drivers/net: Kconfig & Makefile cleanup

The is does a general cleanup of the drivers/net/ Kconfig and
Makefile.  This patch create a "core" option and places all
the networking core drivers into this option (default is yes
for this option).  In addition, it alphabitizes the Kconfig
driver options.

As a side cleanup, found that the arcnet, token ring, and PHY
Kconfig options were a tri-state option and should have been
a bool option.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/Makefile

@@ -2,40 +2,38 @@
 # Makefile for the Linux network device drivers.
 #
 
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-obj-$(CONFIG_CAN) += can/
-obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_VMXNET3) += vmxnet3/
-
 #
-# link order important here
+# Networking Core Drivers
 #
-obj-$(CONFIG_RIONET) += rionet.o
-
-#
-# end link order section
-#
-
-obj-$(CONFIG_NET) += Space.o loopback.o
-obj-$(CONFIG_NET_SB1000) += sb1000.o
-
-obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
-obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
-
+obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_DUMMY) += dummy.o
+obj-$(CONFIG_EQUALIZER) += eql.o
 obj-$(CONFIG_IFB) += ifb.o
 obj-$(CONFIG_MACVLAN) += macvlan.o
 obj-$(CONFIG_MACVTAP) += macvtap.o
-obj-$(CONFIG_EQUALIZER) += eql.o
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_NET) += Space.o loopback.o
+obj-$(CONFIG_NETCONSOLE) += netconsole.o
+obj-$(CONFIG_PHYLIB) += phy/
+obj-$(CONFIG_RIONET) += rionet.o
 obj-$(CONFIG_TUN) += tun.o
 obj-$(CONFIG_VETH) += veth.o
+obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
 
+#
+# Networking Drivers
+#
+obj-$(CONFIG_ARCNET) += arcnet/
 obj-$(CONFIG_DEV_APPLETALK) += appletalk/
+obj-$(CONFIG_CAIF) += caif/
+obj-$(CONFIG_CAN) += can/
+obj-$(CONFIG_ETRAX_ETHERNET) += cris/
 obj-$(CONFIG_ETHERNET) += ethernet/
 obj-$(CONFIG_FDDI) += fddi/
 obj-$(CONFIG_HIPPI) += hippi/
+obj-$(CONFIG_HAMRADIO) += hamradio/
+obj-$(CONFIG_IRDA) += irda/
 obj-$(CONFIG_PLIP) += plip/
 onj-$(CONFIG_PPP) += ppp/
 obj-$(CONFIG_PPP_ASYNC) += ppp/
@@ -48,9 +46,17 @@ obj-$(CONFIG_PPPOL2TP) += ppp/
 obj-$(CONFIG_PPTP) += ppp/
 onj-$(CONFIG_SLIP) += slip/
 obj-$(CONFIG_SLHC) += slip/
+obj-$(CONFIG_NET_SB1000) += sb1000.o
+onj-$(CONFIG_SLIP) += slip/
+obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o
 obj-$(CONFIG_TR) += tokenring/
 obj-$(CONFIG_WAN) += wan/
-obj-$(CONFIG_ARCNET) += arcnet/
+obj-$(CONFIG_WLAN) += wireless/
+obj-$(CONFIG_WIMAX) += wimax/
+
+obj-$(CONFIG_VMXNET3) += vmxnet3/
+obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
 
 obj-$(CONFIG_USB_CATC)          += usb/
 obj-$(CONFIG_USB_KAWETH)        += usb/
@@ -61,17 +67,3 @@ obj-$(CONFIG_USB_USBNET)        += usb/
 obj-$(CONFIG_USB_ZD1201)        += usb/
 obj-$(CONFIG_USB_IPHETH)        += usb/
 obj-$(CONFIG_USB_CDC_PHONET)   += usb/
-
-obj-$(CONFIG_WLAN) += wireless/
-obj-$(CONFIG_HAMRADIO) += hamradio/
-obj-$(CONFIG_IRDA) += irda/
-obj-$(CONFIG_ETRAX_ETHERNET) += cris/
-
-obj-$(CONFIG_NETCONSOLE) += netconsole.o
-
-obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
-
-obj-$(CONFIG_WIMAX) += wimax/
-obj-$(CONFIG_CAIF) += caif/
-
-obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o

drivers/net/arcnet/Kconfig

@@ -4,7 +4,7 @@
 
 menuconfig ARCNET
 	depends on NETDEVICES && (ISA || PCI || PCMCIA)
-	tristate "ARCnet support"
+	bool "ARCnet support"
 	---help---
 	  If you have a network card of this type, say Y and check out the
 	  (arguably) beautiful poetry in

drivers/net/phy/Kconfig

@@ -3,7 +3,7 @@
 #
 
 menuconfig PHYLIB
-	tristate "PHY Device support and infrastructure"
+	bool "PHY Device support and infrastructure"
 	depends on !S390
 	depends on NETDEVICES
 	help

drivers/net/tokenring/Kconfig

@@ -4,7 +4,7 @@
 
 # So far, we only have PCI, ISA, and MCA token ring devices
 menuconfig TR
-	tristate "Token Ring driver support"
+	bool "Token Ring driver support"
 	depends on NETDEVICES && !UML
 	depends on (PCI || ISA || MCA || CCW || PCMCIA)
 	select LLC