Merge tag 'reset-for-4.13' of git://git.pengutronix.de/git/pza/linux into next/drivers

Reset controller changes for v4.13

- Use devm_kcalloc to allocate the channels array in sti/reset-syscfg
- Rename the TI_SYSCON_RESET Kconfig option to RESET_TI_SYSCON for
  consistency
- Add new reset driver and DT bindings for Cortina Systems Gemini
  reset controller

* tag 'reset-for-4.13' of git://git.pengutronix.de/git/pza/linux:
  reset: Add a Gemini reset controller
  reset: add DT bindings header for Gemini reset controller
  reset: ti_syscon: Rename TI_SYSCON_RESET to RESET_TI_SYSCON
  reset: sti: Use devm_kcalloc() in syscfg_reset_controller_register()
Signed-off-by: Olof Johansson <olof@lixom.net>

drivers/reset/Kconfig

@@ -34,6 +34,13 @@ config RESET_BERLIN
 	help
 	  This enables the reset controller driver for Marvell Berlin SoCs.
 
+config RESET_GEMINI
+	bool "Gemini Reset Driver" if COMPILE_TEST
+	default ARCH_GEMINI
+	select MFD_SYSCON
+	help
+	  This enables the reset controller driver for Cortina Systems Gemini.
+
 config RESET_IMX7
 	bool "i.MX7 Reset Driver" if COMPILE_TEST
 	default SOC_IMX7D
@@ -80,7 +87,7 @@ config RESET_SUNXI
 	help
 	  This enables the reset driver for Allwinner SoCs.
 
-config TI_SYSCON_RESET
+config RESET_TI_SYSCON
 	tristate "TI SYSCON Reset Driver"
 	depends on HAS_IOMEM
 	select MFD_SYSCON

drivers/reset/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_GEMINI) += reset-gemini.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
@@ -13,7 +14,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_STM32) += reset-stm32.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
-obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
+obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o

drivers/reset/reset-gemini.c

+/*
+ * Cortina Gemini Reset controller driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+
+/**
+ * struct gemini_reset - gemini reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct gemini_reset {
+	struct regmap *map;
+	struct reset_controller_dev rcdev;
+};
+
+#define GEMINI_GLOBAL_SOFT_RESET 0x0c
+
+#define to_gemini_reset(p) \
+	container_of((p), struct gemini_reset, rcdev)
+
+/*
+ * This is a self-deasserting reset controller.
+ */
+static int gemini_reset(struct reset_controller_dev *rcdev,
+			unsigned long id)
+{
+	struct gemini_reset *gr = to_gemini_reset(rcdev);
+
+	/* Manual says to always set BIT 30 (CPU1) to 1 */
+	return regmap_write(gr->map,
+			    GEMINI_GLOBAL_SOFT_RESET,
+			    BIT(GEMINI_RESET_CPU1) | BIT(id));
+}
+
+static int gemini_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct gemini_reset *gr = to_gemini_reset(rcdev);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(gr->map, GEMINI_GLOBAL_SOFT_RESET, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(id));
+}
+
+static const struct reset_control_ops gemini_reset_ops = {
+	.reset = gemini_reset,
+	.status = gemini_reset_status,
+};
+
+static int gemini_reset_probe(struct platform_device *pdev)
+{
+	struct gemini_reset *gr;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	gr = devm_kzalloc(dev, sizeof(*gr), GFP_KERNEL);
+	if (!gr)
+		return -ENOMEM;
+
+	gr->map = syscon_node_to_regmap(np);
+	if (IS_ERR(gr->map)) {
+		ret = PTR_ERR(gr->map);
+		dev_err(dev, "unable to get regmap (%d)", ret);
+		return ret;
+	}
+	gr->rcdev.owner = THIS_MODULE;
+	gr->rcdev.nr_resets = 32;
+	gr->rcdev.ops = &gemini_reset_ops;
+	gr->rcdev.of_node = pdev->dev.of_node;
+
+	ret = devm_reset_controller_register(&pdev->dev, &gr->rcdev);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "registered Gemini reset controller\n");
+	return 0;
+}
+
+static const struct of_device_id gemini_reset_dt_ids[] = {
+	{ .compatible = "cortina,gemini-syscon", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver gemini_reset_driver = {
+	.probe	= gemini_reset_probe,
+	.driver = {
+		.name		= "gemini-reset",
+		.of_match_table	= gemini_reset_dt_ids,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(gemini_reset_driver);

drivers/reset/sti/reset-syscfg.c

@@ -145,16 +145,14 @@ static int syscfg_reset_controller_register(struct device *dev,
 				const struct syscfg_reset_controller_data *data)
 {
 	struct syscfg_reset_controller *rc;
-	size_t size;
 	int i, err;
 
 	rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
 	if (!rc)
 		return -ENOMEM;
 
-	size = sizeof(struct syscfg_reset_channel) * data->nr_channels;
-
-	rc->channels = devm_kzalloc(dev, size, GFP_KERNEL);
+	rc->channels = devm_kcalloc(dev, data->nr_channels,
+				    sizeof(*rc->channels), GFP_KERNEL);
 	if (!rc->channels)
 		return -ENOMEM;
 

include/dt-bindings/reset/cortina,gemini-reset.h

+#ifndef _DT_BINDINGS_RESET_CORTINA_GEMINI_H
+#define _DT_BINDINGS_RESET_CORTINA_GEMINI_H
+
+#define GEMINI_RESET_DRAM	0
+#define GEMINI_RESET_FLASH	1
+#define GEMINI_RESET_IDE	2
+#define GEMINI_RESET_RAID	3
+#define GEMINI_RESET_SECURITY	4
+#define GEMINI_RESET_GMAC0	5
+#define GEMINI_RESET_GMAC1	6
+#define GEMINI_RESET_PCI	7
+#define GEMINI_RESET_USB0	8
+#define GEMINI_RESET_USB1	9
+#define GEMINI_RESET_DMAC	10
+#define GEMINI_RESET_APB	11
+#define GEMINI_RESET_LPC	12
+#define GEMINI_RESET_LCD	13
+#define GEMINI_RESET_INTCON0	14
+#define GEMINI_RESET_INTCON1	15
+#define GEMINI_RESET_RTC	16
+#define GEMINI_RESET_TIMER	17
+#define GEMINI_RESET_UART	18
+#define GEMINI_RESET_SSP	19
+#define GEMINI_RESET_GPIO0	20
+#define GEMINI_RESET_GPIO1	21
+#define GEMINI_RESET_GPIO2	22
+#define GEMINI_RESET_WDOG	23
+#define GEMINI_RESET_EXTERN	24
+#define GEMINI_RESET_CIR	25
+#define GEMINI_RESET_SATA0	26
+#define GEMINI_RESET_SATA1	27
+#define GEMINI_RESET_TVC	28
+#define GEMINI_RESET_CPU1	30
+#define GEMINI_RESET_GLOBAL	31
+
+#endif