MIPS: Remove all the uses of custom gpio.h

Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS
machines, and each machine type provides its own gpio.h. However
only a handful really implement the GPIO API, most just forward
everythings to gpiolib.

The Alchemy machine is notable as it provides a system to allow
implementing the GPIO API at the board level. But it is not used by
any board currently supported, so it can also be removed.

For most machine types we can just remove the custom gpio.h, as well
as the custom wrappers if some exists. Some of the code found in
the wrappers must be moved to the respective GPIO driver.

A few more fixes are need in some drivers as they rely on linux/gpio.h
to provides some machine specific definitions, or used asm/gpio.h
instead of linux/gpio.h for the gpio API.
Signed-off-by: Alban Bedel <albeu@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Daniel Walter <dwalter@google.com>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Varka Bhadram <varkabhadram@gmail.com>
Cc: Masanari Iida <standby24x7@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Michael Buesch <m@bues.ch>
Cc: abdoulaye berthe <berthe.ab@gmail.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-ide@vger.kernel.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10828/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -14,7 +14,6 @@ config MIPS
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_BPF_JIT if !CPU_MICROMIPS
-	select ARCH_HAVE_CUSTOM_GPIO_H
 	select HAVE_FUNCTION_TRACER
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD

arch/mips/alchemy/Kconfig

@@ -6,13 +6,6 @@ config ALCHEMY_GPIOINT_AU1000
 config ALCHEMY_GPIOINT_AU1300
 	bool
 
-# select this in your board config if you don't want to use the gpio
-# namespace as documented in the manuals.  In this case however you need
-# to create the necessary gpio_* functions in your board code/headers!
-# see arch/mips/include/asm/mach-au1x00/gpio.h   for more information.
-config ALCHEMY_GPIO_INDIRECT
-	def_bool n
-
 choice
 	prompt "Machine type"
 	depends on MIPS_ALCHEMY

arch/mips/alchemy/board-gpr.c

@@ -34,6 +34,7 @@
 #include <asm/idle.h>
 #include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <prom.h>
 
 const char *get_system_type(void)

arch/mips/alchemy/board-mtx1.c

@@ -32,6 +32,7 @@
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
 #include <prom.h>
 

arch/mips/alchemy/common/Makefile

@@ -5,10 +5,5 @@
 # Makefile for the Alchemy Au1xx0 CPUs, generic files.
 #
 
-obj-y += prom.o time.o clock.o platform.o power.o \
+obj-y += prom.o time.o clock.o platform.o power.o gpiolib.o \
 	 setup.o sleeper.o dma.o dbdma.o vss.o irq.o usb.o
-
-# optional gpiolib support
-ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),)
- obj-$(CONFIG_GPIOLIB) += gpiolib.o
-endif

arch/mips/alchemy/devboards/db1000.c

@@ -33,6 +33,7 @@
 #include <linux/spi/spi_gpio.h>
 #include <linux/spi/ads7846.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-db1x00/bcsr.h>

arch/mips/alchemy/devboards/db1300.c

@@ -24,6 +24,7 @@
 #include <linux/wm97xx.h>
 
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1300.h>
 #include <asm/mach-au1x00/au1100_mmc.h>
 #include <asm/mach-au1x00/au1200fb.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>

arch/mips/alchemy/devboards/db1550.c

@@ -20,6 +20,7 @@
 #include <linux/spi/flash.h>
 #include <asm/bootinfo.h>
 #include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
 #include <asm/mach-au1x00/au1xxx_psc.h>

arch/mips/alchemy/devboards/pm.c

@@ -9,7 +9,7 @@
 #include <linux/suspend.h>
 #include <linux/sysfs.h>
 #include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio.h>
+#include <asm/mach-au1x00/gpio-au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 
 /*

arch/mips/ar7/gpio.c

@@ -21,7 +21,10 @@
 #include <linux/module.h>
 #include <linux/gpio.h>
 
-#include <asm/mach-ar7/gpio.h>
+#include <asm/mach-ar7/ar7.h>
+
+#define AR7_GPIO_MAX 32
+#define TITAN_GPIO_MAX 51
 
 struct ar7_gpio_chip {
 	void __iomem		*regs;

arch/mips/ar7/platform.c

@@ -39,7 +39,6 @@
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
-#include <asm/mach-ar7/gpio.h>
 #include <asm/mach-ar7/prom.h>
 
 /*****************************************************************************

arch/mips/ar7/setup.c

@@ -23,7 +23,6 @@
 #include <asm/reboot.h>
 #include <asm/mach-ar7/ar7.h>
 #include <asm/mach-ar7/prom.h>
-#include <asm/mach-ar7/gpio.h>
 
 static void ar7_machine_restart(char *command)
 {

arch/mips/include/asm/gpio.h

-#ifndef __ASM_MIPS_GPIO_H
-#define __ASM_MIPS_GPIO_H
-
-#include <gpio.h>
-
-#endif /* __ASM_MIPS_GPIO_H */

arch/mips/include/asm/mach-ar7/ar7.h

@@ -203,4 +203,8 @@ static inline void ar7_device_off(u32 bit)
 int __init ar7_gpio_init(void);
 void __init ar7_init_clocks(void);
 
+/* Board specific GPIO functions */
+int ar7_gpio_enable(unsigned gpio);
+int ar7_gpio_disable(unsigned gpio);
+
 #endif /* __AR7_H__ */

arch/mips/include/asm/mach-ar7/gpio.h

-/*
- * Copyright (C) 2007-2009 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __AR7_GPIO_H__
-#define __AR7_GPIO_H__
-
-#include <asm/mach-ar7/ar7.h>
-
-#define AR7_GPIO_MAX 32
-#define TITAN_GPIO_MAX	51
-#define NR_BUILTIN_GPIO TITAN_GPIO_MAX
-
-#define gpio_to_irq(gpio)	-1
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-
-/* Board specific GPIO functions */
-int ar7_gpio_enable(unsigned gpio);
-int ar7_gpio_disable(unsigned gpio);
-
-#include <asm-generic/gpio.h>
-
-#endif

arch/mips/include/asm/mach-ath25/gpio.h

-#ifndef __ASM_MACH_ATH25_GPIO_H
-#define __ASM_MACH_ATH25_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-#endif	/* __ASM_MACH_ATH25_GPIO_H */

arch/mips/include/asm/mach-ath79/gpio.h

-/*
- *  Atheros AR71XX/AR724X/AR913X GPIO API definitions
- *
- *  Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef __ASM_MACH_ATH79_GPIO_H
-#define __ASM_MACH_ATH79_GPIO_H
-
-#define ARCH_NR_GPIOS	64
-#include <asm-generic/gpio.h>
-
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_cansleep	__gpio_cansleep
-
-#endif /* __ASM_MACH_ATH79_GPIO_H */

arch/mips/include/asm/mach-au1x00/gpio-au1000.h

@@ -266,6 +266,17 @@ static inline int alchemy_gpio1_to_irq(int gpio)
 	return -ENXIO;
 }
 
+/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
+ * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
+ * register enables use of GPIOs as wake source.
+ */
+static inline void alchemy_gpio1_input_enable(void)
+{
+	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
+	__raw_writel(0, base + 0x110);		/* the write op is key */
+	wmb();
+}
+
 /*
  * GPIO2 block macros for common linux GPIO functions. The 'gpio'
  * parameter must be in range of ALCHEMY_GPIO2_BASE..ALCHEMY_GPIO2_MAX.
@@ -518,141 +529,4 @@ static inline int alchemy_irq_to_gpio(int irq)
 	return -ENXIO;
 }
 
-/**********************************************************************/
-
-/* Linux gpio framework integration.
- *
- * 4 use cases of Au1000-Au1200 GPIOS:
- *(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
- *	Board must register gpiochips.
- *(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
- *	2 (1 for Au1000) gpio_chips are registered.
- *
- *(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
- *	the boards' gpio.h must provide the linux gpio wrapper functions,
- *
- *(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
- *	inlinable gpio functions are provided which enable access to the
- *	Au1000 gpios only by using the numbers straight out of the data-
- *	sheets.
-
- * Cases 1 and 3 are intended for boards which want to provide their own
- * GPIO namespace and -operations (i.e. for example you have 8 GPIOs
- * which are in part provided by spare Au1000 GPIO pins and in part by
- * an external FPGA but you still want them to be accssible in linux
- * as gpio0-7. The board can of course use the alchemy_gpioX_* functions
- * as required).
- */
-
-#ifndef CONFIG_GPIOLIB
-
-#ifdef CONFIG_ALCHEMY_GPIOINT_AU1000
-
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (4) */
-
-static inline int gpio_direction_input(int gpio)
-{
-	return alchemy_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(int gpio, int v)
-{
-	return alchemy_gpio_direction_output(gpio, v);
-}
-
-static inline int gpio_get_value(int gpio)
-{
-	return alchemy_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(int gpio, int v)
-{
-	alchemy_gpio_set_value(gpio, v);
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
-	return gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
-	gpio_set_value(gpio, value);
-}
-
-static inline int gpio_is_valid(int gpio)
-{
-	return alchemy_gpio_is_valid(gpio);
-}
-
-static inline int gpio_cansleep(int gpio)
-{
-	return alchemy_gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(int gpio)
-{
-	return alchemy_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(int irq)
-{
-	return alchemy_irq_to_gpio(irq);
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-	return 0;
-}
-
-static inline int gpio_request_one(unsigned gpio,
-					unsigned long flags, const char *label)
-{
-	return 0;
-}
-
-static inline int gpio_request_array(struct gpio *array, size_t num)
-{
-	return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-static inline void gpio_free_array(struct gpio *array, size_t num)
-{
-}
-
-static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_export(unsigned gpio, bool direction_may_change)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_export_link(struct device *dev, const char *name,
-				   unsigned gpio)
-{
-	return -ENOSYS;
-}
-
-static inline int gpio_sysfs_set_active_low(unsigned gpio, int value)
-{
-	return -ENOSYS;
-}
-
-static inline void gpio_unexport(unsigned gpio)
-{
-}
-
-#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-#endif	/* CONFIG_ALCHEMY_GPIOINT_AU1000 */
-
-#endif	/* !CONFIG_GPIOLIB */
-
 #endif /* _ALCHEMY_GPIO_AU1000_H_ */

arch/mips/include/asm/mach-au1x00/gpio.h

-/*
- * Alchemy GPIO support.
- *
- * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within
- *  the same kernel image.
- * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the
- *  appropriate CPU type (AU1000 currently).
- */
-
-#ifndef _ALCHEMY_GPIO_H_
-#define _ALCHEMY_GPIO_H_
-
-#include <asm/mach-au1x00/au1000.h>
-#include <asm/mach-au1x00/gpio-au1000.h>
-#include <asm/mach-au1x00/gpio-au1300.h>
-
-/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before
- * SYS_PININPUTEN is written to at least once.  On Au1550/Au1200/Au1300 this
- * register enables use of GPIOs as wake source.
- */
-static inline void alchemy_gpio1_input_enable(void)
-{
-	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR);
-	__raw_writel(0, base + 0x110);		/* the write op is key */
-	wmb();
-}
-
-
-/* Linux gpio framework integration.
-*
-* 4 use cases of Alchemy GPIOS:
-*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y:
-*	Board must register gpiochips.
-*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n:
-*	A gpiochip for the 75 GPIOs is registered.
-*
-*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y:
-*	the boards' gpio.h must provide	the linux gpio wrapper functions,
-*
-*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n:
-*	inlinable gpio functions are provided which enable access to the
-*	Au1300 gpios only by using the numbers straight out of the data-
-*	sheets.
-
-* Cases 1 and 3 are intended for boards which want to provide their own
-* GPIO namespace and -operations (i.e. for example you have 8 GPIOs
-* which are in part provided by spare Au1300 GPIO pins and in part by
-* an external FPGA but you still want them to be accssible in linux
-* as gpio0-7. The board can of course use the alchemy_gpioX_* functions
-* as required).
-*/
-
-#ifdef CONFIG_GPIOLIB
-
-/* wraps the cpu-dependent irq_to_gpio functions */
-/* FIXME: gpiolib needs an irq_to_gpio hook */
-static inline int __au_irq_to_gpio(unsigned int irq)
-{
-	switch (alchemy_get_cputype()) {
-	case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200:
-		return alchemy_irq_to_gpio(irq);
-	case ALCHEMY_CPU_AU1300:
-		return au1300_irq_to_gpio(irq);
-	}
-	return -EINVAL;
-}
-
-
-/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */
-#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT	/* case (2) */
-
-/* get everything through gpiolib */
-#define gpio_to_irq	__gpio_to_irq
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define irq_to_gpio	__au_irq_to_gpio
-
-#include <asm-generic/gpio.h>
-
-#endif	/* !CONFIG_ALCHEMY_GPIO_INDIRECT */
-
-
-#endif	/* CONFIG_GPIOLIB */
-
-#endif	/* _ALCHEMY_GPIO_H_ */

arch/mips/include/asm/mach-bcm47xx/gpio.h

-#ifndef __ASM_MIPS_MACH_BCM47XX_GPIO_H
-#define __ASM_MIPS_MACH_BCM47XX_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-#define gpio_to_irq __gpio_to_irq
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	return -EINVAL;
-}
-
-#endif

arch/mips/include/asm/mach-bcm63xx/gpio.h

-#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H
-#define __ASM_MIPS_MACH_BCM63XX_GPIO_H
-
-#include <bcm63xx_gpio.h>
-
-#define gpio_to_irq(gpio)	-1
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-
-#include <asm-generic/gpio.h>
-
-#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */

arch/mips/include/asm/mach-cavium-octeon/gpio.h

-#ifndef __ASM_MACH_CAVIUM_OCTEON_GPIO_H
-#define __ASM_MACH_CAVIUM_OCTEON_GPIO_H
-
-#ifdef CONFIG_GPIOLIB
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#else
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-#endif
-
-#include <asm-generic/gpio.h>
-
-#define gpio_to_irq	__gpio_to_irq
-
-#endif /* __ASM_MACH_GENERIC_GPIO_H */

arch/mips/include/asm/mach-generic/gpio.h

-#ifndef __ASM_MACH_GENERIC_GPIO_H
-#define __ASM_MACH_GENERIC_GPIO_H
-
-#ifdef CONFIG_GPIOLIB
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#else
-int gpio_request(unsigned gpio, const char *label);
-void gpio_free(unsigned gpio);
-int gpio_direction_input(unsigned gpio);
-int gpio_direction_output(unsigned gpio, int value);
-int gpio_get_value(unsigned gpio);
-void gpio_set_value(unsigned gpio, int value);
-#endif
-int gpio_to_irq(unsigned gpio);
-int irq_to_gpio(unsigned irq);
-
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-#endif /* __ASM_MACH_GENERIC_GPIO_H */

arch/mips/include/asm/mach-jz4740/gpio.h

@@ -73,8 +73,6 @@ int jz_gpio_port_direction_output(int port, uint32_t mask);
 void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask);
 uint32_t jz_gpio_port_get_value(int port, uint32_t mask);
 
-#include <asm/mach-generic/gpio.h>
-
 #define JZ_GPIO_PORTA(x) ((x) + 32 * 0)
 #define JZ_GPIO_PORTB(x) ((x) + 32 * 1)
 #define JZ_GPIO_PORTC(x) ((x) + 32 * 2)

arch/mips/include/asm/mach-lantiq/gpio.h

-#ifndef __ASM_MIPS_MACH_LANTIQ_GPIO_H
-#define __ASM_MIPS_MACH_LANTIQ_GPIO_H
-
-#define gpio_to_irq __gpio_to_irq
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-
-#define gpio_cansleep __gpio_cansleep
-
-#include <asm-generic/gpio.h>
-
-#endif

arch/mips/include/asm/mach-loongson64/gpio.h

-/*
- * Loongson GPIO Support
- *
- * Copyright (c) 2008  Richard Liu, STMicroelectronics <richard.liu@st.com>
- * Copyright (c) 2008-2010  Arnaud Patard <apatard@mandriva.com>
- * Copyright (c) 2014  Huacai Chen <chenhc@lemote.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef __LOONGSON_GPIO_H
-#define __LOONGSON_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_cansleep __gpio_cansleep
-
-/* The chip can do interrupt
- * but it has not been tested and doc not clear
- */
-static inline int gpio_to_irq(int gpio)
-{
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(int gpio)
-{
-	return -EINVAL;
-}
-
-#endif	/* __LOONGSON_GPIO_H */

arch/mips/include/asm/mach-pistachio/gpio.h

-/*
- * Pistachio IRQ setup
- *
- * Copyright (C) 2014 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_PISTACHIO_GPIO_H
-#define __ASM_MACH_PISTACHIO_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-#endif /* __ASM_MACH_PISTACHIO_GPIO_H */

arch/mips/include/asm/mach-rc32434/gpio.h

@@ -13,18 +13,6 @@
 #ifndef _RC32434_GPIO_H_
 #define _RC32434_GPIO_H_
 
-#include <linux/types.h>
-#include <asm-generic/gpio.h>
-
-#define NR_BUILTIN_GPIO		32
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-#define gpio_to_irq(gpio)	(8 + 4 * 32 + gpio)
-#define irq_to_gpio(irq)	(irq - (8 + 4 * 32))
-
 struct rb532_gpio_reg {
 	u32   gpiofunc;	  /* GPIO Function Register
 			   * gpiofunc[x]==0 bit = gpio

arch/mips/jz4740/gpio.c

@@ -231,6 +231,13 @@ static int jz_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
 	return 0;
 }
 
+static int jz_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	struct jz_gpio_chip *jz_gpio = gpio_chip_to_jz_gpio_chip(chip);
+
+	return jz_gpio->irq_base + gpio;
+}
+
 int jz_gpio_port_direction_input(int port, uint32_t mask)
 {
 	writel(mask, GPIO_TO_REG(port, JZ_REG_GPIO_DIRECTION_CLEAR));
@@ -262,18 +269,6 @@ uint32_t jz_gpio_port_get_value(int port, uint32_t mask)
 }
 EXPORT_SYMBOL(jz_gpio_port_get_value);
 
-int gpio_to_irq(unsigned gpio)
-{
-	return JZ4740_IRQ_GPIO(0) + gpio;
-}
-EXPORT_SYMBOL_GPL(gpio_to_irq);
-
-int irq_to_gpio(unsigned irq)
-{
-	return irq - JZ4740_IRQ_GPIO(0);
-}
-EXPORT_SYMBOL_GPL(irq_to_gpio);
-
 #define IRQ_TO_BIT(irq) BIT(irq_to_gpio(irq) & 0x1f)
 
 static void jz_gpio_check_trigger_both(struct jz_gpio_chip *chip, unsigned int irq)
@@ -403,6 +398,7 @@ static int jz_gpio_irq_set_wake(struct irq_data *data, unsigned int on)
 		.get = jz_gpio_get_value, \
 		.direction_output = jz_gpio_direction_output, \
 		.direction_input = jz_gpio_direction_input, \
+		.to_irq = jz_gpio_to_irq, \
 		.base = JZ4740_GPIO_BASE_ ## _bank, \
 		.ngpio = JZ4740_GPIO_NUM_ ## _bank, \
 	}, \

arch/mips/pci/pci-lantiq.c

@@ -20,7 +20,6 @@
 #include <linux/of_irq.h>
 #include <linux/of_pci.h>
 
-#include <asm/gpio.h>
 #include <asm/addrspace.h>
 
 #include <lantiq_soc.h>

arch/mips/rb532/devices.c

@@ -23,6 +23,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/serial_8250.h>

arch/mips/rb532/gpio.c

@@ -140,6 +140,11 @@ static int rb532_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+static int rb532_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return 8 + 4 * 32 + gpio;
+}
+
 static struct rb532_gpio_chip rb532_gpio_chip[] = {
 	[0] = {
 		.chip = {
@@ -148,6 +153,7 @@ static struct rb532_gpio_chip rb532_gpio_chip[] = {
 			.direction_output	= rb532_gpio_direction_output,
 			.get			= rb532_gpio_get,
 			.set			= rb532_gpio_set,
+			.to_irq			= rb532_gpio_to_irq,
 			.base			= 0,
 			.ngpio			= 32,
 		},

arch/mips/txx9/generic/setup.c

@@ -117,22 +117,6 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
-/* GPIO support */
-
-#ifdef CONFIG_GPIOLIB
-int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-EXPORT_SYMBOL(irq_to_gpio);
-#endif
-
 #define BOARD_VEC(board)	extern struct txx9_board_vec board;
 #include <asm/txx9/boards.h>
 #undef BOARD_VEC

drivers/ata/pata_rb532_cf.c

@@ -27,12 +27,11 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/libata.h>
 #include <scsi/scsi_host.h>
 
-#include <asm/gpio.h>
-
 #define DRV_NAME	"pata-rb532-cf"
 #define DRV_VERSION	"0.1.0"
 #define DRV_DESC	"PATA driver for RouterBOARD 532 Compact Flash"

drivers/gpio/gpio-ath79.c

@@ -202,35 +202,3 @@ static struct platform_driver ath79_gpio_driver = {
 };
 
 module_platform_driver(ath79_gpio_driver);
-
-int gpio_get_value(unsigned gpio)
-{
-	if (gpio < ath79_gpio_count)
-		return __ath79_gpio_get_value(gpio);
-
-	return __gpio_get_value(gpio);
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int value)
-{
-	if (gpio < ath79_gpio_count)
-		__ath79_gpio_set_value(gpio, value);
-	else
-		__gpio_set_value(gpio, value);
-}
-EXPORT_SYMBOL(gpio_set_value);
-
-int gpio_to_irq(unsigned gpio)
-{
-	/* FIXME */
-	return -EINVAL;
-}
-EXPORT_SYMBOL(gpio_to_irq);
-
-int irq_to_gpio(unsigned irq)
-{
-	/* FIXME */
-	return -EINVAL;
-}
-EXPORT_SYMBOL(irq_to_gpio);

drivers/input/misc/rb532_button.c

@@ -7,6 +7,7 @@
 #include <linux/input-polldev.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-rc32434/gpio.h>
 #include <asm/mach-rc32434/rb.h>

drivers/net/ethernet/ti/cpmac.c

@@ -41,6 +41,8 @@
 #include <linux/gpio.h>
 #include <linux/atomic.h>
 
+#include <asm/mach-ar7/ar7.h>
+
 MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
 MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
 MODULE_LICENSE("GPL");