Commit 802d6110 authored by Andrew Morton's avatar Andrew Morton Committed by Linus Torvalds

[PATCH] sn: Mostly printk clean up and remove some dead code

From: Pat Gefre <pfg@sgi.com>

Mostly printk clean up and remove some dead code
parent 052d56d8
No related merge requests found
......@@ -2085,8 +2085,8 @@ pcibr_addr_pci_to_xio(vertex_hdl_t pconn_vhdl,
bridge->b_wid_tflush; /* wait until Bridge PIO complete */
#ifdef PCI_LATER
PCIBR_DEBUG((PCIBR_DEBUG_DEVREG, pconn_vhdl,
"pcibr_addr_pci_to_xio: Device(%d): %x\n",
win, devreg, device_bits));
"pcibr_addr_pci_to_xio: Device(%d): 0x%x\n",
win, devreg));
#endif
}
pcibr_soft->bs_slot[win].bss_devio.bssd_space = space;
......@@ -2161,9 +2161,9 @@ pcibr_addr_pci_to_xio(vertex_hdl_t pconn_vhdl,
} else if (IS_PIC_BUSNUM_SOFT(pcibr_soft, 1)) { /* PIC bus 1 */
base = PICBRIDGE1_PCI_MEM32_BASE;
limit = PICBRIDGE1_PCI_MEM32_LIMIT;
} else { /* Bridge/Xbridge */
base = BRIDGE_PCI_MEM32_BASE;
limit = BRIDGE_PCI_MEM32_LIMIT;
} else {
printk("pcibr_addr_pci_to_xio(): unknown bridge type");
return (iopaddr_t)0;
}
if ((pci_addr + base + req_size - 1) <= limit)
......@@ -2177,9 +2177,9 @@ pcibr_addr_pci_to_xio(vertex_hdl_t pconn_vhdl,
} else if (IS_PIC_BUSNUM_SOFT(pcibr_soft, 1)) { /* PIC bus 1 */
base = PICBRIDGE1_PCI_MEM64_BASE;
limit = PICBRIDGE1_PCI_MEM64_LIMIT;
} else { /* Bridge/Xbridge */
base = BRIDGE_PCI_MEM64_BASE;
limit = BRIDGE_PCI_MEM64_LIMIT;
} else {
printk("pcibr_addr_pci_to_xio(): unknown bridge type");
return (iopaddr_t)0;
}
if ((pci_addr + base + req_size - 1) <= limit)
......@@ -2554,6 +2554,7 @@ pcibr_piospace_free(vertex_hdl_t pconn_vhdl,
size_t req_size)
{
pcibr_info_t pcibr_info = pcibr_info_get(pconn_vhdl);
pcibr_soft_t pcibr_soft = (pcibr_soft_t) pcibr_info->f_mfast;
pciio_piospace_t piosp;
unsigned long s;
char name[1024];
......
......@@ -254,12 +254,6 @@ print_register(unsigned long long reg, struct reg_desc *addr)
printk(">\n");
}
#define BEM_ADD_STR(s) printk("%s", (s))
#define BEM_ADD_VAR(v) printk("\t%20s: 0x%llx\n", #v, ((unsigned long long)v))
#define BEM_ADD_REG(r) printk("\t%20s: ", #r); print_register((r), r ## _desc)
#define BEM_ADD_NSPC(n,s) printk("\t%20s: ", n); print_register(s, space_desc)
#define BEM_ADD_SPC(s) BEM_ADD_NSPC(#s, s)
/*
* display memory directory state
......
......@@ -351,19 +351,6 @@ pcibr_intr_alloc(vertex_hdl_t pconn_vhdl,
*/
xtalk_intr_free(xtalk_intr);
xtalk_intr = *xtalk_intr_p;
#if PARANOID
/* once xtalk_intr is set, we never clear it,
* so if the CAS fails above, this condition
* can "never happen" ...
*/
if (!xtalk_intr) {
printk(KERN_ALERT
"pcibr_intr_alloc %v: unable to set xtalk interrupt resources",
xconn_vhdl);
/* yes, we leak resources here. */
return 0;
}
#endif
}
}
......@@ -648,9 +635,6 @@ pcibr_intr_disconnect(pcibr_intr_t pcibr_intr)
if (!pcibr_int_bits)
return;
/* PIC WAR. PV# 854697
* On PIC we must write 64-bit MMRs with 64-bit stores
*/
s = pcibr_lock(pcibr_soft);
if (PCIBR_WAR_ENABLED(PV854697, pcibr_soft)) {
int_enable = bridge->p_int_enable_64;
......@@ -904,6 +888,7 @@ pcibr_intr_func(intr_arg_t arg)
for (list = wrap->iw_list; list != NULL; list = list->il_next) {
if ((intr = list->il_intr) && (intr->bi_flags & PCIIO_INTR_CONNECTED)) {
/*
* This device may have initiated write
* requests since the bridge last saw
......@@ -917,7 +902,7 @@ pcibr_intr_func(intr_arg_t arg)
*
* There is a similar race condition if
* an interrupt handler loops around and
* notices further service is required.
* notices further service is requred.
* Perhaps we need to have an explicit
* call that interrupt handlers need to
* do between noticing that DMA to memory
......
......@@ -72,7 +72,7 @@ do_pcibr_rrb_count_valid(bridge_t *bridge,
pciio_slot_t slot,
int vchan)
{
bridgereg_t tmp;
uint64_t tmp;
uint16_t enable_bit, vchan_bits, pdev_bits, rrb_bits;
int rrb_index, cnt=0;
......@@ -105,7 +105,7 @@ int
do_pcibr_rrb_count_avail(bridge_t *bridge,
pciio_slot_t slot)
{
bridgereg_t tmp;
uint64_t tmp;
uint16_t enable_bit;
int rrb_index, cnt=0;
......@@ -141,7 +141,7 @@ do_pcibr_rrb_alloc(bridge_t *bridge,
int vchan,
int more)
{
bridgereg_t reg, tmp = (bridgereg_t)0;
uint64_t reg, tmp = 0;
uint16_t enable_bit, vchan_bits, pdev_bits, rrb_bits;
int rrb_index;
......@@ -186,7 +186,7 @@ do_pcibr_rrb_free(bridge_t *bridge,
int vchan,
int less)
{
bridgereg_t reg, tmp = (bridgereg_t)0, clr = 0;
uint64_t reg, tmp = 0, clr = 0;
uint16_t enable_bit, vchan_bits, pdev_bits, rrb_bits;
int rrb_index;
......@@ -258,7 +258,7 @@ do_pcibr_rrb_free_all(pcibr_soft_t pcibr_soft,
void
do_pcibr_rrb_clear(bridge_t *bridge, int rrb)
{
bridgereg_t status;
uint64_t status;
/* bridge_lock must be held;
* this RRB must be disabled.
......@@ -350,7 +350,7 @@ pcibr_rrb_flush(vertex_hdl_t pconn_vhdl)
pciio_slot_t slot = PCIBR_INFO_SLOT_GET_INT(pciio_info);
bridge_t *bridge = pcibr_soft->bs_base;
bridgereg_t tmp;
uint64_t tmp;
uint16_t enable_bit, pdev_bits, rrb_bits, rrb_mask;
int rrb_index;
unsigned long s;
......
......@@ -280,13 +280,9 @@ pcibr_slot_info_init(vertex_hdl_t pcibr_vhdl,
*/
if (!(pcix_cap = pcibr_find_capability(cfgw, PCI_CAP_PCIX))) {
printk(KERN_WARNING
#if defined(SUPPORT_PRINTING_V_FORMAT)
"%v: Bus running in PCI-X mode, But card in slot %d, "
"func %d not PCI-X capable\n", pcibr_vhdl, slot, func);
#else
"0x%lx: Bus running in PCI-X mode, But card in slot %d, "
"func %d not PCI-X capable\n", (unsigned long)pcibr_vhdl, slot, func);
#endif
"%s: Bus running in PCI-X mode, But card in slot %d, "
"func %d not PCI-X capable\n",
pcibr_soft->bs_name, slot, func);
pcibr_device_info_new(pcibr_soft, slot, PCIIO_FUNC_NONE,
PCIIO_VENDOR_ID_NONE, PCIIO_DEVICE_ID_NONE);
continue;
......
......@@ -170,13 +170,14 @@ pic_attach(vertex_hdl_t conn_v)
bridge1 = (bridge_t *)((char *)bridge0 + PIC_BUS1_OFFSET);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v,
"pic_attach: bridge0=0x%x, bridge1=0x%x\n",
"pic_attach: bridge0=0x%lx, bridge1=0x%lx\n",
bridge0, bridge1));
conn_v0 = conn_v1 = conn_v;
/* If dual-ported then split the two PIC buses across both Cbricks */
if ((peer_conn_v = (pic_bus1_redist(NASID_GET(bridge0), conn_v))))
peer_conn_v = pic_bus1_redist(NASID_GET(bridge0), conn_v);
if (peer_conn_v)
conn_v1 = peer_conn_v;
/*
......@@ -204,7 +205,7 @@ pic_attach(vertex_hdl_t conn_v)
}
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v,
"pic_attach: pcibr_vhdl0=%v, pcibr_vhdl1=%v\n",
"pic_attach: pcibr_vhdl0=0x%lx, pcibr_vhdl1=0x%lx\n",
pcibr_vhdl0, pcibr_vhdl1));
/* register pci provider array */
......@@ -222,7 +223,7 @@ pic_attach(vertex_hdl_t conn_v)
bus1_soft->bs_peers_soft = bus0_soft;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v,
"pic_attach: bus0_soft=0x%x, bus1_soft=0x%x\n",
"pic_attach: bus0_soft=0x%lx, bus1_soft=0x%lx\n",
bus0_soft, bus1_soft));
return 0;
......
......@@ -234,6 +234,8 @@ xtalk_widgetdev_enable_f (vertex_hdl_t, int);
typedef void
xtalk_widgetdev_shutdown_f (vertex_hdl_t, int);
/* Error Management */
/* Early Action Support */
typedef caddr_t
xtalk_early_piotrans_addr_f (xwidget_part_num_t part_num,
......@@ -276,8 +278,6 @@ typedef struct xtalk_provider_s {
/* CONFIGURATION MANAGEMENT */
xtalk_provider_startup_f *provider_startup;
xtalk_provider_shutdown_f *provider_shutdown;
/* Error Management */
} xtalk_provider_t;
/* Crosstalk devices use these standard Crosstalk provider interfaces */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment