ID 0x14 /* 14-19 */
+#define  DP_DUAL_DEVICE_ID_LEN 6
+#define DP_DUAL_MODE_HARDWARE_REV 0x1a
+#define DP_DUAL_MODE_FIRMWARE_MAJOR_REV 0x1b
+#define DP_DUAL_MODE_FIRMWARE_MINOR_REV 0x1c
+#define DP_DUAL_MODE_MAX_TMDS_CLOCK 0x1d
+#define DP_DUAL_MODE_I2C_SPEED_CAP 0x1e
+#define DP_DUAL_MODE_TMDS_OEN 0x20
+#define  DP_DUAL_MODE_TMDS_DISABLE 0x01
+#define DP_DUAL_MODE_HDMI_PIN_CTRL 0x21
+#define  DP_DUAL_MODE_CEC_ENABLE 0x01
+#define DP_DUAL_MODE_I2C_SPEED_CTRL 0x22
+
+struct i2c_adapter;
+
+ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter,
+			      u8 offset, void *buffer, size_t size);
+ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter,
+			       u8 offset, const void *buffer, size_t size);
+
+/**
+ * enum drm_dp_dual_mode_type - Type of the DP dual mode adaptor
+ * @DRM_DP_DUAL_MODE_NONE: No DP dual mode adaptor
+ * @DRM_DP_DUAL_MODE_UNKNOWN: Could be either none or type 1 DVI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE1_DVI: Type 1 DVI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE1_HDMI: Type 1 HDMI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE2_DVI: Type 2 DVI adaptor
+ * @DRM_DP_DUAL_MODE_TYPE2_HDMI: Type 2 HDMI adaptor
+ */
+enum drm_dp_dual_mode_type {
+	DRM_DP_DUAL_MODE_NONE,
+	DRM_DP_DUAL_MODE_UNKNOWN,
+	DRM_DP_DUAL_MODE_TYPE1_DVI,
+	DRM_DP_DUAL_MODE_TYPE1_HDMI,
+	DRM_DP_DUAL_MODE_TYPE2_DVI,
+	DRM_DP_DUAL_MODE_TYPE2_HDMI,
+};
+
+enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter);
+int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type,
+				    struct i2c_adapter *adapter);
+int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
+				     struct i2c_adapter *adapter, bool *enabled);
+int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type,
+				     struct i2c_adapter *adapter, bool enable);
+const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type);
+
+#endif