ARM: dts: imx6: edmqmx6: add SPI bus and flash

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts

@@ -95,6 +95,20 @@ led-red {
 	};
 };
 
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio1 12 0>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "m25p80";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -268,6 +282,15 @@ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
 			>;
 		};
 
+		pinctrl_ecspi5: ecspi5rp-1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x80000000
+				MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x80000000
+				MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x80000000
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x80000000
+			>;
+		};
+
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0