V4L/DVB (11066): au0828: add support for analog functionality in bridge

Add support for the analog functionality found in the au0828 bridge

Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth
<stoth@linuxtv.org> for providing sample hardware, engineering level support,
and testing.
Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
[mchehab@redhat.com: fix compilation by adding linux/version.h]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/au0828/Makefile

-au0828-objs	:= au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o
+au0828-objs	:= au0828-core.o au0828-i2c.o au0828-cards.o au0828-dvb.o au0828-video.o
 
 obj-$(CONFIG_VIDEO_AU0828) += au0828.o
 

drivers/media/video/au0828/au0828-cards.c

@@ -21,6 +21,18 @@
 
 #include "au0828.h"
 #include "au0828-cards.h"
+#include "au8522.h"
+
+void hvr950q_cs5340_audio(void *priv, int enable)
+{
+	/* Because the HVR-950q shares an i2s bus between the cs5340 and the
+	   au8522, we need to hold cs5340 in reset when using the au8522 */
+	struct au0828_dev *dev = priv;
+	if (enable == 1)
+		au0828_set(dev, REG_000, 0x10);
+	else
+		au0828_clear(dev, REG_000, 0x10);
+}
 
 struct au0828_board au0828_boards[] = {
 	[AU0828_BOARD_UNKNOWN] = {
@@ -31,6 +43,25 @@ struct au0828_board au0828_boards[] = {
 	},
 	[AU0828_BOARD_HAUPPAUGE_HVR950Q] = {
 		.name	= "Hauppauge HVR950Q",
+		.input = {
+			{
+				.type = AU0828_VMUX_TELEVISION,
+				.vmux = AU8522_COMPOSITE_CH4_SIF,
+				.amux = AU8522_AUDIO_SIF,
+			},
+			{
+				.type = AU0828_VMUX_COMPOSITE,
+				.vmux = AU8522_COMPOSITE_CH1,
+				.amux = AU8522_AUDIO_NONE,
+				.audio_setup = hvr950q_cs5340_audio,
+			},
+			{
+				.type = AU0828_VMUX_SVIDEO,
+				.vmux = AU8522_SVIDEO_CH13,
+				.amux = AU8522_AUDIO_NONE,
+				.audio_setup = hvr950q_cs5340_audio,
+			},
+		},
 	},
 	[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
 		.name	= "Hauppauge HVR950Q rev xxF8",
@@ -144,21 +175,23 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 		 * 4 - CS5340
 		 * 5 - AU8522 Demodulator
 		 * 6 - eeprom W/P
+		 * 7 - power supply
 		 * 9 - XC5000 Tuner
 		 */
 
 		/* Into reset */
 		au0828_write(dev, REG_003, 0x02);
-		au0828_write(dev, REG_002, 0x88 | 0x20);
+		au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
 		au0828_write(dev, REG_001, 0x0);
 		au0828_write(dev, REG_000, 0x0);
 		msleep(100);
 
-		/* Out of reset */
+		/* Out of reset (leave the cs5340 in reset until needed) */
 		au0828_write(dev, REG_003, 0x02);
 		au0828_write(dev, REG_001, 0x02);
-		au0828_write(dev, REG_002, 0x88 | 0x20);
-		au0828_write(dev, REG_000, 0x88 | 0x20 | 0x40);
+		au0828_write(dev, REG_002, 0x80 | 0x20 | 0x10);
+		au0828_write(dev, REG_000, 0x80 | 0x40 | 0x20);
+
 		msleep(250);
 		break;
 	case AU0828_BOARD_DVICO_FUSIONHDTV7:

drivers/media/video/au0828/au0828-core.c

@@ -146,6 +146,8 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
 	/* Digital TV */
 	au0828_dvb_unregister(dev);
 
+	au0828_analog_unregister(dev);
+
 	/* I2C */
 	au0828_i2c_unregister(dev);
 
@@ -162,9 +164,11 @@ static void au0828_usb_disconnect(struct usb_interface *interface)
 static int au0828_usb_probe(struct usb_interface *interface,
 	const struct usb_device_id *id)
 {
-	int ifnum;
+	int ifnum, i;
 	struct au0828_dev *dev;
 	struct usb_device *usbdev = interface_to_usbdev(interface);
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
 
 	ifnum = interface->altsetting->desc.bInterfaceNumber;
 
@@ -189,6 +193,30 @@ static int au0828_usb_probe(struct usb_interface *interface,
 
 	usb_set_intfdata(interface, dev);
 
+	/* set au0828 usb interface0 to as5 */
+	usb_set_interface(usbdev,
+			  interface->cur_altsetting->desc.bInterfaceNumber, 5);
+
+	/* Figure out which endpoint has the isoc interface */
+	iface_desc = interface->cur_altsetting;
+	for(i = 0; i < iface_desc->desc.bNumEndpoints; i++){
+		endpoint = &iface_desc->endpoint[i].desc;
+		if(((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)	&&
+		   ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_ISOC)){
+
+			/* we find our isoc in endpoint */
+			u16 tmp = le16_to_cpu(endpoint->wMaxPacketSize);
+			dev->max_pkt_size = (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
+			dev->isoc_in_endpointaddr = endpoint->bEndpointAddress;
+		}
+	}
+	if(!(dev->isoc_in_endpointaddr)) {
+		printk("Could not locate isoc endpoint\n");
+		kfree(dev);
+		return -ENODEV;
+	}
+
+
 	/* Power Up the bridge */
 	au0828_write(dev, REG_600, 1 << 4);
 
@@ -201,6 +229,9 @@ static int au0828_usb_probe(struct usb_interface *interface,
 	/* Setup */
 	au0828_card_setup(dev);
 
+	/* Analog TV */
+	au0828_analog_register(dev);
+
 	/* Digital TV */
 	au0828_dvb_register(dev);
 

drivers/media/video/au0828/au0828-reg.h

@@ -27,6 +27,9 @@
 #define REG_002 0x002
 #define REG_003 0x003
 
+#define AU0828_SENSORCTRL_100 0x100
+#define AU0828_SENSORCTRL_VBI_103 0x103
+
 #define REG_200 0x200
 #define REG_201 0x201
 #define REG_202 0x202
@@ -35,4 +38,7 @@
 #define REG_209 0x209
 #define REG_2FF 0x2ff
 
+/* Audio registers */
+#define AU0828_AUDIOCTRL_50C 0x50C
+
 #define REG_600 0x600

drivers/media/video/au0828/au0828-video.c

+/*
+ * Auvitek AU0828 USB Bridge (Analog video support)
+ *
+ * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org>
+ * Copyright (C) 2005-2008 Auvitek International, Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * As published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+/* Developer Notes:
+ *
+ * VBI support is not yet working
+ * The hardware scaler supported is unimplemented
+ * AC97 audio support is unimplemented (only i2s audio mode)
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/suspend.h>
+#include <linux/version.h>
+#include <linux/videodev.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/tuner.h>
+#include "au0828.h"
+#include "au0828-reg.h"
+
+static LIST_HEAD(au0828_devlist);
+static DEFINE_MUTEX(au0828_sysfs_lock);
+
+#define AU0828_VERSION_CODE KERNEL_VERSION(0, 0, 1)
+
+/* Forward declarations */
+void au0828_analog_stream_reset(struct au0828_dev *dev);
+
+/* ------------------------------------------------------------------
+	Videobuf operations
+   ------------------------------------------------------------------*/
+
+static unsigned int isoc_debug;
+module_param(isoc_debug, int, 0644);
+MODULE_PARM_DESC(isoc_debug, "enable debug messages [isoc transfers]");
+
+#define au0828_isocdbg(fmt, arg...) \
+do {\
+	if (isoc_debug) { \
+		printk(KERN_INFO "au0828 %s :"fmt, \
+		       __func__ , ##arg);	   \
+	} \
+  } while (0)
+
+static inline void print_err_status(struct au0828_dev *dev,
+				    int packet, int status)
+{
+	char *errmsg = "Unknown";
+
+	switch (status) {
+	case -ENOENT:
+		errmsg = "unlinked synchronuously";
+		break;
+	case -ECONNRESET:
+		errmsg = "unlinked asynchronuously";
+		break;
+	case -ENOSR:
+		errmsg = "Buffer error (overrun)";
+		break;
+	case -EPIPE:
+		errmsg = "Stalled (device not responding)";
+		break;
+	case -EOVERFLOW:
+		errmsg = "Babble (bad cable?)";
+		break;
+	case -EPROTO:
+		errmsg = "Bit-stuff error (bad cable?)";
+		break;
+	case -EILSEQ:
+		errmsg = "CRC/Timeout (could be anything)";
+		break;
+	case -ETIME:
+		errmsg = "Device does not respond";
+		break;
+	}
+	if (packet < 0) {
+		au0828_isocdbg("URB status %d [%s].\n",	status, errmsg);
+	} else {
+		au0828_isocdbg("URB packet %d, status %d [%s].\n",
+			       packet, status, errmsg);
+	}
+}
+
+static int check_dev(struct au0828_dev *dev)
+{
+	if (dev->dev_state & DEV_DISCONNECTED) {
+		printk("v4l2 ioctl: device not present\n");
+		return -ENODEV;
+	}
+
+	if (dev->dev_state & DEV_MISCONFIGURED) {
+		printk("v4l2 ioctl: device is misconfigured; "
+		       "close and open it again\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+/*
+ * IRQ callback, called by URB callback
+ */
+static void au0828_irq_callback(struct urb *urb)
+{
+	struct au0828_dmaqueue  *dma_q = urb->context;
+	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
+	int rc, i;
+
+	switch (urb->status) {
+	case 0:             /* success */
+	case -ETIMEDOUT:    /* NAK */
+		break;
+	case -ECONNRESET:   /* kill */
+	case -ENOENT:
+	case -ESHUTDOWN:
+		au0828_isocdbg("au0828_irq_callback called: status kill\n");
+		return;
+	default:            /* unknown error */
+		au0828_isocdbg("urb completition error %d.\n", urb->status);
+		break;
+	}
+
+	/* Copy data from URB */
+	spin_lock(&dev->slock);
+	rc = dev->isoc_ctl.isoc_copy(dev, urb);
+	spin_unlock(&dev->slock);
+
+	/* Reset urb buffers */
+	for (i = 0; i < urb->number_of_packets; i++) {
+		urb->iso_frame_desc[i].status = 0;
+		urb->iso_frame_desc[i].actual_length = 0;
+	}
+	urb->status = 0;
+
+	urb->status = usb_submit_urb(urb, GFP_ATOMIC);
+	if (urb->status) {
+		au0828_isocdbg("urb resubmit failed (error=%i)\n",
+			       urb->status);
+	}
+}
+
+/*
+ * Stop and Deallocate URBs
+ */
+void au0828_uninit_isoc(struct au0828_dev *dev)
+{
+	struct urb *urb;
+	int i;
+
+	au0828_isocdbg("au0828: called au0828_uninit_isoc\n");
+
+	dev->isoc_ctl.nfields = -1;
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		urb = dev->isoc_ctl.urb[i];
+		if (urb) {
+			if (!irqs_disabled())
+				usb_kill_urb(urb);
+			else
+				usb_unlink_urb(urb);
+
+			if (dev->isoc_ctl.transfer_buffer[i]) {
+				usb_buffer_free(dev->usbdev,
+					urb->transfer_buffer_length,
+					dev->isoc_ctl.transfer_buffer[i],
+					urb->transfer_dma);
+			}
+			usb_free_urb(urb);
+			dev->isoc_ctl.urb[i] = NULL;
+		}
+		dev->isoc_ctl.transfer_buffer[i] = NULL;
+	}
+
+	kfree(dev->isoc_ctl.urb);
+	kfree(dev->isoc_ctl.transfer_buffer);
+
+	dev->isoc_ctl.urb = NULL;
+	dev->isoc_ctl.transfer_buffer = NULL;
+	dev->isoc_ctl.num_bufs = 0;
+}
+
+/*
+ * Allocate URBs and start IRQ
+ */
+int au0828_init_isoc(struct au0828_dev *dev, int max_packets,
+		     int num_bufs, int max_pkt_size,
+		     int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb))
+{
+	struct au0828_dmaqueue *dma_q = &dev->vidq;
+	int i;
+	int sb_size, pipe;
+	struct urb *urb;
+	int j, k;
+	int rc;
+
+	au0828_isocdbg("au0828: called au0828_prepare_isoc\n");
+
+	/* De-allocates all pending stuff */
+	au0828_uninit_isoc(dev);
+
+	dev->isoc_ctl.isoc_copy = isoc_copy;
+	dev->isoc_ctl.num_bufs = num_bufs;
+
+	dev->isoc_ctl.urb = kzalloc(sizeof(void *)*num_bufs,  GFP_KERNEL);
+	if (!dev->isoc_ctl.urb) {
+		au0828_isocdbg("cannot alloc memory for usb buffers\n");
+		return -ENOMEM;
+	}
+
+	dev->isoc_ctl.transfer_buffer = kzalloc(sizeof(void *)*num_bufs,
+					      GFP_KERNEL);
+	if (!dev->isoc_ctl.transfer_buffer) {
+		au0828_isocdbg("cannot allocate memory for usb transfer\n");
+		kfree(dev->isoc_ctl.urb);
+		return -ENOMEM;
+	}
+
+	dev->isoc_ctl.max_pkt_size = max_pkt_size;
+	dev->isoc_ctl.buf = NULL;
+
+	sb_size = max_packets * dev->isoc_ctl.max_pkt_size;
+
+	/* allocate urbs and transfer buffers */
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		urb = usb_alloc_urb(max_packets, GFP_KERNEL);
+		if (!urb) {
+			au0828_isocdbg("cannot alloc isoc_ctl.urb %i\n", i);
+			au0828_uninit_isoc(dev);
+			return -ENOMEM;
+		}
+		dev->isoc_ctl.urb[i] = urb;
+
+		dev->isoc_ctl.transfer_buffer[i] = usb_buffer_alloc(dev->usbdev,
+			sb_size, GFP_KERNEL, &urb->transfer_dma);
+		if (!dev->isoc_ctl.transfer_buffer[i]) {
+			printk("unable to allocate %i bytes for transfer"
+					" buffer %i%s\n",
+					sb_size, i,
+					in_interrupt() ? " while in int" : "");
+			au0828_uninit_isoc(dev);
+			return -ENOMEM;
+		}
+		memset(dev->isoc_ctl.transfer_buffer[i], 0, sb_size);
+
+		pipe = usb_rcvisocpipe(dev->usbdev,
+				       dev->isoc_in_endpointaddr),
+
+		usb_fill_int_urb(urb, dev->usbdev, pipe,
+				 dev->isoc_ctl.transfer_buffer[i], sb_size,
+				 au0828_irq_callback, dma_q, 1);
+
+		urb->number_of_packets = max_packets;
+		urb->transfer_flags = URB_ISO_ASAP;
+
+		k = 0;
+		for (j = 0; j < max_packets; j++) {
+			urb->iso_frame_desc[j].offset = k;
+			urb->iso_frame_desc[j].length =
+						dev->isoc_ctl.max_pkt_size;
+			k += dev->isoc_ctl.max_pkt_size;
+		}
+	}
+
+	init_waitqueue_head(&dma_q->wq);
+
+	/* submit urbs and enables IRQ */
+	for (i = 0; i < dev->isoc_ctl.num_bufs; i++) {
+		rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC);
+		if (rc) {
+			au0828_isocdbg("submit of urb %i failed (error=%i)\n",
+				       i, rc);
+			au0828_uninit_isoc(dev);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Announces that a buffer were filled and request the next
+ */
+static inline void buffer_filled(struct au0828_dev *dev,
+				  struct au0828_dmaqueue *dma_q,
+				  struct au0828_buffer *buf)
+{
+	/* Advice that buffer was filled */
+	au0828_isocdbg("[%p/%d] wakeup\n", buf, buf->vb.i);
+
+	buf->vb.state = VIDEOBUF_DONE;
+	buf->vb.field_count++;
+	do_gettimeofday(&buf->vb.ts);
+
+	dev->isoc_ctl.buf = NULL;
+
+	list_del(&buf->vb.queue);
+	wake_up(&buf->vb.done);
+}
+
+/*
+ * Identify the buffer header type and properly handles
+ */
+static void au0828_copy_video(struct au0828_dev *dev,
+			      struct au0828_dmaqueue  *dma_q,
+			      struct au0828_buffer *buf,
+			      unsigned char *p,
+			      unsigned char *outp, unsigned long len)
+{
+	void *fieldstart, *startwrite, *startread;
+	int  linesdone, currlinedone, offset, lencopy, remain;
+	int bytesperline = dev->width << 1; /* Assumes 16-bit depth @@@@ */
+
+	if (dma_q->pos + len > buf->vb.size)
+		len = buf->vb.size - dma_q->pos;
+
+	startread = p;
+	remain = len;
+
+	/* Interlaces frame */
+	if (buf->top_field)
+		fieldstart = outp;
+	else
+		fieldstart = outp + bytesperline;
+
+	linesdone = dma_q->pos / bytesperline;
+	currlinedone = dma_q->pos % bytesperline;
+	offset = linesdone * bytesperline * 2 + currlinedone;
+	startwrite = fieldstart + offset;
+	lencopy = bytesperline - currlinedone;
+	lencopy = lencopy > remain ? remain : lencopy;
+
+	if ((char *)startwrite + lencopy > (char *)outp + buf->vb.size) {
+		au0828_isocdbg("Overflow of %zi bytes past buffer end (1)\n",
+			       ((char *)startwrite + lencopy) -
+			       ((char *)outp + buf->vb.size));
+		remain = (char *)outp + buf->vb.size - (char *)startwrite;
+		lencopy = remain;
+	}
+	if (lencopy <= 0)
+		return;
+	memcpy(startwrite, startread, lencopy);
+
+	remain -= lencopy;
+
+	while (remain > 0) {
+		startwrite += lencopy + bytesperline;
+		startread += lencopy;
+		if (bytesperline > remain)
+			lencopy = remain;
+		else
+			lencopy = bytesperline;
+
+		if ((char *)startwrite + lencopy > (char *)outp +
+		    buf->vb.size) {
+			au0828_isocdbg("Overflow of %zi bytes past buffer end (2)\n",
+				       ((char *)startwrite + lencopy) -
+				       ((char *)outp + buf->vb.size));
+			lencopy = remain = (char *)outp + buf->vb.size -
+					   (char *)startwrite;
+		}
+		if (lencopy <= 0)
+			break;
+
+		memcpy(startwrite, startread, lencopy);
+
+		remain -= lencopy;
+	}
+
+	if (offset > 1440) {
+		/* We have enough data to check for greenscreen */
+		if (outp[0] < 0x60 && outp[1440] < 0x60) {
+			dev->greenscreen_detected = 1;
+		}
+	}
+
+	dma_q->pos += len;
+}
+
+/*
+ * video-buf generic routine to get the next available buffer
+ */
+static inline void get_next_buf(struct au0828_dmaqueue *dma_q,
+				struct au0828_buffer **buf)
+{
+	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
+
+	if (list_empty(&dma_q->active)) {
+		au0828_isocdbg("No active queue to serve\n");
+		dev->isoc_ctl.buf = NULL;
+		*buf = NULL;
+		return;
+	}
+
+	/* Get the next buffer */
+	*buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue);
+	dev->isoc_ctl.buf = *buf;
+
+	return;
+}
+
+/*
+ * Controls the isoc copy of each urb packet
+ */
+static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
+{
+	struct au0828_buffer    *buf;
+	struct au0828_dmaqueue  *dma_q = urb->context;
+	unsigned char *outp = NULL;
+	int i, len = 0, rc = 1;
+	unsigned char *p;
+	unsigned char fbyte;
+
+	if (!dev)
+		return 0;
+
+	if ((dev->dev_state & DEV_DISCONNECTED) ||
+	    (dev->dev_state & DEV_MISCONFIGURED))
+		return 0;
+
+	if (urb->status < 0) {
+		print_err_status(dev, -1, urb->status);
+		if (urb->status == -ENOENT)
+			return 0;
+	}
+
+	buf = dev->isoc_ctl.buf;
+	if (buf != NULL)
+		outp = videobuf_to_vmalloc(&buf->vb);
+
+	for (i = 0; i < urb->number_of_packets; i++) {
+		int status = urb->iso_frame_desc[i].status;
+
+		if (status < 0) {
+			print_err_status(dev, i, status);
+			if (urb->iso_frame_desc[i].status != -EPROTO)
+				continue;
+		}
+
+		if (urb->iso_frame_desc[i].actual_length <= 0) {
+			continue;
+		}
+		if (urb->iso_frame_desc[i].actual_length >
+						dev->max_pkt_size) {
+			au0828_isocdbg("packet bigger than packet size");
+			continue;
+		}
+
+		p = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
+		fbyte = p[0];
+		len = urb->iso_frame_desc[i].actual_length - 4;
+		p += 4;
+
+		if (fbyte & 0x80) {
+			len -= 4;
+			p += 4;
+			au0828_isocdbg("Video frame %s\n",
+				       (fbyte & 0x40) ? "odd" : "even");
+			if (!(fbyte & 0x40)) {
+				if (buf != NULL)
+					buffer_filled(dev, dma_q, buf);
+				get_next_buf(dma_q, &buf);
+				if (buf == NULL) {
+					outp = NULL;
+				} else
+					outp = videobuf_to_vmalloc(&buf->vb);
+			}
+
+			if (buf != NULL) {
+				if (fbyte & 0x40) {
+					buf->top_field = 1;
+				} else {
+					buf->top_field = 0;
+				}
+			}
+
+			dma_q->pos = 0;
+		}
+		if (buf != NULL) {
+			au0828_copy_video(dev, dma_q, buf, p, outp, len);
+		}
+	}
+	return rc;
+}
+
+static int
+buffer_setup(struct videobuf_queue *vq, unsigned int *count,
+	     unsigned int *size)
+{
+	struct au0828_fh *fh = vq->priv_data;
+	*size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3;
+
+	if (0 == *count)
+		*count = AU0828_DEF_BUF;
+
+	if (*count < AU0828_MIN_BUF)
+		*count = AU0828_MIN_BUF;
+	return 0;
+}
+
+/* This is called *without* dev->slock held; please keep it that way */
+static void free_buffer(struct videobuf_queue *vq, struct au0828_buffer *buf)
+{
+	struct au0828_fh     *fh  = vq->priv_data;
+	struct au0828_dev    *dev = fh->dev;
+	unsigned long flags = 0;
+	if (in_interrupt())
+		BUG();
+
+	/* We used to wait for the buffer to finish here, but this didn't work
+	   because, as we were keeping the state as VIDEOBUF_QUEUED,
+	   videobuf_queue_cancel marked it as finished for us.
+	   (Also, it could wedge forever if the hardware was misconfigured.)
+
+	   This should be safe; by the time we get here, the buffer isn't
+	   queued anymore. If we ever start marking the buffers as
+	   VIDEOBUF_ACTIVE, it won't be, though.
+	*/
+	spin_lock_irqsave(&dev->slock, flags);
+	if (dev->isoc_ctl.buf == buf)
+		dev->isoc_ctl.buf = NULL;
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	videobuf_vmalloc_free(&buf->vb);
+	buf->vb.state = VIDEOBUF_NEEDS_INIT;
+}
+
+static int
+buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+						enum v4l2_field field)
+{
+	struct au0828_fh     *fh  = vq->priv_data;
+	struct au0828_buffer *buf = container_of(vb, struct au0828_buffer, vb);
+	struct au0828_dev    *dev = fh->dev;
+	int                  rc = 0, urb_init = 0;
+
+	buf->vb.size = (fh->dev->width * fh->dev->height * 16 + 7) >> 3;
+
+	if (0 != buf->vb.baddr  &&  buf->vb.bsize < buf->vb.size)
+		return -EINVAL;
+
+	buf->vb.width  = dev->width;
+	buf->vb.height = dev->height;
+	buf->vb.field  = field;
+
+	if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
+		rc = videobuf_iolock(vq, &buf->vb, NULL);
+		if (rc < 0) {
+			printk("videobuf_iolock failed\n");
+			goto fail;
+		}
+	}
+
+	if (!dev->isoc_ctl.num_bufs)
+		urb_init = 1;
+
+	if (urb_init) {
+		rc = au0828_init_isoc(dev, AU0828_ISO_PACKETS_PER_URB,
+				      AU0828_MAX_ISO_BUFS, dev->max_pkt_size,
+				      au0828_isoc_copy);
+		if (rc < 0) {
+			printk("au0828_init_isoc failed\n");
+			goto fail;
+		}
+	}
+
+	buf->vb.state = VIDEOBUF_PREPARED;
+	return 0;
+
+fail:
+	free_buffer(vq, buf);
+	return rc;
+}
+
+static void
+buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct au0828_buffer    *buf     = container_of(vb,
+							struct au0828_buffer,
+							vb);
+	struct au0828_fh        *fh      = vq->priv_data;
+	struct au0828_dev       *dev     = fh->dev;
+	struct au0828_dmaqueue  *vidq    = &dev->vidq;
+
+	buf->vb.state = VIDEOBUF_QUEUED;
+	list_add_tail(&buf->vb.queue, &vidq->active);
+}
+
+static void buffer_release(struct videobuf_queue *vq,
+				struct videobuf_buffer *vb)
+{
+	struct au0828_buffer   *buf  = container_of(vb,
+						    struct au0828_buffer,
+						    vb);
+
+	free_buffer(vq, buf);
+}
+
+static struct videobuf_queue_ops au0828_video_qops = {
+	.buf_setup      = buffer_setup,
+	.buf_prepare    = buffer_prepare,
+	.buf_queue      = buffer_queue,
+	.buf_release    = buffer_release,
+};
+
+/* ------------------------------------------------------------------
+   V4L2 interface
+   ------------------------------------------------------------------*/
+
+static int au0828_i2s_init(struct au0828_dev *dev)
+{
+	/* Enable i2s mode */
+	au0828_writereg(dev, AU0828_AUDIOCTRL_50C, 0x01);
+	return 0;
+}
+
+/*
+ * Auvitek au0828 analog stream enable
+ * Please set interface0 to AS5 before enable the stream
+ */
+int au0828_analog_stream_enable(struct au0828_dev *d)
+{
+	dprintk(1, "au0828_analog_stream_enable called\n");
+	au0828_writereg(d, AU0828_SENSORCTRL_VBI_103, 0x00);
+	au0828_writereg(d, 0x106, 0x00);
+	/* set x position */
+	au0828_writereg(d, 0x110, 0x00);
+	au0828_writereg(d, 0x111, 0x00);
+	au0828_writereg(d, 0x114, 0xa0);
+	au0828_writereg(d, 0x115, 0x05);
+	/* set y position */
+	au0828_writereg(d, 0x112, 0x02);
+	au0828_writereg(d, 0x113, 0x00);
+	au0828_writereg(d, 0x116, 0xf2);
+	au0828_writereg(d, 0x117, 0x00);
+	au0828_writereg(d, AU0828_SENSORCTRL_100, 0xb3);
+
+	return 0;
+}
+
+int au0828_analog_stream_disable(struct au0828_dev *d)
+{
+	dprintk(1, "au0828_analog_stream_disable called\n");
+	au0828_writereg(d, AU0828_SENSORCTRL_100, 0x0);
+	return 0;
+}
+
+void au0828_analog_stream_reset(struct au0828_dev *dev)
+{
+	dprintk(1, "au0828_analog_stream_reset called\n");
+	au0828_writereg(dev, AU0828_SENSORCTRL_100, 0x0);
+	mdelay(30);
+	au0828_writereg(dev, AU0828_SENSORCTRL_100, 0xb3);
+}
+
+/*
+ * Some operations needs to stop current streaming
+ */
+static int au0828_stream_interrupt(struct au0828_dev *dev)
+{
+	int ret = 0;
+
+	dev->stream_state = STREAM_INTERRUPT;
+	if(dev->dev_state == DEV_DISCONNECTED)
+		return -ENODEV;
+	else if(ret) {
+		dev->dev_state = DEV_MISCONFIGURED;
+		dprintk(1, "%s device is misconfigured!\n", __FUNCTION__);
+		return ret;
+	}
+	return 0;
+}
+
+/*
+ * au0828_release_resources
+ * unregister v4l2 devices
+ */
+void au0828_analog_unregister(struct au0828_dev *dev)
+{
+	dprintk(1, "au0828_release_resources called\n");
+	mutex_lock(&au0828_sysfs_lock);
+
+	list_del(&dev->au0828list);
+	video_unregister_device(dev->vdev);
+	video_unregister_device(dev->vbi_dev);
+
+	mutex_unlock(&au0828_sysfs_lock);
+}
+
+
+/* Usage lock check functions */
+static int res_get(struct au0828_fh *fh)
+{
+	struct au0828_dev *dev = fh->dev;
+	int		 rc   = 0;
+
+	/* This instance already has stream_on */
+	if (fh->stream_on)
+		return rc;
+
+	if (dev->stream_on)
+		return -EBUSY;
+
+	dev->stream_on = 1;
+	fh->stream_on  = 1;
+	return rc;
+}
+
+static int res_check(struct au0828_fh *fh)
+{
+	return fh->stream_on;
+}
+
+static void res_free(struct au0828_fh *fh)
+{
+	struct au0828_dev *dev = fh->dev;
+
+	fh->stream_on = 0;
+	dev->stream_on = 0;
+}
+
+static int au0828_v4l2_open(struct file *filp)
+{
+	int minor = video_devdata(filp)->minor;
+	int ret = 0;
+	struct au0828_dev *h, *dev = NULL;
+	struct au0828_fh *fh;
+	int type = 0;
+	struct list_head *list;
+
+	list_for_each(list, &au0828_devlist) {
+		h = list_entry(list, struct au0828_dev, au0828list);
+		if(h->vdev->minor == minor) {
+			dev = h;
+			type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		}
+		if(h->vbi_dev->minor == minor) {
+			dev = h;
+			type = V4L2_BUF_TYPE_VBI_CAPTURE;
+		}
+	}
+
+	if(NULL == dev)
+		return -ENODEV;
+
+	fh = kzalloc(sizeof(struct au0828_fh), GFP_KERNEL);
+	if(NULL == fh) {
+		dprintk(1, "Failed allocate au0828_fh struct!\n");
+		return -ENOMEM;
+	}
+
+	fh->type = type;
+	fh->dev = dev;
+	filp->private_data = fh;
+
+	if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE && dev->users == 0) {
+		/* set au0828 interface0 to AS5 here again */
+		ret = usb_set_interface(dev->usbdev, 0, 5);
+		if(ret < 0) {
+			printk("Au0828 can't set alt setting to 5!\n");
+			return -EBUSY;
+		}
+		dev->width = NTSC_STD_W;
+		dev->height = NTSC_STD_H;
+		dev->frame_size = dev->width * dev->height * 2;
+		dev->field_size = dev->width * dev->height;
+		dev->bytesperline = dev->width * 2;
+
+		au0828_analog_stream_enable(dev);
+		au0828_analog_stream_reset(dev);
+
+		/* If we were doing ac97 instead of i2s, it would go here...*/
+		au0828_i2s_init(dev);
+
+		dev->stream_state = STREAM_OFF;
+		dev->dev_state |= DEV_INITIALIZED;
+	}
+
+	dev->users++;
+
+	videobuf_queue_vmalloc_init(&fh->vb_vidq, &au0828_video_qops,
+				    NULL, &dev->slock, fh->type,
+				    V4L2_FIELD_INTERLACED,
+				    sizeof(struct au0828_buffer), fh);
+
+	return ret;
+}
+
+static int au0828_v4l2_close(struct file *filp)
+{
+	int ret;
+	struct au0828_fh *fh = filp->private_data;
+	struct au0828_dev *dev = fh->dev;
+
+	mutex_lock(&dev->lock);
+	if (res_check(fh))
+		res_free(fh);
+
+	if(dev->users == 1) {
+		videobuf_stop(&fh->vb_vidq);
+		videobuf_mmap_free(&fh->vb_vidq);
+
+		if(dev->dev_state & DEV_DISCONNECTED) {
+			au0828_analog_unregister(dev);
+			mutex_unlock(&dev->lock);
+			kfree(dev);
+			return 0;
+		}
+
+		au0828_analog_stream_disable(dev);
+
+		au0828_uninit_isoc(dev);
+
+		/* When close the device, set the usb intf0 into alt0 to free
+		   USB bandwidth */
+		ret = usb_set_interface(dev->usbdev, 0, 0);
+		if(ret < 0)
+			printk("Au0828 can't set alt setting to 0!\n");
+	}
+
+	kfree(fh);
+	dev->users--;
+	wake_up_interruptible_nr(&dev->open, 1);
+	mutex_unlock(&dev->lock);
+	return 0;
+}
+
+static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf,
+				size_t count, loff_t *pos)
+{
+	struct au0828_fh *fh = filp->private_data;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	if(fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		mutex_lock(&dev->lock);
+		rc = res_get(fh);
+		mutex_unlock(&dev->lock);
+
+		if (unlikely(rc < 0))
+			return rc;
+
+		return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,
+					filp->f_flags & O_NONBLOCK);
+	}
+	return 0;
+}
+
+static unsigned int au0828_v4l2_poll(struct file *filp, poll_table *wait)
+{
+	struct au0828_fh *fh = filp->private_data;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	mutex_lock(&dev->lock);
+	rc = res_get(fh);
+	mutex_unlock(&dev->lock);
+
+	if (unlikely(rc < 0))
+		return POLLERR;
+
+	if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type)
+		return POLLERR;
+
+	return videobuf_poll_stream(filp, &fh->vb_vidq, wait);
+}
+
+static int au0828_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	struct au0828_fh *fh    = filp->private_data;
+	struct au0828_dev *dev   = fh->dev;
+	int		 rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	mutex_lock(&dev->lock);
+	rc = res_get(fh);
+	mutex_unlock(&dev->lock);
+
+	if (unlikely(rc < 0))
+		return rc;
+
+	rc = videobuf_mmap_mapper(&fh->vb_vidq, vma);
+
+	dprintk(2, "vma start=0x%08lx, size=%ld, ret=%d\n",
+		(unsigned long)vma->vm_start,
+		(unsigned long)vma->vm_end-(unsigned long)vma->vm_start,
+		rc);
+
+	return rc;
+}
+
+static int au0828_set_format(struct au0828_dev *dev, unsigned int cmd,
+			     struct v4l2_format *format)
+{
+	int ret;
+	int width = format->fmt.pix.width;
+	int height = format->fmt.pix.height;
+	unsigned int maxwidth, maxheight;
+
+	maxwidth = 720;
+	maxheight = 480;
+
+	if(format->type == V4L2_BUF_TYPE_SLICED_VBI_CAPTURE) {
+		dprintk(1, "VBI format set: to be supported!\n");
+		return 0;
+	}
+	if(format->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		return 0;
+	}
+	if(format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		return -EINVAL;
+	}
+
+	/* If they are demanding a format other than the one we support,
+	   bail out (tvtime asks for UYVY and then retries with YUYV) */
+	if (format->fmt.pix.pixelformat != V4L2_PIX_FMT_UYVY) {
+		return -EINVAL;
+	}
+
+	/* format->fmt.pix.width only support 720 and height 480 */
+	if(width != 720)
+		width = 720;
+	if(height != 480)
+		height = 480;
+
+	format->fmt.pix.width = width;
+	format->fmt.pix.height = height;
+	format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	format->fmt.pix.bytesperline = width * 2;
+	format->fmt.pix.sizeimage = width * height * 2;
+	format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	format->fmt.pix.field = V4L2_FIELD_INTERLACED;
+
+	if(cmd == VIDIOC_TRY_FMT)
+		return 0;
+
+	/* maybe set new image format, driver current only support 720*480 */
+	dev->width = width;
+	dev->height = height;
+	dev->frame_size = width * height * 2;
+	dev->field_size = width * height;
+	dev->bytesperline = width * 2;
+
+	if(dev->stream_state == STREAM_ON) {
+		dprintk(1, "VIDIOC_SET_FMT: interrupting stream!\n");
+		if((ret = au0828_stream_interrupt(dev))) {
+			dprintk(1, "error interrupting video stream!\n");
+			return ret;
+		}
+	}
+
+	/* set au0828 interface0 to AS5 here again */
+	ret = usb_set_interface(dev->usbdev, 0, 5);
+	if(ret < 0) {
+		printk("Au0828 can't set alt setting to 5!\n");
+		return -EBUSY;
+	}
+
+	au0828_analog_stream_enable(dev);
+
+	return 0;
+}
+
+
+static int vidioc_queryctrl(struct file *file, void *priv,
+			    struct v4l2_queryctrl *qc)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	au0828_call_i2c_clients(dev, VIDIOC_QUERYCTRL, qc);
+	if (qc->type)
+		return 0;
+	else
+		return -EINVAL;
+}
+
+static int vidioc_querycap(struct file *file, void  *priv,
+			   struct v4l2_capability *cap)
+{
+	struct au0828_fh *fh  = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	memset(cap, 0, sizeof(*cap));
+	strlcpy(cap->driver, "au0828", sizeof(cap->driver));
+	strlcpy(cap->card, au0828_boards[dev->board].name, sizeof(cap->card));
+	strlcpy(cap->bus_info, dev->usbdev->dev.bus_id, sizeof(cap->bus_info));
+
+	cap->version = AU0828_VERSION_CODE;
+
+	/*set the device capabilities */
+	cap->capabilities = V4L2_CAP_VBI_CAPTURE |
+		V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_AUDIO |
+		V4L2_CAP_READWRITE |
+		V4L2_CAP_STREAMING |
+		V4L2_CAP_TUNER;
+	return 0;
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+					struct v4l2_fmtdesc *f)
+{
+	if(f->index)
+		return -EINVAL;
+
+	memset(f, 0, sizeof(*f));
+	f->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	strcpy(f->description, "Packed YUV2");
+
+	f->flags = 0;
+	f->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	memset(f->reserved, 0, sizeof(f->reserved));
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+					struct v4l2_format *f)
+{
+	struct au0828_fh *fh  = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	f->fmt.pix.width = dev->width;
+	f->fmt.pix.height = dev->height;
+	f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	f->fmt.pix.bytesperline = dev->bytesperline;
+	f->fmt.pix.sizeimage = dev->frame_size;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; /* NTSC/PAL */
+	f->fmt.pix.field = V4L2_FIELD_INTERLACED;
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct au0828_fh *fh  = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	return au0828_set_format(dev, VIDIOC_TRY_FMT, f);
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct au0828_fh *fh  = priv;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
+		printk("%s queue busy\n", __func__);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	if (dev->stream_on && !fh->stream_on) {
+		printk("%s device in use by another fh\n", __func__);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	return au0828_set_format(dev, VIDIOC_S_FMT, f);
+out:
+	return rc;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id * norm)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	/* FIXME: when we support something other than NTSC, we are going to
+	   have to make the au0828 bridge adjust the size of its capture
+	   buffer, which is currently hardcoded at 720x480 */
+
+	au0828_call_i2c_clients(dev, VIDIOC_S_STD, norm);
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+				struct v4l2_input *input)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	unsigned int tmp;
+
+	static const char *inames[] = {
+		[AU0828_VMUX_COMPOSITE] = "Composite",
+		[AU0828_VMUX_SVIDEO] = "S-Video",
+		[AU0828_VMUX_CABLE] = "Cable TV",
+		[AU0828_VMUX_TELEVISION] = "Television",
+		[AU0828_VMUX_DVB] = "DVB",
+		[AU0828_VMUX_DEBUG] = "tv debug"
+	};
+
+	tmp = input->index;
+
+	if(tmp > AU0828_MAX_INPUT)
+		return -EINVAL;
+	if(AUVI_INPUT(tmp)->type == 0)
+		return -EINVAL;
+
+	memset(input, 0, sizeof(*input));
+	input->index = tmp;
+	strcpy(input->name, inames[AUVI_INPUT(tmp)->type]);
+	if((AUVI_INPUT(tmp)->type == AU0828_VMUX_TELEVISION) ||
+	   (AUVI_INPUT(tmp)->type == AU0828_VMUX_CABLE))
+		input->type |= V4L2_INPUT_TYPE_TUNER;
+	else
+		input->type |= V4L2_INPUT_TYPE_CAMERA;
+
+	input->std = dev->vdev->tvnorms;
+
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	*i = dev->ctrl_input;
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int index)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int i;
+	struct v4l2_routing route;
+
+	dprintk(1, "VIDIOC_S_INPUT in function %s, input=%d\n", __FUNCTION__,
+		index);
+	if(index >= AU0828_MAX_INPUT)
+		return -EINVAL;
+	if(AUVI_INPUT(index)->type == 0)
+		return -EINVAL;
+	dev->ctrl_input = index;
+
+	switch(AUVI_INPUT(index)->type) {
+	case AU0828_VMUX_SVIDEO:
+	{
+		dev->input_type = AU0828_VMUX_SVIDEO;
+		break;
+	}
+	case AU0828_VMUX_COMPOSITE:
+	{
+		dev->input_type = AU0828_VMUX_COMPOSITE;
+		break;
+	}
+	case AU0828_VMUX_TELEVISION:
+	{
+		dev->input_type = AU0828_VMUX_TELEVISION;
+		break;
+	}
+	default:
+		;
+	}
+
+	route.input = AUVI_INPUT(index)->vmux;
+	route.output = 0;
+	au0828_call_i2c_clients(dev, VIDIOC_INT_S_VIDEO_ROUTING, &route);
+
+	for (i = 0; i < AU0828_MAX_INPUT; i++) {
+		int enable = 0;
+		if (AUVI_INPUT(i)->audio_setup == NULL) {
+			continue;
+		}
+
+		if (i == index)
+			enable = 1;
+		else
+			enable = 0;
+		if (enable) {
+			(AUVI_INPUT(i)->audio_setup)(dev, enable);
+		} else {
+			/* Make sure we leave it turned on if some
+			   other input is routed to this callback */
+			if ((AUVI_INPUT(i)->audio_setup) !=
+			    ((AUVI_INPUT(index)->audio_setup))) {
+				(AUVI_INPUT(i)->audio_setup)(dev, enable);
+			}
+		}
+	}
+
+	route.input = AUVI_INPUT(index)->amux;
+	au0828_call_i2c_clients(dev, VIDIOC_INT_S_AUDIO_ROUTING,
+				&route);
+	return 0;
+}
+
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	unsigned int index = a->index;
+
+	if(a->index > 1)
+		return -EINVAL;
+
+	memset(a, 0, sizeof(*a));
+	index = dev->ctrl_ainput;
+	if(index == 0)
+		strcpy(a->name, "Television");
+	else
+		strcpy(a->name, "Line in");
+
+	a->capability = V4L2_AUDCAP_STEREO;
+	a->index = index;
+	return 0;
+}
+
+static int vidioc_s_audio(struct file *file, void *priv, struct v4l2_audio *a)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	if(a->index != dev->ctrl_ainput)
+		return -EINVAL;
+	return 0;
+}
+
+static int vidioc_g_ctrl(struct file *file, void *priv,
+			 struct v4l2_control *ctrl)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	au0828_call_i2c_clients(dev, VIDIOC_G_CTRL, ctrl);
+	return 0;
+
+}
+
+static int vidioc_s_ctrl(struct file *file, void *priv,
+				struct v4l2_control *ctrl)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	au0828_call_i2c_clients(dev, VIDIOC_S_CTRL, ctrl);
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	if(t->index != 0)
+		return -EINVAL;
+
+	memset(t, 0, sizeof(*t));
+	strcpy(t->name, "Auvitek tuner");
+
+	au0828_call_i2c_clients(dev, VIDIOC_G_TUNER, t);
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+				struct v4l2_tuner *t)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	if(t->index != 0)
+		return -EINVAL;
+
+	t->type = V4L2_TUNER_ANALOG_TV;
+	au0828_call_i2c_clients(dev, VIDIOC_S_TUNER, t);
+	dprintk(1, "VIDIOC_S_TUNER: signal = %x, afc = %x\n", t->signal,
+		t->afc);
+	return 0;
+
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *freq)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	memset(freq, 0, sizeof(*freq));
+	freq->type = V4L2_TUNER_ANALOG_TV;
+	freq->frequency = dev->ctrl_freq;
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+				struct v4l2_frequency *freq)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	if(freq->tuner != 0)
+		return -EINVAL;
+	if(freq->type != V4L2_TUNER_ANALOG_TV)
+		return -EINVAL;
+
+	dev->ctrl_freq = freq->frequency;
+
+	au0828_call_i2c_clients(dev, VIDIOC_S_FREQUENCY, freq);
+
+	au0828_analog_stream_reset(dev);
+
+	return 0;
+}
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+	       struct v4l2_dbg_chip_ident *chip)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	chip->ident = V4L2_IDENT_NONE;
+	chip->revision = 0;
+
+	au0828_call_i2c_clients(dev, VIDIOC_DBG_G_CHIP_IDENT, chip);
+	return 0;
+}
+
+static int vidioc_cropcap(struct file *file, void *priv,
+			  struct v4l2_cropcap *cc)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	if(cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	cc->bounds.left = 0;
+	cc->bounds.top = 0;
+	cc->bounds.width = dev->width;
+	cc->bounds.height = dev->height;
+
+	cc->defrect = cc->bounds;
+
+	cc->pixelaspect.numerator = 54;
+	cc->pixelaspect.denominator = 59;
+
+	return 0;
+}
+
+static int vidioc_streamon(struct file *file, void *priv,
+			   enum v4l2_buf_type type)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int b = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		au0828_analog_stream_enable(dev);
+		au0828_call_i2c_clients(dev, VIDIOC_STREAMON, &b);
+	}
+
+	mutex_lock(&dev->lock);
+	rc = res_get(fh);
+
+	if (likely(rc >= 0))
+		rc = videobuf_streamon(&fh->vb_vidq);
+	mutex_unlock(&dev->lock);
+
+	return rc;
+}
+
+static int vidioc_streamoff(struct file *file, void *priv,
+			    enum v4l2_buf_type type)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int b = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	int i;
+	int ret;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+	if (type != fh->type)
+		return -EINVAL;
+
+	if (type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		au0828_call_i2c_clients(dev, VIDIOC_STREAMOFF, &b);
+		if((ret = au0828_stream_interrupt(dev)) != 0)
+			return ret;
+	}
+
+	for (i = 0; i < AU0828_MAX_INPUT; i++) {
+		if (AUVI_INPUT(i)->audio_setup == NULL) {
+			continue;
+		}
+		(AUVI_INPUT(i)->audio_setup)(dev, 0);
+	}
+
+	mutex_lock(&dev->lock);
+	videobuf_streamoff(&fh->vb_vidq);
+	res_free(fh);
+	mutex_unlock(&dev->lock);
+
+	return 0;
+}
+
+static int vidioc_g_register(struct file *file, void *priv,
+			     struct v4l2_dbg_register *reg)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	switch (reg->match.type) {
+	case V4L2_CHIP_MATCH_I2C_DRIVER:
+		au0828_call_i2c_clients(dev, VIDIOC_DBG_G_REGISTER, reg);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+			     struct v4l2_dbg_register *reg)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+
+	switch (reg->match.type) {
+	case V4L2_CHIP_MATCH_I2C_DRIVER:
+		au0828_call_i2c_clients(dev, VIDIOC_DBG_S_REGISTER, reg);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int vidioc_reqbufs(struct file *file, void *priv,
+			  struct v4l2_requestbuffers *rb)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	return videobuf_reqbufs(&fh->vb_vidq, rb);
+}
+
+static int vidioc_querybuf(struct file *file, void *priv,
+			   struct v4l2_buffer *b)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	return videobuf_querybuf(&fh->vb_vidq, b);
+}
+
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	return videobuf_qbuf(&fh->vb_vidq, b);
+}
+
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
+{
+	struct au0828_fh *fh = priv;
+	struct au0828_dev *dev = fh->dev;
+	int rc;
+
+	rc = check_dev(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Workaround for a bug in the au0828 hardware design that sometimes
+	   results in the colorspace being inverted */
+	if (dev->greenscreen_detected == 1) {
+		dprintk(1, "Detected green frame.  Resetting stream...\n");
+		au0828_analog_stream_reset(dev);
+		dev->greenscreen_detected = 0;
+	}
+
+	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+}
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
+{
+	struct au0828_fh *fh = priv;
+
+	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
+}
+#endif
+
+static struct v4l2_file_operations au0828_v4l_fops = {
+	.owner      = THIS_MODULE,
+	.open       = au0828_v4l2_open,
+	.release    = au0828_v4l2_close,
+	.read       = au0828_v4l2_read,
+	.poll       = au0828_v4l2_poll,
+	.mmap       = au0828_v4l2_mmap,
+	.ioctl      = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+	.vidioc_querycap            = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap    = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap       = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap     = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap       = vidioc_s_fmt_vid_cap,
+	.vidioc_g_audio             = vidioc_g_audio,
+	.vidioc_s_audio             = vidioc_s_audio,
+	.vidioc_cropcap             = vidioc_cropcap,
+#ifdef AAA
+	.vidioc_g_fmt_sliced_vbi_cap   = vidioc_g_fmt_sliced_vbi_cap,
+	.vidioc_try_fmt_sliced_vbi_cap = vidioc_try_set_sliced_vbi_cap,
+	.vidioc_s_fmt_sliced_vbi_cap   = vidioc_try_set_sliced_vbi_cap,
+#endif
+	.vidioc_reqbufs             = vidioc_reqbufs,
+	.vidioc_querybuf            = vidioc_querybuf,
+	.vidioc_qbuf                = vidioc_qbuf,
+	.vidioc_dqbuf               = vidioc_dqbuf,
+	.vidioc_s_std               = vidioc_s_std,
+	.vidioc_enum_input          = vidioc_enum_input,
+	.vidioc_g_input             = vidioc_g_input,
+	.vidioc_s_input             = vidioc_s_input,
+	.vidioc_queryctrl           = vidioc_queryctrl,
+	.vidioc_g_ctrl              = vidioc_g_ctrl,
+	.vidioc_s_ctrl              = vidioc_s_ctrl,
+	.vidioc_streamon            = vidioc_streamon,
+	.vidioc_streamoff           = vidioc_streamoff,
+	.vidioc_g_tuner             = vidioc_g_tuner,
+	.vidioc_s_tuner             = vidioc_s_tuner,
+	.vidioc_g_frequency         = vidioc_g_frequency,
+	.vidioc_s_frequency         = vidioc_s_frequency,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register          = vidioc_g_register,
+	.vidioc_s_register          = vidioc_s_register,
+	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
+#endif
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+	.vidiocgmbuf                = vidiocgmbuf,
+#endif
+};
+
+static const struct video_device au0828_video_template = {
+	.fops                       = &au0828_v4l_fops,
+	.release                    = video_device_release,
+	.ioctl_ops 		    = &video_ioctl_ops,
+	.minor                      = -1,
+	.tvnorms                    = V4L2_STD_NTSC,
+	.current_norm               = V4L2_STD_NTSC,
+};
+
+/**************************************************************************/
+
+int au0828_analog_register(struct au0828_dev *dev)
+{
+	int retval = -ENOMEM;
+
+	dprintk(1, "au0828_analog_register called!\n");
+
+	/* Load the analog demodulator driver (note this would need to be
+	   abstracted out if we ever need to support a different demod) */
+	request_module("au8522");
+
+	/* Load the tuner module, which results in i2c enumeration and
+	   attachment of whatever tuner is on the bus */
+	request_module("tuner");
+
+	init_waitqueue_head(&dev->open);
+	spin_lock_init(&dev->slock);
+	mutex_init(&dev->lock);
+
+	INIT_LIST_HEAD(&dev->vidq.active);
+	INIT_LIST_HEAD(&dev->vidq.queued);
+
+	dev->width = NTSC_STD_W;
+	dev->height = NTSC_STD_H;
+	dev->field_size = dev->width * dev->height;
+	dev->frame_size = dev->field_size << 1;
+	dev->bytesperline = dev->width << 1;
+	dev->ctrl_ainput = 0;
+
+	/* allocate and fill v4l2 video struct */
+	dev->vdev = video_device_alloc();
+	if(NULL == dev->vdev) {
+		dprintk(1, "Can't allocate video_device.\n");
+		return -ENOMEM;
+	}
+
+	dev->vbi_dev = video_device_alloc();
+	if(NULL == dev->vbi_dev) {
+		dprintk(1, "Can't allocate vbi_device.\n");
+		kfree(dev->vdev);
+		return -ENOMEM;
+	}
+
+	/* Fill the video capture device struct */
+	*dev->vdev = au0828_video_template;
+	dev->vdev->vfl_type = VID_TYPE_CAPTURE | VID_TYPE_TUNER;
+	dev->vdev->parent = &dev->usbdev->dev;
+	strcpy(dev->vdev->name, "au0828a video");
+
+	/* Setup the VBI device */
+	*dev->vbi_dev = au0828_video_template;
+	dev->vbi_dev->vfl_type = VFL_TYPE_VBI;
+	dev->vbi_dev->parent = &dev->usbdev->dev;
+	strcpy(dev->vbi_dev->name, "au0828a vbi");
+
+	list_add_tail(&dev->au0828list, &au0828_devlist);
+
+	/* Register the v4l2 device */
+	if((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1)) != 0) {
+		dprintk(1, "unable to register video device (error = %d).\n", retval);
+		list_del(&dev->au0828list);
+		video_device_release(dev->vdev);
+		return -ENODEV;
+	}
+
+	/* Register the vbi device */
+	if((retval = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, -1)) != 0) {
+		dprintk(1, "unable to register vbi device (error = %d).\n", retval);
+		list_del(&dev->au0828list);
+		video_device_release(dev->vbi_dev);
+		video_device_release(dev->vdev);
+		return -ENODEV;
+	}
+
+	dprintk(1, "%s completed!\n", __FUNCTION__);
+
+	return 0;
+}
+

drivers/media/video/au0828/au0828.h

@@ -24,6 +24,10 @@
 #include <linux/i2c-algo-bit.h>
 #include <media/tveeprom.h>
 
+/* Analog */
+#include <linux/videodev2.h>
+#include <media/videobuf-vmalloc.h>
+
 /* DVB */
 #include "demux.h"
 #include "dmxdev.h"
@@ -39,8 +43,48 @@
 #define URB_COUNT   16
 #define URB_BUFSIZE (0xe522)
 
+/* Analog constants */
+#define NTSC_STD_W      720
+#define NTSC_STD_H      480
+
+#define AU0828_INTERLACED_DEFAULT       1
+#define V4L2_CID_PRIVATE_SHARPNESS  (V4L2_CID_PRIVATE_BASE + 0)
+
+/* Defination for AU0828 USB transfer */
+#define AU0828_MAX_ISO_BUFS    12  /* maybe resize this value in the future */
+#define AU0828_ISO_PACKETS_PER_URB      10
+#define AU0828_ISO_MAX_FRAME_SIZE       (3 * 1024)
+#define AU0828_ISO_BUFFER_SIZE          (AU0828_ISO_PACKETS_PER_URB * AU0828_ISO_MAX_FRAME_SIZE)
+
+#define AU0828_MIN_BUF 4
+#define AU0828_DEF_BUF 8
+
+#define AU0828_MAX_IMAGES       10
+#define AU0828_FRAME_SIZE       (1028 * 1024 * 4)
+#define AU0828_URB_TIMEOUT      msecs_to_jiffies(AU0828_MAX_ISO_BUFS * AU0828_ISO_PACKETS_PER_URB)
+
+#define AU0828_MAX_INPUT        4
+
+enum au0828_itype {
+	AU0828_VMUX_COMPOSITE = 1,
+	AU0828_VMUX_SVIDEO,
+	AU0828_VMUX_CABLE,
+	AU0828_VMUX_TELEVISION,
+	AU0828_VMUX_DVB,
+	AU0828_VMUX_DEBUG
+};
+
+struct au0828_input {
+	enum au0828_itype type;
+	unsigned int vmux;
+	unsigned int amux;
+	void (*audio_setup) (void *priv, int enable);
+};
+
 struct au0828_board {
 	char *name;
+	struct au0828_input input[AU0828_MAX_INPUT];
+
 };
 
 struct au0828_dvb {
@@ -55,6 +99,83 @@ struct au0828_dvb {
 	int feeding;
 };
 
+enum au0828_stream_state {
+	STREAM_OFF,
+	STREAM_INTERRUPT,
+	STREAM_ON
+};
+
+#define AUVI_INPUT(nr) (&au0828_boards[dev->board].input[nr])
+
+/* device state */
+enum au0828_dev_state {
+	DEV_INITIALIZED = 0x01,
+	DEV_DISCONNECTED = 0x02,
+	DEV_MISCONFIGURED = 0x04
+};
+
+struct au0828_fh {
+	struct au0828_dev *dev;
+	unsigned int  stream_on:1;	/* Locks streams */
+	struct videobuf_queue        vb_vidq;
+	enum v4l2_buf_type           type;
+};
+
+struct au0828_usb_isoc_ctl {
+		/* max packet size of isoc transaction */
+	int				max_pkt_size;
+
+		/* number of allocated urbs */
+	int				num_bufs;
+
+		/* urb for isoc transfers */
+	struct urb			**urb;
+
+		/* transfer buffers for isoc transfer */
+	char				**transfer_buffer;
+
+		/* Last buffer command and region */
+	u8				cmd;
+	int				pos, size, pktsize;
+
+		/* Last field: ODD or EVEN? */
+	int				field;
+
+		/* Stores incomplete commands */
+	u32				tmp_buf;
+	int				tmp_buf_len;
+
+		/* Stores already requested buffers */
+	struct au0828_buffer    	*buf;
+
+		/* Stores the number of received fields */
+	int				nfields;
+
+		/* isoc urb callback */
+	int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb);
+
+};
+
+/* buffer for one video frame */
+struct au0828_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer vb;
+
+	struct list_head frame;
+	int top_field;
+	int receiving;
+};
+
+struct au0828_dmaqueue {
+	struct list_head       active;
+	struct list_head       queued;
+
+	wait_queue_head_t          wq;
+
+	/* Counters to control buffer fill */
+	int                        pos;
+};
+
 struct au0828_dev {
 	struct mutex mutex;
 	struct usb_device	*usbdev;
@@ -70,16 +191,49 @@ struct au0828_dev {
 	/* Digital */
 	struct au0828_dvb		dvb;
 
+	/* Analog */
+	struct list_head au0828list;
+	int users;
+	unsigned int stream_on:1;	/* Locks streams */
+	struct video_device *vdev;
+	struct video_device *vbi_dev;
+	int width;
+	int height;
+	u32 field_size;
+	u32 frame_size;
+	u32 bytesperline;
+	int type;
+	u8 ctrl_ainput;
+	__u8 isoc_in_endpointaddr;
+	u8 isoc_init_ok;
+	int greenscreen_detected;
+	unsigned int frame_count;
+	int ctrl_freq;
+	int input_type;
+	unsigned int ctrl_input;
+	enum au0828_dev_state dev_state;
+	enum au0828_stream_state stream_state;
+	wait_queue_head_t open;
+
+	struct mutex lock;
+
+	/* Isoc control struct */
+	struct au0828_dmaqueue vidq;
+	struct au0828_usb_isoc_ctl isoc_ctl;
+	spinlock_t slock;
+
+	/* usb transfer */
+	int alt;		/* alternate */
+	int max_pkt_size;	/* max packet size of isoc transaction */
+	int num_alt;		/* Number of alternative settings */
+	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
+	struct urb *urb[AU0828_MAX_ISO_BUFS];	/* urb for isoc transfers */
+	char *transfer_buffer[AU0828_MAX_ISO_BUFS];/* transfer buffers for isoc
+						   transfer */
+
 	/* USB / URB Related */
 	int		urb_streaming;
 	struct urb	*urbs[URB_COUNT];
-
-};
-
-struct au0828_buff {
-	struct au0828_dev	*dev;
-	struct urb		*purb;
-	struct list_head	buff_list;
 };
 
 /* ----------------------------------------------------------- */
@@ -114,6 +268,12 @@ extern int au0828_i2c_unregister(struct au0828_dev *dev);
 extern void au0828_call_i2c_clients(struct au0828_dev *dev,
 	unsigned int cmd, void *arg);
 
+/* ----------------------------------------------------------- */
+/* au0828-video.c */
+int au0828_analog_register(struct au0828_dev *dev);
+int au0828_analog_stream_disable(struct au0828_dev *d);
+void au0828_analog_unregister(struct au0828_dev *dev);
+
 /* ----------------------------------------------------------- */
 /* au0828-dvb.c */
 extern int au0828_dvb_register(struct au0828_dev *dev);