Split drivers/pci/pci.c into smaller, bite-size chunks

drivers/pci/Makefile

@@ -11,9 +11,11 @@
 
 O_TARGET := driver.o
 
-export-objs := pci.o
+obj-y		+= access.o probe.o pci.o pool.o quirks.o \
+			compat.o names.o pci-driver.o search.o
+obj-$(CONFIG_PM)  += power.o
+obj-$(CONFIG_HOTPLUG)  += hotplug.o
 
-obj-$(CONFIG_PCI) += pci.o quirks.o compat.o names.o pci-driver.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
 ifndef CONFIG_SPARC64
@@ -35,6 +37,8 @@ ifndef CONFIG_X86
 obj-y += syscall.o
 endif
 
+export-objs := $(obj-y)
+
 include $(TOPDIR)/Rules.make
 
 names.o: names.c devlist.h classlist.h

drivers/pci/access.c

+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+
+static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
+
+/*
+ *  Wrappers for all PCI configuration access functions.  They just check
+ *  alignment, do locking and call the low-level functions pointed to
+ *  by pci_dev->ops.
+ */
+
+#define PCI_byte_BAD 0
+#define PCI_word_BAD (pos & 1)
+#define PCI_dword_BAD (pos & 3)
+
+#define PCI_OP(rw,size,type) \
+int pci_##rw##_config_##size (struct pci_dev *dev, int pos, type value) \
+{									\
+	int res;							\
+	unsigned long flags;						\
+	if (PCI_##size##_BAD) return PCIBIOS_BAD_REGISTER_NUMBER;	\
+	spin_lock_irqsave(&pci_lock, flags);				\
+	res = dev->bus->ops->rw##_##size(dev, pos, value);		\
+	spin_unlock_irqrestore(&pci_lock, flags);			\
+	return res;							\
+}
+
+PCI_OP(read, byte, u8 *)
+PCI_OP(read, word, u16 *)
+PCI_OP(read, dword, u32 *)
+PCI_OP(write, byte, u8)
+PCI_OP(write, word, u16)
+PCI_OP(write, dword, u32)
+
+EXPORT_SYMBOL(pci_read_config_byte);
+EXPORT_SYMBOL(pci_read_config_word);
+EXPORT_SYMBOL(pci_read_config_dword);
+EXPORT_SYMBOL(pci_write_config_byte);
+EXPORT_SYMBOL(pci_write_config_word);
+EXPORT_SYMBOL(pci_write_config_dword);

drivers/pci/hotplug.c

+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/kmod.h>		/* for hotplug_path */
+
+extern struct list_head pci_drivers;
+extern int pci_announce_device(struct pci_driver *drv, struct pci_dev *dev);
+
+#ifndef FALSE
+#define FALSE	(0)
+#define TRUE	(!FALSE)
+#endif
+
+static void
+run_sbin_hotplug(struct pci_dev *pdev, int insert)
+{
+	int i;
+	char *argv[3], *envp[8];
+	char id[20], sub_id[24], bus_id[24], class_id[20];
+
+	if (!hotplug_path[0])
+		return;
+
+	sprintf(class_id, "PCI_CLASS=%04X", pdev->class);
+	sprintf(id, "PCI_ID=%04X:%04X", pdev->vendor, pdev->device);
+	sprintf(sub_id, "PCI_SUBSYS_ID=%04X:%04X", pdev->subsystem_vendor, pdev->subsystem_device);
+	sprintf(bus_id, "PCI_SLOT_NAME=%s", pdev->slot_name);
+
+	i = 0;
+	argv[i++] = hotplug_path;
+	argv[i++] = "pci";
+	argv[i] = 0;
+
+	i = 0;
+	/* minimal command environment */
+	envp[i++] = "HOME=/";
+	envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+	
+	/* other stuff we want to pass to /sbin/hotplug */
+	envp[i++] = class_id;
+	envp[i++] = id;
+	envp[i++] = sub_id;
+	envp[i++] = bus_id;
+	if (insert)
+		envp[i++] = "ACTION=add";
+	else
+		envp[i++] = "ACTION=remove";
+	envp[i] = 0;
+
+	call_usermodehelper (argv [0], argv, envp);
+}
+
+/**
+ * pci_announce_device_to_drivers - tell the drivers a new device has appeared
+ * @dev: the device that has shown up
+ *
+ * Notifys the drivers that a new device has appeared, and also notifys
+ * userspace through /sbin/hotplug.
+ */
+void
+pci_announce_device_to_drivers(struct pci_dev *dev)
+{
+	struct list_head *ln;
+
+	for(ln=pci_drivers.next; ln != &pci_drivers; ln=ln->next) {
+		struct pci_driver *drv = list_entry(ln, struct pci_driver, node);
+		if (drv->remove && pci_announce_device(drv, dev))
+			break;
+	}
+
+	/* notify userspace of new hotplug device */
+	run_sbin_hotplug(dev, TRUE);
+}
+
+/**
+ * pci_insert_device - insert a hotplug device
+ * @dev: the device to insert
+ * @bus: where to insert it
+ *
+ * Add a new device to the device lists and notify userspace (/sbin/hotplug).
+ */
+void
+pci_insert_device(struct pci_dev *dev, struct pci_bus *bus)
+{
+	list_add_tail(&dev->bus_list, &bus->devices);
+	list_add_tail(&dev->global_list, &pci_devices);
+#ifdef CONFIG_PROC_FS
+	pci_proc_attach_device(dev);
+#endif
+	pci_announce_device_to_drivers(dev);
+}
+
+static void
+pci_free_resources(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+		struct resource *res = dev->resource + i;
+		if (res->parent)
+			release_resource(res);
+	}
+}
+
+/**
+ * pci_remove_device - remove a hotplug device
+ * @dev: the device to remove
+ *
+ * Delete the device structure from the device lists and 
+ * notify userspace (/sbin/hotplug).
+ */
+void
+pci_remove_device(struct pci_dev *dev)
+{
+	if (dev->driver) {
+		if (dev->driver->remove)
+			dev->driver->remove(dev);
+		dev->driver = NULL;
+	}
+	list_del(&dev->bus_list);
+	list_del(&dev->global_list);
+	pci_free_resources(dev);
+#ifdef CONFIG_PROC_FS
+	pci_proc_detach_device(dev);
+#endif
+
+	/* notify userspace of hotplug device removal */
+	run_sbin_hotplug(dev, FALSE);
+}
+
+EXPORT_SYMBOL(pci_insert_device);
+EXPORT_SYMBOL(pci_remove_device);
+EXPORT_SYMBOL(pci_announce_device_to_drivers);

drivers/pci/pci-driver.c

 /*
- * drivers/pci/pci-driver.c - default PCI driver.
+ * drivers/pci/pci-driver.c
  *
  */
 
 #include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ *  Registration of PCI drivers and handling of hot-pluggable devices.
+ */
+
+LIST_HEAD(pci_drivers);
+
+/**
+ * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure
+ * @ids: array of PCI device id structures to search in
+ * @dev: the PCI device structure to match against
+ * 
+ * Used by a driver to check whether a PCI device present in the
+ * system is in its list of supported devices.Returns the matching
+ * pci_device_id structure or %NULL if there is no match.
+ */
+const struct pci_device_id *
+pci_match_device(const struct pci_device_id *ids, const struct pci_dev *dev)
+{
+	while (ids->vendor || ids->subvendor || ids->class_mask) {
+		if ((ids->vendor == PCI_ANY_ID || ids->vendor == dev->vendor) &&
+		    (ids->device == PCI_ANY_ID || ids->device == dev->device) &&
+		    (ids->subvendor == PCI_ANY_ID || ids->subvendor == dev->subsystem_vendor) &&
+		    (ids->subdevice == PCI_ANY_ID || ids->subdevice == dev->subsystem_device) &&
+		    !((ids->class ^ dev->class) & ids->class_mask))
+			return ids;
+		ids++;
+	}
+	return NULL;
+}
+
+int
+pci_announce_device(struct pci_driver *drv, struct pci_dev *dev)
+{
+	const struct pci_device_id *id;
+	int ret = 0;
+
+	if (drv->id_table) {
+		id = pci_match_device(drv->id_table, dev);
+		if (!id) {
+			ret = 0;
+			goto out;
+		}
+	} else
+		id = NULL;
+
+	dev_probe_lock();
+	if (drv->probe(dev, id) >= 0) {
+		dev->driver = drv;
+		ret = 1;
+	}
+	dev_probe_unlock();
+out:
+	return ret;
+}
+
+/**
+ * pci_register_driver - register a new pci driver
+ * @drv: the driver structure to register
+ * 
+ * Adds the driver structure to the list of registered drivers
+ * Returns the number of pci devices which were claimed by the driver
+ * during registration.  The driver remains registered even if the
+ * return value is zero.
+ */
+int
+pci_register_driver(struct pci_driver *drv)
+{
+	struct pci_dev *dev;
+	int count = 0;
+
+	list_add_tail(&drv->node, &pci_drivers);
+	pci_for_each_dev(dev) {
+		if (!pci_dev_driver(dev))
+			count += pci_announce_device(drv, dev);
+	}
+	return count;
+}
+
+/**
+ * pci_unregister_driver - unregister a pci driver
+ * @drv: the driver structure to unregister
+ * 
+ * Deletes the driver structure from the list of registered PCI drivers,
+ * gives it a chance to clean up by calling its remove() function for
+ * each device it was responsible for, and marks those devices as
+ * driverless.
+ */
+
+void
+pci_unregister_driver(struct pci_driver *drv)
+{
+	struct pci_dev *dev;
+
+	list_del(&drv->node);
+	pci_for_each_dev(dev) {
+		if (dev->driver == drv) {
+			if (drv->remove)
+				drv->remove(dev);
+			dev->driver = NULL;
+		}
+	}
+}
+
+static struct pci_driver pci_compat_driver = {
+	name: "compat"
+};
+
+/**
+ * pci_dev_driver - get the pci_driver of a device
+ * @dev: the device to query
+ *
+ * Returns the appropriate pci_driver structure or %NULL if there is no 
+ * registered driver for the device.
+ */
+struct pci_driver *
+pci_dev_driver(const struct pci_dev *dev)
+{
+	if (dev->driver)
+		return dev->driver;
+	else {
+		int i;
+		for(i=0; i<=PCI_ROM_RESOURCE; i++)
+			if (dev->resource[i].flags & IORESOURCE_BUSY)
+				return &pci_compat_driver;
+	}
+	return NULL;
+}
 
 static int pci_device_suspend(struct device * dev, u32 state, u32 level)
 {
@@ -34,3 +163,8 @@ struct device_driver pci_device_driver = {
 	suspend:	pci_device_suspend,
 	resume:		pci_device_resume,
 };
+
+EXPORT_SYMBOL(pci_match_device);
+EXPORT_SYMBOL(pci_register_driver);
+EXPORT_SYMBOL(pci_unregister_driver);
+EXPORT_SYMBOL(pci_dev_driver);

drivers/pci/pool.c

+#include <linux/pci.h>
+#include <linux/module.h>
+
+/*
+ * Pool allocator ... wraps the pci_alloc_consistent page allocator, so
+ * small blocks are easily used by drivers for bus mastering controllers.
+ * This should probably be sharing the guts of the slab allocator.
+ */
+
+struct pci_pool {	/* the pool */
+	struct list_head	page_list;
+	spinlock_t		lock;
+	size_t			blocks_per_page;
+	size_t			size;
+	struct pci_dev		*dev;
+	size_t			allocation;
+	char			name [32];
+	wait_queue_head_t	waitq;
+};
+
+struct pci_page {	/* cacheable header for 'allocation' bytes */
+	struct list_head	page_list;
+	void			*vaddr;
+	dma_addr_t		dma;
+	unsigned long		bitmap [0];
+};
+
+#define	POOL_TIMEOUT_JIFFIES	((100 /* msec */ * HZ) / 1000)
+#define	POOL_POISON_BYTE	0xa7
+
+
+/**
+ * pci_pool_create - Creates a pool of pci consistent memory blocks, for dma.
+ * @name: name of pool, for diagnostics
+ * @pdev: pci device that will be doing the DMA
+ * @size: size of the blocks in this pool.
+ * @align: alignment requirement for blocks; must be a power of two
+ * @allocation: returned blocks won't cross this boundary (or zero)
+ * @mem_flags: SLAB_* flags.
+ *
+ * Returns a pci allocation pool with the requested characteristics, or
+ * null if one can't be created.  Given one of these pools, pci_pool_alloc()
+ * may be used to allocate memory.  Such memory will all have "consistent"
+ * DMA mappings, accessible by the device and its driver without using
+ * cache flushing primitives.  The actual size of blocks allocated may be
+ * larger than requested because of alignment.
+ *
+ * If allocation is nonzero, objects returned from pci_pool_alloc() won't
+ * cross that size boundary.  This is useful for devices which have
+ * addressing restrictions on individual DMA transfers, such as not crossing
+ * boundaries of 4KBytes.
+ */
+struct pci_pool *
+pci_pool_create (const char *name, struct pci_dev *pdev,
+	size_t size, size_t align, size_t allocation, int mem_flags)
+{
+	struct pci_pool		*retval;
+
+	if (align == 0)
+		align = 1;
+	if (size == 0)
+		return 0;
+	else if (size < align)
+		size = align;
+	else if ((size % align) != 0) {
+		size += align + 1;
+		size &= ~(align - 1);
+	}
+
+	if (allocation == 0) {
+		if (PAGE_SIZE < size)
+			allocation = size;
+		else
+			allocation = PAGE_SIZE;
+		// FIXME: round up for less fragmentation
+	} else if (allocation < size)
+		return 0;
+
+	if (!(retval = kmalloc (sizeof *retval, mem_flags)))
+		return retval;
+
+	strncpy (retval->name, name, sizeof retval->name);
+	retval->name [sizeof retval->name - 1] = 0;
+
+	retval->dev = pdev;
+	INIT_LIST_HEAD (&retval->page_list);
+	spin_lock_init (&retval->lock);
+	retval->size = size;
+	retval->allocation = allocation;
+	retval->blocks_per_page = allocation / size;
+	init_waitqueue_head (&retval->waitq);
+
+	return retval;
+}
+
+
+static struct pci_page *
+pool_alloc_page (struct pci_pool *pool, int mem_flags)
+{
+	struct pci_page	*page;
+	int		mapsize;
+
+	mapsize = pool->blocks_per_page;
+	mapsize = (mapsize + BITS_PER_LONG - 1) / BITS_PER_LONG;
+	mapsize *= sizeof (long);
+
+	page = (struct pci_page *) kmalloc (mapsize + sizeof *page, mem_flags);
+	if (!page)
+		return 0;
+	page->vaddr = pci_alloc_consistent (pool->dev,
+					    pool->allocation,
+					    &page->dma);
+	if (page->vaddr) {
+		memset (page->bitmap, 0xff, mapsize);	// bit set == free
+#ifdef	CONFIG_DEBUG_SLAB
+		memset (page->vaddr, POOL_POISON_BYTE, pool->allocation);
+#endif
+		list_add (&page->page_list, &pool->page_list);
+	} else {
+		kfree (page);
+		page = 0;
+	}
+	return page;
+}
+
+
+static inline int
+is_page_busy (int blocks, unsigned long *bitmap)
+{
+	while (blocks > 0) {
+		if (*bitmap++ != ~0UL)
+			return 1;
+		blocks -= BITS_PER_LONG;
+	}
+	return 0;
+}
+
+static void
+pool_free_page (struct pci_pool *pool, struct pci_page *page)
+{
+	dma_addr_t	dma = page->dma;
+
+#ifdef	CONFIG_DEBUG_SLAB
+	memset (page->vaddr, POOL_POISON_BYTE, pool->allocation);
+#endif
+	pci_free_consistent (pool->dev, pool->allocation, page->vaddr, dma);
+	list_del (&page->page_list);
+	kfree (page);
+}
+
+
+/**
+ * pci_pool_destroy - destroys a pool of pci memory blocks.
+ * @pool: pci pool that will be destroyed
+ *
+ * Caller guarantees that no more memory from the pool is in use,
+ * and that nothing will try to use the pool after this call.
+ */
+void
+pci_pool_destroy (struct pci_pool *pool)
+{
+	unsigned long		flags;
+
+	spin_lock_irqsave (&pool->lock, flags);
+	while (!list_empty (&pool->page_list)) {
+		struct pci_page		*page;
+		page = list_entry (pool->page_list.next,
+				struct pci_page, page_list);
+		if (is_page_busy (pool->blocks_per_page, page->bitmap)) {
+			printk (KERN_ERR "pci_pool_destroy %s/%s, %p busy\n",
+				pool->dev ? pool->dev->slot_name : NULL,
+				pool->name, page->vaddr);
+			/* leak the still-in-use consistent memory */
+			list_del (&page->page_list);
+			kfree (page);
+		} else
+			pool_free_page (pool, page);
+	}
+	spin_unlock_irqrestore (&pool->lock, flags);
+	kfree (pool);
+}
+
+
+/**
+ * pci_pool_alloc - get a block of consistent memory
+ * @pool: pci pool that will produce the block
+ * @mem_flags: SLAB_KERNEL or SLAB_ATOMIC
+ * @handle: pointer to dma address of block
+ *
+ * This returns the kernel virtual address of a currently unused block,
+ * and reports its dma address through the handle.
+ * If such a memory block can't be allocated, null is returned.
+ */
+void *
+pci_pool_alloc (struct pci_pool *pool, int mem_flags, dma_addr_t *handle)
+{
+	unsigned long		flags;
+	struct list_head	*entry;
+	struct pci_page		*page;
+	int			map, block;
+	size_t			offset;
+	void			*retval;
+
+restart:
+	spin_lock_irqsave (&pool->lock, flags);
+	list_for_each (entry, &pool->page_list) {
+		int		i;
+		page = list_entry (entry, struct pci_page, page_list);
+		/* only cachable accesses here ... */
+		for (map = 0, i = 0;
+				i < pool->blocks_per_page;
+				i += BITS_PER_LONG, map++) {
+			if (page->bitmap [map] == 0)
+				continue;
+			block = ffz (~ page->bitmap [map]);
+			if ((i + block) < pool->blocks_per_page) {
+				clear_bit (block, &page->bitmap [map]);
+				offset = (BITS_PER_LONG * map) + block;
+				offset *= pool->size;
+				goto ready;
+			}
+		}
+	}
+	if (!(page = pool_alloc_page (pool, mem_flags))) {
+		if (mem_flags == SLAB_KERNEL) {
+			DECLARE_WAITQUEUE (wait, current);
+
+			current->state = TASK_INTERRUPTIBLE;
+			add_wait_queue (&pool->waitq, &wait);
+			spin_unlock_irqrestore (&pool->lock, flags);
+
+			schedule_timeout (POOL_TIMEOUT_JIFFIES);
+
+			current->state = TASK_RUNNING;
+			remove_wait_queue (&pool->waitq, &wait);
+			goto restart;
+		}
+		retval = 0;
+		goto done;
+	}
+
+	clear_bit (0, &page->bitmap [0]);
+	offset = 0;
+ready:
+	retval = offset + page->vaddr;
+	*handle = offset + page->dma;
+done:
+	spin_unlock_irqrestore (&pool->lock, flags);
+	return retval;
+}
+
+
+static struct pci_page *
+pool_find_page (struct pci_pool *pool, dma_addr_t dma)
+{
+	unsigned long		flags;
+	struct list_head	*entry;
+	struct pci_page		*page;
+
+	spin_lock_irqsave (&pool->lock, flags);
+	list_for_each (entry, &pool->page_list) {
+		page = list_entry (entry, struct pci_page, page_list);
+		if (dma < page->dma)
+			continue;
+		if (dma < (page->dma + pool->allocation))
+			goto done;
+	}
+	page = 0;
+done:
+	spin_unlock_irqrestore (&pool->lock, flags);
+	return page;
+}
+
+
+/**
+ * pci_pool_free - put block back into pci pool
+ * @pool: the pci pool holding the block
+ * @vaddr: virtual address of block
+ * @dma: dma address of block
+ *
+ * Caller promises neither device nor driver will again touch this block
+ * unless it is first re-allocated.
+ */
+void
+pci_pool_free (struct pci_pool *pool, void *vaddr, dma_addr_t dma)
+{
+	struct pci_page		*page;
+	unsigned long		flags;
+	int			map, block;
+
+	if ((page = pool_find_page (pool, dma)) == 0) {
+		printk (KERN_ERR "pci_pool_free %s/%s, %p/%lx (bad dma)\n",
+			pool->dev ? pool->dev->slot_name : NULL,
+			pool->name, vaddr, (unsigned long) dma);
+		return;
+	}
+
+	block = dma - page->dma;
+	block /= pool->size;
+	map = block / BITS_PER_LONG;
+	block %= BITS_PER_LONG;
+
+#ifdef	CONFIG_DEBUG_SLAB
+	if (((dma - page->dma) + (void *)page->vaddr) != vaddr) {
+		printk (KERN_ERR "pci_pool_free %s/%s, %p (bad vaddr)/%lx\n",
+			pool->dev ? pool->dev->slot_name : NULL,
+			pool->name, vaddr, (unsigned long) dma);
+		return;
+	}
+	if (page->bitmap [map] & (1UL << block)) {
+		printk (KERN_ERR "pci_pool_free %s/%s, dma %x already free\n",
+			pool->dev ? pool->dev->slot_name : NULL,
+			pool->name, dma);
+		return;
+	}
+	memset (vaddr, POOL_POISON_BYTE, pool->size);
+#endif
+
+	spin_lock_irqsave (&pool->lock, flags);
+	set_bit (block, &page->bitmap [map]);
+	if (waitqueue_active (&pool->waitq))
+		wake_up (&pool->waitq);
+	/*
+	 * Resist a temptation to do
+	 *    if (!is_page_busy(bpp, page->bitmap)) pool_free_page(pool, page);
+	 * it is not interrupt safe. Better have empty pages hang around.
+	 */
+	spin_unlock_irqrestore (&pool->lock, flags);
+}
+
+
+EXPORT_SYMBOL (pci_pool_create);
+EXPORT_SYMBOL (pci_pool_destroy);
+EXPORT_SYMBOL (pci_pool_alloc);
+EXPORT_SYMBOL (pci_pool_free);

drivers/pci/power.c

+#include <linux/pci.h>
+#include <linux/pm.h>
+
+/*
+ * PCI Power management..
+ *
+ * This needs to be done centralized, so that we power manage PCI
+ * devices in the right order: we should not shut down PCI bridges
+ * before we've shut down the devices behind them, and we should
+ * not wake up devices before we've woken up the bridge to the
+ * device.. Eh?
+ *
+ * We do not touch devices that don't have a driver that exports
+ * a suspend/resume function. That is just too dangerous. If the default
+ * PCI suspend/resume functions work for a device, the driver can
+ * easily implement them (ie just have a suspend function that calls
+ * the pci_set_power_state() function).
+ */
+
+static int pci_pm_save_state_device(struct pci_dev *dev, u32 state)
+{
+	int error = 0;
+	if (dev) {
+		struct pci_driver *driver = dev->driver;
+		if (driver && driver->save_state) 
+			error = driver->save_state(dev,state);
+	}
+	return error;
+}
+
+static int pci_pm_suspend_device(struct pci_dev *dev, u32 state)
+{
+	int error = 0;
+	if (dev) {
+		struct pci_driver *driver = dev->driver;
+		if (driver && driver->suspend)
+			error = driver->suspend(dev,state);
+	}
+	return error;
+}
+
+static int pci_pm_resume_device(struct pci_dev *dev)
+{
+	int error = 0;
+	if (dev) {
+		struct pci_driver *driver = dev->driver;
+		if (driver && driver->resume)
+			error = driver->resume(dev);
+	}
+	return error;
+}
+
+static int pci_pm_save_state_bus(struct pci_bus *bus, u32 state)
+{
+	struct list_head *list;
+	int error = 0;
+
+	list_for_each(list, &bus->children) {
+		error = pci_pm_save_state_bus(pci_bus_b(list),state);
+		if (error) return error;
+	}
+	list_for_each(list, &bus->devices) {
+		error = pci_pm_save_state_device(pci_dev_b(list),state);
+		if (error) return error;
+	}
+	return 0;
+}
+
+static int pci_pm_suspend_bus(struct pci_bus *bus, u32 state)
+{
+	struct list_head *list;
+
+	/* Walk the bus children list */
+	list_for_each(list, &bus->children) 
+		pci_pm_suspend_bus(pci_bus_b(list),state);
+
+	/* Walk the device children list */
+	list_for_each(list, &bus->devices)
+		pci_pm_suspend_device(pci_dev_b(list),state);
+	return 0;
+}
+
+static int pci_pm_resume_bus(struct pci_bus *bus)
+{
+	struct list_head *list;
+
+	/* Walk the device children list */
+	list_for_each(list, &bus->devices)
+		pci_pm_resume_device(pci_dev_b(list));
+
+	/* And then walk the bus children */
+	list_for_each(list, &bus->children)
+		pci_pm_resume_bus(pci_bus_b(list));
+	return 0;
+}
+
+static int pci_pm_save_state(u32 state)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+	int error = 0;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		error = pci_pm_save_state_bus(bus,state);
+		if (!error)
+			error = pci_pm_save_state_device(bus->self,state);
+	}
+	return error;
+}
+
+static int pci_pm_suspend(u32 state)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		pci_pm_suspend_bus(bus,state);
+		pci_pm_suspend_device(bus->self,state);
+	}
+	return 0;
+}
+
+static int pci_pm_resume(void)
+{
+	struct list_head *list;
+	struct pci_bus *bus;
+
+	list_for_each(list, &pci_root_buses) {
+		bus = pci_bus_b(list);
+		pci_pm_resume_device(bus->self);
+		pci_pm_resume_bus(bus);
+	}
+	return 0;
+}
+
+static int 
+pci_pm_callback(struct pm_dev *pm_device, pm_request_t rqst, void *data)
+{
+	int error = 0;
+
+	switch (rqst) {
+	case PM_SAVE_STATE:
+		error = pci_pm_save_state((unsigned long)data);
+		break;
+	case PM_SUSPEND:
+		error = pci_pm_suspend((unsigned long)data);
+		break;
+	case PM_RESUME:
+		error = pci_pm_resume();
+		break;
+	default: break;
+	}
+	return error;
+}
+
+static int __init pci_pm_init(void)
+{
+	pm_register(PM_PCI_DEV, 0, pci_pm_callback);
+	return 0;
+}
+
+subsys_initcall(pci_pm_init);

drivers/pci/proc.c

@@ -6,11 +6,9 @@
  *	Copyright (c) 1997--1999 Martin Mares <mj@ucw.cz>
  */
 
-#include <linux/types.h>
-#include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 #include <linux/proc_fs.h>
-#include <linux/init.h>
 #include <linux/seq_file.h>
 #include <linux/smp_lock.h>
 
@@ -615,3 +613,11 @@ static int __init pci_proc_init(void)
 }
 
 __initcall(pci_proc_init);
+
+#ifdef CONFIG_HOTPLUG
+EXPORT_SYMBOL(pci_proc_attach_device);
+EXPORT_SYMBOL(pci_proc_detach_device);
+EXPORT_SYMBOL(pci_proc_attach_bus);
+EXPORT_SYMBOL(pci_proc_detach_bus);
+#endif
+

drivers/pci/search.c

+#include <linux/pci.h>
+#include <linux/module.h>
+
+/**
+ * pci_find_slot - locate PCI device from a given PCI slot
+ * @bus: number of PCI bus on which desired PCI device resides
+ * @devfn: encodes number of PCI slot in which the desired PCI 
+ * device resides and the logical device number within that slot 
+ * in case of multi-function devices.
+ *
+ * Given a PCI bus and slot/function number, the desired PCI device 
+ * is located in system global list of PCI devices.  If the device
+ * is found, a pointer to its data structure is returned.  If no 
+ * device is found, %NULL is returned.
+ */
+struct pci_dev *
+pci_find_slot(unsigned int bus, unsigned int devfn)
+{
+	struct pci_dev *dev;
+
+	pci_for_each_dev(dev) {
+		if (dev->bus->number == bus && dev->devfn == devfn)
+			return dev;
+	}
+	return NULL;
+}
+
+/**
+ * pci_find_subsys - begin or continue searching for a PCI device by vendor/subvendor/device/subdevice id
+ * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
+ * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
+ * @ss_vendor: PCI subsystem vendor id to match, or %PCI_ANY_ID to match all vendor ids
+ * @ss_device: PCI subsystem device id to match, or %PCI_ANY_ID to match all device ids
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices.  If a PCI device is
+ * found with a matching @vendor, @device, @ss_vendor and @ss_device, a pointer to its
+ * device structure is returned.  Otherwise, %NULL is returned.
+ * A new search is initiated by passing %NULL to the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device on the global list.
+ */
+struct pci_dev *
+pci_find_subsys(unsigned int vendor, unsigned int device,
+		unsigned int ss_vendor, unsigned int ss_device,
+		const struct pci_dev *from)
+{
+	struct list_head *n = from ? from->global_list.next : pci_devices.next;
+
+	while (n != &pci_devices) {
+		struct pci_dev *dev = pci_dev_g(n);
+		if ((vendor == PCI_ANY_ID || dev->vendor == vendor) &&
+		    (device == PCI_ANY_ID || dev->device == device) &&
+		    (ss_vendor == PCI_ANY_ID || dev->subsystem_vendor == ss_vendor) &&
+		    (ss_device == PCI_ANY_ID || dev->subsystem_device == ss_device))
+			return dev;
+		n = n->next;
+	}
+	return NULL;
+}
+
+
+/**
+ * pci_find_device - begin or continue searching for a PCI device by vendor/device id
+ * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
+ * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices.  If a PCI device is
+ * found with a matching @vendor and @device, a pointer to its device structure is
+ * returned.  Otherwise, %NULL is returned.
+ * A new search is initiated by passing %NULL to the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device on the global list.
+ */
+struct pci_dev *
+pci_find_device(unsigned int vendor, unsigned int device, const struct pci_dev *from)
+{
+	return pci_find_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from);
+}
+
+
+/**
+ * pci_find_class - begin or continue searching for a PCI device by class
+ * @class: search for a PCI device with this class designation
+ * @from: Previous PCI device found in search, or %NULL for new search.
+ *
+ * Iterates through the list of known PCI devices.  If a PCI device is
+ * found with a matching @class, a pointer to its device structure is
+ * returned.  Otherwise, %NULL is returned.
+ * A new search is initiated by passing %NULL to the @from argument.
+ * Otherwise if @from is not %NULL, searches continue from next device
+ * on the global list.
+ */
+struct pci_dev *
+pci_find_class(unsigned int class, const struct pci_dev *from)
+{
+	struct list_head *n = from ? from->global_list.next : pci_devices.next;
+
+	while (n != &pci_devices) {
+		struct pci_dev *dev = pci_dev_g(n);
+		if (dev->class == class)
+			return dev;
+		n = n->next;
+	}
+	return NULL;
+}
+
+EXPORT_SYMBOL(pci_find_class);
+EXPORT_SYMBOL(pci_find_device);
+EXPORT_SYMBOL(pci_find_slot);
+EXPORT_SYMBOL(pci_find_subsys);