Skip to content

L
linux
Commit 8dbaadb9 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files
Options

staging: comedi: hwdrv_apci1500: introduce z8536_write() 

The Z8536 CIO registers are indirectly written by writing the register offset
to the control register then writing the value to the control register.

Introduce a helper function to write the Z8536 CIO registers.

The registers are written from "normal" code and in the interrupt handler,
spinlock the sequence to protect the indirect register access.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 54c3ef46
Show whitespace changes
Inline Side-by-side
Showing with 250 additions and 809 deletions
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c
View file @ 8dbaadb9
...@@ -143,6 +143,18 @@ static unsigned int z8536_read(struct comedi_device *dev, unsigned int reg) ...@@ -143,6 +143,18 @@ static unsigned int z8536_read(struct comedi_device *dev, unsigned int reg)
return val; return val;
} }
static void z8536_write(struct comedi_device *dev,
unsigned int val, unsigned int reg)
{
struct apci1500_private *devpriv = dev->private;
unsigned long flags;
spin_lock_irqsave(&dev->spinlock, flags);
outb(reg, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(val, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
spin_unlock_irqrestore(&dev->spinlock, flags);
}
/* /*
* An event can be generated for each port. The first event is related to the * An event can be generated for each port. The first event is related to the
* first 8 channels (port 1) and the second to the following 6 channels (port 2) * first 8 channels (port 1) and the second to the following 6 channels (port 2)
...@@ -172,17 +184,13 @@ static int apci1500_di_config(struct comedi_device *dev, ...@@ -172,17 +184,13 @@ static int apci1500_di_config(struct comedi_device *dev,
struct comedi_insn *insn, struct comedi_insn *insn,
unsigned int *data) unsigned int *data)
{ {
struct apci1500_private *devpriv = dev->private;
int i_PatternPolarity = 0, i_PatternTransition = 0, i_PatternMask = 0; int i_PatternPolarity = 0, i_PatternTransition = 0, i_PatternMask = 0;
int i_MaxChannel = 0, i_Count = 0, i_EventMask = 0; int i_MaxChannel = 0, i_Count = 0, i_EventMask = 0;
int i_PatternTransitionCount = 0, i_RegValue; int i_PatternTransitionCount = 0, i_RegValue;
int i; int i;
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Disables the main interrupt on the board */ /* Disables the main interrupt on the board */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
if (data[0] == 1) { if (data[0] == 1) {
i_MaxChannel = 8; i_MaxChannel = 8;
...@@ -292,67 +300,29 @@ static int apci1500_di_config(struct comedi_device *dev, ...@@ -292,67 +300,29 @@ static int apci1500_di_config(struct comedi_device *dev,
} }
} }
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Disable Port A */ /* Disable Port A */
outb(0xF0, z8536_write(dev, 0xf0,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the polarity register of port 1 */
outb(APCI1500_RW_PORT_A_PATTERN_POLARITY,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_PatternPolarity,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the pattern mask register of */
/* port 1 */
outb(APCI1500_RW_PORT_A_PATTERN_MASK,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_PatternMask,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the pattern transition register */
/* of port 1 */
outb(APCI1500_RW_PORT_A_PATTERN_TRANSITION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_PatternTransition,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_A_SPECIFICATION);
/* Selects the mode specification mask */ z8536_write(dev, i_PatternPolarity,
/* register of port 1 */ APCI1500_RW_PORT_A_PATTERN_POLARITY);
outb(APCI1500_RW_PORT_A_SPECIFICATION, z8536_write(dev, i_PatternMask,
devpriv->iobase + APCI1500_RW_PORT_A_PATTERN_MASK);
APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_PatternTransition,
APCI1500_RW_PORT_A_PATTERN_TRANSITION);
/* Port A new mode */ /* Port A new mode */
i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_A_SPECIFICATION);
i_RegValue = (i_RegValue & 0xF9) | data[1] | 0x9; i_RegValue = (i_RegValue & 0xF9) | data[1] | 0x9;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_PORT_A_SPECIFICATION);
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1Status = 1; i_Event1Status = 1;
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Enable Port A */ /* Enable Port A */
outb(0xF4, z8536_write(dev, 0xf4,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"The choice for interrupt logic does not exist\n"); "The choice for interrupt logic does not exist\n");
...@@ -366,81 +336,39 @@ static int apci1500_di_config(struct comedi_device *dev, ...@@ -366,81 +336,39 @@ static int apci1500_di_config(struct comedi_device *dev,
/* Test the event logic */ /* Test the event logic */
if (data[1] == APCI1500_OR) { if (data[1] == APCI1500_OR) {
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Disable Port B */ /* Disable Port B */
outb(0x74, z8536_write(dev, 0x74,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = z8536_read(dev, i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_B_SPECIFICATION); APCI1500_RW_PORT_B_SPECIFICATION);
/* Selects the mode specification mask */
/* register of port B */
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = i_RegValue & 0xF9; i_RegValue = i_RegValue & 0xF9;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_PORT_B_SPECIFICATION);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects error channels 1 and 2 */ /* Selects error channels 1 and 2 */
i_PatternMask = (i_PatternMask | 0xC0); i_PatternMask = (i_PatternMask | 0xC0);
i_PatternPolarity = (i_PatternPolarity | 0xC0); i_PatternPolarity = (i_PatternPolarity | 0xC0);
i_PatternTransition = (i_PatternTransition | 0xC0); i_PatternTransition = (i_PatternTransition | 0xC0);
/* Selects the polarity register of port 2 */ z8536_write(dev, i_PatternPolarity,
outb(APCI1500_RW_PORT_B_PATTERN_POLARITY, APCI1500_RW_PORT_B_PATTERN_POLARITY);
devpriv->iobase + z8536_write(dev, i_PatternTransition,
APCI1500_Z8536_CONTROL_REGISTER); APCI1500_RW_PORT_B_PATTERN_TRANSITION);
outb(i_PatternPolarity, z8536_write(dev, i_PatternMask,
devpriv->iobase + APCI1500_RW_PORT_B_PATTERN_MASK);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the pattern transition register */
/* of port 2 */
outb(APCI1500_RW_PORT_B_PATTERN_TRANSITION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_PatternTransition,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the pattern Mask register */
/* of port 2 */
outb(APCI1500_RW_PORT_B_PATTERN_MASK,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_PatternMask,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = z8536_read(dev, i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_B_SPECIFICATION); APCI1500_RW_PORT_B_SPECIFICATION);
/* Selects the mode specification mask */
/* register of port 2 */
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = (i_RegValue & 0xF9) | 4; i_RegValue = (i_RegValue & 0xF9) | 4;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_PORT_B_SPECIFICATION);
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2Status = 1; i_Event2Status = 1;
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Enable Port B */ /* Enable Port B */
z8536_write(dev, 0xf4,
outb(0xF4, APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"The choice for interrupt logic does not exist\n"); "The choice for interrupt logic does not exist\n");
...@@ -462,7 +390,6 @@ static int apci1500_di_write(struct comedi_device *dev, ...@@ -462,7 +390,6 @@ static int apci1500_di_write(struct comedi_device *dev,
struct comedi_insn *insn, struct comedi_insn *insn,
unsigned int *data) unsigned int *data)
{ {
struct apci1500_private *devpriv = dev->private;
int i_Event1InterruptStatus = 0, i_Event2InterruptStatus = int i_Event1InterruptStatus = 0, i_Event2InterruptStatus =
0, i_RegValue; 0, i_RegValue;
...@@ -476,36 +403,24 @@ static int apci1500_di_write(struct comedi_device *dev, ...@@ -476,36 +403,24 @@ static int apci1500_di_write(struct comedi_device *dev,
if (data[1] == 1) { if (data[1] == 1) {
/* Test if event initialised */ /* Test if event initialised */
if (i_Event1Status == 1) { if (i_Event1Status == 1) {
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Disable Port A */ /* Disable Port A */
outb(0xF0, z8536_write(dev, 0xf0,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of */
/* port 1 */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Allows the pattern interrupt */ /* Allows the pattern interrupt */
outb(0xC0, z8536_write(dev, 0xc0,
devpriv->iobase + APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Enable Port A */ /* Enable Port A */
outb(0xF4, z8536_write(dev, 0xf4,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1InterruptStatus = 1; i_Event1InterruptStatus = 1;
i_RegValue = z8536_read(dev, i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_A_SPECIFICATION); APCI1500_RW_PORT_A_SPECIFICATION);
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorizes the main interrupt on the board */ /* Authorizes the main interrupt on the board */
outb(0xD0, z8536_write(dev, 0xd0,
devpriv->iobase + APCI1500_RW_MASTER_INTERRUPT_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Event 1 not initialised\n"); "Event 1 not initialised\n");
...@@ -515,32 +430,20 @@ static int apci1500_di_write(struct comedi_device *dev, ...@@ -515,32 +430,20 @@ static int apci1500_di_write(struct comedi_device *dev,
if (data[1] == 2) { if (data[1] == 2) {
if (i_Event2Status == 1) { if (i_Event2Status == 1) {
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Disable Port B */ /* Disable Port B */
outb(0x74, z8536_write(dev, 0x74,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of */
/* port 2 */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Allows the pattern interrupt */ /* Allows the pattern interrupt */
outb(0xC0, z8536_write(dev, 0xc0,
devpriv->iobase + APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Enable Port B */ /* Enable Port B */
outb(0xF4, z8536_write(dev, 0xf4,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorizes the main interrupt on the board */ /* Authorizes the main interrupt on the board */
outb(0xD0, z8536_write(dev, 0xd0,
devpriv->iobase + APCI1500_RW_MASTER_INTERRUPT_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 1; i_Event2InterruptStatus = 1;
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
...@@ -565,25 +468,16 @@ static int apci1500_di_write(struct comedi_device *dev, ...@@ -565,25 +468,16 @@ static int apci1500_di_write(struct comedi_device *dev,
if (data[1] == 1) { if (data[1] == 1) {
/* Test if event initialised */ /* Test if event initialised */
if (i_Event1Status == 1) { if (i_Event1Status == 1) {
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Disable Port A */ /* Disable Port A */
outb(0xF0, z8536_write(dev, 0xf0,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of */
/* port 1 */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Inhibits the pattern interrupt */ /* Inhibits the pattern interrupt */
outb(0xE0, z8536_write(dev, 0xe0,
devpriv->iobase + APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Enable Port A */ /* Enable Port A */
outb(0xF4, z8536_write(dev, 0xf4,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
i_Event1InterruptStatus = 0; i_Event1InterruptStatus = 0;
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
...@@ -594,25 +488,16 @@ static int apci1500_di_write(struct comedi_device *dev, ...@@ -594,25 +488,16 @@ static int apci1500_di_write(struct comedi_device *dev,
if (data[1] == 2) { if (data[1] == 2) {
/* Test if event initialised */ /* Test if event initialised */
if (i_Event2Status == 1) { if (i_Event2Status == 1) {
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Disable Port B */ /* Disable Port B */
outb(0x74, z8536_write(dev, 0x74,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of */
/* port 2 */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Inhibits the pattern interrupt */ /* Inhibits the pattern interrupt */
outb(0xE0, z8536_write(dev, 0xe0,
devpriv->iobase + APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Enable Port B */ /* Enable Port B */
outb(0xF4, z8536_write(dev, 0xf4,
devpriv->iobase + APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
APCI1500_Z8536_CONTROL_REGISTER);
i_Event2InterruptStatus = 0; i_Event2InterruptStatus = 0;
} else { } else {
...@@ -656,123 +541,55 @@ static int apci1500_di_read(struct comedi_device *dev, ...@@ -656,123 +541,55 @@ static int apci1500_di_read(struct comedi_device *dev,
outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master configuration control register */ z8536_write(dev, 0xf4, APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0xF4, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the mode specification register of port A */
outb(APCI1500_RW_PORT_A_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the data path polarity register of port A */ z8536_write(dev, 0x10, APCI1500_RW_PORT_A_SPECIFICATION);
outb(APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* High level of port A means 1 */ /* High level of port A means 1 */
outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY);
/* Selects the data direction register of port A */
outb(APCI1500_RW_PORT_A_DATA_DIRECTION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* All bits used as inputs */ /* All bits used as inputs */
outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_DIRECTION);
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
/* Selects the command and status register of port A */ /* Deactivates the interrupt management of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates the interrupt management of port A: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the handshake specification register of port A */
outb(APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the register */ /* Deletes the register */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION);
/* Selects the mode specification register of port B */ z8536_write(dev, 0x10, APCI1500_RW_PORT_B_SPECIFICATION);
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the data path polarity register of port B */
outb(APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* A high level of port B means 1 */ /* A high level of port B means 1 */
outb(0x7F, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x7f, APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY);
/* Selects the data direction register of port B */
outb(APCI1500_RW_PORT_B_DATA_DIRECTION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* All bits used as inputs */ /* All bits used as inputs */
outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xff, APCI1500_RW_PORT_B_DATA_DIRECTION);
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
/* Selects the command and status register of port B */ /* Deactivates the interrupt management of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates the interrupt management of port B: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the handshake specification register of port B */
outb(APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the register */ /* Deletes the register */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION);
/* Selects the data path polarity register of port C */
outb(APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* High level of port C means 1 */ /* High level of port C means 1 */
outb(0x9, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x09, APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY);
/* Selects the data direction register of port C */
outb(APCI1500_RW_PORT_C_DATA_DIRECTION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* All bits used as inputs except channel 1 */ /* All bits used as inputs except channel 1 */
outb(0x0E, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x0e, APCI1500_RW_PORT_C_DATA_DIRECTION);
/* Selects the special IO register of port C */
outb(APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes it */ /* Deletes it */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL);
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR1_CMD_STATUS);
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates the interrupt management of timer 1 */ /* Deactivates the interrupt management of timer 1 */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR1_CMD_STATUS);
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR2_CMD_STATUS);
/* Selects the command and status register of timer 2 */ /* Deactivates Timer 2 interrupt management */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR2_CMD_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates Timer 2 interrupt management: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR3_CMD_STATUS);
/* Selects the command and status register of Timer 3 */ /* Deactivates interrupt management of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR3_CMD_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates interrupt management of timer 3: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes all interrupts */ /* Deletes all interrupts */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
return insn->n; return insn->n;
} }
...@@ -1023,82 +840,34 @@ static int apci1500_timer_config(struct comedi_device *dev, ...@@ -1023,82 +840,34 @@ static int apci1500_timer_config(struct comedi_device *dev,
/* Test the reload value */ /* Test the reload value */
if ((data[3] >= 0) && (data[3] <= 65535)) { if ((data[3] >= 0) && (data[3] <= 65535)) {
if (data[7] == APCI1500_ENABLE if (data[7] == APCI1500_ENABLE ||
|| data[7] == APCI1500_DISABLE) { data[7] == APCI1500_DISABLE) {
/* Selects the mode register of timer/counter 1 */
outb(APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new mode */ /* Writes the new mode */
outb(i_TimerCounterMode, z8536_write(dev, i_TimerCounterMode,
devpriv->iobase + APCI1500_RW_CPT_TMR1_MODE_SPECIFICATION);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the constant register of timer/counter 1 */
outb(APCI1500_RW_CPT_TMR1_TIME_CST_LOW,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the low value */ /* Writes the low value */
z8536_write(dev, data[3],
outb(data[3], APCI1500_RW_CPT_TMR1_TIME_CST_LOW);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the constant register of timer/counter 1 */
outb(APCI1500_RW_CPT_TMR1_TIME_CST_HIGH,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the high value */ /* Writes the high value */
data[3] = data[3] >> 8; data[3] = data[3] >> 8;
outb(data[3], z8536_write(dev, data[3],
devpriv->iobase + APCI1500_RW_CPT_TMR1_TIME_CST_HIGH);
APCI1500_Z8536_CONTROL_REGISTER);
/* Enables timer/counter 1 and triggers timer/counter 1 */
i_MasterConfiguration = z8536_read(dev, i_MasterConfiguration = z8536_read(dev,
APCI1500_RW_MASTER_CONFIGURATION_CONTROL); APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
/* Enables timer/counter 1 and triggers timer/counter 1 */
i_MasterConfiguration = i_MasterConfiguration =
i_MasterConfiguration | 0x40; i_MasterConfiguration | 0x40;
z8536_write(dev, i_MasterConfiguration,
/* Selects the master configuration register */ APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new configuration */
outb(i_MasterConfiguration,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the commands register of */
/* timer/counter 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Disable timer/counter 1 */ /* Disable timer/counter 1 */
z8536_write(dev, 0x00,
outb(0x0, APCI1500_RW_CPT_TMR1_CMD_STATUS);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the commands register of */
/* timer/counter 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Trigger timer/counter 1 */ /* Trigger timer/counter 1 */
outb(0x2, z8536_write(dev, 0x02,
devpriv->iobase + APCI1500_RW_CPT_TMR1_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Error in selection of interrupt enable or disable\n"); "Error in selection of interrupt enable or disable\n");
...@@ -1174,82 +943,34 @@ static int apci1500_timer_config(struct comedi_device *dev, ...@@ -1174,82 +943,34 @@ static int apci1500_timer_config(struct comedi_device *dev,
/* Test the reload value */ /* Test the reload value */
if ((data[3] >= 0) && (data[3] <= 65535)) { if ((data[3] >= 0) && (data[3] <= 65535)) {
if (data[7] == APCI1500_ENABLE if (data[7] == APCI1500_ENABLE ||
|| data[7] == APCI1500_DISABLE) { data[7] == APCI1500_DISABLE) {
/* Selects the mode register of timer/counter 2 */
outb(APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new mode */ /* Writes the new mode */
outb(i_TimerCounterMode, z8536_write(dev, i_TimerCounterMode,
devpriv->iobase + APCI1500_RW_CPT_TMR2_MODE_SPECIFICATION);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the constant register of timer/counter 2 */
outb(APCI1500_RW_CPT_TMR2_TIME_CST_LOW,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the low value */ /* Writes the low value */
z8536_write(dev, data[3],
outb(data[3], APCI1500_RW_CPT_TMR2_TIME_CST_LOW);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the constant register of timer/counter 2 */
outb(APCI1500_RW_CPT_TMR2_TIME_CST_HIGH,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the high value */ /* Writes the high value */
data[3] = data[3] >> 8; data[3] = data[3] >> 8;
outb(data[3], z8536_write(dev, data[3],
devpriv->iobase + APCI1500_RW_CPT_TMR2_TIME_CST_HIGH);
APCI1500_Z8536_CONTROL_REGISTER);
/* Enables timer/counter 2 and triggers timer/counter 2 */
i_MasterConfiguration = z8536_read(dev, i_MasterConfiguration = z8536_read(dev,
APCI1500_RW_MASTER_CONFIGURATION_CONTROL); APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
/* Enables timer/counter 2 and triggers timer/counter 2 */
i_MasterConfiguration = i_MasterConfiguration =
i_MasterConfiguration | 0x20; i_MasterConfiguration | 0x20;
z8536_write(dev, i_MasterConfiguration,
/* Selects the master configuration register */ APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new configuration */
outb(i_MasterConfiguration,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the commands register of */
/* timer/counter 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Disable timer/counter 2 */ /* Disable timer/counter 2 */
z8536_write(dev, 0x00,
outb(0x0, APCI1500_RW_CPT_TMR2_CMD_STATUS);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the commands register of */
/* timer/counter 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Trigger timer/counter 1 */ /* Trigger timer/counter 1 */
outb(0x2, z8536_write(dev, 0x02,
devpriv->iobase + APCI1500_RW_CPT_TMR2_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Error in selection of interrupt enable or disable\n"); "Error in selection of interrupt enable or disable\n");
...@@ -1319,85 +1040,36 @@ static int apci1500_timer_config(struct comedi_device *dev, ...@@ -1319,85 +1040,36 @@ static int apci1500_timer_config(struct comedi_device *dev,
/* Test the reload value */ /* Test the reload value */
if ((data[3] >= 0) && (data[3] <= 65535)) { if ((data[3] >= 0) && (data[3] <= 65535)) {
if (data[7] == APCI1500_ENABLE if (data[7] == APCI1500_ENABLE ||
|| data[7] == APCI1500_DISABLE) { data[7] == APCI1500_DISABLE) {
/* Selects the mode register of watchdog/counter 3 */
outb(APCI1500_RW_CPT_TMR3_MODE_SPECIFICATION,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new mode */ /* Writes the new mode */
outb(i_TimerCounterMode, z8536_write(dev, i_TimerCounterMode,
devpriv->iobase + APCI1500_RW_CPT_TMR3_MODE_SPECIFICATION);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the constant register of watchdog/counter 3 */
outb(APCI1500_RW_CPT_TMR3_TIME_CST_LOW,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the low value */ /* Writes the low value */
z8536_write(dev, data[3],
outb(data[3], APCI1500_RW_CPT_TMR3_TIME_CST_LOW);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the constant register of watchdog/counter 3 */
outb(APCI1500_RW_CPT_TMR3_TIME_CST_HIGH,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the high value */ /* Writes the high value */
data[3] = data[3] >> 8; data[3] = data[3] >> 8;
outb(data[3], z8536_write(dev, data[3],
devpriv->iobase + APCI1500_RW_CPT_TMR3_TIME_CST_HIGH);
APCI1500_Z8536_CONTROL_REGISTER);
/* Enables watchdog/counter 3 and triggers watchdog/counter 3 */
i_MasterConfiguration = z8536_read(dev, i_MasterConfiguration = z8536_read(dev,
APCI1500_RW_MASTER_CONFIGURATION_CONTROL); APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
/* Enables watchdog/counter 3 and triggers watchdog/counter 3 */
i_MasterConfiguration = i_MasterConfiguration =
i_MasterConfiguration | 0x10; i_MasterConfiguration | 0x10;
z8536_write(dev, i_MasterConfiguration,
/* Selects the master configuration register */ APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new configuration */
outb(i_MasterConfiguration,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Test if COUNTER */ /* Test if COUNTER */
if (data[2] == APCI1500_COUNTER) { if (data[2] == APCI1500_COUNTER) {
/* Selects the command register of */
/* watchdog/counter 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Disable the watchdog/counter 3 and starts it */ /* Disable the watchdog/counter 3 and starts it */
outb(0x0, z8536_write(dev, 0x00,
devpriv->iobase + APCI1500_RW_CPT_TMR3_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command register of */
/* watchdog/counter 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Trigger the watchdog/counter 3 and starts it */ /* Trigger the watchdog/counter 3 and starts it */
outb(0x2, z8536_write(dev, 0x02,
devpriv->iobase + APCI1500_RW_CPT_TMR3_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
} }
} else { } else {
...@@ -1436,7 +1108,6 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1436,7 +1108,6 @@ static int apci1500_timer_write(struct comedi_device *dev,
struct comedi_insn *insn, struct comedi_insn *insn,
unsigned int *data) unsigned int *data)
{ {
struct apci1500_private *devpriv = dev->private;
int i_CommandAndStatusValue; int i_CommandAndStatusValue;
switch (data[0]) { switch (data[0]) {
...@@ -1451,13 +1122,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1451,13 +1122,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
/* Starts timer/counter 1 */ /* Starts timer/counter 1 */
i_TimerCounter1Enabled = 1; i_TimerCounter1Enabled = 1;
/* Selects the commands and status register */ z8536_write(dev, i_CommandAndStatusValue,
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS, APCI1500_RW_CPT_TMR1_CMD_STATUS);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Counter/Timer1 not configured\n"); "Counter/Timer1 not configured\n");
...@@ -1466,16 +1132,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1466,16 +1132,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
break; break;
case STOP: case STOP:
/* Stop timer/counter 1 */ /* Stop timer/counter 1 */
z8536_write(dev, 0x00, APCI1500_RW_CPT_TMR1_CMD_STATUS);
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x00,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_TimerCounter1Enabled = 0; i_TimerCounter1Enabled = 0;
break; break;
...@@ -1490,14 +1148,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1490,14 +1148,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
i_CommandAndStatusValue = 0x2; i_CommandAndStatusValue = 0x2;
} }
z8536_write(dev, i_CommandAndStatusValue,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR1_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Counter/Timer1 not configured\n"); "Counter/Timer1 not configured\n");
...@@ -1523,13 +1175,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1523,13 +1175,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
/* Starts timer/counter 2 */ /* Starts timer/counter 2 */
i_TimerCounter2Enabled = 1; i_TimerCounter2Enabled = 1;
/* Selects the commands and status register */ z8536_write(dev, i_CommandAndStatusValue,
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, APCI1500_RW_CPT_TMR2_CMD_STATUS);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Counter/Timer2 not configured\n"); "Counter/Timer2 not configured\n");
...@@ -1538,16 +1185,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1538,16 +1185,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
break; break;
case STOP: case STOP:
/* Stop timer/counter 2 */ /* Stop timer/counter 2 */
z8536_write(dev, 0x00, APCI1500_RW_CPT_TMR2_CMD_STATUS);
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x00,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_TimerCounter2Enabled = 0; i_TimerCounter2Enabled = 0;
break; break;
case TRIGGER: case TRIGGER:
...@@ -1561,14 +1200,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1561,14 +1200,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
i_CommandAndStatusValue = 0x2; i_CommandAndStatusValue = 0x2;
} }
z8536_write(dev, i_CommandAndStatusValue,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR2_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Counter/Timer2 not configured\n"); "Counter/Timer2 not configured\n");
...@@ -1593,14 +1226,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1593,14 +1226,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
/* Starts Watchdog/counter 3 */ /* Starts Watchdog/counter 3 */
i_WatchdogCounter3Enabled = 1; i_WatchdogCounter3Enabled = 1;
/* Selects the commands and status register */ z8536_write(dev, i_CommandAndStatusValue,
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, APCI1500_RW_CPT_TMR3_CMD_STATUS);
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Watchdog/Counter3 not configured\n"); "Watchdog/Counter3 not configured\n");
...@@ -1609,16 +1236,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1609,16 +1236,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
break; break;
case STOP: case STOP:
/* Stop Watchdog/counter 3 */ /* Stop Watchdog/counter 3 */
z8536_write(dev, 0x00, APCI1500_RW_CPT_TMR3_CMD_STATUS);
/* Selects the commands and status register */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x00,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
i_WatchdogCounter3Enabled = 0; i_WatchdogCounter3Enabled = 0;
break; break;
...@@ -1635,14 +1254,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1635,14 +1254,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
i_CommandAndStatusValue = 0x2; i_CommandAndStatusValue = 0x2;
} }
z8536_write(dev, i_CommandAndStatusValue,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR3_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Counter3 not configured\n"); "Counter3 not configured\n");
...@@ -1652,14 +1265,8 @@ static int apci1500_timer_write(struct comedi_device *dev, ...@@ -1652,14 +1265,8 @@ static int apci1500_timer_write(struct comedi_device *dev,
case 1: case 1:
/* triggering Watchdog 3 */ /* triggering Watchdog 3 */
if (i_WatchdogCounter3Init == 1) { if (i_WatchdogCounter3Init == 1) {
z8536_write(dev, 0x06,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR3_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(0x6,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Watchdog 3 not configured\n"); "Watchdog 3 not configured\n");
...@@ -1696,7 +1303,6 @@ static int apci1500_timer_bits(struct comedi_device *dev, ...@@ -1696,7 +1303,6 @@ static int apci1500_timer_bits(struct comedi_device *dev,
struct comedi_insn *insn, struct comedi_insn *insn,
unsigned int *data) unsigned int *data)
{ {
struct apci1500_private *devpriv = dev->private;
int i_CommandAndStatusValue; int i_CommandAndStatusValue;
switch (data[0]) { switch (data[0]) {
...@@ -1712,14 +1318,8 @@ static int apci1500_timer_bits(struct comedi_device *dev, ...@@ -1712,14 +1318,8 @@ static int apci1500_timer_bits(struct comedi_device *dev,
i_CommandAndStatusValue = 0x8; i_CommandAndStatusValue = 0x8;
} }
z8536_write(dev, i_CommandAndStatusValue,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR1_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] = z8536_read(dev, data[0] = z8536_read(dev,
APCI1500_R_CPT_TMR1_VALUE_HIGH); APCI1500_R_CPT_TMR1_VALUE_HIGH);
...@@ -1745,14 +1345,8 @@ static int apci1500_timer_bits(struct comedi_device *dev, ...@@ -1745,14 +1345,8 @@ static int apci1500_timer_bits(struct comedi_device *dev,
i_CommandAndStatusValue = 0x8; i_CommandAndStatusValue = 0x8;
} }
z8536_write(dev, i_CommandAndStatusValue,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR2_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] = z8536_read(dev, data[0] = z8536_read(dev,
APCI1500_R_CPT_TMR2_VALUE_HIGH); APCI1500_R_CPT_TMR2_VALUE_HIGH);
...@@ -1778,14 +1372,8 @@ static int apci1500_timer_bits(struct comedi_device *dev, ...@@ -1778,14 +1372,8 @@ static int apci1500_timer_bits(struct comedi_device *dev,
i_CommandAndStatusValue = 0x8; i_CommandAndStatusValue = 0x8;
} }
z8536_write(dev, i_CommandAndStatusValue,
/* Selects the commands and status register */ APCI1500_RW_CPT_TMR3_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
outb(i_CommandAndStatusValue,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
data[0] = z8536_read(dev, data[0] = z8536_read(dev,
APCI1500_R_CPT_TMR3_VALUE_HIGH); APCI1500_R_CPT_TMR3_VALUE_HIGH);
...@@ -1852,75 +1440,45 @@ static int apci1500_do_bits(struct comedi_device *dev, ...@@ -1852,75 +1440,45 @@ static int apci1500_do_bits(struct comedi_device *dev,
} }
} }
i_RegValue = z8536_read(dev, APCI1500_RW_PORT_B_SPECIFICATION);
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Writes the new configuration (APCI1500_OR) */ /* Writes the new configuration (APCI1500_OR) */
i_RegValue = z8536_read(dev, APCI1500_RW_PORT_B_SPECIFICATION);
i_RegValue = (i_RegValue & 0xF9) | APCI1500_OR; i_RegValue = (i_RegValue & 0xF9) | APCI1500_OR;
z8536_write(dev, i_RegValue, APCI1500_RW_PORT_B_SPECIFICATION);
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorises the interrupt on the board */ /* Authorises the interrupt on the board */
outb(0xC0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xc0, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
/* Selects the pattern polarity register of port B */
outb(APCI1500_RW_PORT_B_PATTERN_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(i_Constant, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the pattern transition register of port B */
outb(APCI1500_RW_PORT_B_PATTERN_TRANSITION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(i_Constant, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the pattern mask register of port B */
outb(APCI1500_RW_PORT_B_PATTERN_MASK,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(i_Constant, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
i_RegValue = z8536_read(dev, APCI1500_RW_PORT_A_COMMAND_AND_STATUS); z8536_write(dev, i_Constant, APCI1500_RW_PORT_B_PATTERN_POLARITY);
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, z8536_write(dev, i_Constant, APCI1500_RW_PORT_B_PATTERN_TRANSITION);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_Constant, APCI1500_RW_PORT_B_PATTERN_MASK);
/* Deletes the interrupt of port A */
/* Deletes the interrupt of port A */
i_RegValue = z8536_read(dev, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_RegValue, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
i_RegValue = z8536_read(dev, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of port B */
/* Deletes the interrupt of port B */
i_RegValue = z8536_read(dev, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_RegValue, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR1_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of timer 1 */ /* Deletes the interrupt of timer 1 */
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR1_CMD_STATUS);
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_RegValue, APCI1500_RW_CPT_TMR1_CMD_STATUS);
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR2_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of timer 2 */ /* Deletes the interrupt of timer 2 */
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR2_CMD_STATUS);
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_RegValue, APCI1500_RW_CPT_TMR2_CMD_STATUS);
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR3_CMD_STATUS);
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of timer 3 */ /* Deletes the interrupt of timer 3 */
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR3_CMD_STATUS);
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, i_RegValue, APCI1500_RW_CPT_TMR3_CMD_STATUS);
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorizes the main interrupt on the board */ /* Authorizes the main interrupt on the board */
outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xd0, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
/* Enables the PCI interrupt */ /* Enables the PCI interrupt */
outl(0x3000, devpriv->i_IobaseAmcc + 0x38); outl(0x3000, devpriv->i_IobaseAmcc + 0x38);
...@@ -1953,15 +1511,10 @@ static irqreturn_t apci1500_interrupt(int irq, void *d) ...@@ -1953,15 +1511,10 @@ static irqreturn_t apci1500_interrupt(int irq, void *d)
i_RegValue = z8536_read(dev, i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_A_COMMAND_AND_STATUS); APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
if ((i_RegValue & 0x60) == 0x60) { if ((i_RegValue & 0x60) == 0x60) {
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of port A */ /* Deletes the interrupt of port A */
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 1; i_InterruptMask = i_InterruptMask | 1;
if (i_Logic == APCI1500_OR_PRIORITY) { if (i_Logic == APCI1500_OR_PRIORITY) {
i_RegValue = z8536_read(dev, i_RegValue = z8536_read(dev,
...@@ -1980,15 +1533,10 @@ static irqreturn_t apci1500_interrupt(int irq, void *d) ...@@ -1980,15 +1533,10 @@ static irqreturn_t apci1500_interrupt(int irq, void *d)
i_RegValue = z8536_read(dev, i_RegValue = z8536_read(dev,
APCI1500_RW_PORT_B_COMMAND_AND_STATUS); APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
if ((i_RegValue & 0x60) == 0x60) { if ((i_RegValue & 0x60) == 0x60) {
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of port B */ /* Deletes the interrupt of port B */
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
/* Reads port B */ /* Reads port B */
i_RegValue = i_RegValue =
inb((unsigned int) devpriv->iobase + inb((unsigned int) devpriv->iobase +
...@@ -2018,43 +1566,28 @@ static irqreturn_t apci1500_interrupt(int irq, void *d) ...@@ -2018,43 +1566,28 @@ static irqreturn_t apci1500_interrupt(int irq, void *d)
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR1_CMD_STATUS); i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR1_CMD_STATUS);
if ((i_RegValue & 0x60) == 0x60) { if ((i_RegValue & 0x60) == 0x60) {
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of timer 1 */ /* Deletes the interrupt of timer 1 */
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_CPT_TMR1_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 4; i_InterruptMask = i_InterruptMask | 4;
} }
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR2_CMD_STATUS); i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR2_CMD_STATUS);
if ((i_RegValue & 0x60) == 0x60) { if ((i_RegValue & 0x60) == 0x60) {
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of timer 2 */ /* Deletes the interrupt of timer 2 */
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_CPT_TMR2_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
i_InterruptMask = i_InterruptMask | 8; i_InterruptMask = i_InterruptMask | 8;
} }
i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR3_CMD_STATUS); i_RegValue = z8536_read(dev, APCI1500_RW_CPT_TMR3_CMD_STATUS);
if ((i_RegValue & 0x60) == 0x60) { if ((i_RegValue & 0x60) == 0x60) {
/* Selects the command and status register of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase +
APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the interrupt of timer 3 */ /* Deletes the interrupt of timer 3 */
i_RegValue = (i_RegValue & 0x0F) | 0x20; i_RegValue = (i_RegValue & 0x0F) | 0x20;
outb(i_RegValue, z8536_write(dev, i_RegValue,
devpriv->iobase + APCI1500_RW_CPT_TMR3_CMD_STATUS);
APCI1500_Z8536_CONTROL_REGISTER);
if (i_CounterLogic == APCI1500_COUNTER) if (i_CounterLogic == APCI1500_COUNTER)
i_InterruptMask = i_InterruptMask | 0x10; i_InterruptMask = i_InterruptMask | 0x10;
else else
...@@ -2062,13 +1595,9 @@ static irqreturn_t apci1500_interrupt(int irq, void *d) ...@@ -2062,13 +1595,9 @@ static irqreturn_t apci1500_interrupt(int irq, void *d)
} }
send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */ send_sig(SIGIO, devpriv->tsk_Current, 0); /* send signal to the sample */
/* Enable all Interrupts */
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Authorizes the main interrupt on the board */ /* Authorizes the main interrupt on the board */
outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xd0, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
} else { } else {
dev_warn(dev->class_dev, dev_warn(dev->class_dev,
"Interrupt from unknown source\n"); "Interrupt from unknown source\n");
...@@ -2105,155 +1634,67 @@ static int apci1500_reset(struct comedi_device *dev) ...@@ -2105,155 +1634,67 @@ static int apci1500_reset(struct comedi_device *dev)
outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); outb(1, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master configuration control register */ z8536_write(dev, 0xf4, APCI1500_RW_MASTER_CONFIGURATION_CONTROL);
outb(APCI1500_RW_MASTER_CONFIGURATION_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0xF4, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the mode specification register of port A */ z8536_write(dev, 0x10, APCI1500_RW_PORT_A_SPECIFICATION);
outb(APCI1500_RW_PORT_A_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the data path polarity register of port A */
outb(APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* High level of port A means 1 */ /* High level of port A means 1 */
outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_PCITCH_POLARITY);
/* Selects the data direction register of port A */
outb(APCI1500_RW_PORT_A_DATA_DIRECTION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* All bits used as inputs */ /* All bits used as inputs */
outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xff, APCI1500_RW_PORT_A_DATA_DIRECTION);
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
/* Selects the command and status register of port A */ /* Deactivates the interrupt management of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates the interrupt management of port A: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the handshake specification register of port A */
outb(APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the register */ /* Deletes the register */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_PORT_A_HANDSHAKE_SPECIFICATION);
/* Selects the mode specification register of port B */ z8536_write(dev, 0x10, APCI1500_RW_PORT_B_SPECIFICATION);
outb(APCI1500_RW_PORT_B_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
outb(0x10, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the data path polarity register of port B */
outb(APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* A high level of port B means 1 */ /* A high level of port B means 1 */
outb(0x7F, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x7f, APCI1500_RW_PORT_B_DATA_PCITCH_POLARITY);
/* Selects the data direction register of port B */
outb(APCI1500_RW_PORT_B_DATA_DIRECTION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* All bits used as inputs */ /* All bits used as inputs */
outb(0xFF, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xff, APCI1500_RW_PORT_B_DATA_DIRECTION);
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
/* Selects the command and status register of port B */ /* Deactivates the interrupt management of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates the interrupt management of port B: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the handshake specification register of port B */
outb(APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes the register */ /* Deletes the register */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_PORT_B_HANDSHAKE_SPECIFICATION);
/* Selects the data path polarity register of port C */
outb(APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* High level of port C means 1 */ /* High level of port C means 1 */
outb(0x9, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x09, APCI1500_RW_PORT_C_DATA_PCITCH_POLARITY);
/* Selects the data direction register of port C */
outb(APCI1500_RW_PORT_C_DATA_DIRECTION,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* All bits used as inputs except channel 1 */ /* All bits used as inputs except channel 1 */
outb(0x0E, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x0e, APCI1500_RW_PORT_C_DATA_DIRECTION);
/* Selects the special IO register of port C */
outb(APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes it */ /* Deletes it */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_PORT_C_SPECIAL_IO_CONTROL);
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR1_CMD_STATUS);
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates the interrupt management of timer 1 */ /* Deactivates the interrupt management of timer 1 */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR1_CMD_STATUS);
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR2_CMD_STATUS);
/* Selects the command and status register of timer 2 */ /* Deactivates Timer 2 interrupt management */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR2_CMD_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates Timer 2 interrupt management: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes IP and IUS */ /* Deletes IP and IUS */
outb(0x20, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x20, APCI1500_RW_CPT_TMR3_CMD_STATUS);
/* Selects the command and status register of Timer 3 */ /* Deactivates interrupt management of timer 3 */
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS, z8536_write(dev, 0xe0, APCI1500_RW_CPT_TMR3_CMD_STATUS);
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates interrupt management of timer 3: */
outb(0xE0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deletes all interrupts */ /* Deletes all interrupts */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
/* reset all the digital outputs */ /* reset all the digital outputs */
outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP); outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
/* Disable the board interrupt */
/* Selects the master interrupt control register */
outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates all interrupts */
outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of port A */
outb(APCI1500_RW_PORT_A_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of port B */
outb(APCI1500_RW_PORT_B_COMMAND_AND_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 1 */
outb(APCI1500_RW_CPT_TMR1_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 2 */
outb(APCI1500_RW_CPT_TMR2_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Selects the command and status register of timer 3*/
outb(APCI1500_RW_CPT_TMR3_CMD_STATUS,
devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
/* Deactivates all interrupts */ /* Deactivates all interrupts */
outb(0x00, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER); z8536_write(dev, 0x00, APCI1500_RW_MASTER_INTERRUPT_CONTROL);
z8536_write(dev, 0x00, APCI1500_RW_PORT_A_COMMAND_AND_STATUS);
z8536_write(dev, 0x00, APCI1500_RW_PORT_B_COMMAND_AND_STATUS);
z8536_write(dev, 0x00, APCI1500_RW_CPT_TMR1_CMD_STATUS);
z8536_write(dev, 0x00, APCI1500_RW_CPT_TMR2_CMD_STATUS);
z8536_write(dev, 0x00, APCI1500_RW_CPT_TMR3_CMD_STATUS);
return 0; return 0;
} }
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7