OMAP: add TI OMAP framebuffer driver

- Add Texas Instruments OMAP framebuffer driver.  This driver is being used
  for various OMAP1/2 series based boards and products e.g Nokia N800 Internet
  Tablet, H4, H3, Siemens SX1 etc.

- LCD panel registration and controller code is separated in different file
  and interfaces.
Signed-off-by: Trilok Soni <soni.trilok@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/Kconfig

@@ -1820,6 +1820,10 @@ config FB_XILINX
 	  framebuffer. ML300 carries a 640*480 LCD display on the board,
 	  ML403 uses a standard DB15 VGA connector.
 
+if ARCH_OMAP
+	source "drivers/video/omap/Kconfig"
+endif
+
 config FB_VIRTUAL
 	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
 	depends on FB

drivers/video/Makefile

@@ -113,6 +113,7 @@ obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_FB_OMAP)             += omap/
 
 # Platform or fallback drivers go here
 obj-$(CONFIG_FB_VESA)             += vesafb.o

drivers/video/omap/Kconfig

+config FB_OMAP
+	tristate "OMAP frame buffer support (EXPERIMENTAL)"
+	depends on FB
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+          Frame buffer driver for OMAP based boards.
+
+config FB_OMAP_BOOTLOADER_INIT
+	bool "Check bootloader initializaion"
+	depends on FB_OMAP
+	help
+	  Say Y here if you want to enable checking if the bootloader has
+	  already initialized the display controller. In this case the
+	  driver will skip the initialization.
+
+config FB_OMAP_CONSISTENT_DMA_SIZE
+	int "Consistent DMA memory size (MB)"
+	depends on FB_OMAP
+	range 1 14
+	default 2
+	help
+	  Increase the DMA consistent memory size according to your video
+	  memory needs, for example if you want to use multiple planes.
+	  The size must be 2MB aligned.
+	  If unsure say 1.
+
+config FB_OMAP_DMA_TUNE
+        bool "Set DMA SDRAM access priority high"
+        depends on FB_OMAP && ARCH_OMAP1
+        help
+          On systems in which video memory is in system memory
+          (SDRAM) this will speed up graphics DMA operations.
+          If you have such a system and want to use rotation
+          answer yes. Answer no if you have a dedicated video
+          memory, or don't use any of the accelerated features.
+

drivers/video/omap/Makefile

+#
+# Makefile for the new OMAP framebuffer device driver
+#
+
+obj-$(CONFIG_FB_OMAP) += omapfb.o
+
+objs-yy := omapfb_main.o
+
+omapfb-objs := $(objs-yy)
+