Commit 8e694cd2 authored by Iyappan Subramanian's avatar Iyappan Subramanian Committed by David S. Miller

dtb: xgene: Add MDIO node

Added mdio node for mdio driver.  Also added phy-handle
reference to the ethernet nodes.

Removed unused clock node from storm sgenet1.
Signed-off-by: default avatarIyappan Subramanian <isubramanian@apm.com>
Tested-by: default avatarFushen Chen <fchen@apm.com>
Tested-by: default avatarToan Le <toanle@apm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 52d1fd99
......@@ -83,3 +83,9 @@ rtc68: rtc@68 {
status = "ok";
};
};
&mdio {
sgenet0phy: phy@0 {
reg = <0x0>;
};
};
......@@ -79,3 +79,15 @@ &xgenet {
&mmc0 {
status = "ok";
};
&mdio {
menet0phy: phy@3 {
reg = <0x3>;
};
sgenet0phy: phy@4 {
reg = <0x4>;
};
sgenet1phy: phy@5 {
reg = <0x5>;
};
};
......@@ -625,10 +625,18 @@ sbgpio: gpio@17001000{
apm,irq-start = <8>;
};
mdio: mdio@1f610000 {
compatible = "apm,xgene-mdio-xfi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1f610000 0x0 0xd100>;
clocks = <&xge0clk 0>;
};
sgenet0: ethernet@1f610000 {
compatible = "apm,xgene2-sgenet";
status = "disabled";
reg = <0x0 0x1f610000 0x0 0x10000>,
reg = <0x0 0x1f610000 0x0 0xd100>,
<0x0 0x1f600000 0x0 0Xd100>,
<0x0 0x20000000 0x0 0X20000>;
interrupts = <0 96 4>,
......@@ -637,6 +645,7 @@ sgenet0: ethernet@1f610000 {
clocks = <&xge0clk 0>;
local-mac-address = [00 01 73 00 00 01];
phy-connection-type = "sgmii";
phy-handle = <&sgenet0phy>;
};
xgenet1: ethernet@1f620000 {
......
......@@ -237,20 +237,11 @@ sge0clk: sge0clk@1f21c000 {
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
csr-mask = <0x3>;
csr-mask = <0xa>;
enable-mask = <0xf>;
clock-output-names = "sge0clk";
};
sge1clk: sge1clk@1f21c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
clocks = <&socplldiv2 0>;
reg = <0x0 0x1f21c000 0x0 0x1000>;
reg-names = "csr-reg";
csr-mask = <0xc>;
clock-output-names = "sge1clk";
};
xge0clk: xge0clk@1f61c000 {
compatible = "apm,xgene-device-clock";
#clock-cells = <1>;
......@@ -921,6 +912,14 @@ rtc: rtc@10510000 {
clocks = <&rtcclk 0>;
};
mdio: mdio@17020000 {
compatible = "apm,xgene-mdio-rgmii";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x17020000 0x0 0xd100>;
clocks = <&menetclk 0>;
};
menet: ethernet@17020000 {
compatible = "apm,xgene-enet";
status = "disabled";
......@@ -934,7 +933,7 @@ menet: ethernet@17020000 {
/* mac address will be overwritten by the bootloader */
local-mac-address = [00 00 00 00 00 00];
phy-connection-type = "rgmii";
phy-handle = <&menetphy>;
phy-handle = <&menet0phy>,<&menetphy>;
mdio {
compatible = "apm,xgene-mdio";
#address-cells = <1>;
......@@ -960,6 +959,7 @@ sgenet0: ethernet@1f210000 {
clocks = <&sge0clk 0>;
local-mac-address = [00 00 00 00 00 00];
phy-connection-type = "sgmii";
phy-handle = <&sgenet0phy>;
};
sgenet1: ethernet@1f210030 {
......@@ -973,9 +973,9 @@ sgenet1: ethernet@1f210030 {
<0x0 0xAD 0x4>;
port-id = <1>;
dma-coherent;
clocks = <&sge1clk 0>;
local-mac-address = [00 00 00 00 00 00];
phy-connection-type = "sgmii";
phy-handle = <&sgenet1phy>;
};
xgenet: ethernet@1f610000 {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment