Commit 835a1d5c authored by Heiko Stuebner's avatar Heiko Stuebner

Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399"

This reverts commit c301b327.

While this works splendidly on rk3399-gru devices using the cros-ec
extcon, other rk3399-based devices using the fusb302 or no power-delivery
controller at all don't probe at all anymore, as the typec-phy currently
always expects the extcon to be available and therefore defers probing
indefinitly on these.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 2560da49
...@@ -411,8 +411,8 @@ usbdrd_dwc3_0: dwc3 { ...@@ -411,8 +411,8 @@ usbdrd_dwc3_0: dwc3 {
reg = <0x0 0xfe800000 0x0 0x100000>; reg = <0x0 0xfe800000 0x0 0x100000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
dr_mode = "otg"; dr_mode = "otg";
phys = <&u2phy0_otg>, <&tcphy0_usb3>; phys = <&u2phy0_otg>;
phy-names = "usb2-phy", "usb3-phy"; phy-names = "usb2-phy";
phy_type = "utmi_wide"; phy_type = "utmi_wide";
snps,dis_enblslpm_quirk; snps,dis_enblslpm_quirk;
snps,dis-u2-freeclk-exists-quirk; snps,dis-u2-freeclk-exists-quirk;
...@@ -444,8 +444,8 @@ usbdrd_dwc3_1: dwc3 { ...@@ -444,8 +444,8 @@ usbdrd_dwc3_1: dwc3 {
reg = <0x0 0xfe900000 0x0 0x100000>; reg = <0x0 0xfe900000 0x0 0x100000>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
dr_mode = "otg"; dr_mode = "otg";
phys = <&u2phy1_otg>, <&tcphy1_usb3>; phys = <&u2phy1_otg>;
phy-names = "usb2-phy", "usb3-phy"; phy-names = "usb2-phy";
phy_type = "utmi_wide"; phy_type = "utmi_wide";
snps,dis_enblslpm_quirk; snps,dis_enblslpm_quirk;
snps,dis-u2-freeclk-exists-quirk; snps,dis-u2-freeclk-exists-quirk;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment