Merge tag 'tty-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small serial and tty fixes for reported issues.

  All have been in linux-next successfully"

* tag 'tty-4.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: Fix !TASK_RUNNING diagnostic warning from paste_selection()
  serial: core: Fix crashes while echoing when closing
  m32r: Add ioreadXX/iowriteXX big-endian mmio accessors
  Revert "serial: imx: initialized DMA w/o HW flow enabled"
  sc16is7xx: fix FIFO address of secondary UART
  sc16is7xx: fix Kconfig dependencies
  serial: etraxfs-uart: Fix release etraxfs_uart_ports
  tty/vt: Fix the memory leak in visual_init
  serial: amba-pl011: Fix devm_ioremap_resource return value check
  n_tty: signal and flush atomically

arch/m32r/include/asm/io.h

@@ -174,6 +174,11 @@ static inline void _writel(unsigned long l, unsigned long addr)
 #define iowrite16 writew
 #define iowrite32 writel
 
+#define ioread16be(addr)	be16_to_cpu(readw(addr))
+#define ioread32be(addr)	be32_to_cpu(readl(addr))
+#define iowrite16be(v, addr)	writew(cpu_to_be16(v), (addr))
+#define iowrite32be(v, addr)	writel(cpu_to_be32(v), (addr))
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */

drivers/tty/n_tty.c

@@ -1108,19 +1108,29 @@ static void eraser(unsigned char c, struct tty_struct *tty)
  *	Locking: ctrl_lock
  */
 
-static void isig(int sig, struct tty_struct *tty)
+static void __isig(int sig, struct tty_struct *tty)
 {
-	struct n_tty_data *ldata = tty->disc_data;
 	struct pid *tty_pgrp = tty_get_pgrp(tty);
 	if (tty_pgrp) {
 		kill_pgrp(tty_pgrp, sig, 1);
 		put_pid(tty_pgrp);
 	}
+}
 
-	if (!L_NOFLSH(tty)) {
+static void isig(int sig, struct tty_struct *tty)
+{
+	struct n_tty_data *ldata = tty->disc_data;
+
+	if (L_NOFLSH(tty)) {
+		/* signal only */
+		__isig(sig, tty);
+
+	} else { /* signal and flush */
 		up_read(&tty->termios_rwsem);
 		down_write(&tty->termios_rwsem);
 
+		__isig(sig, tty);
+
 		/* clear echo buffer */
 		mutex_lock(&ldata->output_lock);
 		ldata->echo_head = ldata->echo_tail = 0;

drivers/tty/serial/Kconfig

@@ -1185,7 +1185,7 @@ config SERIAL_SC16IS7XX_CORE
 config SERIAL_SC16IS7XX
         tristate "SC16IS7xx serial support"
         select SERIAL_CORE
-        depends on I2C || SPI_MASTER
+        depends on (SPI_MASTER && !I2C) || I2C
         help
           This selects support for SC16IS7xx serial ports.
           Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,

drivers/tty/serial/amba-pl011.c

@@ -2310,8 +2310,8 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 	void __iomem *base;
 
 	base = devm_ioremap_resource(dev, mmiobase);
-	if (!base)
-		return -ENOMEM;
+	if (IS_ERR(base))
+		return PTR_ERR(base);
 
 	index = pl011_probe_dt_alias(index, dev);
 

drivers/tty/serial/etraxfs-uart.c

@@ -950,7 +950,7 @@ static int etraxfs_uart_remove(struct platform_device *pdev)
 
 	port = platform_get_drvdata(pdev);
 	uart_remove_one_port(&etraxfs_uart_driver, port);
-	etraxfs_uart_ports[pdev->id] = NULL;
+	etraxfs_uart_ports[port->line] = NULL;
 
 	return 0;
 }

drivers/tty/serial/imx.c

@@ -1121,11 +1121,6 @@ static int imx_startup(struct uart_port *port)
 
 	writel(temp & ~UCR4_DREN, sport->port.membase + UCR4);
 
-	/* Can we enable the DMA support? */
-	if (is_imx6q_uart(sport) && !uart_console(port) &&
-	    !sport->dma_is_inited)
-		imx_uart_dma_init(sport);
-
 	spin_lock_irqsave(&sport->port.lock, flags);
 	/* Reset fifo's and state machines */
 	i = 100;
@@ -1143,9 +1138,6 @@ static int imx_startup(struct uart_port *port)
 	writel(USR1_RTSD, sport->port.membase + USR1);
 	writel(USR2_ORE, sport->port.membase + USR2);
 
-	if (sport->dma_is_inited && !sport->dma_is_enabled)
-		imx_enable_dma(sport);
-
 	temp = readl(sport->port.membase + UCR1);
 	temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN;
 
@@ -1316,6 +1308,11 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 			} else {
 				ucr2 |= UCR2_CTSC;
 			}
+
+			/* Can we enable the DMA support? */
+			if (is_imx6q_uart(sport) && !uart_console(port)
+				&& !sport->dma_is_inited)
+				imx_uart_dma_init(sport);
 		} else {
 			termios->c_cflag &= ~CRTSCTS;
 		}
@@ -1432,6 +1429,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
 		imx_enable_ms(&sport->port);
 
+	if (sport->dma_is_inited && !sport->dma_is_enabled)
+		imx_enable_dma(sport);
 	spin_unlock_irqrestore(&sport->port.lock, flags);
 }
 

drivers/tty/serial/sc16is7xx.c

@@ -354,6 +354,26 @@ static void sc16is7xx_port_write(struct uart_port *port, u8 reg, u8 val)
 		     (reg << SC16IS7XX_REG_SHIFT) | port->line, val);
 }
 
+static void sc16is7xx_fifo_read(struct uart_port *port, unsigned int rxlen)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	u8 addr = (SC16IS7XX_RHR_REG << SC16IS7XX_REG_SHIFT) | port->line;
+
+	regcache_cache_bypass(s->regmap, true);
+	regmap_raw_read(s->regmap, addr, s->buf, rxlen);
+	regcache_cache_bypass(s->regmap, false);
+}
+
+static void sc16is7xx_fifo_write(struct uart_port *port, u8 to_send)
+{
+	struct sc16is7xx_port *s = dev_get_drvdata(port->dev);
+	u8 addr = (SC16IS7XX_THR_REG << SC16IS7XX_REG_SHIFT) | port->line;
+
+	regcache_cache_bypass(s->regmap, true);
+	regmap_raw_write(s->regmap, addr, s->buf, to_send);
+	regcache_cache_bypass(s->regmap, false);
+}
+
 static void sc16is7xx_port_update(struct uart_port *port, u8 reg,
 				  u8 mask, u8 val)
 {
@@ -508,10 +528,7 @@ static void sc16is7xx_handle_rx(struct uart_port *port, unsigned int rxlen,
 			s->buf[0] = sc16is7xx_port_read(port, SC16IS7XX_RHR_REG);
 			bytes_read = 1;
 		} else {
-			regcache_cache_bypass(s->regmap, true);
-			regmap_raw_read(s->regmap, SC16IS7XX_RHR_REG,
-					s->buf, rxlen);
-			regcache_cache_bypass(s->regmap, false);
+			sc16is7xx_fifo_read(port, rxlen);
 			bytes_read = rxlen;
 		}
 
@@ -591,9 +608,8 @@ static void sc16is7xx_handle_tx(struct uart_port *port)
 			s->buf[i] = xmit->buf[xmit->tail];
 			xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		}
-		regcache_cache_bypass(s->regmap, true);
-		regmap_raw_write(s->regmap, SC16IS7XX_THR_REG, s->buf, to_send);
-		regcache_cache_bypass(s->regmap, false);
+
+		sc16is7xx_fifo_write(port, to_send);
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)

drivers/tty/serial/serial_core.c

@@ -1418,7 +1418,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	mutex_lock(&port->mutex);
 	uart_shutdown(tty, state);
 	tty_port_tty_set(port, NULL);
-	tty->closing = 0;
+
 	spin_lock_irqsave(&port->lock, flags);
 
 	if (port->blocked_open) {
@@ -1444,6 +1444,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	mutex_unlock(&port->mutex);
 
 	tty_ldisc_flush(tty);
+	tty->closing = 0;
 }
 
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout)

drivers/tty/vt/selection.c

@@ -356,6 +356,7 @@ int paste_selection(struct tty_struct *tty)
 			schedule();
 			continue;
 		}
+		__set_current_state(TASK_RUNNING);
 		count = sel_buffer_lth - pasted;
 		count = tty_ldisc_receive_buf(ld, sel_buffer + pasted, NULL,
 					      count);

drivers/tty/vt/vt.c

@@ -742,6 +742,8 @@ static void visual_init(struct vc_data *vc, int num, int init)
 	__module_get(vc->vc_sw->owner);
 	vc->vc_num = num;
 	vc->vc_display_fg = &master_display_fg;
+	if (vc->vc_uni_pagedir_loc)
+		con_free_unimap(vc);
 	vc->vc_uni_pagedir_loc = &vc->vc_uni_pagedir;
 	vc->vc_uni_pagedir = NULL;
 	vc->vc_hi_font_mask = 0;