staging: sm750fb: Fix lines over 80 characters

Fix lines over 80 character warnings. Issue found
by checkpatch.
Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com>
Link: https://lore.kernel.org/r/1f635b0469f93d8460d513f5fabd877dc5054a33.1571108943.git.jamal.k.shareef@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/sm750fb/ddk750_display.c

@@ -147,8 +147,8 @@ void ddk750_set_logical_disp_out(enum disp_output output)
 
 	if (output & PNL_SEQ_USAGE) {
 		/* set  panel sequence */
-		sw_panel_power_sequence((output & PNL_SEQ_MASK) >> PNL_SEQ_OFFSET,
-		4);
+		sw_panel_power_sequence((output & PNL_SEQ_MASK) >>
+					PNL_SEQ_OFFSET, 4);
 	}
 
 	if (output & DAC_USAGE)

drivers/staging/sm750fb/ddk750_mode.c

@@ -13,7 +13,8 @@
  * HW only supports 7 predefined pixel clocks, and clock select is
  * in bit 29:27 of Display Control register.
  */
-static unsigned long displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
+static unsigned long
+displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
 			     unsigned long dispControl)
 {
 	unsigned long x, y;

drivers/staging/sm750fb/ddk750_sii164.c

@@ -39,8 +39,10 @@ unsigned short sii164GetVendorID(void)
 {
 	unsigned short vendorID;
 
-	vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_HIGH) << 8) |
-		    (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_VENDOR_ID_LOW);
+	vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					       SII164_VENDOR_ID_HIGH) << 8) |
+		   (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					      SII164_VENDOR_ID_LOW);
 
 	return vendorID;
 }
@@ -56,13 +58,18 @@ unsigned short sii164GetDeviceID(void)
 {
 	unsigned short deviceID;
 
-	deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_HIGH) << 8) |
-		    (unsigned short)i2cReadReg(SII164_I2C_ADDRESS, SII164_DEVICE_ID_LOW);
+	deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					       SII164_DEVICE_ID_HIGH) << 8) |
+		   (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+					      SII164_DEVICE_ID_LOW);
 
 	return deviceID;
 }
 
-/* DVI.C will handle all SiI164 chip stuffs and try it best to make code minimal and useful */
+/*
+ *  DVI.C will handle all SiI164 chip stuffs and try its best to make code
+ *  minimal and useful
+ */
 
 /*
  *  sii164InitChip
@@ -133,7 +140,8 @@ long sii164InitChip(unsigned char edge_select,
 #endif
 
 	/* Check if SII164 Chip exists */
-	if ((sii164GetVendorID() == SII164_VENDOR_ID) && (sii164GetDeviceID() == SII164_DEVICE_ID)) {
+	if ((sii164GetVendorID() == SII164_VENDOR_ID) &&
+			(sii164GetDeviceID() == SII164_DEVICE_ID)) {
 		/*
 		 *  Initialize SII164 controller chip.
 		 */
@@ -254,7 +262,9 @@ void sii164ResetChip(void)
 
 /*
  * sii164GetChipString
- *      This function returns a char string name of the current DVI Controller chip.
+ *      This function returns a char string name of the current DVI Controller
+ *      chip.
+ *
  *      It's convenient for application need to display the chip name.
  */
 char *sii164GetChipString(void)
@@ -330,8 +340,8 @@ void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
 
 	detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
 
-	/* Depending on each DVI controller, need to enable the hot plug based on each
-	 * individual chip design.
+	/* Depending on each DVI controller, need to enable the hot plug based
+	 * on each individual chip design.
 	 */
 	if (enableHotPlug != 0)
 		sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);

drivers/staging/sm750fb/ddk750_sii164.h

@@ -6,7 +6,10 @@
 
 /* Hot Plug detection mode structure */
 enum sii164_hot_plug_mode {
-	SII164_HOTPLUG_DISABLE = 0,         /* Disable Hot Plug output bit (always high). */
+	SII164_HOTPLUG_DISABLE = 0,	/* Disable Hot Plug output bit
+					 * (always high).
+					 */
+
 	SII164_HOTPLUG_USE_MDI,         /* Use Monitor Detect Interrupt bit. */
 	SII164_HOTPLUG_USE_RSEN,        /* Use Receiver Sense detect bit. */
 	SII164_HOTPLUG_USE_HTPLG        /* Use Hot Plug detect bit. */