Commit 8d2ef7bd authored by Juuso Oikarinen's avatar Juuso Oikarinen Committed by John W. Linville

wl1271: Disable dynamic PS based on BT co-ext sense events

This patch requests mac80211 to disable dynamic PSM based on sense events
coming from the firmware. Effectively, whenever there is bluetooth traffic,
the mac80211 is forced into full PSM mode.
Signed-off-by: default avatarJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent ca52a5eb
......@@ -415,7 +415,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
JOIN_EVENT_COMPLETE_ID |
DISCONNECT_EVENT_COMPLETE_ID |
RSSI_SNR_TRIGGER_0_EVENT_ID |
PSPOLL_DELIVERY_FAILURE_EVENT_ID;
PSPOLL_DELIVERY_FAILURE_EVENT_ID |
SOFT_GEMINI_SENSE_EVENT_ID;
ret = wl1271_event_unmask(wl);
if (ret < 0) {
......
......@@ -225,6 +225,15 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
return ret;
}
/* disable dynamic PS when requested by the firmware */
if (vector & SOFT_GEMINI_SENSE_EVENT_ID &&
wl->bss_type == BSS_TYPE_STA_BSS) {
if (mbox->soft_gemini_sense_info)
ieee80211_disable_dyn_ps(wl->vif, true);
else
ieee80211_disable_dyn_ps(wl->vif, false);
}
/*
* The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
* filtering) is enabled. Without PSM, the stack will receive all
......
......@@ -54,7 +54,7 @@ static struct conf_drv_settings default_conf = {
[CONF_SG_HV3_MAX_OVERRIDE] = 0,
[CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400,
[CONF_SG_BT_LOAD_RATIO] = 50,
[CONF_SG_AUTO_PS_MODE] = 0,
[CONF_SG_AUTO_PS_MODE] = 1,
[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,
[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,
[CONF_SG_ANTENNA_CONFIGURATION] = 0,
......@@ -937,6 +937,9 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
WARN_ON(wl->state != WL1271_STATE_ON);
/* enable dyn ps just in case (if left on due to fw crash etc) */
ieee80211_disable_dyn_ps(wl->vif, false);
if (test_and_clear_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
mutex_unlock(&wl->mutex);
ieee80211_scan_completed(wl->hw, true);
......@@ -1774,6 +1777,9 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
wl->aid = 0;
/* re-enable dynamic ps - just in case */
ieee80211_disable_dyn_ps(wl->vif, false);
/* revert back to minimum rates for the current band */
wl1271_set_band_rate(wl);
wl->basic_rate = wl1271_min_rate_get(wl);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment