net: smc91x: ACPI Enable lan91x adapters

Enable lan91x adapters in some ARM machines and models
when booted with an ACPI kernel.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/smsc/smc91x.c

@@ -2195,6 +2195,12 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device *
 	}
 }
 
+static const struct acpi_device_id smc91x_acpi_match[] = {
+	{ "LNRO0003", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, smc91x_acpi_match);
+
 #if IS_BUILTIN(CONFIG_OF)
 static const struct of_device_id smc91x_match[] = {
 	{ .compatible = "smsc,lan91c94", },
@@ -2274,7 +2280,6 @@ static int smc_drv_probe(struct platform_device *pdev)
 #if IS_BUILTIN(CONFIG_OF)
 	match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev);
 	if (match) {
-		struct device_node *np = pdev->dev.of_node;
 		u32 val;
 
 		/* Optional pwrdwn GPIO configured? */
@@ -2300,7 +2305,8 @@ static int smc_drv_probe(struct platform_device *pdev)
 			usleep_range(750, 1000);
 
 		/* Combination of IO widths supported, default to 16-bit */
-		if (!of_property_read_u32(np, "reg-io-width", &val)) {
+		if (!device_property_read_u32(&pdev->dev, "reg-io-width",
+					      &val)) {
 			if (val & 1)
 				lp->cfg.flags |= SMC91X_USE_8BIT;
 			if ((val == 0) || (val & 2))
@@ -2479,6 +2485,7 @@ static struct platform_driver smc_driver = {
 		.name	= CARDNAME,
 		.pm	= &smc_drv_pm_ops,
 		.of_match_table   = of_match_ptr(smc91x_match),
+		.acpi_match_table = smc91x_acpi_match,
 	},
 };