[MIPS] SMP: Call platform methods via ops structure.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -1441,6 +1441,7 @@ config MIPS_MT_SMP
 	select SMP
 	select SYS_SUPPORTS_SCHED_SMT if SMP
 	select SYS_SUPPORTS_SMP
+	select SMP_UP
 	help
 	  This is a kernel model which is also known a VSMP or lately
 	  has been marketesed into SMVP.
@@ -1457,6 +1458,7 @@ config MIPS_MT_SMTC
 	select NR_CPUS_DEFAULT_8
 	select SMP
 	select SYS_SUPPORTS_SMP
+	select SMP_UP
 	help
 	  This is a kernel model which is known a SMTC or lately has been
 	  marketesed into SMVP.
@@ -1735,6 +1737,9 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config SMP_UP
+	bool
+
 config SYS_SUPPORTS_SMP
 	bool
 

arch/mips/fw/arc/init.c

@@ -12,6 +12,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/sgialib.h>
+#include <asm/smp-ops.h>
 
 #undef DEBUG_PROM_INIT
 
@@ -48,4 +49,11 @@ void __init prom_init(void)
 	ArcRead(0, &c, 1, &cnt);
 	ArcEnterInteractiveMode();
 #endif
+#ifdef CONFIG_SGI_IP27
+	{
+		extern struct plat_smp_ops ip27_smp_ops;
+
+		register_smp_ops(&ip27_smp_ops);
+	}
+#endif
 }

arch/mips/kernel/mips-mt.c

@@ -17,7 +17,6 @@
 #include <asm/system.h>
 #include <asm/hardirq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/mipsmtregs.h>
 #include <asm/r4kcache.h>
 #include <asm/cacheflush.h>

arch/mips/kernel/setup.c

@@ -29,6 +29,7 @@
 #include <asm/cpu.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/smp-ops.h>
 #include <asm/system.h>
 
 struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly;
@@ -575,9 +576,7 @@ void __init setup_arch(char **cmdline_p)
 	arch_mem_init(cmdline_p);
 
 	resource_init();
-#ifdef CONFIG_SMP
 	plat_smp_setup();
-#endif
 }
 
 static int __init fpu_disable(char *s)

arch/mips/kernel/smp-mt.c

@@ -215,72 +215,67 @@ static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0)
 	write_tc_c0_tchalt(TCHALT_H);
 }
 
-/*
- * Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
- * secondarys
- */
-void __init plat_smp_setup(void)
+static void vsmp_send_ipi_single(int cpu, unsigned int action)
 {
-	unsigned int mvpconf0, ntc, tc, ncpu = 0;
-	unsigned int nvpe;
+	int i;
+	unsigned long flags;
+	int vpflags;
 
-#ifdef CONFIG_MIPS_MT_FPAFF
-	/* If we have an FPU, enroll ourselves in the FPU-full mask */
-	if (cpu_has_fpu)
-		cpu_set(0, mt_fpu_cpumask);
-#endif /* CONFIG_MIPS_MT_FPAFF */
-	if (!cpu_has_mipsmt)
-		return;
+	local_irq_save(flags);
 
-	/* disable MT so we can configure */
-	dvpe();
-	dmt();
+	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
 
-	/* Put MVPE's into 'configuration state' */
-	set_c0_mvpcontrol(MVPCONTROL_VPC);
+	switch (action) {
+	case SMP_CALL_FUNCTION:
+		i = C_SW1;
+		break;
 
-	mvpconf0 = read_c0_mvpconf0();
-	ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
+	case SMP_RESCHEDULE_YOURSELF:
+	default:
+		i = C_SW0;
+		break;
+	}
 
-	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
-	smp_num_siblings = nvpe;
+	/* 1:1 mapping of vpe and tc... */
+	settc(cpu);
+	write_vpe_c0_cause(read_vpe_c0_cause() | i);
+	evpe(vpflags);
 
-	/* we'll always have more TC's than VPE's, so loop setting everything
-	   to a sensible state */
-	for (tc = 0; tc <= ntc; tc++) {
-		settc(tc);
+	local_irq_restore(flags);
+}
 
-		smp_tc_init(tc, mvpconf0);
-		ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
-	}
+static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
 
-	/* Release config state */
-	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+	for_each_cpu_mask(i, mask)
+		vsmp_send_ipi_single(i, action);
+}
 
-	/* We'll wait until starting the secondaries before starting MVPE */
+static void __cpuinit vsmp_init_secondary(void)
+{
+	/* Enable per-cpu interrupts */
 
-	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+	/* This is Malta specific: IPI,performance and timer inetrrupts */
+	write_c0_status((read_c0_status() & ~ST0_IM ) |
+	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
 }
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void __cpuinit vsmp_smp_finish(void)
 {
-	mips_mt_set_cpuoptions();
-
-	/* set up ipi interrupts */
-	if (cpu_has_vint) {
-		set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
-		set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
-	}
+	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
 
-	cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
-	cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
 
-	setup_irq(cpu_ipi_resched_irq, &irq_resched);
-	setup_irq(cpu_ipi_call_irq, &irq_call);
+	local_irq_enable();
+}
 
-	set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
-	set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
+static void vsmp_cpus_done(void)
+{
 }
 
 /*
@@ -291,7 +286,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * (unsigned long)idle->thread_info the gp
  * assumes a 1:1 mapping of TC => VPE
  */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit vsmp_boot_secondary(int cpu, struct task_struct *idle)
 {
 	struct thread_info *gp = task_thread_info(idle);
 	dvpe();
@@ -325,57 +320,81 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 	evpe(EVPE_ENABLE);
 }
 
-void __cpuinit prom_init_secondary(void)
-{
-	/* Enable per-cpu interrupts */
-
-	/* This is Malta specific: IPI,performance and timer inetrrupts */
-	write_c0_status((read_c0_status() & ~ST0_IM ) |
-	                (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP6 | STATUSF_IP7));
-}
-
-void __cpuinit prom_smp_finish(void)
+/*
+ * Common setup before any secondaries are started
+ * Make sure all CPU's are in a sensible state before we boot any of the
+ * secondarys
+ */
+static void __init vsmp_smp_setup(void)
 {
-	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
+	unsigned int mvpconf0, ntc, tc, ncpu = 0;
+	unsigned int nvpe;
 
 #ifdef CONFIG_MIPS_MT_FPAFF
 	/* If we have an FPU, enroll ourselves in the FPU-full mask */
 	if (cpu_has_fpu)
-		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+		cpu_set(0, mt_fpu_cpumask);
 #endif /* CONFIG_MIPS_MT_FPAFF */
+	if (!cpu_has_mipsmt)
+		return;
 
-	local_irq_enable();
-}
+	/* disable MT so we can configure */
+	dvpe();
+	dmt();
 
-void prom_cpus_done(void)
-{
-}
+	/* Put MVPE's into 'configuration state' */
+	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
-void core_send_ipi(int cpu, unsigned int action)
-{
-	int i;
-	unsigned long flags;
-	int vpflags;
+	mvpconf0 = read_c0_mvpconf0();
+	ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT;
 
-	local_irq_save(flags);
+	nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+	smp_num_siblings = nvpe;
 
-	vpflags = dvpe();	/* cant access the other CPU's registers whilst MVPE enabled */
+	/* we'll always have more TC's than VPE's, so loop setting everything
+	   to a sensible state */
+	for (tc = 0; tc <= ntc; tc++) {
+		settc(tc);
 
-	switch (action) {
-	case SMP_CALL_FUNCTION:
-		i = C_SW1;
-		break;
+		smp_tc_init(tc, mvpconf0);
+		ncpu = smp_vpe_init(tc, mvpconf0, ncpu);
+	}
 
-	case SMP_RESCHEDULE_YOURSELF:
-	default:
-		i = C_SW0;
-		break;
+	/* Release config state */
+	clear_c0_mvpcontrol(MVPCONTROL_VPC);
+
+	/* We'll wait until starting the secondaries before starting MVPE */
+
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
+}
+
+static void __init vsmp_prepare_cpus(unsigned int max_cpus)
+{
+	mips_mt_set_cpuoptions();
+
+	/* set up ipi interrupts */
+	if (cpu_has_vint) {
+		set_vi_handler(MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+		set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
 	}
 
-	/* 1:1 mapping of vpe and tc... */
-	settc(cpu);
-	write_vpe_c0_cause(read_vpe_c0_cause() | i);
-	evpe(vpflags);
+	cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+	cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
 
-	local_irq_restore(flags);
+	setup_irq(cpu_ipi_resched_irq, &irq_resched);
+	setup_irq(cpu_ipi_call_irq, &irq_call);
+
+	set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
+	set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
 }
+
+struct plat_smp_ops vsmp_smp_ops = {
+	.send_ipi_single	= vsmp_send_ipi_single,
+	.send_ipi_mask		= vsmp_send_ipi_mask,
+	.init_secondary		= vsmp_init_secondary,
+	.smp_finish		= vsmp_smp_finish,
+	.cpus_done		= vsmp_cpus_done,
+	.boot_secondary		= vsmp_boot_secondary,
+	.smp_setup		= vsmp_smp_setup,
+	.prepare_cpus		= vsmp_prepare_cpus,
+};

arch/mips/kernel/smp.c

@@ -37,7 +37,6 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/time.h>
 
 #ifdef CONFIG_MIPS_MT_SMTC
@@ -84,6 +83,16 @@ static inline void set_cpu_sibling_map(int cpu)
 		cpu_set(cpu, cpu_sibling_map[cpu]);
 }
 
+struct plat_smp_ops *mp_ops;
+
+__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
+{
+	if (ops)
+		printk(KERN_WARNING "Overriding previous set SMP ops\n");
+
+	mp_ops = ops;
+}
+
 /*
  * First C code run on the secondary CPUs after being started up by
  * the master.
@@ -100,7 +109,7 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_report();
 	per_cpu_trap_init();
 	mips_clockevent_init();
-	prom_init_secondary();
+	mp_ops->init_secondary();
 
 	/*
 	 * XXX parity protection should be folded in here when it's converted
@@ -112,7 +121,7 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
-	prom_smp_finish();
+	mp_ops->smp_finish();
 	set_cpu_sibling_map(cpu);
 
 	cpu_set(cpu, cpu_callin_map);
@@ -184,7 +193,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
 	smp_mb();
 
 	/* Send a message to all other CPUs and wait for them to respond */
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
+	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
 
 	/* Wait for response */
 	/* FIXME: lock-up detection, backtrace on lock-up */
@@ -278,7 +287,7 @@ void smp_send_stop(void)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
-	prom_cpus_done();
+	mp_ops->cpus_done();
 }
 
 /* called from main before smp_init() */
@@ -286,7 +295,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 {
 	init_new_context(current, &init_mm);
 	current_thread_info()->cpu = 0;
-	plat_prepare_cpus(max_cpus);
+	mp_ops->prepare_cpus(max_cpus);
 	set_cpu_sibling_map(0);
 #ifndef CONFIG_HOTPLUG_CPU
 	cpu_present_map = cpu_possible_map;
@@ -325,7 +334,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	if (IS_ERR(idle))
 		panic(KERN_ERR "Fork failed for CPU %d", cpu);
 
-	prom_boot_secondary(cpu, idle);
+	mp_ops->boot_secondary(cpu, idle);
 
 	/*
 	 * Trust is futile.  We should really have timeouts ...

arch/mips/kernel/smtc-proc.c

@@ -14,7 +14,6 @@
 #include <asm/system.h>
 #include <asm/hardirq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
 #include <linux/proc_fs.h>

arch/mips/kernel/smtc.c

@@ -16,7 +16,6 @@
 #include <asm/hazards.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
-#include <asm/smp.h>
 #include <asm/mipsregs.h>
 #include <asm/cacheflush.h>
 #include <asm/time.h>

arch/mips/mips-boards/generic/init.c

@@ -250,6 +250,8 @@ void __init mips_ejtag_setup(void)
 	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
 }
 
+extern struct plat_smp_ops msmtc_smp_ops;
+
 void __init prom_init(void)
 {
 	prom_argc = fw_arg0;
@@ -416,4 +418,10 @@ void __init prom_init(void)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	console_config();
 #endif
+#ifdef CONFIG_MIPS_MT_SMP
+	register_smp_ops(&vsmp_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+	register_smp_ops(&msmtc_smp_ops);
+#endif
 }

arch/mips/mips-boards/malta/malta_smtc.c

@@ -15,26 +15,24 @@
  * Cause the specified action to be performed on a targeted "CPU"
  */
 
-void core_send_ipi(int cpu, unsigned int action)
+static void msmtc_send_ipi_single(int cpu, unsigned int action)
 {
 	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
 	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
 }
 
-/*
- * Platform "CPU" startup hook
- */
-
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
 {
-	smtc_boot_secondary(cpu, idle);
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		msmtc_send_ipi_single(i, action);
 }
 
 /*
  * Post-config but pre-boot cleanup entry point
  */
-
-void __cpuinit prom_init_secondary(void)
+static void __cpuinit msmtc_init_secondary(void)
 {
         void smtc_init_secondary(void);
 	int myvpe;
@@ -54,41 +52,57 @@ void __cpuinit prom_init_secondary(void)
 }
 
 /*
- * Platform SMP pre-initialization
- *
- * As noted above, we can assume a single CPU for now
- * but it may be multithreaded.
+ * Platform "CPU" startup hook
  */
-
-void __cpuinit plat_smp_setup(void)
+static void __cpuinit msmtc_boot_secondary(int cpu, struct task_struct *idle)
 {
-	if (read_c0_config3() & (1<<2))
-		mipsmt_build_cpu_map(0);
+	smtc_boot_secondary(cpu, idle);
 }
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
+/*
+ * SMP initialization finalization entry point
+ */
+static void __cpuinit msmtc_smp_finish(void)
 {
-	if (read_c0_config3() & (1<<2))
-		mipsmt_prepare_cpus();
+	smtc_smp_finish();
 }
 
 /*
- * SMP initialization finalization entry point
+ * Hook for after all CPUs are online
  */
 
-void __cpuinit prom_smp_finish(void)
+static void msmtc_cpus_done(void)
 {
-	smtc_smp_finish();
 }
 
 /*
- * Hook for after all CPUs are online
+ * Platform SMP pre-initialization
+ *
+ * As noted above, we can assume a single CPU for now
+ * but it may be multithreaded.
  */
 
-void prom_cpus_done(void)
+static void __init msmtc_smp_setup(void)
+{
+	mipsmt_build_cpu_map(0);
+}
+
+static void __init msmtc_prepare_cpus(unsigned int max_cpus)
 {
+	mipsmt_prepare_cpus();
 }
 
+struct plat_smp_ops msmtc_smp_ops = {
+	.send_ipi_single	= msmtc_send_ipi_single,
+	.send_ipi_mask		= msmtc_send_ipi_mask,
+	.init_secondary		= msmtc_init_secondary,
+	.smp_finish		= msmtc_smp_finish,
+	.cpus_done		= msmtc_cpus_done,
+	.boot_secondary		= msmtc_boot_secondary,
+	.smp_setup		= msmtc_smp_setup,
+	.prepare_cpus		= msmtc_prepare_cpus,
+};
+
 #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
 /*
  * IRQ affinity hook

arch/mips/mipssim/Makefile

@@ -21,6 +21,6 @@ obj-y := sim_platform.o sim_setup.o sim_mem.o sim_time.o sim_int.o \
 	 sim_cmdline.o
 
 obj-$(CONFIG_EARLY_PRINTK) += sim_console.o
-obj-$(CONFIG_SMP) += sim_smp.o
+obj-$(CONFIG_MIPS_MT_SMTC) += sim_smtc.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/mipssim/sim_setup.c

@@ -60,6 +60,8 @@ void __init plat_mem_setup(void)
 #endif
 }
 
+extern struct plat_smp_ops ssmtc_smp_ops;
+
 void __init prom_init(void)
 {
 	set_io_port_base(0xbfd00000);
@@ -67,8 +69,20 @@ void __init prom_init(void)
 	pr_info("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
-}
 
+#ifdef CONFIG_MIPS_MT_SMP
+	if (cpu_has_mipsmt)
+		register_smp_ops(&vsmp_smp_ops);
+	else
+		register_smp_ops(&up_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (cpu_has_mipsmt)
+		register_smp_ops(&ssmtc_smp_ops);
+	else
+		register_smp_ops(&up_smp_ops);
+#endif
+}
 
 static void __init serial_init(void)
 {

arch/mips/mipssim/sim_smp.c → arch/mips/mipssim/sim_smtc.c

@@ -16,7 +16,7 @@
  *
  */
 /*
- * Simulator Platform-specific hooks for SMP operation
+ * Simulator Platform-specific hooks for SMTC operation
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -29,65 +29,72 @@
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/mmu_context.h>
-#ifdef CONFIG_MIPS_MT_SMTC
 #include <asm/smtc_ipi.h>
-#endif /* CONFIG_MIPS_MT_SMTC */
 
 /* VPE/SMP Prototype implements platform interfaces directly */
-#if !defined(CONFIG_MIPS_MT_SMP)
 
 /*
  * Cause the specified action to be performed on a targeted "CPU"
  */
 
-void core_send_ipi(int cpu, unsigned int action)
+static void ssmtc_send_ipi_single(int cpu, unsigned int action)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
 	smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
-#endif /* CONFIG_MIPS_MT_SMTC */
-/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+	/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
+}
+
+static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
 
+	for_each_cpu_mask(i, mask)
+		ssmtc_send_ipi_single(i, action);
 }
 
 /*
- * Platform "CPU" startup hook
+ * Post-config but pre-boot cleanup entry point
  */
-
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit ssmtc_init_secondary(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	smtc_boot_secondary(cpu, idle);
-#endif /* CONFIG_MIPS_MT_SMTC */
+	void smtc_init_secondary(void);
+
+	smtc_init_secondary();
 }
 
 /*
- * Post-config but pre-boot cleanup entry point
+ * SMP initialization finalization entry point
  */
+static void __cpuinit ssmtc_smp_finish(void)
+{
+	smtc_smp_finish();
+}
 
-void __cpuinit prom_init_secondary(void)
+/*
+ * Hook for after all CPUs are online
+ */
+static void ssmtc_cpus_done(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	void smtc_init_secondary(void);
+}
 
-	smtc_init_secondary();
-#endif /* CONFIG_MIPS_MT_SMTC */
+/*
+ * Platform "CPU" startup hook
+ */
+static void __cpuinit ssmtc_boot_secondary(int cpu, struct task_struct *idle)
+{
+	smtc_boot_secondary(cpu, idle);
 }
 
-void plat_smp_setup(void)
+static void __init ssmtc_smp_setup(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
 	if (read_c0_config3() & (1 << 2))
 		mipsmt_build_cpu_map(0);
-#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
  * Platform SMP pre-initialization
  */
-
-void plat_prepare_cpus(unsigned int max_cpus)
+static void ssmtc_prepare_cpus(unsigned int max_cpus)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
 	/*
 	 * As noted above, we can assume a single CPU for now
 	 * but it may be multithreaded.
@@ -96,28 +103,15 @@ void plat_prepare_cpus(unsigned int max_cpus)
 	if (read_c0_config3() & (1 << 2)) {
 		mipsmt_prepare_cpus();
 	}
-#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
-/*
- * SMP initialization finalization entry point
- */
-
-void __cpuinit prom_smp_finish(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-	smtc_smp_finish();
-#endif /* CONFIG_MIPS_MT_SMTC */
-}
-
-/*
- * Hook for after all CPUs are online
- */
-
-void prom_cpus_done(void)
-{
-#ifdef CONFIG_MIPS_MT_SMTC
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-}
-#endif /* CONFIG_MIPS32R2_MT_SMP */
+struct plat_smp_ops ssmtc_smp_ops = {
+	.send_ipi_single	= ssmtc_send_ipi_single,
+	.send_ipi_mask		= ssmtc_send_ipi_mask,
+	.init_secondary		= ssmtc_init_secondary,
+	.smp_finish		= ssmtc_smp_finish,
+	.cpus_done		= ssmtc_cpus_done,
+	.boot_secondary		= ssmtc_boot_secondary,
+	.smp_setup		= ssmtc_smp_setup,
+	.prepare_cpus		= ssmtc_prepare_cpus,
+};

arch/mips/pmc-sierra/yosemite/prom.c

@@ -19,6 +19,7 @@
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/reboot.h>
+#include <asm/smp-ops.h>
 #include <asm/system.h>
 #include <asm/bootinfo.h>
 #include <asm/pmon.h>
@@ -78,6 +79,8 @@ static void prom_halt(void)
 		__asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0");
 }
 
+extern struct plat_smp_ops yos_smp_ops;
+
 /*
  * Init routine which accepts the variables from PMON
  */
@@ -127,6 +130,8 @@ void __init prom_init(void)
 	}
 
 	prom_grab_secondary();
+
+	register_smp_ops(&yos_smp_ops);
 }
 
 void __init prom_free_prom_memory(void)

arch/mips/pmc-sierra/yosemite/smp.c

@@ -42,70 +42,6 @@ void __init prom_grab_secondary(void)
 	              launchstack + LAUNCHSTACK_SIZE, 0);
 }
 
-/*
- * Detect available CPUs, populate phys_cpu_present_map before smp_init
- *
- * We don't want to start the secondary CPU yet nor do we have a nice probing
- * feature in PMON so we just assume presence of the secondary core.
- */
-void __init plat_smp_setup(void)
-{
-	int i;
-
-	cpus_clear(phys_cpu_present_map);
-
-	for (i = 0; i < 2; i++) {
-		cpu_set(i, phys_cpu_present_map);
-		__cpu_number_map[i]	= i;
-		__cpu_logical_map[i]	= i;
-	}
-}
-
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
-	/*
-	 * Be paranoid.  Enable the IPI only if we're really about to go SMP.
-	 */
-	if (cpus_weight(cpu_possible_map))
-		set_c0_status(STATUSF_IP5);
-}
-
-/*
- * Firmware CPU startup hook
- * Complicated by PMON's weird interface which tries to minimic the UNIX fork.
- * It launches the next * available CPU and copies some information on the
- * stack so the first thing we do is throw away that stuff and load useful
- * values into the registers ...
- */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
-{
-	unsigned long gp = (unsigned long) task_thread_info(idle);
-	unsigned long sp = __KSTK_TOS(idle);
-
-	secondary_sp = sp;
-	secondary_gp = gp;
-
-	spin_unlock(&launch_lock);
-}
-
-/* Hook for after all CPUs are online */
-void prom_cpus_done(void)
-{
-}
-
-/*
- *  After we've done initial boot, this function is called to allow the
- *  board code to clean up state, if needed
- */
-void __cpuinit prom_init_secondary(void)
-{
-	set_c0_status(ST0_CO | ST0_IE | ST0_IM);
-}
-
-void __cpuinit prom_smp_finish(void)
-{
-}
-
 void titan_mailbox_irq(void)
 {
 	int cpu = smp_processor_id();
@@ -133,7 +69,7 @@ void titan_mailbox_irq(void)
 /*
  * Send inter-processor interrupt
  */
-void core_send_ipi(int cpu, unsigned int action)
+static void yos_send_ipi_single(int cpu, unsigned int action)
 {
 	/*
 	 * Generate an INTMSG so that it can be sent over to the
@@ -159,3 +95,86 @@ void core_send_ipi(int cpu, unsigned int action)
 		break;
 	}
 }
+
+static void yos_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		yos_send_ipi_single(i, action);
+}
+
+/*
+ *  After we've done initial boot, this function is called to allow the
+ *  board code to clean up state, if needed
+ */
+static void __cpuinit yos_init_secondary(void)
+{
+	set_c0_status(ST0_CO | ST0_IE | ST0_IM);
+}
+
+static void __cpuinit yos_smp_finish(void)
+{
+}
+
+/* Hook for after all CPUs are online */
+static void yos_cpus_done(void)
+{
+}
+
+/*
+ * Firmware CPU startup hook
+ * Complicated by PMON's weird interface which tries to minimic the UNIX fork.
+ * It launches the next * available CPU and copies some information on the
+ * stack so the first thing we do is throw away that stuff and load useful
+ * values into the registers ...
+ */
+static void __cpuinit yos_boot_secondary(int cpu, struct task_struct *idle)
+{
+	unsigned long gp = (unsigned long) task_thread_info(idle);
+	unsigned long sp = __KSTK_TOS(idle);
+
+	secondary_sp = sp;
+	secondary_gp = gp;
+
+	spin_unlock(&launch_lock);
+}
+
+/*
+ * Detect available CPUs, populate phys_cpu_present_map before smp_init
+ *
+ * We don't want to start the secondary CPU yet nor do we have a nice probing
+ * feature in PMON so we just assume presence of the secondary core.
+ */
+static void __init yos_smp_setup(void)
+{
+	int i;
+
+	cpus_clear(phys_cpu_present_map);
+
+	for (i = 0; i < 2; i++) {
+		cpu_set(i, phys_cpu_present_map);
+		__cpu_number_map[i]	= i;
+		__cpu_logical_map[i]	= i;
+	}
+}
+
+static void __init yos_prepare_cpus(unsigned int max_cpus)
+{
+	/*
+	 * Be paranoid.  Enable the IPI only if we're really about to go SMP.
+	 */
+	if (cpus_weight(cpu_possible_map))
+		set_c0_status(STATUSF_IP5);
+}
+
+struct plat_smp_ops yos_smp_ops = {
+	.send_ipi_single	= yos_send_ipi_single,
+	.send_ipi_mask		= yos_send_ipi_mask,
+	.init_secondary		= yos_init_secondary,
+	.smp_finish		= yos_smp_finish,
+	.cpus_done		= yos_cpus_done,
+	.boot_secondary		= yos_boot_secondary,
+	.smp_setup		= yos_smp_setup,
+	.prepare_cpus		= yos_prepare_cpus,
+};

arch/mips/qemu/q-smp.c

@@ -3,7 +3,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2006 by Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006, 07 by Ralf Baechle (ralf@linux-mips.org)
  *
  * Symmetric Uniprocessor (TM) Support
  */
@@ -13,43 +13,55 @@
 /*
  * Send inter-processor interrupt
  */
-void core_send_ipi(int cpu, unsigned int action)
+void up_send_ipi_single(int cpu, unsigned int action)
 {
-	panic(KERN_ERR "%s called", __FUNCTION__);
+	panic(KERN_ERR "%s called", __func__);
+}
+
+static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	panic(KERN_ERR "%s called", __func__);
 }
 
 /*
  *  After we've done initial boot, this function is called to allow the
  *  board code to clean up state, if needed
  */
-void __cpuinit prom_init_secondary(void)
+void __cpuinit up_init_secondary(void)
 {
 }
 
-void __cpuinit prom_smp_finish(void)
+void __cpuinit up_smp_finish(void)
 {
 }
 
 /* Hook for after all CPUs are online */
-void prom_cpus_done(void)
-{
-}
-
-void __init prom_prepare_cpus(unsigned int max_cpus)
+void up_cpus_done(void)
 {
-	cpus_clear(phys_cpu_present_map);
 }
 
 /*
  * Firmware CPU startup hook
  */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+void __cpuinit up_boot_secondary(int cpu, struct task_struct *idle)
 {
 }
 
-void __init plat_smp_setup(void)
+void __init up_smp_setup(void)
 {
 }
-void __init plat_prepare_cpus(unsigned int max_cpus)
+
+void __init up_prepare_cpus(unsigned int max_cpus)
 {
 }
+
+struct plat_smp_ops up_smp_ops = {
+	.send_ipi_single	= up_send_ipi_single,
+	.send_ipi_mask		= up_send_ipi_mask,
+	.init_secondary		= up_init_secondary,
+	.smp_finish		= up_smp_finish,
+	.cpus_done		= up_cpus_done,
+	.boot_secondary		= up_boot_secondary,
+	.smp_setup		= up_smp_setup,
+	.prepare_cpus		= up_prepare_cpus,
+};

arch/mips/sgi-ip27/ip27-init.c

@@ -27,7 +27,6 @@
 #include <asm/sn/hub.h>
 #include <asm/sn/intr.h>
 #include <asm/current.h>
-#include <asm/smp.h>
 #include <asm/processor.h>
 #include <asm/mmu_context.h>
 #include <asm/thread_info.h>

arch/mips/sgi-ip27/ip27-klnuma.c

@@ -11,7 +11,6 @@
 
 #include <asm/page.h>
 #include <asm/sections.h>
-#include <asm/smp.h>
 #include <asm/sn/types.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/gda.h>

arch/mips/sgi-ip27/ip27-smp.c

@@ -140,30 +140,51 @@ static __init void intr_clear_all(nasid_t nasid)
 		REMOTE_HUB_CLR_INTR(nasid, i);
 }
 
-void __init plat_smp_setup(void)
+static void ip27_send_ipi_single(int destid, unsigned int action)
 {
-	cnodeid_t	cnode;
+	int irq;
 
-	for_each_online_node(cnode) {
-		if (cnode == 0)
-			continue;
-		intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
+	switch (action) {
+	case SMP_RESCHEDULE_YOURSELF:
+		irq = CPU_RESCHED_A_IRQ;
+		break;
+	case SMP_CALL_FUNCTION:
+		irq = CPU_CALL_A_IRQ;
+		break;
+	default:
+		panic("sendintr");
 	}
 
-	replicate_kernel_text();
+	irq += cputoslice(destid);
 
 	/*
-	 * Assumption to be fixed: we're always booted on logical / physical
-	 * processor 0.  While we're always running on logical processor 0
-	 * this still means this is physical processor zero; it might for
-	 * example be disabled in the firwware.
+	 * Convert the compact hub number to the NASID to get the correct
+	 * part of the address space.  Then set the interrupt bit associated
+	 * with the CPU we want to send the interrupt to.
 	 */
-	alloc_cpupda(0, 0);
+	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
 }
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
+static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		ip27_send_ipi_single(i, action);
+}
+
+static void __cpuinit ip27_init_secondary(void)
+{
+	per_cpu_init();
+	local_irq_enable();
+}
+
+static void __cpuinit ip27_smp_finish(void)
+{
+}
+
+static void __init ip27_cpus_done(void)
 {
-	/* We already did everything necessary earlier */
 }
 
 /*
@@ -171,7 +192,7 @@ void __init plat_prepare_cpus(unsigned int max_cpus)
  * set sp to the kernel stack of the newly created idle process, gp to the proc
  * struct so that current_thread_info() will work.
  */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
+static void __cpuinit ip27_boot_secondary(int cpu, struct task_struct *idle)
 {
 	unsigned long gp = (unsigned long)task_thread_info(idle);
 	unsigned long sp = __KSTK_TOS(idle);
@@ -181,41 +202,39 @@ void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
 		0, (void *) sp, (void *) gp);
 }
 
-void __cpuinit prom_init_secondary(void)
+static void __init ip27_smp_setup(void)
 {
-	per_cpu_init();
-	local_irq_enable();
-}
-
-void __init prom_cpus_done(void)
-{
-}
-
-void __cpuinit prom_smp_finish(void)
-{
-}
-
-void core_send_ipi(int destid, unsigned int action)
-{
-	int irq;
+	cnodeid_t	cnode;
 
-	switch (action) {
-	case SMP_RESCHEDULE_YOURSELF:
-		irq = CPU_RESCHED_A_IRQ;
-		break;
-	case SMP_CALL_FUNCTION:
-		irq = CPU_CALL_A_IRQ;
-		break;
-	default:
-		panic("sendintr");
+	for_each_online_node(cnode) {
+		if (cnode == 0)
+			continue;
+		intr_clear_all(COMPACT_TO_NASID_NODEID(cnode));
 	}
 
-	irq += cputoslice(destid);
+	replicate_kernel_text();
 
 	/*
-	 * Convert the compact hub number to the NASID to get the correct
-	 * part of the address space.  Then set the interrupt bit associated
-	 * with the CPU we want to send the interrupt to.
+	 * Assumption to be fixed: we're always booted on logical / physical
+	 * processor 0.  While we're always running on logical processor 0
+	 * this still means this is physical processor zero; it might for
+	 * example be disabled in the firwware.
 	 */
-	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
+	alloc_cpupda(0, 0);
 }
+
+static void __init ip27_prepare_cpus(unsigned int max_cpus)
+{
+	/* We already did everything necessary earlier */
+}
+
+struct plat_smp_ops ip27_smp_ops = {
+	.send_ipi_single	= ip27_send_ipi_single,
+	.send_ipi_mask		= ip27_send_ipi_mask,
+	.init_secondary		= ip27_init_secondary,
+	.smp_finish		= ip27_smp_finish,
+	.cpus_done		= ip27_cpus_done,
+	.boot_secondary		= ip27_boot_secondary,
+	.smp_setup		= ip27_smp_setup,
+	.prepare_cpus		= ip27_prepare_cpus,
+};

arch/mips/sibyte/bcm1480/smp.c

@@ -23,6 +23,7 @@
 
 #include <asm/mmu_context.h>
 #include <asm/io.h>
+#include <asm/fw/cfe/cfe_api.h>
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_int.h>
@@ -67,28 +68,114 @@ void __cpuinit bcm1480_smp_init(void)
 	change_c0_status(ST0_IM, imask);
 }
 
-void __cpuinit bcm1480_smp_finish(void)
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+static void bcm1480_send_ipi_single(int cpu, unsigned int action)
+{
+	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+}
+
+static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		bcm1480_send_ipi_single(i, action);
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit bcm1480_init_secondary(void)
+{
+	extern void bcm1480_smp_init(void);
+
+	bcm1480_smp_init();
+}
+
+/*
+ * Do any tidying up before marking online and running the idle
+ * loop
+ */
+static void __cpuinit bcm1480_smp_finish(void)
 {
 	extern void sb1480_clockevent_init(void);
 
 	sb1480_clockevent_init();
 	local_irq_enable();
+	bcm1480_smp_finish();
 }
 
 /*
- * These are routines for dealing with the sb1250 smp capabilities
- * independent of board/firmware
+ * Final cleanup after all secondaries booted
  */
+static void bcm1480_cpus_done(void)
+{
+}
 
 /*
- * Simple enough; everything is set up, so just poke the appropriate mailbox
- * register, and we should be set
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
  */
-void core_send_ipi(int cpu, unsigned int action)
+static void __cpuinit bcm1480_boot_secondary(int cpu, struct task_struct *idle)
 {
-	__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
+	int retval;
+
+	retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
+			       __KSTK_TOS(idle),
+			       (unsigned long)task_thread_info(idle), 0);
+	if (retval != 0)
+		printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
 }
 
+/*
+ * Use CFE to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ * XXXKW will the boot CPU ever not be physical 0?
+ *
+ * Common setup before any secondaries are started
+ */
+static void __init bcm1480_smp_setup(void)
+{
+	int i, num;
+
+	cpus_clear(phys_cpu_present_map);
+	cpu_set(0, phys_cpu_present_map);
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	for (i = 1, num = 0; i < NR_CPUS; i++) {
+		if (cfe_cpu_stop(i) == 0) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = ++num;
+			__cpu_logical_map[num] = i;
+		}
+	}
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+static void __init bcm1480_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops bcm1480_smp_ops = {
+	.send_ipi_single	= bcm1480_send_ipi_single,
+	.send_ipi_mask		= bcm1480_send_ipi_mask,
+	.init_secondary		= bcm1480_init_secondary,
+	.smp_finish		= bcm1480_smp_finish,
+	.cpus_done		= bcm1480_cpus_done,
+	.boot_secondary		= bcm1480_boot_secondary,
+	.smp_setup		= bcm1480_smp_setup,
+	.prepare_cpus		= bcm1480_prepare_cpus,
+};
+
 void bcm1480_mailbox_interrupt(void)
 {
 	int cpu = smp_processor_id();

arch/mips/sibyte/cfe/Makefile

 lib-y					= setup.o
-lib-$(CONFIG_SMP)			+= smp.o
 lib-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= console.o

arch/mips/sibyte/cfe/setup.c

@@ -28,6 +28,7 @@
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
 #include <asm/sibyte/board.h>
+#include <asm/smp-ops.h>
 
 #include <asm/fw/cfe/cfe_api.h>
 #include <asm/fw/cfe/cfe_error.h>
@@ -232,6 +233,9 @@ static int __init initrd_setup(char *str)
 
 #endif
 
+extern struct plat_smp_ops sb_smp_ops;
+extern struct plat_smp_ops bcm1480_smp_ops;
+
 /*
  * prom_init is called just after the cpu type is determined, from setup_arch()
  */
@@ -340,6 +344,13 @@ void __init prom_init(void)
 	arcs_cmdline[CL_SIZE-1] = 0;
 
 	prom_meminit();
+
+#if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250)
+	register_smp_ops(&sb_smp_ops);
+#endif
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+	register_smp_ops(&bcm1480_smp_ops);
+#endif
 }
 
 void __init prom_free_prom_memory(void)

arch/mips/sibyte/cfe/smp.c

-/*
- * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <asm/processor.h>
-
-#include <asm/fw/cfe/cfe_api.h>
-#include <asm/fw/cfe/cfe_error.h>
-
-/*
- * Use CFE to find out how many CPUs are available, setting up
- * phys_cpu_present_map and the logical/physical mappings.
- * XXXKW will the boot CPU ever not be physical 0?
- *
- * Common setup before any secondaries are started
- */
-void __init plat_smp_setup(void)
-{
-	int i, num;
-
-	cpus_clear(phys_cpu_present_map);
-	cpu_set(0, phys_cpu_present_map);
-	__cpu_number_map[0] = 0;
-	__cpu_logical_map[0] = 0;
-
-	for (i = 1, num = 0; i < NR_CPUS; i++) {
-		if (cfe_cpu_stop(i) == 0) {
-			cpu_set(i, phys_cpu_present_map);
-			__cpu_number_map[i] = ++num;
-			__cpu_logical_map[num] = i;
-		}
-	}
-	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
-}
-
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it
- * running!
- */
-void __cpuinit prom_boot_secondary(int cpu, struct task_struct *idle)
-{
-	int retval;
-
-	retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
-			       __KSTK_TOS(idle),
-			       (unsigned long)task_thread_info(idle), 0);
-	if (retval != 0)
-		printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
-}
-
-/*
- * Code to run on secondary just after probing the CPU
- */
-void __cpuinit prom_init_secondary(void)
-{
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	extern void bcm1480_smp_init(void);
-	bcm1480_smp_init();
-#elif defined(CONFIG_SIBYTE_SB1250)
-	extern void sb1250_smp_init(void);
-	sb1250_smp_init();
-#else
-#error invalid SMP configuration
-#endif
-}
-
-/*
- * Do any tidying up before marking online and running the idle
- * loop
- */
-void __cpuinit prom_smp_finish(void)
-{
-#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
-	extern void bcm1480_smp_finish(void);
-	bcm1480_smp_finish();
-#elif defined(CONFIG_SIBYTE_SB1250)
-	extern void sb1250_smp_finish(void);
-	sb1250_smp_finish();
-#else
-#error invalid SMP configuration
-#endif
-}
-
-/*
- * Final cleanup after all secondaries booted
- */
-void prom_cpus_done(void)
-{
-}

arch/mips/sibyte/sb1250/smp.c

@@ -24,6 +24,7 @@
 
 #include <asm/mmu_context.h>
 #include <asm/io.h>
+#include <asm/fw/cfe/cfe_api.h>
 #include <asm/sibyte/sb1250.h>
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_int.h>
@@ -55,7 +56,43 @@ void __cpuinit sb1250_smp_init(void)
 	change_c0_status(ST0_IM, imask);
 }
 
-void __cpuinit sb1250_smp_finish(void)
+/*
+ * These are routines for dealing with the sb1250 smp capabilities
+ * independent of board/firmware
+ */
+
+/*
+ * Simple enough; everything is set up, so just poke the appropriate mailbox
+ * register, and we should be set
+ */
+static void sb1250_send_ipi_single(int cpu, unsigned int action)
+{
+	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+}
+
+static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		sb1250_send_ipi_single(i, action);
+}
+
+/*
+ * Code to run on secondary just after probing the CPU
+ */
+static void __cpuinit sb1250_init_secondary(void)
+{
+	extern void sb1250_smp_init(void);
+
+	sb1250_smp_init();
+}
+
+/*
+ * Do any tidying up before marking online and running the idle
+ * loop
+ */
+static void __cpuinit sb1250_smp_finish(void)
 {
 	extern void sb1250_clockevent_init(void);
 
@@ -64,19 +101,68 @@ void __cpuinit sb1250_smp_finish(void)
 }
 
 /*
- * These are routines for dealing with the sb1250 smp capabilities
- * independent of board/firmware
+ * Final cleanup after all secondaries booted
  */
+static void sb1250_cpus_done(void)
+{
+}
 
 /*
- * Simple enough; everything is set up, so just poke the appropriate mailbox
- * register, and we should be set
+ * Setup the PC, SP, and GP of a secondary processor and start it
+ * running!
  */
-void core_send_ipi(int cpu, unsigned int action)
+static void __cpuinit sb1250_boot_secondary(int cpu, struct task_struct *idle)
 {
-	__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
+	int retval;
+
+	retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
+			       __KSTK_TOS(idle),
+			       (unsigned long)task_thread_info(idle), 0);
+	if (retval != 0)
+		printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
 }
 
+/*
+ * Use CFE to find out how many CPUs are available, setting up
+ * phys_cpu_present_map and the logical/physical mappings.
+ * XXXKW will the boot CPU ever not be physical 0?
+ *
+ * Common setup before any secondaries are started
+ */
+static void __init sb1250_smp_setup(void)
+{
+	int i, num;
+
+	cpus_clear(phys_cpu_present_map);
+	cpu_set(0, phys_cpu_present_map);
+	__cpu_number_map[0] = 0;
+	__cpu_logical_map[0] = 0;
+
+	for (i = 1, num = 0; i < NR_CPUS; i++) {
+		if (cfe_cpu_stop(i) == 0) {
+			cpu_set(i, phys_cpu_present_map);
+			__cpu_number_map[i] = ++num;
+			__cpu_logical_map[num] = i;
+		}
+	}
+	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
+
+static void __init sb1250_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct plat_smp_ops sb_smp_ops = {
+	.send_ipi_single	= sb1250_send_ipi_single,
+	.send_ipi_mask		= sb1250_send_ipi_mask,
+	.init_secondary		= sb1250_init_secondary,
+	.smp_finish		= sb1250_smp_finish,
+	.cpus_done		= sb1250_cpus_done,
+	.boot_secondary		= sb1250_boot_secondary,
+	.smp_setup		= sb1250_smp_setup,
+	.prepare_cpus		= sb1250_prepare_cpus,
+};
+
 void sb1250_mailbox_interrupt(void)
 {
 	int cpu = smp_processor_id();

include/asm-mips/sibyte/sb1250.h

@@ -48,12 +48,10 @@ extern unsigned int zbbus_mhz;
 extern void sb1250_time_init(void);
 extern void sb1250_mask_irq(int cpu, int irq);
 extern void sb1250_unmask_irq(int cpu, int irq);
-extern void sb1250_smp_finish(void);
 
 extern void bcm1480_time_init(void);
 extern void bcm1480_mask_irq(int cpu, int irq);
 extern void bcm1480_unmask_irq(int cpu, int irq);
-extern void bcm1480_smp_finish(void);
 
 #define AT_spin \
 	__asm__ __volatile__ (		\

include/asm-mips/smp-ops.h

+/*
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * Copyright (C) 2000 - 2001 by Kanoj Sarcar (kanoj@sgi.com)
+ * Copyright (C) 2000 - 2001 by Silicon Graphics, Inc.
+ * Copyright (C) 2000, 2001, 2002 Ralf Baechle
+ * Copyright (C) 2000, 2001 Broadcom Corporation
+ */
+#ifndef __ASM_SMP_OPS_H
+#define __ASM_SMP_OPS_H
+
+#ifdef CONFIG_SMP
+
+#include <linux/cpumask.h>
+
+struct plat_smp_ops {
+	void (*send_ipi_single)(int cpu, unsigned int action);
+	void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+	void (*init_secondary)(void);
+	void (*smp_finish)(void);
+	void (*cpus_done)(void);
+	void (*boot_secondary)(int cpu, struct task_struct *idle);
+	void (*smp_setup)(void);
+	void (*prepare_cpus)(unsigned int max_cpus);
+};
+
+extern void register_smp_ops(struct plat_smp_ops *ops);
+
+static inline void plat_smp_setup(void)
+{
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	mp_ops->smp_setup();
+}
+
+#else /* !CONFIG_SMP */
+
+struct plat_smp_ops;
+
+static inline void plat_smp_setup(void)
+{
+	/* UP, nothing to do ...  */
+}
+
+static inline void register_smp_ops(struct plat_smp_ops *ops)
+{
+}
+
+#endif /* !CONFIG_SMP */
+
+extern struct plat_smp_ops up_smp_ops;
+extern struct plat_smp_ops vsmp_smp_ops;
+
+#endif /* __ASM_SMP_OPS_H */

include/asm-mips/smp.h

@@ -11,14 +11,13 @@
 #ifndef __ASM_SMP_H
 #define __ASM_SMP_H
 
-
-#ifdef CONFIG_SMP
-
 #include <linux/bitops.h>
 #include <linux/linkage.h>
 #include <linux/threads.h>
 #include <linux/cpumask.h>
+
 #include <asm/atomic.h>
+#include <asm/smp-ops.h>
 
 extern int smp_num_siblings;
 extern cpumask_t cpu_sibling_map[];
@@ -52,56 +51,6 @@ extern struct call_data_struct *call_data;
 extern cpumask_t phys_cpu_present_map;
 #define cpu_possible_map	phys_cpu_present_map
 
-/*
- * These are defined by the board-specific code.
- */
-
-/*
- * Cause the function described by call_data to be executed on the passed
- * cpu.  When the function has finished, increment the finished field of
- * call_data.
- */
-extern void core_send_ipi(int cpu, unsigned int action);
-
-static inline void core_send_ipi_mask(cpumask_t mask, unsigned int action)
-{
-	unsigned int i;
-
-	for_each_cpu_mask(i, mask)
-		core_send_ipi(i, action);
-}
-
-
-/*
- * Firmware CPU startup hook
- */
-extern void prom_boot_secondary(int cpu, struct task_struct *idle);
-
-/*
- *  After we've done initial boot, this function is called to allow the
- *  board code to clean up state, if needed
- */
-extern void prom_init_secondary(void);
-
-/*
- * Populate cpu_possible_map before smp_init, called from setup_arch.
- */
-extern void plat_smp_setup(void);
-
-/*
- * Called in smp_prepare_cpus.
- */
-extern void plat_prepare_cpus(unsigned int max_cpus);
-
-/*
- * Last chance for the board code to finish SMP initialization before
- * the CPU is "online".
- */
-extern void prom_smp_finish(void);
-
-/* Hook for after all CPUs are online */
-extern void prom_cpus_done(void);
-
 extern void asmlinkage smp_bootstrap(void);
 
 /*
@@ -111,11 +60,11 @@ extern void asmlinkage smp_bootstrap(void);
  */
 static inline void smp_send_reschedule(int cpu)
 {
-	core_send_ipi(cpu, SMP_RESCHEDULE_YOURSELF);
+	extern struct plat_smp_ops *mp_ops;	/* private */
+
+	mp_ops->send_ipi_single(cpu, SMP_RESCHEDULE_YOURSELF);
 }
 
 extern asmlinkage void smp_call_function_interrupt(void);
 
-#endif /* CONFIG_SMP */
-
 #endif /* __ASM_SMP_H */