Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Cobalt: update defconfig
  [MIPS] kgdb: add arch support for the kernel's kgdb core
  [MIPS] kgdb: Remove existing implementation
  [MIPS] TXx9: Kconfig cleanup
  [MIPS] TXx9: Kill unused txx927.h
  [MIPS] TXx9: Support early_printk
  [MIPS] TXx9: Unify serial_txx9 setup
  [MIPS] TXx9: Random cleanup
  [MIPS] TXx9: Make tx4938-specific code more independent
  [MIPS] TXx9: Make tx3927-specific code more independent
  [MIPS] TXx9: Cleanup watchdog
  [MIPS] TXx9: Cleanup restart/halt/power_off
  [MIPS] TXx9: PCI error handling
  [MIPS] TXx9: Add some pci options
  [MIPS] Introduce pcibios_plat_setup
  [MIPS] TXx9: PCI fixes for tx3927/tx4927
  [MIPS] TXx9: Fix JMR3927 irq numbers
  [MIPS] RB532: Flags are unsigned long
  [MIPS] Initialization of Alchemy boards
  [MIPS] tlb-r4k: Nuke broken paranoia error test.

arch/mips/Kconfig

@@ -3,6 +3,7 @@ config MIPS
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
@@ -280,7 +280,6 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -306,7 +305,6 @@ config PMC_YOSEMITE
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -359,7 +357,6 @@ config SGI_IP27
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -475,7 +472,6 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
 
@@ -868,7 +864,6 @@ config SOC_PNX8550
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select SYS_SUPPORTS_KGDB
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE

arch/mips/Kconfig.debug

@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
 	  arch/mips/kernel/smtc.c.  This debugging option result in significant
 	  overhead so should be disabled in production kernels.
 
-config KGDB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-	select DEBUG_INFO
-	help
-	  If you say Y here, it will be possible to remotely debug the MIPS
-	  kernel using gdb. This enlarges your kernel image disk size by
-	  several megabytes and requires a machine with more than 16 MB,
-	  better 32 MB RAM to avoid excessive linking time. This is only
-	  useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-	bool
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on KGDB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC

arch/mips/au1000/Kconfig

@@ -134,4 +134,3 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select SYS_SUPPORTS_KGDB

arch/mips/au1000/common/Makefile

@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/au1000/common/dbg_io.c

-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-		UART16550_WRITE(UART_MOD_CNTRL, 3);
-	calc_clock();
-
-	/* disable interrupts */
-	UART16550_WRITE(UART_IER, 0);
-
-	/* set up baud rate */
-	{
-		u32 divisor;
-
-		/* set divisor */
-		divisor = get_au1x00_uart_baud_base() / baud;
-		UART16550_WRITE(UART_CLK, divisor & 0xffff);
-	}
-
-	/* set data format */
-	UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-	return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-	UART16550_WRITE(UART_TX, byte);
-
-	return 1;
-}
-
-#endif

arch/mips/au1000/db1x00/init.c

@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/mtx-1/init.c

@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/pb1000/init.c

@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/pb1100/init.c

@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/pb1200/init.c

@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/pb1500/init.c

@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/pb1550/init.c

@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/au1000/xxs1500/init.c

@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }

arch/mips/basler/excite/Makefile

@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
 				   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
 obj-m				+= excite_iodev.o

arch/mips/basler/excite/excite_dbg_io.c

-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK		25000000
-#define BASE_BAUD		(UART_CLK / 16)
-#define REGISTER_BASE_0		0x0208UL
-#define REGISTER_BASE_1		0x0238UL
-
-#define REGISTER_BASE_DBG	REGISTER_BASE_1
-
-#define CPRR	0x0004
-#define UACFG	0x0200
-#define UAINTS	0x0204
-#define UARBR	(REGISTER_BASE_DBG + 0x0000)
-#define UATHR	(REGISTER_BASE_DBG + 0x0004)
-#define UADLL	(REGISTER_BASE_DBG + 0x0008)
-#define UAIER	(REGISTER_BASE_DBG + 0x000c)
-#define UADLH	(REGISTER_BASE_DBG + 0x0010)
-#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
-#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
-#define UALCR	(REGISTER_BASE_DBG + 0x001c)
-#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
-#define UALSR	(REGISTER_BASE_DBG + 0x0024)
-#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
-#define UASCR	(REGISTER_BASE_DBG + 0x002c)
-
-#define	PARITY_NONE	0
-#define	PARITY_ODD	0x08
-#define	PARITY_EVEN	0x18
-#define	PARITY_MARK	0x28
-#define	PARITY_SPACE	0x38
-
-#define	DATA_5BIT	0x0
-#define	DATA_6BIT	0x1
-#define	DATA_7BIT	0x2
-#define	DATA_8BIT	0x3
-
-#define	STOP_1BIT	0x0
-#define	STOP_2BIT	0x4
-
-#define BAUD_DBG	57600
-#define	PARITY_DBG	PARITY_NONE
-#define	DATA_DBG	DATA_8BIT
-#define	STOP_DBG	STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-	const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-	/* Take the UART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-	titan_writel(0x00000000, UACFG);
-	titan_writel(0x00000002, UACFG);
-
-	titan_writel(0x0, UALCR);
-	titan_writel(0x0, UAIER);
-
-	/* Disable FIFOs */
-	titan_writel(0x00, UAFCR);
-
-	titan_writel(0x80, UALCR);
-	titan_writel(divisor & 0xff, UADLL);
-	titan_writel((divisor & 0xff00) >> 8, UADLH);
-	titan_writel(0x0, UALCR);
-
-	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-	/* Enable receiver interrupt */
-	titan_readl(UARBR);
-	titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-	while (!(titan_readl(UALSR) & 0x1));
-	return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-	while (!(titan_readl(UALSR) & 0x20));
-	titan_writel(data, UATHR);
-	return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-	if (unlikely(
-		((titan_readl(UAIIR) & 0x7) == 4)
-		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
-			set_async_breakpoint(&regs->cp0_epc);
-}

arch/mips/basler/excite/excite_irq.c

@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-	excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
 	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
 	if ((pending & (1 << TITAN_IRQ)) && msgint) {
 		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-		excite_kgdb_inthdl();
-#endif
 		do_IRQ(TITAN_IRQ);
 		return;
 	}

arch/mips/basler/excite/excite_setup.c

@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
 	/* Take the DUART out of reset */
 	titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
 	/* Enable both ports */
 	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
 	/* Enable port #0 only */
 	titan_writel(MASK_SER0, UACFG);
-#endif	/* defined(CONFIG_KGDB) */
+#endif
 
  	/*
 	 * Set up serial port #0. Do not use autodetection; the result is

arch/mips/configs/cobalt_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,9 +10,11 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SIM is not set
@@ -24,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -34,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -108,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -115,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -151,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -177,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -207,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -232,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -250,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -269,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -276,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -294,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -305,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -326,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -337,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -350,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -384,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -423,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -462,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -475,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -504,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -518,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -562,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -572,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -580,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -588,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -607,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -642,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -664,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -743,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -751,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -773,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -785,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -793,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -800,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -833,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -858,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -882,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -892,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -923,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -967,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -983,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1022,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1057,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set

arch/mips/configs/db1000_defconfig

@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/db1100_defconfig

@@ -1092,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/db1200_defconfig

@@ -1174,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/db1500_defconfig

@@ -1392,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/db1550_defconfig

@@ -1209,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/excite_defconfig

@@ -1269,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/ip27_defconfig

@@ -943,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/msp71xx_defconfig

@@ -1415,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 

arch/mips/configs/mtx1_defconfig

@@ -3020,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/pb1100_defconfig

@@ -1085,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/pb1500_defconfig

@@ -1202,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/pb1550_defconfig

@@ -1195,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/pnx8550-jbs_defconfig

@@ -1216,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #

arch/mips/configs/pnx8550-stb810_defconfig

@@ -1206,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #

arch/mips/configs/rbtx49xx_defconfig

@@ -742,7 +742,6 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options

arch/mips/configs/sb1250-swarm_defconfig

@@ -963,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #

arch/mips/configs/yosemite_defconfig

@@ -827,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #

arch/mips/emma2rh/markeins/platform.c

@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 

arch/mips/emma2rh/markeins/setup.c

@@ -41,7 +41,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 

arch/mips/kernel/Makefile

@@ -71,7 +71,7 @@ obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o

arch/mips/kernel/gdb-low.S

-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0	mfc0
-#define DMTC0	mtc0
-#define LDC1	lwc1
-#define SDC1	lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0	dmfc0
-#define DMTC0	dmtc0
-#define LDC1	ldc1
-#define SDC1	ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-		.align 	5
-		NESTED(trap_low, GDB_FR_SIZE, sp)
-		.set	noat
-		.set 	noreorder
-
-		mfc0	k0, CP0_STATUS
-		sll	k0, 3     		/* extract cu0 bit */
-		bltz	k0, 1f
-		move	k1, sp
-
-		/*
-		 * Called from user mode, go somewhere else.
-		 */
-		mfc0	k0, CP0_CAUSE
-		andi	k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-		dsll	k0, k0, 1
-#endif
-		PTR_L	k1, saved_vectors(k0)
-		jr	k1
-		nop
-1:
-		move	k0, sp
-		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
-		LONG_S	k0, GDB_FR_REG29(sp)
-		LONG_S	$2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-		mfc0	v0, CP0_STATUS
-		LONG_S	v0, GDB_FR_STATUS(sp)
-		mfc0	v0, CP0_CAUSE
-		LONG_S	v0, GDB_FR_CAUSE(sp)
-		DMFC0	v0, CP0_EPC
-		LONG_S	v0, GDB_FR_EPC(sp)
-		DMFC0	v0, CP0_BADVADDR
-		LONG_S	v0, GDB_FR_BADVADDR(sp)
-		mfhi	v0
-		LONG_S	v0, GDB_FR_HI(sp)
-		mflo	v0
-		LONG_S	v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-		LONG_S	zero, GDB_FR_REG0(sp)		/* I know... */
-		LONG_S	$1, GDB_FR_REG1(sp)
-		/* v0 already saved */
-		LONG_S	$3, GDB_FR_REG3(sp)
-		LONG_S	$4, GDB_FR_REG4(sp)
-		LONG_S	$5, GDB_FR_REG5(sp)
-		LONG_S	$6, GDB_FR_REG6(sp)
-		LONG_S	$7, GDB_FR_REG7(sp)
-		LONG_S	$8, GDB_FR_REG8(sp)
-		LONG_S	$9, GDB_FR_REG9(sp)
-		LONG_S	$10, GDB_FR_REG10(sp)
-		LONG_S	$11, GDB_FR_REG11(sp)
-		LONG_S	$12, GDB_FR_REG12(sp)
-		LONG_S	$13, GDB_FR_REG13(sp)
-		LONG_S	$14, GDB_FR_REG14(sp)
-		LONG_S	$15, GDB_FR_REG15(sp)
-		LONG_S	$16, GDB_FR_REG16(sp)
-		LONG_S	$17, GDB_FR_REG17(sp)
-		LONG_S	$18, GDB_FR_REG18(sp)
-		LONG_S	$19, GDB_FR_REG19(sp)
-		LONG_S	$20, GDB_FR_REG20(sp)
-		LONG_S	$21, GDB_FR_REG21(sp)
-		LONG_S	$22, GDB_FR_REG22(sp)
-		LONG_S	$23, GDB_FR_REG23(sp)
-		LONG_S	$24, GDB_FR_REG24(sp)
-		LONG_S	$25, GDB_FR_REG25(sp)
-		LONG_S	$26, GDB_FR_REG26(sp)
-		LONG_S	$27, GDB_FR_REG27(sp)
-		LONG_S	$28, GDB_FR_REG28(sp)
-		/* sp already saved */
-		LONG_S	$30, GDB_FR_REG30(sp)
-		LONG_S	$31, GDB_FR_REG31(sp)
-
-		CLI				/* disable interrupts */
-		TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* FPU enabled? */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0,2f			/* disabled, skip */
-		 nop
-
-		SDC1	$0, GDB_FR_FPR0(sp)
-		SDC1	$1, GDB_FR_FPR1(sp)
-		SDC1	$2, GDB_FR_FPR2(sp)
-		SDC1	$3, GDB_FR_FPR3(sp)
-		SDC1	$4, GDB_FR_FPR4(sp)
-		SDC1	$5, GDB_FR_FPR5(sp)
-		SDC1	$6, GDB_FR_FPR6(sp)
-		SDC1	$7, GDB_FR_FPR7(sp)
-		SDC1	$8, GDB_FR_FPR8(sp)
-		SDC1	$9, GDB_FR_FPR9(sp)
-		SDC1	$10, GDB_FR_FPR10(sp)
-		SDC1	$11, GDB_FR_FPR11(sp)
-		SDC1	$12, GDB_FR_FPR12(sp)
-		SDC1	$13, GDB_FR_FPR13(sp)
-		SDC1	$14, GDB_FR_FPR14(sp)
-		SDC1	$15, GDB_FR_FPR15(sp)
-		SDC1	$16, GDB_FR_FPR16(sp)
-		SDC1	$17, GDB_FR_FPR17(sp)
-		SDC1	$18, GDB_FR_FPR18(sp)
-		SDC1	$19, GDB_FR_FPR19(sp)
-		SDC1	$20, GDB_FR_FPR20(sp)
-		SDC1	$21, GDB_FR_FPR21(sp)
-		SDC1	$22, GDB_FR_FPR22(sp)
-		SDC1	$23, GDB_FR_FPR23(sp)
-		SDC1	$24, GDB_FR_FPR24(sp)
-		SDC1	$25, GDB_FR_FPR25(sp)
-		SDC1	$26, GDB_FR_FPR26(sp)
-		SDC1	$27, GDB_FR_FPR27(sp)
-		SDC1	$28, GDB_FR_FPR28(sp)
-		SDC1	$29, GDB_FR_FPR29(sp)
-		SDC1	$30, GDB_FR_FPR30(sp)
-		SDC1	$31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-		cfc1	v0, CP1_STATUS
-		LONG_S	v0, GDB_FR_FSR(sp)
-		cfc1	v0, CP1_REVISION
-		LONG_S	v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-		LONG_S	sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-		mfc0	v0, CP0_INDEX
-		LONG_S	v0, GDB_FR_CP0_INDEX(sp)
-		mfc0	v0, CP0_RANDOM
-		LONG_S	v0, GDB_FR_CP0_RANDOM(sp)
-		DMFC0	v0, CP0_ENTRYLO0
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		DMFC0	v0, CP0_ENTRYLO1
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO1(sp)
-		DMFC0	v0, CP0_CONTEXT
-		LONG_S	v0, GDB_FR_CP0_CONTEXT(sp)
-		mfc0	v0, CP0_PAGEMASK
-		LONG_S	v0, GDB_FR_CP0_PAGEMASK(sp)
-		mfc0	v0, CP0_WIRED
-		LONG_S	v0, GDB_FR_CP0_WIRED(sp)
-		DMFC0	v0, CP0_ENTRYHI
-		LONG_S	v0, GDB_FR_CP0_ENTRYHI(sp)
-		mfc0	v0, CP0_PRID
-		LONG_S	v0, GDB_FR_CP0_PRID(sp)
-
-		.set	at
-
-/*
- * Continue with the higher level handler
- */
-
-		move	a0,sp
-
-		jal	handle_exception
-		 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-		.set	noat
-
-		LONG_L	v0, GDB_FR_CP0_ENTRYHI(sp)
-		LONG_L	v1, GDB_FR_CP0_WIRED(sp)
-		DMTC0	v0, CP0_ENTRYHI
-		mtc0	v1, CP0_WIRED
-		LONG_L	v0, GDB_FR_CP0_PAGEMASK(sp)
-		LONG_L	v1, GDB_FR_CP0_ENTRYLO1(sp)
-		mtc0	v0, CP0_PAGEMASK
-		DMTC0	v1, CP0_ENTRYLO1
-		LONG_L	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		LONG_L	v1, GDB_FR_CP0_INDEX(sp)
-		DMTC0	v0, CP0_ENTRYLO0
-		LONG_L	v0, GDB_FR_CP0_CONTEXT(sp)
-		mtc0	v1, CP0_INDEX
-		DMTC0	v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* check if the FPU is enabled */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0, 3f			/* disabled, skip */
-		 nop
-
-		LDC1	$31, GDB_FR_FPR31(sp)
-		LDC1	$30, GDB_FR_FPR30(sp)
-		LDC1	$29, GDB_FR_FPR29(sp)
-		LDC1	$28, GDB_FR_FPR28(sp)
-		LDC1	$27, GDB_FR_FPR27(sp)
-		LDC1	$26, GDB_FR_FPR26(sp)
-		LDC1	$25, GDB_FR_FPR25(sp)
-		LDC1	$24, GDB_FR_FPR24(sp)
-		LDC1	$23, GDB_FR_FPR23(sp)
-		LDC1	$22, GDB_FR_FPR22(sp)
-		LDC1	$21, GDB_FR_FPR21(sp)
-		LDC1	$20, GDB_FR_FPR20(sp)
-		LDC1	$19, GDB_FR_FPR19(sp)
-		LDC1	$18, GDB_FR_FPR18(sp)
-		LDC1	$17, GDB_FR_FPR17(sp)
-		LDC1	$16, GDB_FR_FPR16(sp)
-		LDC1	$15, GDB_FR_FPR15(sp)
-		LDC1	$14, GDB_FR_FPR14(sp)
-		LDC1	$13, GDB_FR_FPR13(sp)
-		LDC1	$12, GDB_FR_FPR12(sp)
-		LDC1	$11, GDB_FR_FPR11(sp)
-		LDC1	$10, GDB_FR_FPR10(sp)
-		LDC1	$9, GDB_FR_FPR9(sp)
-		LDC1	$8, GDB_FR_FPR8(sp)
-		LDC1	$7, GDB_FR_FPR7(sp)
-		LDC1	$6, GDB_FR_FPR6(sp)
-		LDC1	$5, GDB_FR_FPR5(sp)
-		LDC1	$4, GDB_FR_FPR4(sp)
-		LDC1	$3, GDB_FR_FPR3(sp)
-		LDC1	$2, GDB_FR_FPR2(sp)
-		LDC1	$1, GDB_FR_FPR1(sp)
-		LDC1	$0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Read-modify write of Status must be atomic */
-		mfc0	t2, CP0_TCSTATUS
-		ori	t1, t2, TCSTATUS_IXMT
-		mtc0	t1, CP0_TCSTATUS
-		andi	t2, t2, TCSTATUS_IXMT
-		_ehb
-		DMT	9				# dmt	t1
-		jal	mips_ihb
-		nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-		mfc0	t0, CP0_STATUS
-		ori	t0, 0x1f
-		xori	t0, 0x1f
-		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-        	andi    t1, t1, VPECONTROL_TE
-        	beqz    t1, 9f
-		nop
-        	EMT					# emt
-9:
-		mfc0	t1, CP0_TCSTATUS
-		xori	t1, t1, TCSTATUS_IXMT
-		or	t1, t1, t2
-		mtc0	t1, CP0_TCSTATUS
-		_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-		LONG_L	v0, GDB_FR_STATUS(sp)
-		LONG_L	v1, GDB_FR_EPC(sp)
-		mtc0	v0, CP0_STATUS
-		DMTC0	v1, CP0_EPC
-		LONG_L	v0, GDB_FR_HI(sp)
-		LONG_L	v1, GDB_FR_LO(sp)
-		mthi	v0
-		mtlo	v1
-		LONG_L	$31, GDB_FR_REG31(sp)
-		LONG_L	$30, GDB_FR_REG30(sp)
-		LONG_L	$28, GDB_FR_REG28(sp)
-		LONG_L	$27, GDB_FR_REG27(sp)
-		LONG_L	$26, GDB_FR_REG26(sp)
-		LONG_L	$25, GDB_FR_REG25(sp)
-		LONG_L	$24, GDB_FR_REG24(sp)
-		LONG_L	$23, GDB_FR_REG23(sp)
-		LONG_L	$22, GDB_FR_REG22(sp)
-		LONG_L	$21, GDB_FR_REG21(sp)
-		LONG_L	$20, GDB_FR_REG20(sp)
-		LONG_L	$19, GDB_FR_REG19(sp)
-		LONG_L	$18, GDB_FR_REG18(sp)
-		LONG_L	$17, GDB_FR_REG17(sp)
-		LONG_L	$16, GDB_FR_REG16(sp)
-		LONG_L	$15, GDB_FR_REG15(sp)
-		LONG_L	$14, GDB_FR_REG14(sp)
-		LONG_L	$13, GDB_FR_REG13(sp)
-		LONG_L	$12, GDB_FR_REG12(sp)
-		LONG_L	$11, GDB_FR_REG11(sp)
-		LONG_L	$10, GDB_FR_REG10(sp)
-		LONG_L	$9, GDB_FR_REG9(sp)
-		LONG_L	$8, GDB_FR_REG8(sp)
-		LONG_L	$7, GDB_FR_REG7(sp)
-		LONG_L	$6, GDB_FR_REG6(sp)
-		LONG_L	$5, GDB_FR_REG5(sp)
-		LONG_L	$4, GDB_FR_REG4(sp)
-		LONG_L	$3, GDB_FR_REG3(sp)
-		LONG_L	$2, GDB_FR_REG2(sp)
-		LONG_L	$1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-		LONG_L	k0, GDB_FR_EPC(sp)
-		LONG_L	$29, GDB_FR_REG29(sp)		/* Deallocate stack */
-		jr	k0
-		rfe
-#else
-		LONG_L	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
-
-		.set	mips3
-		eret
-		.set	mips0
-#endif
-		.set	at
-		.set	reorder
-		END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:		lb	t0, (a0)
-		sb	t0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	4b, kgdbfault
-		.previous
-		END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:		sb	a0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	5b, kgdbfault
-		.previous
-		END(kgdb_write_byte)
-
-		.type	kgdbfault@function
-		.ent	kgdbfault
-
-kgdbfault:	li	v0, -EFAULT
-		jr	ra
-		.end	kgdbfault

arch/mips/kernel/gdb-stub.c

-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;	/* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/*
-		 * wait around for the start character,
-		 * ignore all other characters
-		 */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found
-		 */
-		while (count < BUFMAX) {
-			ch = getDebugChar();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-
-				/*
-				 * if a sequence char is present,
-				 * reply the sequence ID
-				 */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-
-					/*
-					 * remove sequence chars from buffer
-					 */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	}
-	while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count]) != 0) {
-			if (!(putDebugChar(ch)))
-				return;
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-
-	}
-	while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-	unsigned char ch;
-
-	while (count-- > 0) {
-		if (kgdb_read_byte(mem++, &ch) != 0)
-			return 0;
-		*buf++ = hexchars[ch >> 4];
-		*buf++ = hexchars[ch & 0xf];
-	}
-
-	*buf = 0;
-
-	return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-	int i;
-	unsigned char ch;
-
-	for (i=0; i<count; i++)
-	{
-		if (binary) {
-			ch = *buf++;
-			if (ch == 0x7d)
-				ch = 0x20 ^ *buf++;
-		}
-		else {
-			ch = hex(*buf++) << 4;
-			ch |= hex(*buf++);
-		}
-		if (kgdb_write_byte(ch, mem++) != 0)
-			return 0;
-	}
-
-	return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-	unsigned char tt;		/* Trap type code for MIPS R3xxx and R4xxx */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-	{ 6, SIGBUS },			/* instruction bus error */
-	{ 7, SIGBUS },			/* data bus error */
-	{ 9, SIGTRAP },			/* break */
-	{ 10, SIGILL },			/* reserved instruction */
-/*	{ 11, SIGILL },		*/	/* CPU unusable */
-	{ 12, SIGFPE },			/* overflow */
-	{ 13, SIGTRAP },		/* trap */
-	{ 14, SIGSEGV },		/* virtual instruction cache coherency */
-	{ 15, SIGFPE },			/* floating point exception */
-	{ 23, SIGSEGV },		/* watch */
-	{ 31, SIGSEGV },		/* virtual data cache coherency */
-	{ 0, 0}				/* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-	unsigned char c;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-	putDebugChar('+'); /* 'hello world' */
-	/*
-	 * In case GDB is started before us, ack any packets
-	 * (presumably "$?#xx") sitting there.
-	 */
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-
-	initialized = 1;
-	local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		set_except_vector(ht->tt, saved_vectors[ht->tt]);
-	local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP;		/* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*intValue = (*intValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*longValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*longValue = (*longValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-	/*
-	 * Saved main processor registers
-	 */
-	printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-	       regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-	       regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-	       regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-	printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-	       regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-	/*
-	 * Saved cp0 registers
-	 */
-	printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-	       regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-	unsigned long addr;
-	unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-	union mips_instruction insn;
-	unsigned long targ;
-	int is_branch, is_cond, i;
-
-	targ = regs->cp0_epc;
-	insn.word = *(unsigned int *)targ;
-	is_branch = is_cond = 0;
-
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			targ = *(&regs->reg0 + insn.r_format.rs);
-			is_branch = 1;
-			break;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-		is_branch = 1;
-		targ += 4;
-		targ >>= 28;
-		targ <<= 28;
-		targ |= (insn.j_format.target << 2);
-		break;
-
-	/*
-	 * These are conditional.
-	 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-	case cop0_op:
-	case cop1_op:
-	case cop2_op:
-	case cop1x_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-	}
-
-	if (is_branch) {
-		i = 0;
-		if (is_cond && targ != (regs->cp0_epc + 8)) {
-			step_bp[i].addr = regs->cp0_epc + 8;
-			step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-			*(unsigned *)(regs->cp0_epc + 8) = BP;
-		}
-		step_bp[i].addr = targ;
-		step_bp[i].val  = *(unsigned *)targ;
-		*(unsigned *)targ = BP;
-	} else {
-		step_bp[0].addr = regs->cp0_epc + 4;
-		step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-		*(unsigned *)(regs->cp0_epc + 4) = BP;
-	}
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-	/* skip breaking into userland */
-	if ((*epc & 0x80000000) == 0)
-		return;
-
-#ifdef CONFIG_SMP
-	/* avoid deadlock if someone is make IPC */
-	if (spin_is_locked(&smp_call_lock))
-		return;
-#endif
-
-	async_bp.addr = *epc;
-	*epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-	unsigned flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	__raw_spin_lock(&kgdb_cpulock[cpu]);
-	__raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-	local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-	cpumask_t mask = cpu_online_map;
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	if (spin_is_locked(&smp_call_lock)) {
-		/*
-		 * Some other processor is trying to make us do something
-		 * but we're not going to respond... give up
-		 */
-		return -1;
-		}
-
-	/*
-	 * We will continue here, accepting the fact that
-	 * the kernel may deadlock if another CPU attempts
-	 * to call smp_call_function now...
-	 */
-
-	data.func = kgdb_wait;
-	data.info = NULL;
-	atomic_set(&data.started, 0);
-	data.wait = 0;
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	mb();
-
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-#endif
-
-	return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-	int trap;			/* Trap type */
-	int sigval;
-	long addr;
-	int length;
-	char *ptr;
-	unsigned long *stack;
-	int i;
-	int bflag = 0;
-
-	kgdb_started = 1;
-
-	/*
-	 * acquire the big kgdb spinlock
-	 */
-	if (!spin_trylock(&kgdb_lock)) {
-		/*
-		 * some other CPU has the lock, we should go back to
-		 * receive the gdb_wait IPC
-		 */
-		return;
-	}
-
-	/*
-	 * If we're in async_breakpoint(), restore the real EPC from
-	 * the breakpoint.
-	 */
-	if (regs->cp0_epc == (unsigned long)async_breakinst) {
-		regs->cp0_epc = async_bp.addr;
-		async_bp.addr = 0;
-	}
-
-	/*
-	 * acquire the CPU spinlocks
-	 */
-	for_each_online_cpu(i)
-		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-			panic("kgdb: couldn't get cpulock %d\n", i);
-
-	/*
-	 * force other cpus to enter kgdb
-	 */
-	kgdb_smp_call_kgdb_wait();
-
-	/*
-	 * If we're in breakpoint() increment the PC
-	 */
-	trap = (regs->cp0_cause & 0x7c) >> 2;
-	if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-		regs->cp0_epc += 4;
-
-	/*
-	 * If we were single_stepping, restore the opcodes hoisted
-	 * for the breakpoint[s].
-	 */
-	if (step_bp[0].addr) {
-		*(unsigned *)step_bp[0].addr = step_bp[0].val;
-		step_bp[0].addr = 0;
-
-		if (step_bp[1].addr) {
-			*(unsigned *)step_bp[1].addr = step_bp[1].val;
-			step_bp[1].addr = 0;
-		}
-	}
-
-	stack = (long *)regs->reg29;			/* stack ptr */
-	sigval = computeSignal(trap);
-
-	/*
-	 * reply to host that an exception has occurred
-	 */
-	ptr = output_buffer;
-
-	/*
-	 * Send trap type (converted to signal)
-	 */
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-
-	/*
-	 * Send Error PC
-	 */
-	*ptr++ = hexchars[REG_EPC >> 4];
-	*ptr++ = hexchars[REG_EPC & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send frame pointer
-	 */
-	*ptr++ = hexchars[REG_FP >> 4];
-	*ptr++ = hexchars[REG_FP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send stack pointer
-	 */
-	*ptr++ = hexchars[REG_SP >> 4];
-	*ptr++ = hexchars[REG_SP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	*ptr++ = 0;
-	putpacket(output_buffer);	/* send it off... */
-
-	/*
-	 * Wait for input from remote GDB
-	 */
-	while (1) {
-		output_buffer[0] = 0;
-		getpacket(input_buffer);
-
-		switch (input_buffer[0])
-		{
-		case '?':
-			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
-			output_buffer[3] = 0;
-			break;
-
-		/*
-		 * Detach debugger; let CPU run
-		 */
-		case 'D':
-			putpacket(output_buffer);
-			goto finish_kgdb;
-			break;
-
-		case 'd':
-			/* toggle debug flag */
-			break;
-
-		/*
-		 * Return the value of the CPU registers
-		 */
-		case 'g':
-			ptr = output_buffer;
-			ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-			ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-			ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-			ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-			ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-			ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-			break;
-
-		/*
-		 * set the value of the CPU registers - return OK
-		 */
-		case 'G':
-		{
-			ptr = &input_buffer[1];
-			hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-			ptr += 6*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-			strcpy(output_buffer, "OK");
-		 }
-		break;
-
-		/*
-		 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-		 */
-		case 'm':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, output_buffer, length, 1))
-					break;
-				strcpy(output_buffer, "E03");
-			} else
-				strcpy(output_buffer, "E01");
-			break;
-
-		/*
-		 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-		 */
-		case 'X':
-			bflag = 1;
-			/* fall through */
-
-		/*
-		 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-		 */
-		case 'M':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)
-				&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-					strcpy(output_buffer, "OK");
-				else
-					strcpy(output_buffer, "E03");
-			}
-			else
-				strcpy(output_buffer, "E02");
-			break;
-
-		/*
-		 * cAA..AA    Continue at address AA..AA(optional)
-		 */
-		case 'c':
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &input_buffer[1];
-			if (hexToLong(&ptr, &addr))
-				regs->cp0_epc = addr;
-
-			goto exit_kgdb_exception;
-			break;
-
-		/*
-		 * kill the program; let us try to restart the machine
-		 * Reset the whole machine.
-		 */
-		case 'k':
-		case 'r':
-			machine_restart("kgdb restarts machine");
-			break;
-
-		/*
-		 * Step to next instruction
-		 */
-		case 's':
-			/*
-			 * There is no single step insn in the MIPS ISA, so we
-			 * use breakpoints and continue, instead.
-			 */
-			single_step(regs);
-			goto exit_kgdb_exception;
-			/* NOTREACHED */
-			break;
-
-		/*
-		 * Set baud rate (bBB)
-		 * FIXME: Needs to be written
-		 */
-		case 'b':
-		{
-#if 0
-			int baudrate;
-			extern void set_timer_3();
-
-			ptr = &input_buffer[1];
-			if (!hexToInt(&ptr, &baudrate))
-			{
-				strcpy(output_buffer, "B01");
-				break;
-			}
-
-			/* Convert baud rate to uart clock divider */
-
-			switch (baudrate)
-			{
-				case 38400:
-					baudrate = 16;
-					break;
-				case 19200:
-					baudrate = 33;
-					break;
-				case 9600:
-					baudrate = 65;
-					break;
-				default:
-					baudrate = 0;
-					strcpy(output_buffer, "B02");
-					goto x1;
-			}
-
-			if (baudrate) {
-				putpacket("OK");	/* Ack before changing speed */
-				set_timer_3(baudrate); /* Set it */
-			}
-#endif
-		}
-		break;
-
-		}			/* switch */
-
-		/*
-		 * reply to the request
-		 */
-
-		putpacket(output_buffer);
-
-	} /* while */
-
-	return;
-
-finish_kgdb:
-	restore_debug_traps();
-
-exit_kgdb_exception:
-	/* release locks so other CPUs can go */
-	for_each_online_cpu(i)
-		__raw_spin_unlock(&kgdb_cpulock[i]);
-	spin_unlock(&kgdb_lock);
-
-	__flush_cache_all();
-	return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-	if (!initialized)
-		return;
-
-	__asm__ __volatile__(
-			".globl	breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-	__asm__ __volatile__(
-			".globl	async_breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"async_breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-void adel(void)
-{
-	__asm__ __volatile__(
-			".globl\tadel\n\t"
-			"lui\t$8,0x8000\n\t"
-			"lw\t$9,1($8)\n\t"
-			);
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-	return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-	kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-	char outbuf[18];
-
-	if (!kgdb_started)
-		return;
-
-	outbuf[0]='O';
-
-	while(l) {
-		int i = (l>8)?8:l;
-		mem2hex((char *)str, &outbuf[1], i, 0);
-		outbuf[(i*2)+1]=0;
-		putpacket(outbuf);
-		str += i;
-		l -= i;
-	}
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-	gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-	.name	= "gdb",
-	.write	= gdb_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1
-};
-
-static int __init register_gdb_console(void)
-{
-	register_console(&gdb_console);
-
-	return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif

arch/mips/kernel/irq.c

@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -126,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
 	atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
 	int i;
 
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_irq_noprobe(i);
 
 	arch_init_irq();
 
 #ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		printk("Wait for gdb client connection ...\n");
-		set_debug_traps();
-		breakpoint();
-	}
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
 #endif
 }

arch/mips/kernel/kgdb.c

+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL },	*/	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+
+	/* FP REGS */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	save_fp(current);
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	const u32 *ptr = (u32 *)gdb_regs;
+#else
+	const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		regs->regs[reg] = *(ptr++);
+
+	regs->cp0_status = *(ptr++);
+	regs->lo = *(ptr++);
+	regs->hi = *(ptr++);
+	regs->cp0_badvaddr = *(ptr++);
+	regs->cp0_cause = *(ptr++);
+	regs->cp0_epc = *(ptr++);
+
+	/* FP REGS from current */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	for (reg = 0; reg < 32; reg++)
+		current->thread.fpu.fpr[reg] = *(ptr++);
+	restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+	if (fixup_exception(regs))
+		return NOTIFY_DONE;
+
+	/* Userpace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		if (remcom_in_buffer[0] == 's')
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func   = break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}

arch/mips/kernel/traps.c

@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -425,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
 }
@@ -623,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -682,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
 	/*
 	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
 	 * insns, even for trap and break codes that indicate arithmetic
@@ -762,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
@@ -1537,6 +1553,11 @@ void __init trap_init(void)
 	extern char except_vec4;
 	unsigned long i;
 
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
+
 	if (cpu_has_veic || cpu_has_vint)
 		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
 	else

arch/mips/mm/tlb-r3k.c

@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
-		if (read_c0_wired() != w + 1) {
-			printk("[tlbwired] No WIRED reg?\n");
-			return;
-		}
 		write_c0_index(w << 8);
 		write_c0_pagemask(pagemask);
 		write_c0_entryhi(entryhi);

arch/mips/mti-malta/Makefile

@@ -13,7 +13,6 @@ obj-y				:= malta-amon.o malta-cmdline.o \
 
 obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
 obj-$(CONFIG_PCI)		+= malta-pci.o
-obj-$(CONFIG_KGDB)		+= malta-kgdb.o
 
 # FIXME FIXME FIXME
 obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o

arch/mips/mti-malta/malta-init.c

@@ -37,15 +37,6 @@
 
 #include <asm/mips-boards/malta.h>
 
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
 int prom_argc;
 int *_prom_argv, *_prom_envp;
 
@@ -173,51 +164,6 @@ static void __init console_config(void)
 }
 #endif
 
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-	extern int (*generic_putDebugChar)(char);
-	extern char (*generic_getDebugChar)(void);
-	char *argptr;
-	int line, speed;
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		argptr += strlen("kgdb=ttyS");
-		if (*argptr != '0' && *argptr != '1')
-			printk("KGDB: Unknown serial line /dev/ttyS%c, "
-			       "falling back to /dev/ttyS1\n", *argptr);
-		line = *argptr == '0' ? 0 : 1;
-		printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-		speed = 0;
-		if (*++argptr == ',')
-		{
-			int c;
-			while ((c = *++argptr) && ('0' <= c && c <= '9'))
-				speed = speed * 10 + c - '0';
-		}
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
-
-		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-		        "session, please connect your debugger\n",
-		        line ? 1 : 0, speed);
-
-		{
-			char *s;
-			for (s = "Please connect GDB to this port\r\n"; *s; )
-				generic_putDebugChar(*s++);
-		}
-
-		/* Breakpoint is invoked after interrupts are initialised */
-	}
-}
-#endif
-
 static void __init mips_nmi_setup(void)
 {
 	void *base;

arch/mips/mti-malta/malta-kgdb.c

-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-	SERIAL_PORT_DFNS	/* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				int value)
-{
-	outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-	int t;
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	if (kdb_port_info.flags & ASYNC_FOURPORT) {
-		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-		t = UART_MCR_DTR | UART_MCR_OUT1;
-	} else {
-		kdb_port_info.MCR
-			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-		t = UART_MCR_DTR | UART_MCR_RTS;
-	}
-
-	kdb_port_info.MCR = t;		/* no interrupts, please */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	if (speed == 0)
-		speed = 9600;
-
-	t = kdb_port_info.state->baud_base / speed;
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-	return speed;
-}
-
-int putDebugChar(char c)
-{
-	return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-	return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char rs_getDebugChar(void)
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return serial_in(&kdb_port_info, UART_RX);
-}

arch/mips/mti-malta/malta-setup.c

@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-
 #ifdef CONFIG_DMA_COHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");

arch/mips/nxp/pnx8550/common/Makefile

@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/nxp/pnx8550/common/gdb_hook.c

-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port  = tty_no;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-
-	/*
-	 * Now, initialize the UART
-	 */
-	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-	/* Wait until FIFO not full */
-	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-		;
-	/* Send one char */
-	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	char ch;
-
-	/* Wait until there is a char in the FIFO */
-	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-					IP3106_UART_FIFO_RXFIFO) >> 8))
-		;
-	/* Read one char */
-	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-		IP3106_UART_FIFO_RBRTHR;
-	/* Advance the RX FIFO read pointer */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-	return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}

arch/mips/nxp/pnx8550/common/int.c

@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 

arch/mips/nxp/pnx8550/common/proc.c

@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 

arch/mips/nxp/pnx8550/common/setup.c

@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
 		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 	}
 
-#ifdef CONFIG_KGDB
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		int line;
-		argptr += strlen("kgdb=ttyS");
-		line = *argptr == '0' ? 0 : 1;
-		rs_kgdb_hook(line);
-		pr_info("KGDB: Using ttyS%i for session, "
-		        "please connect your debugger\n", line ? 1 : 0);
-	}
-#endif
 	return;
 }

arch/mips/pci/ops-tx3927.c

@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-	unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-	if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-	                      ((dev_fn & 0xff) << 0x08) |
-	                      (where & 0xfc);
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	tx3927_pcicptr->ica =
+		((bus->number & 0xff) << 0x10) |
+		((devfn & 0xff) << 0x08) |
+		(where & 0xfc) | (bus->parent ? 1 : 0);
 
 	/* clear M_ABORT and Disable M_ABORT Int. */
 	tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 	tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 static inline int check_abort(void)
 {
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
 		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+		/* flush write buffer */
+		iob();
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	}
 	return PCIBIOS_SUCCESSFUL;
 }
 
 static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
 
 	switch (size) {
 	case 1:
@@ -97,11 +100,8 @@ static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
 	case 1:
@@ -117,11 +117,6 @@ static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		tx3927_pcicptr->icd = cpu_to_le32(val);
 	}
 
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return check_abort();
 }
 
@@ -202,3 +197,34 @@ void __init tx3927_pcic_setup(struct pci_controller *channel,
 		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
 	local_irq_restore(flags);
 }
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+		       regs->cp0_epc);
+		printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+		       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+		tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+		tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+			tx3927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX3927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}

arch/mips/pci/ops-tx4927.c

@@ -16,6 +16,8 @@
  * option) any later version.
  */
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
 #include <asm/txx9/tx4927pcic.h>
 
 static struct {
@@ -85,6 +87,8 @@ static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
 			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
 			     &pcicptr->pcistatus);
+		/* flush write buffer */
+		iob();
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
@@ -192,6 +196,28 @@ static struct {
 	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
 };
 
+char *__devinit tx4927_pcibios_setup(char *str)
+{
+	unsigned long val;
+
+	if (!strncmp(str, "trdyto=", 7)) {
+		if (strict_strtoul(str + 7, 0, &val) == 0)
+			tx4927_pci_opts.trdyto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "retryto=", 8)) {
+		if (strict_strtoul(str + 8, 0, &val) == 0)
+			tx4927_pci_opts.retryto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "gbwc=", 5)) {
+		if (strict_strtoul(str + 5, 0, &val) == 0)
+			tx4927_pci_opts.gbwc = val;
+		return NULL;
+	}
+	return str;
+}
+
 void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
 			      struct pci_controller *channel, int extarb)
 {
@@ -406,3 +432,95 @@ void tx4927_report_pcic_status(void)
 			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
 	}
 }
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+	__u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+	printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+	for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+		if (i % 32 == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_INFO "%04x:", i);
+		}
+		/* skip registers with side-effects */
+		if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+			printk(KERN_CONT " XXXXXXXX");
+			continue;
+		}
+		printk(KERN_CONT " %08x", __raw_readl(preg));
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+	}
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	struct tx4927_pcic_reg __iomem *pcicptr =
+		(struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+		       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+		tx4927_report_pcic_status1(pcicptr);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+			     &pcicptr->pcistatus);
+		__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+		__raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+		__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	tx4927_dump_pcic_settings1(pcicptr);
+	panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+	if (!pcicptr)
+		return;
+	if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		/*
+		 * swap reqBP and reqXP (raise priority of SLC90E66).
+		 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+		 * PCI Backplane board.
+		 */
+		__raw_writel(0x72543610, &pcicptr->pbareqport);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Use Fixed ParkMaster (required by SLC90E66) */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+			     TX4927_PCIC_PBACFG_PBAEN,
+			     &pcicptr->pbacfg);
+		printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+		       __raw_readl(&pcicptr->pbareqport));
+	}
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	tx4927_quirk_slc90e66_bridge);
+#endif

arch/mips/pci/pci-tx4927.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
@@ -81,3 +82,12 @@ int __init tx4927_pciclk66_setup(void)
 		pciclk = -1;
 	return pciclk;
 }
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}

arch/mips/pci/pci-tx4938.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
+#include <linux/interrupt.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
@@ -132,3 +133,12 @@ int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
 	}
 	return -1;
 }
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}

arch/mips/pci/pci.c

@@ -328,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
 	return str;
 }

arch/mips/pmc-sierra/msp71xx/msp_serial.c

@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val = (uint32_t)c;
-
-	local_irq_disable();
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	uart[0] = val;
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	local_irq_enable();
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val;
-
-	while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-	val = uart[0];
-
-	return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-	unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-	/* Enable FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-		(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-	/* Select brtc divisor */
-	writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Store divisor lsb */
-	writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-	/* Store divisor msb */
-	writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-	/* Set 8N1 mode */
-	writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Disable flow control */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-	/* Disable receive interrupt(!) */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
 	char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
 		case MACH_MSP7120_FPGA:
 			/* Enable UART1 on MSP4200 and MSP7120 */
 			*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-			/* Initialize UART1 for kgdb since PMON doesn't */
-			if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-				if( mips_machtype == MACH_MSP4200_FPGA
-				 || mips_machtype == MACH_MSP7120_FPGA )
-					initDebugPort(uartclk, 19200);
-				else
-					initDebugPort(uartclk, 57600);
-			}
-#endif
 			break;
 
 		default:

arch/mips/pmc-sierra/yosemite/Makefile

@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/pmc-sierra/yosemite/dbg_io.c

-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define	YOSEMITE_BAUD_2400	2400
-#define	YOSEMITE_BAUD_4800	4800
-#define	YOSEMITE_BAUD_9600	9600
-#define	YOSEMITE_BAUD_19200	19200
-#define	YOSEMITE_BAUD_38400	38400
-#define	YOSEMITE_BAUD_57600	57600
-#define	YOSEMITE_BAUD_115200	115200
-
-#define	YOSEMITE_PARITY_NONE	0
-#define	YOSEMITE_PARITY_ODD	0x08
-#define	YOSEMITE_PARITY_EVEN	0x18
-#define	YOSEMITE_PARITY_MARK	0x28
-#define	YOSEMITE_PARITY_SPACE	0x38
-
-#define	YOSEMITE_DATA_5BIT	0x0
-#define	YOSEMITE_DATA_6BIT	0x1
-#define	YOSEMITE_DATA_7BIT	0x2
-#define	YOSEMITE_DATA_8BIT	0x3
-
-#define	YOSEMITE_STOP_1BIT	0x0
-#define	YOSEMITE_STOP_2BIT	0x4
-
-/* This is crucial */
-#define	SERIAL_REG_OFS		0x1
-
-#define	SERIAL_RCV_BUFFER	0x0
-#define	SERIAL_TRANS_HOLD	0x0
-#define	SERIAL_SEND_BUFFER	0x0
-#define	SERIAL_INTR_ENABLE	(1 * SERIAL_REG_OFS)
-#define	SERIAL_INTR_ID		(2 * SERIAL_REG_OFS)
-#define	SERIAL_DATA_FORMAT	(3 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_CONTROL	(3 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_CONTROL	(4 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_OUTPUT	(4 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_STATUS	(5 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_STATUS	(6 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_INPUT	(6 * SERIAL_REG_OFS)
-#define	SERIAL_SCRATCH_PAD	(7 * SERIAL_REG_OFS)
-
-#define	SERIAL_DIVISOR_LSB	(0 * SERIAL_REG_OFS)
-#define	SERIAL_DIVISOR_MSB	(1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define	SERIAL_READ(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs)))
-
-#define	SERIAL_WRITE(ofs, val)		((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define	SERIAL_READ_1(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs)))
-
-#define	SERIAL_WRITE_1(ofs, val)	((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-		divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-		SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-			       (divisor & 0xff00) >> 8);
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-		       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-	/* Enable Interrupts */
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-	       unsigned char stop)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-		divisor = TITAN_SERIAL_BASE_BAUD / baud;
-		SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-	return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-	SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-	return 1;
-}

arch/mips/pmc-sierra/yosemite/irq.c

@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-	/* At this point, initialize the second serial port */
-	init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
 	register_gdb_console();
 #endif

arch/mips/rb532/gpio.c

@@ -64,7 +64,8 @@ static struct resource rb532_dev3_ctl_res[] = {
 
 void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
 {
-	unsigned flags, data;
+	unsigned long flags;
+	unsigned data;
 	unsigned i = 0;
 
 	spin_lock_irqsave(&dev3.lock, flags);
@@ -90,7 +91,7 @@ EXPORT_SYMBOL(get_434_reg);
 
 void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
 {
-	unsigned flags;
+	unsigned long flags;
 
 	spin_lock_irqsave(&dev3.lock, flags);
 

arch/mips/rb532/time.c

@@ -49,8 +49,8 @@ static unsigned long __init cal_r4koff(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq, flags;
-	unsigned long r4k_offset;
+	unsigned int est_freq;
+	unsigned long flags, r4k_offset;
 
 	local_irq_save(flags);
 

arch/mips/sgi-ip22/ip22-setup.c

@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
 		add_preferred_console("arc", 0, NULL);
 	}
 
-#ifdef CONFIG_KGDB
-	{
-	char *kgdb_ttyd = prom_getcmdline();
-
-	if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-		int line;
-		kgdb_ttyd += strlen("kgdb=ttyd");
-		if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-			printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-			       ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-		line = *kgdb_ttyd == '2' ? 0 : 1;
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session\n", line ? 1 : 2);
-		rs_kgdb_hook(line);
-
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session, please connect your debugger\n", line ? 1:2);
-
-		kgdb_enabled = 1;
-		/* Breakpoints and stuff are in sgi_irq_setup() */
-	}
-	}
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
 	{
 		ULONG *gfxinfo;

arch/mips/sgi-ip27/Makefile

@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
-obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/sgi-ip27/ip27-dbgio.c

-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-	struct ioc3 *ioc3;
-
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-	return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_DR) == 0);
-	return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-	uart->iu_thr = c;
-}

arch/mips/sibyte/bcm1480/irq.c

@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
 	.name = "BCM1480-IMR",
 	.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq << 3)));
-		bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-		register_gdb_console();
-#endif
-		printk("Waiting for GDB on UART port %d\n", kgdb_port);
-		set_debug_traps();
-		breakpoint();
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat.irqs[smp_processor_id()][kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
 		bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)
-		bcm1480_kgdb_interrupt();		/* KGDB (uart 1) */
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 }

arch/mips/sibyte/cfe/setup.c

@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;
@@ -246,9 +242,6 @@ void __init prom_init(void)
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-	char *arg;
-#endif
 
 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
 		}
 	}
 
-#ifdef CONFIG_KGDB
-	if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-		kgdb_port = (arg[10] == '0') ? 0 : 1;
-	else
-		kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;

arch/mips/sibyte/sb1250/irq.c

@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
 	.name = "SB1250-IMR",
 	.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		__raw_writeq(M_DUART_IMR_BRK,
-			     IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_IMR_REGISTER(0,
-						   R_IMR_INTERRUPT_MAP_BASE) +
-				    (kgdb_irq << 3)));
-		sb1250_unmask_irq(0, kgdb_irq);
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat_this_cpu.irqs[kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
 		sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
-		sb1250_kgdb_interrupt();
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 	else

arch/mips/sibyte/swarm/Makefile

 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
-obj-$(CONFIG_KGDB)		+= dbg_io.o

arch/mips/sibyte/swarm/dbg_io.c

-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 	115200, 8, N, 1.
- */
-
-#define	BAUD_RATE		115200
-#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
-#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
-#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
-#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
-
-static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-	duart_out(R_DUART_MODE_REG_1, data | parity);
-	duart_out(R_DUART_MODE_REG_2, stop);
-	duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-	duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-	return duart_in(R_DUART_RX_HOLD);
-}
-

arch/mips/txx9/Kconfig

+config MACH_TX39XX
+	bool
+	select MACH_TXX9
+	select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+	bool
+	select MACH_TXX9
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+	bool
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
 config TOSHIBA_JMR3927
 	bool "Toshiba JMR-TX3927 board"
 	depends on MACH_TX39XX
@@ -24,68 +48,37 @@ config TOSHIBA_RBTX4938
 config SOC_TX3927
 	bool
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
 	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4927
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config SOC_TX4938
 	bool
-	select CEVT_R4K
-	select CSRC_R4K
 	select CEVT_TXX9
-	select DMA_NONCOHERENT
 	select HAS_TXX9_SERIAL
 	select HW_HAS_PCI
-	select IRQ_CPU
 	select IRQ_TXX9
 	select PCI_TX4927
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select GPIO_TXX9
 
 config TOSHIBA_FPCIB0
 	bool "FPCIB0 Backplane Support"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	select I8259
 
 config PICMG_PCI_BACKPLANE_DEFAULT
 	bool "Support for PICMG PCI Backplane"
-	depends on PCI && (MACH_TX39XX || MACH_TX49XX)
+	depends on PCI && MACH_TXX9
 	default y if !TOSHIBA_FPCIB0
 
 if TOSHIBA_RBTX4938

arch/mips/txx9/generic/Makefile

@@ -4,9 +4,9 @@
 
 obj-y	+= setup.o
 obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
 obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
 obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
 obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)	+= dbgio.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/txx9/generic/dbgio.c

-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-	return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-	return (txx9_sio_kdbg_wr(byte));
-}
-

arch/mips/txx9/generic/irq_tx3927.c

+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+	int i;
+
+	txx9_irq_init(TX3927_IRC_REG);
+	/* raise priority for timers, sio */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+	for (i = 0; i < TX3927_NR_SIO; i++)
+		txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}

arch/mips/txx9/generic/pci.c

@@ -386,3 +386,39 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	return txx9_board_vec->pci_map_irq(dev, slot, pin);
 }
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+		return NULL;
+	if (!strcmp(str, "picmg")) {
+		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strcmp(str, "nopicmg")) {
+		/* non-PICMG compliant backplane (TOSHIBA
+		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strncmp(str, "clk=", 4)) {
+		char *val = str + 4;
+		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+		if (strcmp(val, "33") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+		else if (strcmp(val, "66") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+		else /* "auto" */
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+		return NULL;
+	} else if (!strncmp(str, "err=", 4)) {
+		if (!strcmp(str + 4, "panic"))
+			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+		else if (!strcmp(str + 4, "ignore"))
+			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+		return NULL;
+	}
+	return str;
+}

arch/mips/txx9/generic/setup.c

@@ -20,9 +20,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <asm/bootinfo.h>
 #include <asm/time.h>
+#include <asm/reboot.h>
 #include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
 #ifdef CONFIG_CPU_TX49XX
 #include <asm/txx9/tx4938.h>
 #endif
@@ -187,6 +191,117 @@ char * __init prom_getcmdline(void)
 	return &(arcs_cmdline[0]);
 }
 
+static void __noreturn txx9_machine_halt(void)
+{
+	local_irq_disable();
+	clear_c0_status(ST0_IM);
+	while (1) {
+		if (cpu_wait) {
+			(*cpu_wait)();
+			if (cpu_has_counter) {
+				/*
+				 * Clear counter interrupt while it
+				 * breaks WAIT instruction even if
+				 * masked.
+				 */
+				write_c0_compare(0);
+			}
+		}
+	}
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", busid,
+					res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+	struct platform_device *pdev =
+		platform_device_alloc("tc35815-mac", id);
+	if (!pdev ||
+	    platform_device_add_data(pdev, ethaddr, 6) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+			  unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	struct uart_port req;
+
+	memset(&req, 0, sizeof(req));
+	req.line = line;
+	req.iotype = UPIO_MEM;
+	req.membase = ioremap(baseaddr, 0x24);
+	req.mapbase = baseaddr;
+	req.irq = irq;
+	if (!nocts)
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+	if (sclk) {
+		req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+		req.uartclk = sclk;
+	} else
+		req.uartclk = TXX9_IMCLK;
+	early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+	txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR	0x0c
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SICISR_TXALS	0x00000002
+	while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+		 TXX9_SICISR_TXALS))
+		;
+	__raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+	early_txx9_sio_port = ioremap(baseaddr, 0x24);
+	txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
 /* wrappers */
 void __init plat_mem_setup(void)
 {
@@ -194,6 +309,15 @@ void __init plat_mem_setup(void)
 	ioport_resource.end = ~0UL;	/* no limit */
 	iomem_resource.start = 0;
 	iomem_resource.end = ~0UL;	/* no limit */
+
+	/* fallback restart/halt routines */
+	_machine_restart = (void (*)(char *))txx9_machine_halt;
+	_machine_halt = txx9_machine_halt;
+	pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+	pcibios_plat_setup = txx9_pcibios_setup;
+#endif
 	txx9_board_vec->mem_setup();
 }
 

arch/mips/txx9/generic/setup_tx3927.c

+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+	txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+	int i;
+	unsigned int conf;
+
+	/* don't enable - see errata */
+	txx9_ccfg_toeon = 0;
+	if (strstr(prom_getcmdline(), "toeon") != NULL)
+		txx9_ccfg_toeon = 1;
+
+	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+			  TX3927_REG_SIZE);
+
+	/* SDRAMC,ROMC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx3927_romcptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	txx9_gbus_clock = txx9_cpu_clock / 2;
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+	/* clear BusErrorOnWrite flag */
+	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+	if (read_c0_conf() & TX39_CONF_WBON)
+		/* Disable PCI snoop */
+		tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	else
+		/* Enable PCI SNOOP - with write through only */
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+	       tx3927_ccfgptr->crir,
+	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+	/* TMR */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_tmr_init(TX3927_TMR_REG(i));
+
+	/* DMA */
+	tx3927_dmaptr->mcr = 0;
+	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+		/* reset channel */
+		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+		tx3927_dmaptr->ch[i].ccr = 0;
+	}
+	/* enable DMA */
+#ifdef __BIG_ENDIAN
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+	/* PIO */
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	conf = read_c0_conf();
+	if (!(conf & TX39_CONF_ICE))
+		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+	else if (!(conf & TX39_CONF_WBON))
+		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+	else if (!(conf & TX39_CONF_CWFON))
+		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+	else
+		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+	txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+			     TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+			     TXX9_IMCLK);
+	txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX3927_SIO_REG(i),
+			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}

arch/mips/txx9/generic/setup_tx4927.c

@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4927.h>
 
-void __init tx4927_wdr_init(void)
+static void __init tx4927_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4927_ccfg_set(TX4927_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4927_wdr_init(void)
 	tx4927_ccfg_set(TX4927_CCFG_WR);
 }
 
+void __init tx4927_wdt_init(void)
+{
+	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4927_sdram_resource[4];
 
 void __init tx4927_setup(void)
@@ -173,22 +177,12 @@ void __init tx4927_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4927_setup_serial(void)
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
-
-	for (i = 0; i < 2; i++) {
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4927_SIO_REG(i);
-		req.mapbase = TX4927_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4927_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
-	}
-#endif /* CONFIG_SERIAL_TXX9 */
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 }

arch/mips/txx9/generic/setup_tx4938.c

@@ -13,7 +13,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_core.h>
 #include <linux/param.h>
 #include <asm/txx9irq.h>
 #include <asm/txx9tmr.h>
@@ -21,7 +20,7 @@
 #include <asm/txx9/generic.h>
 #include <asm/txx9/tx4938.h>
 
-void __init tx4938_wdr_init(void)
+static void __init tx4938_wdr_init(void)
 {
 	/* clear WatchDogReset (W1C) */
 	tx4938_ccfg_set(TX4938_CCFG_WDRST);
@@ -29,6 +28,11 @@ void __init tx4938_wdr_init(void)
 	tx4938_ccfg_set(TX4938_CCFG_WR);
 }
 
+void __init tx4938_wdt_init(void)
+{
+	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
 static struct resource tx4938_sdram_resource[4];
 static struct resource tx4938_sram_resource;
 
@@ -233,11 +237,9 @@ void __init tx4938_time_init(unsigned int tmrnr)
 				     TXX9_IMCLK);
 }
 
-void __init tx4938_setup_serial(void)
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
 {
-#ifdef CONFIG_SERIAL_TXX9
 	int i;
-	struct uart_port req;
 	unsigned int ch_mask = 0;
 
 	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
@@ -245,15 +247,24 @@ void __init tx4938_setup_serial(void)
 	for (i = 0; i < 2; i++) {
 		if ((1 << i) & ch_mask)
 			continue;
-		memset(&req, 0, sizeof(req));
-		req.line = i;
-		req.iotype = UPIO_MEM;
-		req.membase = (unsigned char __iomem *)TX4938_SIO_REG(i);
-		req.mapbase = TX4938_SIO_REG(i) & 0xfffffffffULL;
-		req.irq = TXX9_IRQ_BASE + TX4938_IR_SIO(i);
-		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-		req.uartclk = TXX9_IMCLK;
-		early_serial_txx9_setup(&req);
+		txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
 	}
-#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+void __init tx4938_spi_init(int busid)
+{
+	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+		      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
 }

arch/mips/txx9/generic/smsc_fdc37m81x.c

@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/txx9/smsc_fdc37m81x.h>
 
-#define DEBUG
-
 /* Common Registers */
 #define SMSC_FDC37M81X_CONFIG_INDEX  0x00
 #define SMSC_FDC37M81X_CONFIG_DATA   0x01
@@ -55,7 +53,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-static unsigned long g_smsc_fdc37m81x_base = 0;
+static unsigned long g_smsc_fdc37m81x_base;
 
 static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
 {
@@ -107,7 +105,8 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	u8 chip_id;
 
 	if (g_smsc_fdc37m81x_base)
-		printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
+		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+		       __func__,
 		       field, g_smsc_fdc37m81x_base);
 
 	g_smsc_fdc37m81x_base = port;
@@ -118,7 +117,7 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
 		smsc_fdc37m81x_config_end();
 	else {
-		printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
+		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
 		       chip_id);
 		g_smsc_fdc37m81x_base = 0;
 	}
@@ -127,22 +126,23 @@ unsigned long __init smsc_fdc37m81x_init(unsigned long port)
 }
 
 #ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
 {
-	printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
+	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+	       key, dev, reg,
 	       smsc_fdc37m81x_rd(reg));
 }
 
 void smsc_fdc37m81x_config_dump(void)
 {
 	u8 orig;
-	char *fname = "smsc_fdc37m81x_config_dump()";
+	const char *fname = __func__;
 
 	smsc_fdc37m81x_config_beg();
 
 	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
 
-	printk("%s: common\n", fname);
+	printk(KERN_INFO "%s: common\n", fname);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_DNUM);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
@@ -154,7 +154,7 @@ void smsc_fdc37m81x_config_dump(void)
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
 				       SMSC_FDC37M81X_PMGT);
 
-	printk("%s: keyboard\n", fname);
+	printk(KERN_INFO "%s: keyboard\n", fname);
 	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
 	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
 				       SMSC_FDC37M81X_ACTIVE);

arch/mips/txx9/jmr3927/Makefile

@@ -3,6 +3,5 @@
 #
 
 obj-y	+= prom.o irq.o setup.o
-obj-$(CONFIG_KGDB)	+= kgdb_io.o
 
 EXTRA_CFLAGS += -Werror

arch/mips/txx9/jmr3927/irq.c

@@ -30,15 +30,11 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
 
 #include <asm/io.h>
 #include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
@@ -46,13 +42,6 @@
 #error JMR3927_IRQ_END > NR_IRQS
 #endif
 
-static unsigned char irc_level[TX3927_NUM_IR] = {
-	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
-	7, 7,			/* SIO */
-	5, 5, 5, 0, 0,		/* DMA, PIO, PCI */
-	6, 6, 6			/* TMR */
-};
-
 /*
  * CP0_STATUS is a thread's resource (saved/restored on context switch).
  * So disable_irq/enable_irq MUST handle IOC/IRC registers.
@@ -103,26 +92,18 @@ static int jmr3927_irq_dispatch(int pending)
 	return irq;
 }
 
-#ifdef CONFIG_PCI
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-	.handler = jmr3927_pcierr_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "PCI error",
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
 };
-#endif
-
-static void __init jmr3927_irq_init(void);
 
 void __init jmr3927_irq_setup(void)
 {
+	int i;
+
 	txx9_irq_dispatch = jmr3927_irq_dispatch;
 	/* Now, interrupt control disabled, */
 	/* all IRC interrupts are masked, */
@@ -138,34 +119,10 @@ void __init jmr3927_irq_setup(void)
 	/* clear PCI Reset interrupts */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 
-	jmr3927_irq_init();
+	tx3927_irq_init();
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 
 	/* setup IOC interrupt 1 (PCI, MODEM) */
 	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
-
-#ifdef CONFIG_PCI
-	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-	.name = "jmr3927_ioc",
-	.ack = mask_irq_ioc,
-	.mask = mask_irq_ioc,
-	.mask_ack = mask_irq_ioc,
-	.unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-	u32 i;
-
-	txx9_irq_init(TX3927_IRC_REG);
-	for (i = 0; i < TXx9_MAX_IR; i++)
-		txx9_irq_set_pri(i, irc_level[i]);
-	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
 }

arch/mips/txx9/jmr3927/kgdb_io.c

-/*
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/txx9/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(0)->tfifo = c;
-
-	return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(0)->dicr;
-	tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(0)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(0)->dicr = dicr;
-
-	return c;
-}
-
-static void debugInit(int baud)
-{
-	tx3927_sioptr(0)->lcr = 0x020;
-	tx3927_sioptr(0)->dicr = 0;
-	tx3927_sioptr(0)->disr = 0x4100;
-	tx3927_sioptr(0)->cisr = 0x014;
-	tx3927_sioptr(0)->fcr = 0;
-	tx3927_sioptr(0)->flcr = 0x02;
-	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-}

arch/mips/txx9/jmr3927/prom.c

@@ -36,41 +36,18 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <asm/bootinfo.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/jmr3927.h>
 
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
-
 void __init jmr3927_prom_init(void)
 {
 	/* CCFG */
 	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
+		printk(KERN_ERR "TX3927 TLB off\n");
 
 	prom_init_cmdline();
 	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX3927_SIO_REG(1));
 }

arch/mips/txx9/jmr3927/setup.c

@@ -32,27 +32,18 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
 #include <asm/reboot.h>
+#include <asm/txx9pio.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
 #include <asm/txx9/jmr3927.h>
 #include <asm/mipsregs.h>
 
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
+static void jmr3927_machine_restart(char *command)
 {
+	local_irq_disable();
 #if 1	/* Resetting PCI bus */
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
@@ -61,33 +52,13 @@ static inline void do_reset(void)
 	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 #endif
 	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-	local_irq_disable();
-	puts("Rebooting...");
-	do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-	puts("JMR-TX3927 halted.\n");
-	while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-	puts("JMR-TX3927 halted. Please turn off the power.\n");
-	while (1);
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init jmr3927_time_init(void)
 {
-	txx9_clockevent_init(TX3927_TMR_REG(0),
-			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-			     JMR3927_IMCLK);
-	txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
+	tx3927_time_init(0, 1);
 }
 
 #define DO_WRITE_THROUGH
@@ -102,11 +73,6 @@ static void __init jmr3927_mem_setup(void)
 	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
 
 	_machine_restart = jmr3927_machine_restart;
-	_machine_halt = jmr3927_machine_halt;
-	pm_power_off = jmr3927_machine_power_off;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
 
 	/* cache setup */
 	{
@@ -125,7 +91,8 @@ static void __init jmr3927_mem_setup(void)
 #endif
 
 		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
+		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+			  TX39_CONF_WBON | TX39_CONF_CWFON);
 		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
 		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
 		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
@@ -138,47 +105,14 @@ static void __init jmr3927_mem_setup(void)
 	/* initialize board */
 	jmr3927_board_init();
 
-	argptr = prom_getcmdline();
-
-	if ((argptr = strstr(argptr, "toeon")) != NULL)
-		jmr3927_ccfg_toeon = 1;
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "ip=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " ip=bootp");
-	}
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-			req.mapbase = TX3927_SIO_REG(i);
-			req.irq = i == 0 ?
-				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-			if (i == 0)
-				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = JMR3927_IMCLK;
-			early_serial_txx9_setup(&req);
-		}
-	}
+	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS1,115200");
-	}
-#endif
 #endif
 }
 
-static void tx3927_setup(void);
-
 static void __init jmr3927_pci_setup(void)
 {
 #ifdef CONFIG_PCI
@@ -199,32 +133,13 @@ static void __init jmr3927_pci_setup(void)
 		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
 	}
 	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+	tx3927_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
 static void __init jmr3927_board_init(void)
 {
-	tx3927_setup();
-	jmr3927_pci_setup();
-
-	/* SIO0 DTR on */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-	jmr3927_led_set(0);
-
-	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-	int i;
-
 	txx9_cpu_clock = JMR3927_CORECLK;
-	txx9_gbus_clock = JMR3927_GBUSCLK;
 	/* SDRAMC are configured by PROM */
 
 	/* ROMC */
@@ -233,74 +148,32 @@ static void __init tx3927_setup(void)
 	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
 	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
 
-	/* CCFG */
-	/* enable Timeout BusError */
-	if (jmr3927_ccfg_toeon)
-		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-	/* clear BusErrorOnWrite flag */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-	/* Disable PCI snoop */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-	/* do reset on watchdog */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-	/* Enable PCI SNOOP - with write through only */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
 	/* Pin selection */
 	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
 	tx3927_ccfgptr->pcfg |=
 		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
 		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
 
-	printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-	/* TMR */
-	for (i = 0; i < TX3927_NR_TMR; i++)
-		txx9_tmr_init(TX3927_TMR_REG(i));
-
-	/* DMA */
-	tx3927_dmaptr->mcr = 0;
-	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-		/* reset channel */
-		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-		tx3927_dmaptr->ch[i].ccr = 0;
-	}
-	/* enable DMA */
-#ifdef __BIG_ENDIAN
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
+	tx3927_setup();
 
-	/* PIO */
 	/* PIO[15:12] connected to LEDs */
 	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	__raw_writel(0, &tx3927_pioptr->maskcpu);
-	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
 	gpio_request(11, "dipsw1");
 	gpio_request(10, "dipsw2");
-	{
-		unsigned int conf;
 
-	conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-	}
+	jmr3927_pci_setup();
+
+	/* SIO0 DTR on */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+	jmr3927_led_set(0);
+
+	printk(KERN_INFO
+	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_dipsw1(), jmr3927_dipsw2(),
+	       jmr3927_dipsw3(), jmr3927_dipsw4());
 }
 
 /* This trick makes rtc-ds1742 driver usable as is. */
@@ -316,42 +189,21 @@ static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
 #endif
 }
 
-static int __init jmr3927_rtc_init(void)
+static void __init jmr3927_rtc_init(void)
 {
 	static struct resource __initdata res = {
 		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
 		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev;
-	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-	return txx9_wdt_init(TX3927_TMR_REG(2));
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
 }
 
 static void __init jmr3927_device_init(void)
 {
 	__swizzle_addr_b = jmr3927_swizzle_addr_b;
 	jmr3927_rtc_init();
-	jmr3927_wdt_init();
+	tx3927_wdt_init();
 }
 
 struct txx9_board_vec jmr3927_vec __initdata = {

arch/mips/txx9/rbtx4927/irq.c

@@ -27,85 +27,86 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 /*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
 
 #include <linux/init.h>
 #include <linux/types.h>
@@ -134,7 +135,7 @@ static int toshiba_rbtx4927_irq_nested(int sw_irq)
 	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
 	if (level3)
 		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
-	return (sw_irq);
+	return sw_irq;
 }
 
 static void __init toshiba_rbtx4927_irq_ioc_init(void)

arch/mips/txx9/rbtx4927/prom.c

@@ -38,4 +38,5 @@ void __init rbtx4927_prom_init(void)
 {
 	prom_init_cmdline();
 	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
 }

arch/mips/txx9/rbtx4927/setup.c

@@ -46,12 +46,9 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/processor.h>
 #include <asm/reboot.h>
 #include <asm/txx9/generic.h>
 #include <asm/txx9/pci.h>
@@ -103,6 +100,7 @@ static void __init tx4927_pci_setup(void)
 		tx4927_report_pciclk();
 		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
 	}
+	tx4927_setup_pcierr_irq();
 }
 
 static void __init tx4937_pci_setup(void)
@@ -149,6 +147,7 @@ static void __init tx4937_pci_setup(void)
 		tx4938_report_pciclk();
 		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
 	}
+	tx4938_setup_pcierr_irq();
 }
 
 static void __init rbtx4927_arch_init(void)
@@ -165,17 +164,8 @@ static void __init rbtx4937_arch_init(void)
 #define rbtx4937_arch_init NULL
 #endif /* CONFIG_PCI */
 
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
 static void toshiba_rbtx4927_restart(char *command)
 {
-	printk(KERN_NOTICE "System Rebooting...\n");
-
 	/* enable the s/w reset register */
 	writeb(1, rbtx4927_softresetlock_addr);
 
@@ -186,24 +176,8 @@ static void toshiba_rbtx4927_restart(char *command)
 	/* do a s/w reset */
 	writeb(1, rbtx4927_softreset_addr);
 
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-static void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4927_clock_init(void);
@@ -214,9 +188,6 @@ static void __init rbtx4927_mem_setup(void)
 	u32 cp0_config;
 	char *argptr;
 
-	/* f/w leaves this on at startup */
-	clear_c0_status(ST0_ERL);
-
 	/* enable caches -- HCP5 does this, pmon does not */
 	cp0_config = read_c0_config();
 	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
@@ -231,37 +202,21 @@ static void __init rbtx4927_mem_setup(void)
 	}
 
 	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic,
 				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
 				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
 #endif
 
-	tx4927_setup_serial();
+	tx4927_sio_init(0, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
 #endif
 }
 
@@ -324,19 +279,17 @@ static void __init rbtx4927_time_init(void)
 	tx4927_time_init(0);
 }
 
-static int __init toshiba_rbtx4927_rtc_init(void)
+static void __init toshiba_rbtx4927_rtc_init(void)
 {
 	struct resource res = {
 		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
 		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
 		.flags	= IORESOURCE_MEM,
 	};
-	struct platform_device *dev =
 	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
-static int __init rbtx4927_ne_init(void)
+static void __init rbtx4927_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -348,36 +301,14 @@ static int __init rbtx4927_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static void __init rbtx4927_device_init(void)
 {
 	toshiba_rbtx4927_rtc_init();
 	rbtx4927_ne_init();
-	rbtx4927_wdt_init();
+	tx4927_wdt_init();
 }
 
 struct txx9_board_vec rbtx4927_vec __initdata = {

arch/mips/txx9/rbtx4938/irq.c

@@ -11,59 +11,57 @@
  */
 
 /*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <asm/mipsregs.h>
@@ -93,9 +91,6 @@ static int toshiba_rbtx4938_irq_nested(int sw_irq)
 	return sw_irq;
 }
 
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
 static void __init
 toshiba_rbtx4938_irq_ioc_init(void)
 {

arch/mips/txx9/rbtx4938/prom.c

@@ -22,4 +22,5 @@ void __init rbtx4938_prom_init(void)
 	prom_init_cmdline();
 #endif
 	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
 }

arch/mips/txx9/rbtx4938/setup.c

@@ -13,9 +13,6 @@
 #include <linux/types.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pm.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
@@ -28,33 +25,14 @@
 #include <asm/txx9/spi.h>
 #include <asm/txx9pio.h>
 
-static void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-static void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
 static void rbtx4938_machine_restart(char *command)
 {
 	local_irq_disable();
-
-	printk("Rebooting...");
 	writeb(1, rbtx4938_softresetlock_addr);
 	writeb(1, rbtx4938_sfvol_addr);
 	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
+	/* fallback */
+	(*_machine_halt)();
 }
 
 static void __init rbtx4938_pci_setup(void)
@@ -121,6 +99,7 @@ static void __init rbtx4938_pci_setup(void)
 		register_pci_controller(c);
 		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
 	}
+	tx4938_setup_pcierr_irq();
 #endif /* CONFIG_PCI */
 }
 
@@ -151,19 +130,7 @@ static int __init rbtx4938_ethaddr_init(void)
 		if (sum)
 			printk(KERN_WARNING "seeprom: bad checksum.\n");
 	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(__raw_readq(&tx4938_ccfgptr->pcfg) &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
+	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
 #endif /* CONFIG_PCI */
 	return 0;
 }
@@ -193,51 +160,36 @@ static void __init rbtx4938_mem_setup(void)
 
 #ifdef CONFIG_PCI
 	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
 #else
 	set_io_port_base(RBTX4938_ETHER_BASE);
 #endif
 
-	tx4938_setup_serial();
+	tx4938_sio_init(7372800, 0);
 #ifdef CONFIG_SERIAL_TXX9_CONSOLE
 	argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
+	if (!strstr(argptr, "console="))
 		strcat(argptr, " console=ttyS0,38400");
-        }
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
+	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
 	txx9_clear64(&tx4938_ccfgptr->pcfg,
 		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
+	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 #endif
 
 #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
+	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
 	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
 	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
 #endif
 
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
 	rbtx4938_spi_setup();
 	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
 	/* fixup piosel */
@@ -258,11 +210,9 @@ static void __init rbtx4938_mem_setup(void)
 	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
 	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
 	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
+		printk(KERN_ERR "request resource for fpga failed\n");
 
 	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
 
 	writeb(0xff, rbtx4938_led_addr);
 	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
@@ -270,7 +220,7 @@ static void __init rbtx4938_mem_setup(void)
 	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
 }
 
-static int __init rbtx4938_ne_init(void)
+static void __init rbtx4938_ne_init(void)
 {
 	struct resource res[] = {
 		{
@@ -282,10 +232,7 @@ static int __init rbtx4938_ne_init(void)
 			.flags	= IORESOURCE_IRQ,
 		}
 	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
 }
 
 static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
@@ -321,24 +268,6 @@ static struct gpio_chip rbtx4938_spi_gpio_chip = {
 	.ngpio = 3,
 };
 
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
 static int __init rbtx4938_spi_init(void)
 {
 	struct spi_board_info srtc_info = {
@@ -361,7 +290,7 @@ static int __init rbtx4938_spi_init(void)
 	gpio_direction_output(16 + SEEPROM2_CS, 1);
 	gpio_request(16 + SEEPROM3_CS, "seeprom3");
 	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
+	tx4938_spi_init(0);
 	return 0;
 }
 
@@ -372,30 +301,11 @@ static void __init rbtx4938_arch_init(void)
 	rbtx4938_spi_init();
 }
 
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-
 static void __init rbtx4938_device_init(void)
 {
 	rbtx4938_ethaddr_init();
 	rbtx4938_ne_init();
-	rbtx4938_wdt_init();
+	tx4938_wdt_init();
 }
 
 struct txx9_board_vec rbtx4938_vec __initdata = {

include/asm-mips/gdb-stub.h

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995 Andreas Busse
- * Copyright (C) 2003 Ralf Baechle
- */
-#ifndef _ASM_GDB_STUB_H
-#define _ASM_GDB_STUB_H
-
-
-/*
- * important register numbers
- */
-
-#define REG_EPC			37
-#define REG_FP			72
-#define REG_SP			29
-
-/*
- * Stack layout for the GDB exception handler
- * Derived from the stack layout described in asm-mips/stackframe.h
- *
- * The first PTRSIZE*6 bytes are argument save space for C subroutines.
- */
-#define NUMREGS			90
-
-#define GDB_FR_REG0		(PTRSIZE*6)			/* 0 */
-#define GDB_FR_REG1		((GDB_FR_REG0) + LONGSIZE)	/* 1 */
-#define GDB_FR_REG2		((GDB_FR_REG1) + LONGSIZE)	/* 2 */
-#define GDB_FR_REG3		((GDB_FR_REG2) + LONGSIZE)	/* 3 */
-#define GDB_FR_REG4		((GDB_FR_REG3) + LONGSIZE)	/* 4 */
-#define GDB_FR_REG5		((GDB_FR_REG4) + LONGSIZE)	/* 5 */
-#define GDB_FR_REG6		((GDB_FR_REG5) + LONGSIZE)	/* 6 */
-#define GDB_FR_REG7		((GDB_FR_REG6) + LONGSIZE)	/* 7 */
-#define GDB_FR_REG8		((GDB_FR_REG7) + LONGSIZE)	/* 8 */
-#define GDB_FR_REG9	        ((GDB_FR_REG8) + LONGSIZE)	/* 9 */
-#define GDB_FR_REG10		((GDB_FR_REG9) + LONGSIZE)	/* 10 */
-#define GDB_FR_REG11		((GDB_FR_REG10) + LONGSIZE)	/* 11 */
-#define GDB_FR_REG12		((GDB_FR_REG11) + LONGSIZE)	/* 12 */
-#define GDB_FR_REG13		((GDB_FR_REG12) + LONGSIZE)	/* 13 */
-#define GDB_FR_REG14		((GDB_FR_REG13) + LONGSIZE)	/* 14 */
-#define GDB_FR_REG15		((GDB_FR_REG14) + LONGSIZE)	/* 15 */
-#define GDB_FR_REG16		((GDB_FR_REG15) + LONGSIZE)	/* 16 */
-#define GDB_FR_REG17		((GDB_FR_REG16) + LONGSIZE)	/* 17 */
-#define GDB_FR_REG18		((GDB_FR_REG17) + LONGSIZE)	/* 18 */
-#define GDB_FR_REG19		((GDB_FR_REG18) + LONGSIZE)	/* 19 */
-#define GDB_FR_REG20		((GDB_FR_REG19) + LONGSIZE)	/* 20 */
-#define GDB_FR_REG21		((GDB_FR_REG20) + LONGSIZE)	/* 21 */
-#define GDB_FR_REG22		((GDB_FR_REG21) + LONGSIZE)	/* 22 */
-#define GDB_FR_REG23		((GDB_FR_REG22) + LONGSIZE)	/* 23 */
-#define GDB_FR_REG24		((GDB_FR_REG23) + LONGSIZE)	/* 24 */
-#define GDB_FR_REG25		((GDB_FR_REG24) + LONGSIZE)	/* 25 */
-#define GDB_FR_REG26		((GDB_FR_REG25) + LONGSIZE)	/* 26 */
-#define GDB_FR_REG27		((GDB_FR_REG26) + LONGSIZE)	/* 27 */
-#define GDB_FR_REG28		((GDB_FR_REG27) + LONGSIZE)	/* 28 */
-#define GDB_FR_REG29		((GDB_FR_REG28) + LONGSIZE)	/* 29 */
-#define GDB_FR_REG30		((GDB_FR_REG29) + LONGSIZE)	/* 30 */
-#define GDB_FR_REG31		((GDB_FR_REG30) + LONGSIZE)	/* 31 */
-
-/*
- * Saved special registers
- */
-#define GDB_FR_STATUS		((GDB_FR_REG31) + LONGSIZE)	/* 32 */
-#define GDB_FR_LO		((GDB_FR_STATUS) + LONGSIZE)	/* 33 */
-#define GDB_FR_HI		((GDB_FR_LO) + LONGSIZE)	/* 34 */
-#define GDB_FR_BADVADDR		((GDB_FR_HI) + LONGSIZE)	/* 35 */
-#define GDB_FR_CAUSE		((GDB_FR_BADVADDR) + LONGSIZE)	/* 36 */
-#define GDB_FR_EPC		((GDB_FR_CAUSE) + LONGSIZE)	/* 37 */
-
-/*
- * Saved floating point registers
- */
-#define GDB_FR_FPR0		((GDB_FR_EPC) + LONGSIZE)	/* 38 */
-#define GDB_FR_FPR1		((GDB_FR_FPR0) + LONGSIZE)	/* 39 */
-#define GDB_FR_FPR2		((GDB_FR_FPR1) + LONGSIZE)	/* 40 */
-#define GDB_FR_FPR3		((GDB_FR_FPR2) + LONGSIZE)	/* 41 */
-#define GDB_FR_FPR4		((GDB_FR_FPR3) + LONGSIZE)	/* 42 */
-#define GDB_FR_FPR5		((GDB_FR_FPR4) + LONGSIZE)	/* 43 */
-#define GDB_FR_FPR6		((GDB_FR_FPR5) + LONGSIZE)	/* 44 */
-#define GDB_FR_FPR7		((GDB_FR_FPR6) + LONGSIZE)	/* 45 */
-#define GDB_FR_FPR8		((GDB_FR_FPR7) + LONGSIZE)	/* 46 */
-#define GDB_FR_FPR9		((GDB_FR_FPR8) + LONGSIZE)	/* 47 */
-#define GDB_FR_FPR10		((GDB_FR_FPR9) + LONGSIZE)	/* 48 */
-#define GDB_FR_FPR11		((GDB_FR_FPR10) + LONGSIZE)	/* 49 */
-#define GDB_FR_FPR12		((GDB_FR_FPR11) + LONGSIZE)	/* 50 */
-#define GDB_FR_FPR13		((GDB_FR_FPR12) + LONGSIZE)	/* 51 */
-#define GDB_FR_FPR14		((GDB_FR_FPR13) + LONGSIZE)	/* 52 */
-#define GDB_FR_FPR15		((GDB_FR_FPR14) + LONGSIZE)	/* 53 */
-#define GDB_FR_FPR16		((GDB_FR_FPR15) + LONGSIZE)	/* 54 */
-#define GDB_FR_FPR17		((GDB_FR_FPR16) + LONGSIZE)	/* 55 */
-#define GDB_FR_FPR18		((GDB_FR_FPR17) + LONGSIZE)	/* 56 */
-#define GDB_FR_FPR19		((GDB_FR_FPR18) + LONGSIZE)	/* 57 */
-#define GDB_FR_FPR20		((GDB_FR_FPR19) + LONGSIZE)	/* 58 */
-#define GDB_FR_FPR21		((GDB_FR_FPR20) + LONGSIZE)	/* 59 */
-#define GDB_FR_FPR22		((GDB_FR_FPR21) + LONGSIZE)	/* 60 */
-#define GDB_FR_FPR23		((GDB_FR_FPR22) + LONGSIZE)	/* 61 */
-#define GDB_FR_FPR24		((GDB_FR_FPR23) + LONGSIZE)	/* 62 */
-#define GDB_FR_FPR25		((GDB_FR_FPR24) + LONGSIZE)	/* 63 */
-#define GDB_FR_FPR26		((GDB_FR_FPR25) + LONGSIZE)	/* 64 */
-#define GDB_FR_FPR27		((GDB_FR_FPR26) + LONGSIZE)	/* 65 */
-#define GDB_FR_FPR28		((GDB_FR_FPR27) + LONGSIZE)	/* 66 */
-#define GDB_FR_FPR29		((GDB_FR_FPR28) + LONGSIZE)	/* 67 */
-#define GDB_FR_FPR30		((GDB_FR_FPR29) + LONGSIZE)	/* 68 */
-#define GDB_FR_FPR31		((GDB_FR_FPR30) + LONGSIZE)	/* 69 */
-
-#define GDB_FR_FSR		((GDB_FR_FPR31) + LONGSIZE)	/* 70 */
-#define GDB_FR_FIR		((GDB_FR_FSR) + LONGSIZE)	/* 71 */
-#define GDB_FR_FRP		((GDB_FR_FIR) + LONGSIZE)	/* 72 */
-
-#define GDB_FR_DUMMY		((GDB_FR_FRP) + LONGSIZE)	/* 73, unused ??? */
-
-/*
- * Again, CP0 registers
- */
-#define GDB_FR_CP0_INDEX	((GDB_FR_DUMMY) + LONGSIZE)	/* 74 */
-#define GDB_FR_CP0_RANDOM	((GDB_FR_CP0_INDEX) + LONGSIZE)	/* 75 */
-#define GDB_FR_CP0_ENTRYLO0	((GDB_FR_CP0_RANDOM) + LONGSIZE)/* 76 */
-#define GDB_FR_CP0_ENTRYLO1	((GDB_FR_CP0_ENTRYLO0) + LONGSIZE)/* 77 */
-#define GDB_FR_CP0_CONTEXT	((GDB_FR_CP0_ENTRYLO1) + LONGSIZE)/* 78 */
-#define GDB_FR_CP0_PAGEMASK	((GDB_FR_CP0_CONTEXT) + LONGSIZE)/* 79 */
-#define GDB_FR_CP0_WIRED	((GDB_FR_CP0_PAGEMASK) + LONGSIZE)/* 80 */
-#define GDB_FR_CP0_REG7		((GDB_FR_CP0_WIRED) + LONGSIZE)	/* 81 */
-#define GDB_FR_CP0_REG8		((GDB_FR_CP0_REG7) + LONGSIZE)	/* 82 */
-#define GDB_FR_CP0_REG9		((GDB_FR_CP0_REG8) + LONGSIZE)	/* 83 */
-#define GDB_FR_CP0_ENTRYHI	((GDB_FR_CP0_REG9) + LONGSIZE)	/* 84 */
-#define GDB_FR_CP0_REG11	((GDB_FR_CP0_ENTRYHI) + LONGSIZE)/* 85 */
-#define GDB_FR_CP0_REG12	((GDB_FR_CP0_REG11) + LONGSIZE)	/* 86 */
-#define GDB_FR_CP0_REG13	((GDB_FR_CP0_REG12) + LONGSIZE)	/* 87 */
-#define GDB_FR_CP0_REG14	((GDB_FR_CP0_REG13) + LONGSIZE)	/* 88 */
-#define GDB_FR_CP0_PRID		((GDB_FR_CP0_REG14) + LONGSIZE)	/* 89 */
-
-#define GDB_FR_SIZE		((((GDB_FR_CP0_PRID) + LONGSIZE) + (PTRSIZE-1)) & ~(PTRSIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * This is the same as above, but for the high-level
- * part of the GDB stub.
- */
-
-struct gdb_regs {
-	/*
-	 * Pad bytes for argument save space on the stack
-	 * 24/48 Bytes for 32/64 bit code
-	 */
-	unsigned long pad0[6];
-
-	/*
-	 * saved main processor registers
-	 */
-	long	 reg0,  reg1,  reg2,  reg3,  reg4,  reg5,  reg6,  reg7;
-	long	 reg8,  reg9, reg10, reg11, reg12, reg13, reg14, reg15;
-	long	reg16, reg17, reg18, reg19, reg20, reg21, reg22, reg23;
-	long	reg24, reg25, reg26, reg27, reg28, reg29, reg30, reg31;
-
-	/*
-	 * Saved special registers
-	 */
-	long	cp0_status;
-	long	lo;
-	long	hi;
-	long	cp0_badvaddr;
-	long	cp0_cause;
-	long	cp0_epc;
-
-	/*
-	 * Saved floating point registers
-	 */
-	long	fpr0,  fpr1,  fpr2,  fpr3,  fpr4,  fpr5,  fpr6,  fpr7;
-	long	fpr8,  fpr9,  fpr10, fpr11, fpr12, fpr13, fpr14, fpr15;
-	long	fpr16, fpr17, fpr18, fpr19, fpr20, fpr21, fpr22, fpr23;
-	long	fpr24, fpr25, fpr26, fpr27, fpr28, fpr29, fpr30, fpr31;
-
-	long	cp1_fsr;
-	long	cp1_fir;
-
-	/*
-	 * Frame pointer
-	 */
-	long	frame_ptr;
-	long    dummy;		/* unused */
-
-	/*
-	 * saved cp0 registers
-	 */
-	long	cp0_index;
-	long	cp0_random;
-	long	cp0_entrylo0;
-	long	cp0_entrylo1;
-	long	cp0_context;
-	long	cp0_pagemask;
-	long	cp0_wired;
-	long	cp0_reg7;
-	long	cp0_reg8;
-	long	cp0_reg9;
-	long	cp0_entryhi;
-	long	cp0_reg11;
-	long	cp0_reg12;
-	long	cp0_reg13;
-	long	cp0_reg14;
-	long	cp0_prid;
-};
-
-/*
- * Prototypes
- */
-
-extern int kgdb_enabled;
-void set_debug_traps(void);
-void set_async_breakpoint(unsigned long *epc);
-
-#endif /* !__ASSEMBLY__ */
-#endif /* _ASM_GDB_STUB_H */

include/asm-mips/kdebug.h

-#include <asm-generic/kdebug.h>
+#ifndef _ASM_MIPS_KDEBUG_H
+#define _ASM_MIPS_KDEBUG_H
+
+#include <linux/notifier.h>
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_FP,
+	DIE_TRAP,
+	DIE_RI,
+};
+
+#endif /* _ASM_MIPS_KDEBUG_H */

include/asm-mips/kgdb.h

+#ifndef __ASM_KGDB_H_
+#define __ASM_KGDB_H_
+
+#ifdef __KERNEL__
+
+#include <asm/sgidefs.h>
+
+#if (_MIPS_ISA == _MIPS_ISA_MIPS1) || (_MIPS_ISA == _MIPS_ISA_MIPS2) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS32)
+
+#define KGDB_GDB_REG_SIZE 32
+
+#elif (_MIPS_ISA == _MIPS_ISA_MIPS3) || (_MIPS_ISA == _MIPS_ISA_MIPS4) || \
+	(_MIPS_ISA == _MIPS_ISA_MIPS64)
+
+#ifdef CONFIG_32BIT
+#define KGDB_GDB_REG_SIZE 32
+#else /* CONFIG_CPU_32BIT */
+#define KGDB_GDB_REG_SIZE 64
+#endif
+#else
+#error "Need to set KGDB_GDB_REG_SIZE for MIPS ISA"
+#endif /* _MIPS_ISA */
+
+#define BUFMAX			2048
+#if (KGDB_GDB_REG_SIZE == 32)
+#define NUMREGBYTES		(90*sizeof(u32))
+#define NUMCRITREGBYTES		(12*sizeof(u32))
+#else
+#define NUMREGBYTES		(90*sizeof(u64))
+#define NUMCRITREGBYTES		(12*sizeof(u64))
+#endif
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	0
+
+extern void arch_kgdb_breakpoint(void);
+extern int kgdb_early_setup;
+extern void *saved_vectors[32];
+extern void handle_exception(struct pt_regs *regs);
+extern void breakinst(void);
+
+#endif				/* __KERNEL__ */
+
+#endif /* __ASM_KGDB_H_ */

include/asm-mips/pci.h

@@ -174,4 +174,6 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 
 extern int pci_probe_only;
 
+extern char * (*pcibios_plat_setup)(char *str);
+
 #endif /* _ASM_PCI_H */

include/asm-mips/txx9/generic.h

@@ -44,5 +44,19 @@ extern struct txx9_board_vec *txx9_board_vec;
 extern int (*txx9_irq_dispatch)(int pending);
 void prom_init_cmdline(void);
 char *prom_getcmdline(void);
+void txx9_wdt_init(unsigned long base);
+void txx9_spi_init(int busid, unsigned long base, int irq);
+void txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr);
+void txx9_sio_init(unsigned long baseaddr, int irq,
+		   unsigned int line, unsigned int sclk, int nocts);
+void prom_putchar(char c);
+#ifdef CONFIG_EARLY_PRINTK
+extern void (*txx9_prom_putchar)(char c);
+void txx9_sio_putchar_init(unsigned long baseaddr);
+#else
+static inline void txx9_sio_putchar_init(unsigned long baseaddr)
+{
+}
+#endif
 
 #endif /* __ASM_TXX9_GENERIC_H */

include/asm-mips/txx9/jmr3927.h

@@ -149,8 +149,6 @@
 
 /* Clocks */
 #define JMR3927_CORECLK	132710400	/* 132.7MHz */
-#define JMR3927_GBUSCLK	(JMR3927_CORECLK / 2)	/* 66.35MHz */
-#define JMR3927_IMCLK	(JMR3927_CORECLK / 4)	/* 33.17MHz */
 
 /*
  * TX3927 Pin Configuration:

include/asm-mips/txx9/pci.h

@@ -33,4 +33,7 @@ enum txx9_pci_err_action {
 };
 extern enum txx9_pci_err_action txx9_pci_err_action;
 
+extern char * (*txx9_board_pcibios_setup)(char *str);
+char *txx9_pcibios_setup(char *str);
+
 #endif /* __ASM_TXX9_PCI_H */

include/asm-mips/txx9/smsc_fdc37m81x.h

@@ -56,7 +56,7 @@
 #define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
 #define SMSC_FDC37M81X_CHIP_ID       0x4d
 
-unsigned long __init smsc_fdc37m81x_init(unsigned long port);
+unsigned long smsc_fdc37m81x_init(unsigned long port);
 
 void smsc_fdc37m81x_config_beg(void);
 

include/asm-mips/txx9/tx3927.h

@@ -8,9 +8,8 @@
 #ifndef __ASM_TXX9_TX3927_H
 #define __ASM_TXX9_TX3927_H
 
-#include <asm/txx9/txx927.h>
-
 #define TX3927_REG_BASE	0xfffe0000UL
+#define TX3927_REG_SIZE	0x00010000
 #define TX3927_SDRAMC_REG	(TX3927_REG_BASE + 0x8000)
 #define TX3927_ROMC_REG		(TX3927_REG_BASE + 0x9000)
 #define TX3927_DMA_REG		(TX3927_REG_BASE + 0xb000)
@@ -236,11 +235,17 @@ struct tx3927_ccfg_reg {
 /* see PCI_STATUS_XXX in linux/pci.h */
 #define PCI_STATUS_NEW_CAP	0x0010
 
+/* bits for ISTAT/IIM */
+#define TX3927_PCIC_IIM_ALL	0x00001600
+
 /* bits for TC */
 #define TX3927_PCIC_TC_OF16E	0x00000020
 #define TX3927_PCIC_TC_IF8E	0x00000010
 #define TX3927_PCIC_TC_OF8E	0x00000008
 
+/* bits for TSTAT/TIM */
+#define TX3927_PCIC_TIM_ALL	0x0003ffff
+
 /* bits for IOBA/MBA */
 /* see PCI_BASE_ADDRESS_XXX in linux/pci.h */
 
@@ -313,12 +318,22 @@ struct tx3927_ccfg_reg {
 #define tx3927_dmaptr		((struct tx3927_dma_reg *)TX3927_DMA_REG)
 #define tx3927_pcicptr		((struct tx3927_pcic_reg *)TX3927_PCIC_REG)
 #define tx3927_ccfgptr		((struct tx3927_ccfg_reg *)TX3927_CCFG_REG)
-#define tx3927_tmrptr(ch)	((struct txx927_tmr_reg *)TX3927_TMR_REG(ch))
 #define tx3927_sioptr(ch)	((struct txx927_sio_reg *)TX3927_SIO_REG(ch))
 #define tx3927_pioptr		((struct txx9_pio_reg __iomem *)TX3927_PIO_REG)
 
+#define TX3927_REV_PCODE()	(tx3927_ccfgptr->crir >> 16)
+#define TX3927_ROMC_BA(ch)	(tx3927_romcptr->cr[(ch)] & 0xfff00000)
+#define TX3927_ROMC_SIZE(ch)	\
+	(0x00100000 << ((tx3927_romcptr->cr[(ch)] >> 8) & 0xf))
+
+void tx3927_wdt_init(void);
+void tx3927_setup(void);
+void tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr);
+void tx3927_sio_init(unsigned int sclk, unsigned int cts_mask);
 struct pci_controller;
-void __init tx3927_pcic_setup(struct pci_controller *channel,
+void tx3927_pcic_setup(struct pci_controller *channel,
 		       unsigned long sdram_size, int extarb);
+void tx3927_setup_pcierr_irq(void);
+void tx3927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX3927_H */

include/asm-mips/txx9/tx4927.h

@@ -243,12 +243,13 @@ static inline void tx4927_ccfg_change(__u64 change, __u64 new)
 }
 
 unsigned int tx4927_get_mem_size(void);
-void tx4927_wdr_init(void);
+void tx4927_wdt_init(void);
 void tx4927_setup(void);
 void tx4927_time_init(unsigned int tmrnr);
-void tx4927_setup_serial(void);
+void tx4927_sio_init(unsigned int sclk, unsigned int cts_mask);
 int tx4927_report_pciclk(void);
 int tx4927_pciclk66_setup(void);
+void tx4927_setup_pcierr_irq(void);
 void tx4927_irq_init(void);
 
 #endif /* __ASM_TXX9_TX4927_H */

include/asm-mips/txx9/tx4927pcic.h

@@ -10,6 +10,7 @@
 #define __ASM_TXX9_TX4927PCIC_H
 
 #include <linux/pci.h>
+#include <linux/irqreturn.h>
 
 struct tx4927_pcic_reg {
 	u32 pciid;
@@ -192,8 +193,11 @@ struct tx4927_pcic_reg {
 
 struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
 	struct pci_controller *channel);
-void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+void tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
 		       struct pci_controller *channel, int extarb);
 void tx4927_report_pcic_status(void);
+char *tx4927_pcibios_setup(char *str);
+void tx4927_dump_pcic_settings(void);
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id);
 
 #endif /* __ASM_TXX9_TX4927PCIC_H */

include/asm-mips/txx9/tx4938.h

@@ -276,15 +276,18 @@ struct tx4938_ccfg_reg {
 #define TX4938_EBUSC_SIZE(ch)	TX4927_EBUSC_SIZE(ch)
 
 #define tx4938_get_mem_size() tx4927_get_mem_size()
-void tx4938_wdr_init(void);
+void tx4938_wdt_init(void);
 void tx4938_setup(void);
 void tx4938_time_init(unsigned int tmrnr);
-void tx4938_setup_serial(void);
+void tx4938_sio_init(unsigned int sclk, unsigned int cts_mask);
+void tx4938_spi_init(int busid);
+void tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1);
 int tx4938_report_pciclk(void);
 void tx4938_report_pci1clk(void);
 int tx4938_pciclk66_setup(void);
 struct pci_dev;
 int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot);
+void tx4938_setup_pcierr_irq(void);
 void tx4938_irq_init(void);
 
 #endif

include/asm-mips/txx9/txx927.h

-/*
- * Common definitions for TX3927/TX4927
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Toshiba Corporation
- */
-#ifndef __ASM_TXX9_TXX927_H
-#define __ASM_TXX9_TXX927_H
-
-struct txx927_sio_reg {
-	volatile unsigned long lcr;
-	volatile unsigned long dicr;
-	volatile unsigned long disr;
-	volatile unsigned long cisr;
-	volatile unsigned long fcr;
-	volatile unsigned long flcr;
-	volatile unsigned long bgr;
-	volatile unsigned long tfifo;
-	volatile unsigned long rfifo;
-};
-
-/*
- * SIO
- */
-/* SILCR : Line Control */
-#define TXx927_SILCR_SCS_MASK	0x00000060
-#define TXx927_SILCR_SCS_IMCLK	0x00000000
-#define TXx927_SILCR_SCS_IMCLK_BG	0x00000020
-#define TXx927_SILCR_SCS_SCLK	0x00000040
-#define TXx927_SILCR_SCS_SCLK_BG	0x00000060
-#define TXx927_SILCR_UEPS	0x00000010
-#define TXx927_SILCR_UPEN	0x00000008
-#define TXx927_SILCR_USBL_MASK	0x00000004
-#define TXx927_SILCR_USBL_1BIT	0x00000004
-#define TXx927_SILCR_USBL_2BIT	0x00000000
-#define TXx927_SILCR_UMODE_MASK	0x00000003
-#define TXx927_SILCR_UMODE_8BIT	0x00000000
-#define TXx927_SILCR_UMODE_7BIT	0x00000001
-
-/* SIDICR : DMA/Int. Control */
-#define TXx927_SIDICR_TDE	0x00008000
-#define TXx927_SIDICR_RDE	0x00004000
-#define TXx927_SIDICR_TIE	0x00002000
-#define TXx927_SIDICR_RIE	0x00001000
-#define TXx927_SIDICR_SPIE	0x00000800
-#define TXx927_SIDICR_CTSAC	0x00000600
-#define TXx927_SIDICR_STIE_MASK	0x0000003f
-#define TXx927_SIDICR_STIE_OERS		0x00000020
-#define TXx927_SIDICR_STIE_CTSS		0x00000010
-#define TXx927_SIDICR_STIE_RBRKD	0x00000008
-#define TXx927_SIDICR_STIE_TRDY		0x00000004
-#define TXx927_SIDICR_STIE_TXALS	0x00000002
-#define TXx927_SIDICR_STIE_UBRKD	0x00000001
-
-/* SIDISR : DMA/Int. Status */
-#define TXx927_SIDISR_UBRK	0x00008000
-#define TXx927_SIDISR_UVALID	0x00004000
-#define TXx927_SIDISR_UFER	0x00002000
-#define TXx927_SIDISR_UPER	0x00001000
-#define TXx927_SIDISR_UOER	0x00000800
-#define TXx927_SIDISR_ERI	0x00000400
-#define TXx927_SIDISR_TOUT	0x00000200
-#define TXx927_SIDISR_TDIS	0x00000100
-#define TXx927_SIDISR_RDIS	0x00000080
-#define TXx927_SIDISR_STIS	0x00000040
-#define TXx927_SIDISR_RFDN_MASK	0x0000001f
-
-/* SICISR : Change Int. Status */
-#define TXx927_SICISR_OERS	0x00000020
-#define TXx927_SICISR_CTSS	0x00000010
-#define TXx927_SICISR_RBRKD	0x00000008
-#define TXx927_SICISR_TRDY	0x00000004
-#define TXx927_SICISR_TXALS	0x00000002
-#define TXx927_SICISR_UBRKD	0x00000001
-
-/* SIFCR : FIFO Control */
-#define TXx927_SIFCR_SWRST	0x00008000
-#define TXx927_SIFCR_RDIL_MASK	0x00000180
-#define TXx927_SIFCR_RDIL_1	0x00000000
-#define TXx927_SIFCR_RDIL_4	0x00000080
-#define TXx927_SIFCR_RDIL_8	0x00000100
-#define TXx927_SIFCR_RDIL_12	0x00000180
-#define TXx927_SIFCR_RDIL_MAX	0x00000180
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_MASK	0x00000018
-#define TXx927_SIFCR_TDIL_1	0x00000000
-#define TXx927_SIFCR_TDIL_4	0x00000001
-#define TXx927_SIFCR_TDIL_8	0x00000010
-#define TXx927_SIFCR_TDIL_MAX	0x00000010
-#define TXx927_SIFCR_TFRST	0x00000004
-#define TXx927_SIFCR_RFRST	0x00000002
-#define TXx927_SIFCR_FRSTE	0x00000001
-#define TXx927_SIO_TX_FIFO	8
-#define TXx927_SIO_RX_FIFO	16
-
-/* SIFLCR : Flow Control */
-#define TXx927_SIFLCR_RCS	0x00001000
-#define TXx927_SIFLCR_TES	0x00000800
-#define TXx927_SIFLCR_RTSSC	0x00000200
-#define TXx927_SIFLCR_RSDE	0x00000100
-#define TXx927_SIFLCR_TSDE	0x00000080
-#define TXx927_SIFLCR_RTSTL_MASK	0x0000001e
-#define TXx927_SIFLCR_RTSTL_MAX	0x0000001e
-#define TXx927_SIFLCR_TBRK	0x00000001
-
-/* SIBGR : Baudrate Control */
-#define TXx927_SIBGR_BCLK_MASK	0x00000300
-#define TXx927_SIBGR_BCLK_T0	0x00000000
-#define TXx927_SIBGR_BCLK_T2	0x00000100
-#define TXx927_SIBGR_BCLK_T4	0x00000200
-#define TXx927_SIBGR_BCLK_T6	0x00000300
-#define TXx927_SIBGR_BRD_MASK	0x000000ff
-
-/*
- * PIO
- */
-
-#endif /* __ASM_TXX9_TXX927_H */

include/asm-mips/txx9irq.h

@@ -14,8 +14,12 @@
 #ifdef CONFIG_IRQ_CPU
 #define TXX9_IRQ_BASE	(MIPS_CPU_IRQ_BASE + 8)
 #else
+#ifdef CONFIG_I8259
+#define TXX9_IRQ_BASE	(I8259A_IRQ_BASE + 16)
+#else
 #define TXX9_IRQ_BASE	0
 #endif
+#endif
 
 #ifdef CONFIG_CPU_TX39XX
 #define TXx9_MAX_IR 16